Analog Devices

ADF4355BCPZ-RL7 - 6.8 GHz Fractional-N PLL Synthesizer | Analog Devices

MPN: ADF4355BCPZ-RL7 ✓ فعال
3.3 V Vdss 32-lead WFQFN with exposed pad Package 54 MHz to 6800 MHz Speed
MOQ: 1 |

ADF4355BCPZ-RL7 جائزہ

The Analog Devices ADF4355BCPZ-RL7 is a fractional-N or integer-N frequency synthesizer with an integrated voltage-controlled oscillator, covering 54 MHz to 6800 MHz in a 32-lead WFQFN exposed-pad package. It supports a 38-bit fractional modulus, 1.8 V-compatible logic, selectable RF output division, and separate 3.3 V and 5.0 V supply domains. The device is supplied on a 7-inch tape-and-reel reel and operates from -40°C to +85°C.

A fractional-N frequency synthesizer generates an accurate output frequency by combining a phase-locked loop with an integrated VCO and programmable divider. Its frequency resolution is set by a high-order fractional modulus, while integer-N operation provides a simpler configuration for applications that do not require fractional feedback. The ADF4355 belongs to the PLL synthesizer family within clock and timing integrated circuits, where it serves as a programmable RF clock source for communications, test equipment, and signal-generation systems.

The integrated VCO eliminates the need for an external VCO, reducing board area while supporting RF outputs up to 6.8 GHz. A 38-bit modulus enables fine channel spacing, and the output divider can be programmed from divide-by-1 through divide-by-64. The 3-wire control interface operates with 1.8 V-compatible logic, allowing direct connection to low-voltage control hardware. Analog and digital power are supplied at 3.3 V, while the charge-pump and VCO supply arrangement uses 5.0 V typical operation.

A practical implementation includes an external reference source, reference divider, loop filter, and output-matching network. The external loop filter determines loop bandwidth, phase noise, spur performance, and lock time, so component selection and PCB placement are as important as the synthesizer settings. Register programming controls the channel frequency, fractional value, output division, reference path, and power state. Hardware and software lock-detect functions support reliable frequency acquisition in production systems.

Typical uses include microwave and wideband RF signal generation, wireless communications test equipment, local oscillator generation, radar test systems, and instrumentation requiring programmable frequencies between 54 MHz and 6.8 GHz. The device is particularly useful when one synthesizer must cover multiple output dividers and closely spaced fractional-N channels without using multiple separate VCO assemblies.

For a reliable layout, place the loop-filter components and RF matching network close to their associated pins, maintain short return paths around the exposed pad, and follow the Analog Devices recommended decoupling arrangement. Confirm the external reference level and loop-filter values against the operating channel, divider ratio, and required phase-noise performance before production release.

This product page consolidates the RF frequency range, supply requirements, package information, application guidance, comparison considerations, and drop-in candidate assessment into one engineering-focused reference for ADF4355BCPZ-RL7 designs.

کے لیے ڈراپ اِن متبادل ADF4355BCPZ-RL7 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADF4355BCPZ-RL7 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Analog and Digital Supply Voltage, Charge Pump and VCO Supply Voltage, Device Type, Maximum RF Output Frequency.

Analog Devices
Analog and Digital Supply Voltage: 3.15 V to 3.45 V
Charge Pump and VCO Supply Voltage: 4.75 V to 5.25 V
Device Type: Phase-locked loop frequency synthesizer with integrated VCO
موازنہ کریں ADF4355BCPZ-RL7 →
Analog Devices
Package: 32-WFQFN exposed-pad CSP
Device Type: Fractional-N or integer-N RF clock/frequency synthesizer with integrated VCO
Maximum RF Output Frequency: 6800 MHz
موازنہ کریں ADF4355BCPZ-RL7 →
Analog Devices
Package: 32-lead LFCSP with exposed pad
Analog and Digital Supply Voltage: 3.15 V to 3.45 V
Charge Pump and VCO Supply Voltage: 4.75 V to 5.25 V
موازنہ کریں ADF4355BCPZ-RL7 →

ADF4355-3BCPZ

✅ ڈراپ-اِن
Analog Devices
📦 32-lead LFCSP with exposed pad
Phase-locked loop frequency synthesizer with integrated VCO · Fractional-N and integer-N · 6.6 GHz · 3.15 V to 3.45 V · 4.75 V to 5.25 V · 32-lead WFQFN with exposed pad · Programmable · Series of RF output frequency dividers

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADF4356BCPZ

✅ ڈراپ-اِن
Analog Devices
📦 32-lead LFCSP with exposed pad
Wideband PLL frequency synthesizer with integrated VCO · 6800 MHz · 53.125 MHz · Fractional-N and integer-N · 1 clock output · 3-wire serial interface · 3.15 V to 3.45 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADF4355BCPZ

✅ ڈراپ-اِن
Analog Devices
📦 32-lead LFCSP with exposed pad
Fractional-N or integer-N RF clock/frequency synthesizer with integrated VCO · 54 MHz to 6800 MHz · 6800 MHz · 54 MHz · 38 bit · 1, 2, 4, 8, 16, 32, or 64 · 1.8 V · 3.3 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADF4355BCPZ-RL7 تفصیلات

RF Output Frequency Range 54 MHz to 6800 MHz
Synthesizer Architecture Fractional-N or integer-N
Fractional Modulus 38 bit
Integrated VCO Yes
Programmable Output Divider Divide by 1, 2, 4, 8, 16, 32, or 64
Analog and Digital Supply Voltage 3.3 V
Charge Pump and VCO Supply Voltage 5.0 V typical
Logic Compatibility 1.8 V
Control Interface 3-wire serial interface
Lock Detect Analog and digital
Reference Input Frequency 10 MHz to 600 MHz
آپریٹنگ درجہ حرارت رینج -40°C to +85°C
پیکیج 32-lead WFQFN with exposed pad
Package Type LFCSP-32 with exposed pad
ماؤنٹنگ ٹائپ Surface mount
Shipping Format 7-inch tape-and-reel

ADF4355BCPZ-RL7 lfcsp-32 with exposed pad پن کنفیگریشن گائیڈ

ADF4355BCPZ-RL7 (lfcsp-32 with exposed pad پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ADF4355BCPZ-RL7 کے لیے lfcsp-32 with exposed pad پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADF4355BCPZ-RL7.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ADF4355BCPZ-RL7 کے لیے موزوں ہے 6 ایپلیکیشنs: Wideband RF Signal Generators, Communications Test Equipment, Microwave Instrumentation, Radar and Microwave Test Systems, Wireless Baseband and RF Evaluation, Industrial RF Measurement Systems.

📡

Wideband RF Signal Generators

The ADF4355BCPZ-RL7 fits wideband RF signal generators because its integrated VCO covers 54 MHz to 6800 MHz and its output divider supports division from 1 through 64. A designer can use fractional-N operation with the 38-bit modulus for fine frequency spacing while retaining integer-N operation for simpler configurations. The 3-wire control interface also simplifies frequency updates in automated test systems. External loop-filter and RF matching networks remain necessary to establish the intended phase-noise, spur, and output-amplitude performance on the completed board.

🌐

Communications Test Equipment

ADF4355BCPZ-RL7 is suitable for programmable communications test equipment requiring a local oscillator or RF reference with broad frequency coverage. Its 54 MHz to 6800 MHz output range supports multiple radio-frequency test bands, while the 38-bit fractional modulus provides fine channel selection. The programmable divide-by-1 through divide-by-64 output stages allow one RF chain to serve several measurement ranges. For production instruments, use the analog and digital lock-detect functions to prevent measurements from being taken before the PLL reaches its commanded frequency.

📺

Microwave Instrumentation

The ADF4355BCPZ-RL7 can serve as the integrated RF source in microwave instrumentation where a compact, programmable synthesizer is required. Covering outputs up to 6800 MHz, it eliminates the need for a discrete VCO and its associated matching components. The 32-lead exposed-pad package supports compact RF layouts, although its exposed thermal pad still requires adequate copper and via distribution. Engineers should tune the external loop filter against the required phase-noise floor and settling time, then validate output level across the selected divider ratios.

✈️

Radar and Microwave Test Systems

ADF4355BCPZ-RL7 is well matched to radar and microwave test systems that need a programmable RF excitation or local-oscillator source over a wide frequency span. The fractional-N architecture permits narrow synthesized steps, and the selectable output dividers support several RF test ranges from one device. Its 1.8 V-compatible control logic can be driven by low-voltage test-control hardware. System-level performance depends on the chosen reference source, external loop filter, RF output matching, and thermal layout, which must be characterized under the intended operating channel and load conditions.

🧩

Wireless Baseband and RF Evaluation

ADF4355BCPZ-RL7 supports wireless RF evaluation platforms that need programmable oscillator coverage without a separate VCO assembly. Its output reaches 6800 MHz, while selectable division and fractional-N settings allow designers to create multiple test tones or local-oscillator conditions. The 3-wire interface simplifies integration with FPGA-based or microcontroller-based control systems. Because the synthesizer still requires an external reference and loop filter, the evaluation board should provide clean supplies, short RF paths, and controlled impedance routing to obtain repeatable phase-noise and output-power measurements.

🏭

Industrial RF Measurement Systems

ADF4355BCPZ-RL7 fits industrial RF measurement systems that require repeatable programmable frequency generation across a wide operating band. Its integrated VCO reduces external RF-component count, and the -40°C to +85°C specification supports demanding equipment environments. The 38-bit fractional modulus allows precise channel placement, while analog and digital lock indication can coordinate measurement timing. Design the loop filter for the desired settling time and phase-noise balance, and confirm the RF output performance over temperature before deploying the system in factory or field test equipment.

What is the operating frequency range of ADF4355BCPZ-RL7?
The ADF4355BCPZ-RL7 generates RF output frequencies from 54 MHz to 6800 MHz. According to the Analog Devices ADF4355 datasheet, the integrated-VCO synthesizer supports fractional-N and integer-N operation across that range, with programmable output division from 1 through 64. This makes the device suitable for wideband RF signal generation, communications test, and configurable local-oscillator systems.
What type of frequency synthesizer is ADF4355BCPZ-RL7?
The ADF4355BCPZ-RL7 is a fractional-N and integer-N PLL frequency synthesizer with an integrated VCO. The Analog Devices ADF4355 datasheet identifies a 38-bit fractional modulus, a 3-wire programming interface, and RF operation from 54 MHz to 6800 MHz. Fractional-N mode supports fine frequency resolution, while integer-N mode provides a conventional integer-divider PLL configuration.
Where can I download the ADF4355BCPZ-RL7 datasheet PDF?
The ADF4355BCPZ-RL7 datasheet PDF is available from Analog Devices at the official ADF4355 datasheet address. The manufacturer document describes the 54 MHz to 6800 MHz RF range, 38-bit fractional modulus, 3.3 V analog and digital supplies, 5.0 V typical charge-pump and VCO supplies, 1.8 V-compatible logic, and the 32-lead exposed-pad package.
Where can I find the ADF4355BCPZ-RL7 pinout?
Use the pin-description table and package drawing in the Analog Devices ADF4355 datasheet to assign the 32-lead WFQFN exposed-pad connections. The device uses a 3-wire control interface and separate supply, RF, reference, and loop-filter connections. Request the complete pin map through the Request a Quote form if an annotated package drawing is required for PCB library creation.
What power supplies does ADF4355BCPZ-RL7 require?
The ADF4355BCPZ-RL7 uses 3.3 V for the analog and digital supplies and 5.0 V typical for the charge-pump and VCO power supplies. Its control logic is compatible with 1.8 V signals. The Analog Devices ADF4355 datasheet should be used to separate the supply pins and determine the required bypass capacitors before laying out the PCB.
How does ADF4355BCPZ-RL7 achieve fine frequency resolution?
The ADF4355BCPZ-RL7 achieves fine frequency resolution with a 38-bit fractional modulus in fractional-N mode. According to the Analog Devices ADF4355 datasheet, this high-order modulus produces small channel spacing while retaining programmable RF output coverage from 54 MHz to 6800 MHz. Integer-N operation remains available when fractional feedback is unnecessary.
What is the best drop-in replacement for ADF4355BCPZ-RL7?
ADF4355-3BCPZ is the closest documented drop-in candidate because it shares the 32-lead package and programming interface with ADF4355BCPZ-RL7. However, its power-supply limits and mute-function behavior must be checked against the original circuit before substitution. Use the Request a Quote form to confirm availability and obtain the appropriate ordering suffix for the required packaging format.
Can ADF4355-3BCPZ replace ADF4355BCPZ-RL7?
ADF4355-3BCPZ can replace ADF4355BCPZ-RL7 only after confirming the power rails and functional requirements. The cross-reference information identifies the parts as pin-compatible and sharing the same programming interface, while the Analog Devices ADF4355-3 product page specifies supply operation from 3.1515 V to 3.4485 V. Verify every supply, enable, and lock-detect connection before release.
ADF4355BCPZ-RL7 vs ADF4355-3BCPZ: which is better for a new design?
ADF4355BCPZ-RL7 is preferable when the design requires the ADF4355 supply arrangement or its documented mute and power-down behavior; ADF4355-3BCPZ is attractive when its specified 3.1515 V to 3.4485 V operating range matches the board supply. Both use the same 32-lead package and programming interface, but the choice depends on supply voltage and verified control behavior.
When should I choose ADF4355BCPZ-RL7 over ADF4356BCPZ?
Choose ADF4355BCPZ-RL7 when the existing RF design, reference divider settings, loop filter, and register configuration are based on the ADF4355. ADF4356BCPZ may share the package and temperature range, but a replacement should not be assumed to preserve every register function or RF characteristic. Review the manufacturer documentation and verify the complete control sequence during migration.
Is ADF4355BCPZ-RL7 suitable for RF test and measurement equipment?
Yes, ADF4355BCPZ-RL7 is suitable for programmable RF test and measurement equipment covering 54 MHz to 6800 MHz. Its integrated VCO, 38-bit fractional modulus, and programmable divide-by-1 through divide-by-64 outputs support multi-range signal sources and local-oscillator generation. The external loop filter and RF matching network remain critical to phase-noise and amplitude performance.
How do I minimize phase noise and spurs in an ADF4355BCPZ-RL7 design?
Start by selecting the external loop-filter components for the intended channel spacing, reference frequency, and required lock time. Keep the loop-filter network compact and grounded, decouple each supply domain independently, and follow the Analog Devices reference layout for the VCO and charge-pump connections. Final phase-noise and spur performance must be measured on the completed PCB because PCB parasitics and reference phase noise affect the result.
What controls the ADF4355BCPZ-RL7 output frequency?
The ADF4355BCPZ-RL7 output frequency is controlled through its 3-wire register interface using the reference path, divider settings, integer-N value, fractional-N value, and programmable output divider. The Analog Devices ADF4355 datasheet provides the register definitions and calculation sequence. Programming must also include valid lock-detect handling before the RF output is accepted as valid.
Where can I buy ADF4355BCPZ-RL7 and check the lead time?
Use the Request a Quote form on this page to request ADF4355BCPZ-RL7 availability, current lead time, and package-compatible order quantities. The ordering code indicates 7-inch tape-and-reel shipment, and the device is specified for -40°C to +85°C operation. A formal quotation confirms current lifecycle, allocation, and delivery status without relying on a static price.
What are the key specifications of ADF4355BCPZ-RL7 that engineers should know?
The ADF4355BCPZ-RL7 is a 54 MHz to 6800 MHz fractional-N or integer-N PLL synthesizer with an integrated VCO and 38-bit fractional modulus. It uses a 32-lead WFQFN exposed-pad package, 3.3 V analog and digital supplies, 5.0 V typical charge-pump and VCO supplies, 1.8 V-compatible logic, programmable division through 64, and analog plus digital lock detect.

کے لیے انجینئرنگ ریفرنس ڈیٹا ADF4355BCPZ-RL7 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose ADF4355BCPZ-RL7 when an RF design needs the established ADF4355 fractional-N and integer-N behavior, 54 MHz to 6800 MHz coverage, and a 32-lead exposed-pad footprint. Its separate 3.3 V analog/digital and 5.0 V typical charge-pump/VCO supply arrangement should be matched to the existing board design. Consider ADF4355-3BCPZ when its 3.1515 V to 3.4485 V supply range and pin- or software-controlled mute behavior align better with the application; verify the complete supply and register behavior before substitution. ADF4356BCPZ may suit a new evaluation based on the shared package, but it requires a more detailed functional review rather than assumption of register and RF equivalence. ADF4355BCPZ is the functionally closest base-device designation when the required reel format is acceptable. For all candidates, recalculate the loop filter and validate phase noise, spur levels, lock time, and RF output power on the final PCB.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ADF4355-3BCPZ ADF4356BCPZ ADF4355BCPZ
Package 32-lead LFCSP with exposed pad 32-lead LFCSP with exposed pad 32-lead LFCSP with exposed pad 32-lead LFCSP with exposed pad
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Fractional-N and integer-N PLL frequency synthesizer with integrated VCO Fractional-N PLL frequency synthesizer with integrated VCO Fractional-N PLL frequency synthesizer with integrated VCO Fractional-N and integer-N PLL frequency synthesizer with integrated VCO

اہم امتیازی خصوصیات

  • Broad integrated-VCO coverage (بمقابلہADF4355BCPZ)
  • Multi-supply compatibility with the established ADF4355 architecture (بمقابلہADF4355-3BCPZ)
  • 7-inch reel ordering configuration (بمقابلہADF4355BCPZ)
  • Programmable output flexibility (بمقابلہADF4356BCPZ)

ڈیزائن نوٹس

Implement the loop filter and RF matching networks close to their associated pins, using short ground returns and a continuous ground reference beneath the exposed pad. The 32-lead exposed-pad package requires thermal vias or equivalent copper paths to distribute heat while maintaining the manufacturer's recommended component spacing. Treat the RF output path as a controlled-impedance layout and keep the reference, charge-pump, and VCO return-current paths short.

Decouple the 3.3 V analog and digital domains and the 5.0 V typical charge-pump and VCO domains according to the reference schematic. Place bypass capacitors directly beside their relevant supply pins to suppress high-frequency coupling between the VCO, charge pump, and digital control sections. Do not assume the supply pins can share a single unrestricted plane connection; verify each rail's return path and voltage limits on the finished board.

Choose loop-filter values for the required reference frequency, channel spacing, lock time, and phase-noise target rather than copying a generic filter without recalculation. Use the analog and digital lock-detect functions to gate downstream measurements or RF-enable actions. Confirm settling at the lowest expected load and across temperature because reference phase noise, loop bandwidth, and PCB parasitics can alter practical performance.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The device is not identified as an automotive-qualified part in the available manufacturer information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or shipment declaration.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ADF4355BCPZ-RL7 datasheet ADF4355BCPZ-RL7 pinout ADF4355BCPZ-RL7 datasheet pdf ADF4355BCPZ-RL7 equivalent ADF4355BCPZ-RL7 replacement ADF4355BCPZ-RL7 cross reference ADF4355BCPZ-RL7 vs ADF4355-3BCPZ ADF4355BCPZ-RL7 footprint ADF4355BCPZ-RL7 application circuit Analog Devices ADF4355BCPZ-RL7 ADF4355 6.8 GHz synthesizer ADF4355BCPZ-RL7 price ADF4355BCPZ-RL7 stock

متعلقہ اجزاء اور اصطلاحات

Analog Devices ADF4355BCPZ-RL7 ADF4355BCPZ ADF4355-3BCPZ ADF4356BCPZ fractional-N frequency synthesizer integer-N frequency synthesizer phase-locked loop PLL integrated voltage-controlled oscillator integrated VCO 38-bit fractional modulus 54 MHz to 6800 MHz RF output programmable divider 3-wire control interface 1.8 V-compatible logic 3.3 V supply 5.0 V charge-pump supply loop filter RF matching network lock detect 32-lead LFCSP exposed pad surface-mount integrated circuit clock and timing IC
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں