AD976AARS - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD976AARS ✓ فعالAD976AARS جائزہ
An ADC is an interface component that converts a continuous analog voltage into a numeric digital value. The AD976A belongs to the successive-approximation ADC family, which repeatedly compares the sampled input against a generated reference value. Within the broader semiconductor hierarchy, this device is a data-converter IC, an interface IC, and a data-acquisition building block. Compared with flash or pipeline converters, its switched-caparitor SAR architecture is suited to moderate-speed, high-resolution measurements where parallel digital output and deterministic conversion are useful.
The principal operating characteristics are 16-bit resolution, 200 kSPS throughput, and operation from one 5 V supply. The Analog Devices manufacturer datasheet states that the AD976A consumes no more than 100 mW and that its reference can be internal or external. A 28-lead SSOP package provides a compact surface-mount option for instrumentation, industrial control, communications, and embedded measurement systems. The parallel interface exposes the conversion result directly without requiring a serial output protocol.
The AD976A contains a switched-capacitor SAR conversion core, a 2.5 V reference, and a parallel output interface. A 100 kSPS AD976 variant offers a lower conversion rate, while the AD976A doubles throughput to 200 kSPS. At every conversion, the device samples the analog input and performs a sequence of bit decisions to produce a 16-bit code. Because the output is parallel, timing margins between the converter, acquisition control logic, and downstream latch or processor interface remain important design considerations.
Typical uses include multichannel process-control acquisition, waveform digitization, communications demodulation, laboratory measurement equipment, and industrial sensor interfaces. In each case, the converter can sample a conditioned analog waveform and present each 16-bit result to digital logic at its parallel output. The single 5 V supply simplifies system power planning, while selectable internal or external reference voltage supports both standalone operation and precision system calibration.
Designers should provide stable analog and reference bypassing, account for digital-output timing when interfacing the parallel bus, and verify acquisition timing against the 200 kSPS conversion rate. Input-source impedance, acquisition time, signal bandwidth, and the system clock arrangement can affect achievable accuracy. The manufacturer pin-description table should be used to assign every trace and establish unambiguous logic levels before fabrication.
This product page combines the AD976AARS operating facts with package guidance, application analysis, verified family alternatives, and practical design considerations. It is intended to help engineers evaluate conversion speed, interface architecture, supply requirements, and replacement strategy before integrating the converter into a precision data-acquisition design.
کے لیے ڈراپ اِن متبادل AD976AARS — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں AD976AARS (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.
AD976ARS
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →AD976AARS زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ریزولوشن | 16 bit |
| Sampling Throughput | 200 kSPS |
| Converter Architecture | Successive approximation, switched-capacitor |
| Input Channel Count | 1 channel |
| سپلائی وولٹیج | 5 V |
| Internal Reference Voltage | 2.5 V |
| Reference Configuration | Internal or external |
| Output Interface | Parallel |
| Maximum Power Dissipation | 100 mW |
| Process Technology | BiCMOS |
| پیکیج | 28-lead SSOP |
| Total Pin Count | 28 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
| On-Chip Clock | Present |
| Operating Voltage | 5 V |
AD976AARS 28-lead ssop پن کنفیگریشن گائیڈ
AD976AARS (28-lead ssop پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AD976AARS.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
AD976AARS کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Process Monitoring, Waveform Data Acquisition, Communications Signal Digitization, Laboratory Measurement Equipment, Embedded Control and Monitoring, Audio and Control Signal Capture.
Industrial Process Monitoring
The AD976AARS fits industrial process-monitoring designs that digitize conditioned sensor signals and need 16-bit numerical resolution at up to 200 kSPS. Its single 5 V supply and parallel output interface simplify the relationship between the analog front end and downstream control logic. The converter can sample a voltage derived from pressure, temperature, level, or flow sensors after suitable conditioning. Because the digital results appear on parallel outputs, the acquisition controller can latch each code without a serial protocol. The design must still account for input acquisition time, settling behavior, sampling-clock timing, and isolation or protection requirements for industrial environments.
تجویز کردہ
Waveform Data Acquisition
The AD976AARS is useful in moderate-speed waveform acquisition systems where preserving 16-bit amplitude detail matters more than reaching megahertz-class sampling rates. A 200 kSPS conversion rate can capture process transients, control-loop signals, and low-frequency diagnostic waveforms when the analog front end provides suitable gain and bandwidth. The parallel output bus reduces serial-interface overhead and can connect directly to capture logic or a processor input port. The main design constraint is timing: external latches, bus direction control, and data processing must account for output delay and the converter’s acquisition and conversion intervals.
تجویز کردہ
Communications Signal Digitization
AD976AARS can serve in communications or demodulation front ends where a conditioned analog channel must be sampled into a 16-bit digital word. Its 200 kSPS rate and parallel interface allow the converter to feed downstream digital signal-processing logic with a straightforward timing structure. The device is most appropriate for lower-rate envelope, feedback, or baseband measurements rather than high-RF direct sampling. A practical implementation requires anti-alias filtering, controlled input drive, adequate reference stability, and synchronization between the sample clock and digital capture logic.
تجویز کردہ
Laboratory Measurement Equipment
The AD976AARS fits laboratory instruments that acquire moderate-bandwidth analog measurements while retaining 16-bit converter resolution. It can digitize sensor outputs, amplifier outputs, or other conditioned laboratory signals and transfer parallel codes into acquisition hardware. The internal 2.5 V reference supports a simpler instrument architecture, while external-reference operation can align the converter with a higher-precision system reference. For accurate results, designers should include input-range selection, reference filtering, calibration procedures, clock jitter control, and enough settling time between the source and the converter’s sample-and-hold node.
تجویز کردہ
Embedded Control and Monitoring
The AD976AARS can add high-resolution analog measurement to an embedded controller when the system requires continuous sampled data rather than only threshold comparisons. Its parallel output can be latched into digital logic at the system edge, while the 5 V supply arrangement supports integration with mixed-signal equipment. The 200 kSPS capability provides more temporal detail than the 100 kSPS AD976ARS family member. Embedded implementations must define the digital bus routing, sample-clock generation, overflow handling, and scaling between the converter code and the physical quantity being measured.
تجویز کردہ
Audio and Control Signal Capture
AD976AARS can be used to digitize lower-bandwidth audio, control, or diagnostic signals when the system values 16-bit resolution and direct parallel data access. The converter is suitable for signals that fit comfortably within the 200 kSPS sampling regime and have been appropriately amplified and filtered. The internal reference helps establish a repeatable conversion scale, while the parallel interface can feed an embedded signal processor or memory capture stage. The key trade-off is bandwidth rather than converter resolution: sampling above the intended signal band requires careful anti-alias filtering to prevent out-of-band energy from folding into the measurement.
تجویز کردہ
کے لیے انجینئرنگ ریفرنس ڈیٹا AD976AARS — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | AD976ARS |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 28-lead SSOP | 28-lead SSOP |
| Resolution | 16 bit | 16 bit |
| Sampling Throughput | 200 kSPS | 100 kSPS |
| Converter Architecture | Successive approximation, switched-capacitor | Successive approximation, switched-capacitor |
| Supply Voltage | 5 V | 5 V |
| Internal Reference | 2.5 V | 2.5 V |
| Output Interface | Parallel | Parallel |
| Maximum Power Dissipation | 100 mW | 100 mW |
اہم امتیازی خصوصیات
- Higher conversion throughput than the lower-rate AD976-family option (بمقابلہAD976ARS)
- Retains the family’s 16-bit switched-caparimeter architecture (بمقابلہAD976ARS)
- Single-supply and parallel-output implementation (بمقابلہAD976ARS)
ڈیزائن نوٹس
Route the analog input and reference connections away from the 16-bit parallel output bus. Place input and reference bypass capacitors close to their associated pins, keep the ground-return path short, and provide a quiet analog ground region where the board design permits. The parallel outputs can produce fast edge-related current transitions, so coupling into the input or reference network can appear as conversion error even when the converter itself is operating correctly.
Base acquisition timing on the manufacturer’s complete timing diagrams rather than only the 200 kSPS throughput figure. The input source must recharge the sampling network within the available acquisition interval, and the receiving logic must meet output-delay and setup requirements. For long parallel routes, use controlled-impedance routing, minimize stubbing, and place the receiving latch or buffer close enough to the converter to limit propagation and capacitive-loading effects.
Decouple the 5 V supply locally and verify ripple at the converter pins under digital-output activity. Keep the analog and reference supply paths separated from noisy switching and motor-supply nodes where practical. The manufacturer lists 100 mW as maximum power dissipation, but production thermal design should use the actual operating rate, output transition pattern, ambient temperature, and package thermal data to establish the allowable dissipation margin.
تعمیل کی معلومات
Compliance status was not established from the manufacturer product page or datasheet excerpts. Confirm current environmental and product qualification declarations before production release.