Analog Devices

AD976AARS - 16-Bit 200 kSPS SAR ADC | Analog Devices

MPN: AD976AARS ✓ 啟用中
5 V Vdss 28-lead SSOP Package Present Speed
MOQ: 1 |

AD976AARS 概覽

Analog Devices AD976AARS is a 16-bit successive-approximation analog-to-digital converter with a sampling throughput of 200 kSPS, a single 5 V supply, and a 28-lead SSOP package. The converter uses a switched-capacitor architecture and provides a high-speed parallel output interface for direct connection to digital acquisition logic. Its internal 2.5 V reference can also be configured for external-reference operation, giving designers flexibility in measurement-system calibration.

An ADC is an interface component that converts a continuous analog voltage into a numeric digital value. The AD976A belongs to the successive-approximation ADC family, which repeatedly compares the sampled input against a generated reference value. Within the broader semiconductor hierarchy, this device is a data-converter IC, an interface IC, and a data-acquisition building block. Compared with flash or pipeline converters, its switched-caparitor SAR architecture is suited to moderate-speed, high-resolution measurements where parallel digital output and deterministic conversion are useful.

The principal operating characteristics are 16-bit resolution, 200 kSPS throughput, and operation from one 5 V supply. The Analog Devices manufacturer datasheet states that the AD976A consumes no more than 100 mW and that its reference can be internal or external. A 28-lead SSOP package provides a compact surface-mount option for instrumentation, industrial control, communications, and embedded measurement systems. The parallel interface exposes the conversion result directly without requiring a serial output protocol.

The AD976A contains a switched-capacitor SAR conversion core, a 2.5 V reference, and a parallel output interface. A 100 kSPS AD976 variant offers a lower conversion rate, while the AD976A doubles throughput to 200 kSPS. At every conversion, the device samples the analog input and performs a sequence of bit decisions to produce a 16-bit code. Because the output is parallel, timing margins between the converter, acquisition control logic, and downstream latch or processor interface remain important design considerations.

Typical uses include multichannel process-control acquisition, waveform digitization, communications demodulation, laboratory measurement equipment, and industrial sensor interfaces. In each case, the converter can sample a conditioned analog waveform and present each 16-bit result to digital logic at its parallel output. The single 5 V supply simplifies system power planning, while selectable internal or external reference voltage supports both standalone operation and precision system calibration.

Designers should provide stable analog and reference bypassing, account for digital-output timing when interfacing the parallel bus, and verify acquisition timing against the 200 kSPS conversion rate. Input-source impedance, acquisition time, signal bandwidth, and the system clock arrangement can affect achievable accuracy. The manufacturer pin-description table should be used to assign every trace and establish unambiguous logic levels before fabrication.

This product page combines the AD976AARS operating facts with package guidance, application analysis, verified family alternatives, and practical design considerations. It is intended to help engineers evaluate conversion speed, interface architecture, supply requirements, and replacement strategy before integrating the converter into a precision data-acquisition design.

直接替換替代品,適用於 AD976AARS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: AD976AARS (相同外形與佔位) — 差異在於 Package.

Analog Devices
Package: 28-pin SSOP
比較對象 AD976AARS →

AD976ARS

✅ 直接替換 ⚠️ 規格未經驗證
Analog Devices
📦 28-lead SSOP
16 bit · 200 kSPS · Successive approximation, switched capacitor · 5 V · 2.5 V · 1 input, single-ended · High-speed parallel · 100 mW

聯絡詢價

查看資料表 →

AD976AARS 最大額定值與電氣特性

解析度 16 bit
Sampling Throughput 200 kSPS
Converter Architecture Successive approximation, switched-capacitor
Input Channel Count 1 channel
供應電壓 5 V
Internal Reference Voltage 2.5 V
Reference Configuration Internal or external
Output Interface Parallel
Maximum Power Dissipation 100 mW
Process Technology BiCMOS
封裝 28-lead SSOP
Total Pin Count 28 pins
安裝類型 Surface mount
On-Chip Clock Present
Operating Voltage 5 V

AD976AARS 28-lead ssop 腳位配置指南

AD976AARS(28-lead ssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

AD976AARS 的 28-lead ssop 封裝腳位圖

無詳細腳位定義資料: AD976AARS.

請參閱 資料表 以查看完整腳位配置。

典型應用

AD976AARS 適用於 6 應用s: Industrial Process Monitoring, Waveform Data Acquisition, Communications Signal Digitization, Laboratory Measurement Equipment, Embedded Control and Monitoring, Audio and Control Signal Capture.

🏭

Industrial Process Monitoring

The AD976AARS fits industrial process-monitoring designs that digitize conditioned sensor signals and need 16-bit numerical resolution at up to 200 kSPS. Its single 5 V supply and parallel output interface simplify the relationship between the analog front end and downstream control logic. The converter can sample a voltage derived from pressure, temperature, level, or flow sensors after suitable conditioning. Because the digital results appear on parallel outputs, the acquisition controller can latch each code without a serial protocol. The design must still account for input acquisition time, settling behavior, sampling-clock timing, and isolation or protection requirements for industrial environments.

📈

Waveform Data Acquisition

The AD976AARS is useful in moderate-speed waveform acquisition systems where preserving 16-bit amplitude detail matters more than reaching megahertz-class sampling rates. A 200 kSPS conversion rate can capture process transients, control-loop signals, and low-frequency diagnostic waveforms when the analog front end provides suitable gain and bandwidth. The parallel output bus reduces serial-interface overhead and can connect directly to capture logic or a processor input port. The main design constraint is timing: external latches, bus direction control, and data processing must account for output delay and the converter’s acquisition and conversion intervals.

🌐

Communications Signal Digitization

AD976AARS can serve in communications or demodulation front ends where a conditioned analog channel must be sampled into a 16-bit digital word. Its 200 kSPS rate and parallel interface allow the converter to feed downstream digital signal-processing logic with a straightforward timing structure. The device is most appropriate for lower-rate envelope, feedback, or baseband measurements rather than high-RF direct sampling. A practical implementation requires anti-alias filtering, controlled input drive, adequate reference stability, and synchronization between the sample clock and digital capture logic.

🔧

Laboratory Measurement Equipment

The AD976AARS fits laboratory instruments that acquire moderate-bandwidth analog measurements while retaining 16-bit converter resolution. It can digitize sensor outputs, amplifier outputs, or other conditioned laboratory signals and transfer parallel codes into acquisition hardware. The internal 2.5 V reference supports a simpler instrument architecture, while external-reference operation can align the converter with a higher-precision system reference. For accurate results, designers should include input-range selection, reference filtering, calibration procedures, clock jitter control, and enough settling time between the source and the converter’s sample-and-hold node.

🖥️

Embedded Control and Monitoring

The AD976AARS can add high-resolution analog measurement to an embedded controller when the system requires continuous sampled data rather than only threshold comparisons. Its parallel output can be latched into digital logic at the system edge, while the 5 V supply arrangement supports integration with mixed-signal equipment. The 200 kSPS capability provides more temporal detail than the 100 kSPS AD976ARS family member. Embedded implementations must define the digital bus routing, sample-clock generation, overflow handling, and scaling between the converter code and the physical quantity being measured.

🎧

Audio and Control Signal Capture

AD976AARS can be used to digitize lower-bandwidth audio, control, or diagnostic signals when the system values 16-bit resolution and direct parallel data access. The converter is suitable for signals that fit comfortably within the 200 kSPS sampling regime and have been appropriately amplified and filtered. The internal reference helps establish a repeatable conversion scale, while the parallel interface can feed an embedded signal processor or memory capture stage. The key trade-off is bandwidth rather than converter resolution: sampling above the intended signal band requires careful anti-alias filtering to prevent out-of-band energy from folding into the measurement.

What is the AD976AARS?
The AD976AARS is a 16-bit, single-channel successive-approximation ADC manufactured by Analog Devices. It converts an analog input to a 16-bit digital result at up to 200 kSPS, operates from a single 5 V supply, and uses a 28-lead SSOP package. According to the Analog Devices manufacturer datasheet, its switched-capacitor conversion core, 2.5 V internal reference, and high-speed parallel output interface make it suitable for precision data-acquisition systems requiring direct parallel digital output.
What is the conversion speed of AD976AARS?
The AD976AARS has a maximum sampling throughput of 200 kSPS. According to the Analog Devices manufacturer product page, the AD976A operates at 200 kSPS, while the related AD976 operates at 100 kSPS. This difference is important when choosing between the two converters: the AD976A provides twice the sampling rate but requires the acquisition circuit, digital interface, and downstream processing to support the faster conversion cadence.
What is the supply voltage of AD976AARS?
The AD976AARS operates from a single 5 V supply. The Analog Devices manufacturer datasheet identifies 5 V operation as a defining feature of the AD976 and AD976A converter family. This single-supply arrangement simplifies analog and digital power planning, although the converter still requires careful bypassing and clean layout around its analog input, reference, ground, and parallel data outputs.
Does AD976AARS use a serial or parallel interface?
The AD976AARS uses a high-speed parallel output interface. According to the Analog Devices manufacturer datasheet, each converted 16-bit result is presented across the device output pins rather than being serialized on a data line. This interface can reduce output-interface complexity in moderate-speed acquisition systems, but PCB routing must account for output timing, input capacitance, clock relationships, and the number of destinations receiving the bus.
What reference voltage does AD976AARS use?
The AD976AARS includes a 2.5 V internal reference and can also use an external reference. The Analog Devices manufacturer product page confirms both reference options. An internal reference simplifies standalone converter designs, while an external reference can support higher-level calibration or a shared measurement reference. The selected reference configuration must remain consistent with the converter’s input range and system calibration plan.
AD976AARS vs AD976ARS - which converter is faster?
The AD976AARS is faster, delivering 200 kSPS compared with the 100 kSPS rate of the AD976ARS. Both are 16-bit switched-caparitor successive-approximation converters in the AD976 family, and both use single 5 V operation according to the Analog Devices manufacturer datasheet. Choose the AD976AARS when acquisition timing requires the higher rate; choose the AD976ARS when 100 kSPS is sufficient and the lower-speed family member is preferred.
When should I choose AD976AARS over AD976ARS?
Choose the AD976AARS when the measurement system requires more than 100 kSPS acquisition speed or needs more samples during a defined transient event. The Analog Devices manufacturer product page specifies 200 kSPS for the AD976A and 100 kSPS for the AD976. The AD976ARS remains appropriate for slower measurements where its 16-bit resolution, switched-capacitor architecture, single 5 V supply, and parallel output are sufficient.
What can replace AD976AARS?
The closest same-footprint family replacement identified for AD976AARS is the AD976ARS in the 28-lead SSOP package, although its throughput is lower at 100 kSPS versus 200 kSPS. No five-part drop-in set was established from the available cross-reference records. According to the Analog Devices manufacturer product page, both converters use the same 16-bit switched-capacitor architecture and single 5 V supply, but the reduced sampling rate must be acceptable before substitution.
Is AD976AARS suitable for industrial data acquisition?
The AD976AARS is suitable for industrial data-acquisition designs that can use a 16-bit parallel-output converter operating from 5 V. Its 200 kSPS throughput supports moderate-speed process, waveform, and sensor measurements, while the internal 2.5 V reference simplifies basic systems. According to the Analog Devices manufacturer datasheet, the converter’s maximum power dissipation is 100 mW; production suitability still depends on temperature range, isolation, EMC, and qualification requirements.
Where can I download the AD976AARS datasheet PDF?
Download the AD976AARS documentation from the official Analog Devices AD976A product page or the linked AD976AARS PDF listed in this product’s data sources. The manufacturer datasheet is the preferred source for the complete pin-description table, electrical characteristics, timing diagrams, reference options, input-range details, and operating notes. It also distinguishes the AD976A’s 200 kSPS performance from the AD976’s 100 kSPS operation.
Where can I find the AD976AARS pinout?
The AD976AARS pinout is found in the pin-description table and package drawing in the Analog Devices manufacturer datasheet. The device uses a 28-lead SSOP package, so PCB designers should map every numbered lead directly from the manufacturer drawing rather than infer connections from another package variant. The package drawing also establishes the physical orientation and pin-1 location needed when checking footprint alignment and signal assignment.
How much power does AD976AARS dissipate?
The AD976AARS dissipates a maximum of 100 mW according to the Analog Devices manufacturer product page. This maximum specification should be used as the thermal-design ceiling rather than an expected operating value. Actual dissipation depends on supply voltage, operating rate, reference choice, digital-output activity, and ambient conditions, so a production thermal calculation should use measured or worst-case operating conditions and the applicable package thermal information.
Where to buy AD976AARS online?
Use the “Request a Quote” form on this page to request AD976AARS availability, current lead time, and a quotation. The form is the appropriate channel for a quote-based electronic component purchase and avoids presenting stale commercial terms as current stock information. When requesting the quote, identify the exact AD976AARS MPN, required quantity, 28-lead SSOP package, and whether delivery in the standard tube packaging is acceptable.
What is the price of AD976AARS?
The current commercial terms for AD976AARS should be obtained through the “Request a Quote” form on this page. The form can account for quantity, packaging, currency, and current market conditions without embedding a potentially stale price in the product description. Buyers should include the exact AD976AARS MPN and the required delivery quantity so the supplier can confirm the appropriate commercial basis and lead time.
Is AD976AARS in stock and what is its lead time?
Current AD976AARS stock status and lead time should be confirmed through the “Request a Quote” form on this page. Quote requests should state the required quantity, tube packaging preference, target date, and any acceptable alternate date for delivery. This approach is preferable to treating a distributor landing-page message as a guarantee because stock, production status, and lead time can change independently of the product’s technical characteristics.

工程參考資料,適用於 AD976AARS — 比較、設計指引及合規資訊。

選型指南

Choose AD976AARS when the measurement path requires 16-bit resolution and a sampling rate as high as 200 kSPS, particularly in industrial acquisition, waveform capture, communications, and laboratory systems. Its single 5 V supply, internal 2.5 V reference, and parallel output interface support direct connection to digital capture logic. The identified AD976ARS alternative uses the same 28-lead SSOP family configuration and preserves 16-bit resolution, but it is limited to 100 kSPS, making it suitable only when the acquisition sequence can operate at half the target rate. For applications where 200 kSPS is not required, AD976ARS may reduce timing demand. For waveforms with significant frequency content, check the analog bandwidth and anti-alias requirements before selecting either member, and use the manufacturer timing and pin diagrams to verify that the converter can settle correctly within the available acquisition interval.

與替代品比較

參數 本產品 AD976ARS
Brand Analog Devices Analog Devices
Package 28-lead SSOP 28-lead SSOP
Resolution 16 bit 16 bit
Sampling Throughput 200 kSPS 100 kSPS
Converter Architecture Successive approximation, switched-capacitor Successive approximation, switched-capacitor
Supply Voltage 5 V 5 V
Internal Reference 2.5 V 2.5 V
Output Interface Parallel Parallel
Maximum Power Dissipation 100 mW 100 mW

主要差異化特點

  • Higher conversion throughput than the lower-rate AD976-family option (對比AD976ARS)
  • Retains the family’s 16-bit switched-caparimeter architecture (對比AD976ARS)
  • Single-supply and parallel-output implementation (對比AD976ARS)

設計說明

Route the analog input and reference connections away from the 16-bit parallel output bus. Place input and reference bypass capacitors close to their associated pins, keep the ground-return path short, and provide a quiet analog ground region where the board design permits. The parallel outputs can produce fast edge-related current transitions, so coupling into the input or reference network can appear as conversion error even when the converter itself is operating correctly.

Base acquisition timing on the manufacturer’s complete timing diagrams rather than only the 200 kSPS throughput figure. The input source must recharge the sampling network within the available acquisition interval, and the receiving logic must meet output-delay and setup requirements. For long parallel routes, use controlled-impedance routing, minimize stubbing, and place the receiving latch or buffer close enough to the converter to limit propagation and capacitive-loading effects.

Decouple the 5 V supply locally and verify ripple at the converter pins under digital-output activity. Keep the analog and reference supply paths separated from noisy switching and motor-supply nodes where practical. The manufacturer lists 100 mW as maximum power dissipation, but production thermal design should use the actual operating rate, output transition pattern, ambient temperature, and package thermal data to establish the allowable dissipation margin.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance status was not established from the manufacturer product page or datasheet excerpts. Confirm current environmental and product qualification declarations before production release.

相關搜尋

AD976AARS datasheet AD976AARS datasheet pdf AD976AARS pinout AD976AARS specifications Analog Devices AD976AARS AD976AARS 16 bit ADC AD976AARS 200 kSPS AD976AARS 28 SSOP AD976AARS equivalent AD976AARS replacement AD976AARS vs AD976ARS AD976AARS price AD976AARS stock AD976AARS data acquisition AD976AARS parallel output

相關元件與詞彙

Analog Devices AD976AARS AD976ARS AD976A AD976 analog-to-digital converter ADC successive-approximation ADC SAR ADC switched-capacitor architecture parallel output interface BiCMOS single 5 V supply 2.5 V internal reference external reference 200 kSPS throughput 100 kSPS throughput 16-bit resolution 28-lead SSOP SSOP package surface mount industrial process monitoring waveform data acquisition laboratory measurement equipment anti-alias filtering
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情