Analog Devices

AD976BRRL - 16-Bit 100 kSPS SAR ADC | Analog Devices

MPN: AD976BRRL ✓ فعال
5 V single supply Vdss 28-SOIC, 0.295 in (7.50 mm) body width Package
MOQ: 1 |

AD976BRRL جائزہ

Analog Devices AD976BRRL is a 16-bit, 100 kSPS successive-approximation analog-to-digital converter operating from a single 5 V supply in a 28-pin SOIC package. It uses a switched-capacitor BiCMOS architecture and a parallel data interface. The converter combines 16-bit resolution with a 100 kSPS sampling rate for instrumentation, industrial control, and signal-acquisition systems.

An ADC is an analog-to-digital converter, a semiconductor that samples a continuously varying voltage and produces a corresponding digital code. The AD976 belongs to the successive-approximation ADC family, which compares the sampled input against a controlled reference and resolves each conversion bit in successive steps. Its switched-capacitor internal architecture supports accurate, repeatable conversion while allowing the device to operate from one 5 V supply.

Key features include 16-bit resolution, 100 kSPS throughput, one analog input, a parallel interface, and operation from a single 5 V source. The AD976 family is fabricated using Analog Devices' proprietary BiCMOS process, combining bipolar components with CMOS circuitry. The manufacturer also offers a related AD976A family with 200 kSPS throughput, while AD976BRRL remains the 100 kSPS member.

The parallel interface exposes the converted data directly across dedicated output pins, making the AD976BRRL suitable for systems where a microprocessor, digital signal processor, programmable logic device, or latch bank captures each conversion result. System timing must account for acquisition and conversion intervals, and the input driver must satisfy the converter's source-impedance requirements to allow the internal sampling network to settle accurately.

Typical uses include industrial process monitoring, instrumentation, laboratory data acquisition, communications equipment, embedded measurement systems, and control loops that require precise digitization without the throughput of a much faster converter. The 28-pin SOIC package also supports compact analog and digital routing on conventional through-hole assembly boards.

For reliable operation, use a clean 5 V supply and place the required bypass capacitors close to the device. Preserve the manufacturer's recommended analog and digital grounding arrangement, provide a low-impedance input source, and route the parallel output bus away from sensitive analog input traces. These measures reduce supply disturbance and switching-related conversion error.

This product page organizes the AD976BRRL's conversion rate, resolution, interface, package, ordering information, and practical selection considerations. It also distinguishes the 100 kSPS AD976 from the faster 200 kSPS AD976A and identifies the verified drop-in alternatives that can be used without changing the 28-pin SOIC footprint.

کے لیے ڈراپ اِن متبادل AD976BRRL — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

AD976BRZRL

✅ ڈراپ-اِن
📦 28-SOIC
Same 16-bit, 100 kSPS AD976-family conversion rate and 28-SOIC footprint; ordering-code and grade details differ and must be verified

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD976BRRL زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Converter Type Successive-approximation ADC
ریزولوشن 16 bit
سیمپلنگ ریٹ 100 kSPS
Analog Input Count 1 input
Architecture Switched-capacitor ADC
Process Technology Proprietary BiCMOS
سپلائی وولٹیج 5 V single supply
Data Interface Parallel
Output Data Width 16 bit
پیکیج 28-SOIC, 0.295 in (7.50 mm) body width
Terminal Count 28 terminals
ماؤنٹنگ ٹائپ Surface mount
Terminal Form Gull wing
Package Shape Rectangular
Packaging Tape and reel
Temperature Grade Industrial
Maximum Power Dissipation 100 mW
Internal Reference Selectable internal or external reference

AD976BRRL rectangular پن کنفیگریشن گائیڈ

AD976BRRL (rectangular پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

AD976BRRL کے لیے rectangular پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AD976BRRL.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

AD976BRRL کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Process Monitoring, Laboratory Data Acquisition, Industrial Control Systems, Communications Signal Conditioning, Embedded Measurement Systems, Audio and Vibration Measurement.

🏭

Industrial Process Monitoring

The AD976BRRL fits process-monitoring systems that digitize pressure, temperature, flow, or position signals at up to 100 kSPS. Its 16-bit resolution preserves fine amplitude detail, while the parallel interface allows a controller or logic device to capture each conversion without requiring a high-speed serial link. The single 5 V supply simplifies integration with industrial control electronics. The main design consideration is source impedance: the analog input driver should settle the converter’s switched-capacitor sampling network within the acquisition interval specified by Analog Devices. A clean 5 V rail and short analog traces are also important for avoiding conversion error in systems containing switching power converters.

🔧

Laboratory Data Acquisition

The AD976BRRL is suitable for laboratory instruments that sample quasi-static or moderately dynamic analog waveforms at 100 kSPS. A 16-bit code width supports detailed amplitude measurement, and the parallel output can feed a buffer, FPGA, or embedded controller with predictable acquisition timing. The 28-pin SOIC package also makes the converter practical for modular laboratory equipment built on conventional assembled circuit boards. Designers should preserve the manufacturer's recommended decoupling and grounding arrangement and verify that the source impedance, bandwidth, and input range satisfy the AD976 acquisition requirements. A 5 V reference or external reference arrangement must also follow the device’s specified configuration.

🏭

Industrial Control Systems

The AD976BRRL can serve as the analog front-end converter in closed-loop industrial control equipment that operates below the device’s 100 kSPS throughput limit. Its 16-bit resolution supports accurate feedback measurement, and the parallel bus simplifies direct connection to digital control logic. Single 5 V operation helps align the converter with common embedded control rails. For motor, actuator, or power-converter systems, the analog input must be conditioned to prevent out-of-range transients, and digital output activity should be routed away from the analog node. The acquisition path should include enough settling time for the converter’s switched-capacitor input and should be validated across the intended signal bandwidth.

🌐

Communications Signal Conditioning

The AD976BRRL is applicable to communications equipment that digitizes received or monitored analog channels at moderate rates. Its 16-bit resolution is useful when preserving signal amplitude information, while the 100 kSPS sampling capability and parallel interface support straightforward integration into channel-processing logic. The converter’s single 5 V supply can simplify board-level power planning, although system designers must isolate sensitive RF or baseband paths from digital switching noise. Proper bypass placement, a controlled reference configuration, and a low-noise analog input driver are necessary to maintain conversion quality. The selected sampling rate should also satisfy the applicable bandwidth and aliasing requirements rather than relying only on the converter’s nominal throughput.

🧩

Embedded Measurement Systems

The AD976BRRL is well suited to embedded measurement systems that convert one analog channel into a 16-bit parallel result for a microprocessor or digital signal controller. Its 100 kSPS maximum sampling rate supports many sensor and feedback signals while avoiding the routing and timing complexity of a high-speed serial ADC. The 28-pin SOIC package is convenient for leaded assembly and repair. To achieve consistent results, the input buffer must provide low noise and adequate settling, while the digital bus should be properly terminated according to the system architecture. Supply decoupling and analog grounding should follow the manufacturer layout guidance so that switching activity does not consume the converter’s available precision.

🎧

Audio and Vibration Measurement

The AD976BRRL can be used for audio or vibration acquisition paths whose useful bandwidth can be represented within a 100 kSPS sampling rate. The 16-bit resolution provides a substantial dynamic range for amplitude analysis, and the parallel interface allows each sample to be transferred into a digital processing chain. Input scaling must keep the signal within the converter’s permitted range, while anti-alias filtering must be selected for the actual sampling rate rather than the nominal conversion throughput alone. Low-noise analog routing, controlled grounding, and careful separation from digital clock and return currents are essential. The single 5 V operating requirement simplifies common test and measurement rails but does not remove the need for local supply bypassing.

What is the AD976BRRL?
The AD976BRRL is a 16-bit, 100 kSPS successive-approximation ADC from Analog Devices. According to the Analog Devices AD976 product page, it uses a switched-capacitor BiCMOS architecture, operates from a single 5 V supply, and provides a parallel data interface in a 28-pin SOIC package. It is intended for precision signal-acquisition and instrumentation systems requiring more than 100 kSPS throughput and 16-bit resolution.
What is the sampling rate of the AD976BRRL?
The AD976BRRL has a sampling rate of 100 kSPS, or 100,000 conversions per second. Analog Devices specifies 100 kSPS throughput for the AD976 family and 200 kSPS for the related AD976A family. This distinction is important when selecting a replacement because a 100 kSPS converter generally requires a different acquisition and timing budget from a 200 kSPS device.
What is the resolution and interface of AD976BRRL?
The AD976BRRL resolves analog inputs into 16-bit digital values and presents the results through a parallel interface. The Analog Devices AD976 product page identifies the converter as a high-speed, low-power 16-bit ADC with a switched-capacitor architecture. The parallel bus is useful with processors and programmable logic devices that can capture the full 16-bit result within the converter's timing specification.
What supply voltage does AD976BRRL require?
The AD976BRRL operates from a single 5 V supply. The Analog Devices manufacturer page specifically identifies single-supply operation as a product highlight. A clean supply and local bypass capacitors are important because supply disturbance can couple directly into the analog input and conversion result, particularly in systems containing switching converters or high-speed digital logic.
Where can I download the AD976BRRL datasheet PDF?
The AD976BRRL datasheet and product information are available from the official Analog Devices AD976 page at analog.com/en/products/ad976.html. Use the manufacturer datasheet for the complete pin description, electrical characteristics, timing diagrams, recommended application circuit, and package drawings. The third-party PDF at pdf.digi-electronics.com can also be consulted, but the manufacturer-controlled copy is the preferred reference for engineering decisions.
Where can I find the AD976BRRL pinout?
The AD976BRRL pin assignments are documented in the pin-description table of the Analog Devices AD976/AD976A datasheet. The device uses a 28-pin SOIC package with a parallel output bus, analog input, supply connections, ground connections, and reference-related pins. Use the datasheet pin table when assigning PCB nets because function labels and exposed board features must match the exact ordering code.
AD976BRRL vs AD976A — which converter should I choose?
Choose the AD976BRRL when 100 kSPS is sufficient, and choose the AD976A when the system requires 200 kSPS throughput. Analog Devices states that the AD976A doubles the sampling rate of the AD976 while retaining 16-bit resolution and single 5 V operation. Both families are offered in skinny 28-pin packages, but timing, acquisition bandwidth, and system data-acquisition requirements must be evaluated before interchangeability is assumed.
AD976BRRL vs AD976BR — are they the same converter?
The AD976BR and AD976BRRL both identify 16-bit, 100 kSPS, single-input SAR ADCs associated with the same AD976 device family. Their ordering suffixes can encode packaging and delivery details, so engineers should compare the complete ordering information and package drawing rather than relying on the base MPN alone. The listed AD976BR product is described as a 28-SOIC device, matching the target package family.
When should I choose AD976BRRL instead of a faster ADC?
Choose the AD976BRRL when the measured bandwidth requires no more than 100 kSPS sampling and the system benefits from a simple 16-bit parallel conversion interface. It can simplify timing, board routing, and downstream digital capture compared with a much faster converter. If acquisition bandwidth, latency, multiplexing, or signal-event detection demands more than 100 kSPS, evaluate the AD976A or another ADC with a higher specified sampling rate.
What is the best drop-in replacement for AD976BRRL?
The closest verified drop-in candidate is the Analog Devices AD976BRZRL, which uses the same 28-SOIC footprint and belongs to the 100 kSPS AD976 family. Confirm its ordering details, temperature grade, pin definitions, and supply requirements against the AD976BRRL before approving it as a replacement. The cross-reference search did not identify five distinct drop-in alternatives, so unverified competitor parts should not be treated as drop-in replacements.
Can AD976BRZRL replace AD976BRRL without PCB changes?
The AD976BRZRL can be considered a footprint-compatible replacement because it is an AD976-family converter in the same 28-SOIC package. Its conversion class remains a 16-bit, 100 kSPS SAR ADC, allowing the existing land pattern and parallel-bus routing to be retained. Before substitution, verify temperature grade, reference configuration, timing, and electrical limits in the Analog Devices ordering guide and datasheet.
Is AD976BRRL suitable for industrial instrumentation?
The AD976BRRL is suitable for industrial instrumentation when the required signal bandwidth fits its 100 kSPS sampling rate. The listed ordering information identifies an industrial temperature grade, and its 16-bit resolution supports precision measurement systems. Its single 5 V operation and parallel output simplify integration with embedded processors, while the 28-SOIC package is practical for conventional industrial control-board assembly.
How should I design the input and supply layout for AD976BRRL?
Place the required supply bypass capacitors close to the analog supply pins and provide a low-impedance drive to the analog input. Route the parallel output bus away from the analog input and sensitive reference networks, and use the manufacturer's recommended analog and digital grounding strategy. These steps reduce the likelihood that switching current, reference disturbance, or incomplete sampling will degrade the 16-bit conversion result.
How do I buy AD976BRRL online?
Use the Request a Quote form on this page to request AD976BRRL availability, order quantity, and current commercial terms. The form allows the sourcing request to be tied to the exact AD976BRRL ordering code, including its 28-SOIC tape-and-reel package. Availability and lead time should be confirmed for the required quantity before committing a production schedule.
What is the current price of AD976BRRL?
Use the Request a Quote form on this page for the current AD976BRRL commercial quote. The quote request preserves the exact MPN and package configuration while allowing current quantity pricing and availability to be confirmed. Static price figures can become outdated, particularly for older catalog ADCs, so they should not be used for budgeting or purchase authorization.
What is the lead time and stock status for AD976BRRL?
Request the current stock position, minimum order quantity, and lead time through the Request a Quote form on this page. The ordering code AD976BRRL identifies the industrial-grade, 28-SOIC tape-and-reel configuration. Confirm the quantity available for production scheduling directly on this page rather than relying on an unverified third-party stock indicator.

کے لیے انجینئرنگ ریفرنس ڈیٹا AD976BRRL — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose AD976BRRL when the application needs 16-bit resolution, no more than 100 kSPS throughput, a parallel data bus, and operation from one 5 V rail. It is especially convenient for embedded industrial and laboratory systems where a processor or programmable logic device can capture the parallel result directly. AD976BRZRL is the closest footprint-compatible family alternative when its ordering details, temperature grade, and electrical characteristics satisfy the system requirements. The AD976A is the appropriate choice when 200 kSPS throughput is required, but it is not a timing-equivalent substitute for AD976BRRL. For designs needing higher throughput, lower latency, greater channel count, or a smaller package, re-evaluate the ADC architecture rather than treating a package-compatible member as an automatic replacement.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ AD976BRZRL
Package 28-SOIC 28-SOIC - same
Brand Analog Devices Analog Devices
Resolution 16 bit 16 bit
Sampling Rate 100 kSPS 100 kSPS
Converter Architecture Successive-approximation, switched-capacitor Successive-approximation, switched-capacitor
Supply Voltage 5 V single supply 5 V single supply
Data Interface Parallel Parallel
Process Technology Proprietary BiCMOS Proprietary BiCMOS
Analog Input Count 1 input 1 input

اہم امتیازی خصوصیات

  • 16-bit resolution at a 100 kSPS sampling rate (بمقابلہAD976A)
  • Parallel digital output simplifies direct system capture (بمقابلہAD976A)
  • Single 5 V operation reduces supply complexity (بمقابلہAD976BRZRL)

ڈیزائن نوٹس

Place the required 5 V bypass capacitors immediately adjacent to the supply and ground pins, and route them through the shortest practical path. Keep the analog input and reference traces away from the 16-bit parallel output bus, especially clock and control lines. Use the analog and digital grounding arrangement specified in the manufacturer datasheet; separating noisy return currents prevents switching activity from appearing as errors on the converted code.

Design the analog source network so that it settles completely during the converter’s acquisition interval. The switched-capacitor input can draw transient charge during sampling, so a source impedance that is too high may cause incomplete settling and correlated conversion error. Use a low-noise buffer when the sensor or divider cannot present the required impedance, and include an anti-alias filter whose cutoff is appropriate for the 100 kSPS sampling rate.

Do not substitute the AD976A for the AD976BRRL without redesigning the acquisition timing. The AD976A is specified for 200 kSPS, while AD976BRRL is specified for 100 kSPS; the twofold throughput change alters signal-bandwidth, acquisition, and downstream timing assumptions. Also verify the complete ordering suffix, temperature grade, package drawing, and reference configuration before using AD976BRZRL as a replacement.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The AD976 product page and listed distributor information do not explicitly establish the requested environmental or material-compliance declarations. AEC-Q100 is not applicable because the AD976BRRL is an industrial ADC rather than an automotive-qualified device.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

AD976BRRL datasheet AD976BRRL pinout AD976BRRL datasheet pdf AD976BRRL specifications Analog Devices AD976BRRL AD976BRRL 16 bit 100 kSPS AD976BRRL 28-SOIC AD976BRRL parallel ADC AD976BRRL vs AD976A AD976BRRL equivalent AD976BRRL replacement AD976BRRL price AD976BRRL application circuit AD976BRRL footprint

متعلقہ اجزاء اور اصطلاحات

Analog Devices AD976BRRL AD976BRZRL AD976BR AD976A AD976 16-bit ADC successive-approximation ADC SAR ADC analog-to-digital converter switched-capacitor architecture parallel data interface 100 kSPS 5 V power supply BiCMOS 28-SOIC SOIC package family surface mount industrial instrumentation process monitoring data acquisition input settling anti-alias filtering power supply rejection
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں