ADM207EANZ - 230 kbps RS-232 Transceiver | Analog Devices
MPN: ADM207EANZ ✓ فعالADM207EANZ جائزہ
An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible logic. Within the product hierarchy, it belongs to interface ICs, communication transceivers, and RS-232 line-interface devices. This combination of drivers, receivers, and single-supply operation simplifies equipment requiring bidirectional serial connectivity over longer distances than a logic-level UART alone can support.
The ADM207EANZ provides five driver channels for transmitting data and three receiver channels for receiving data. Its maximum specified data rate of 230 kbps accommodates industrial serial links, point-of-sale equipment, test systems, and legacy peripheral interfaces. Operation from one +5 V supply reduces external power requirements, while CMOS implementation supports integration with digital control logic. The ADM207E product family also provides Shutdown and Enable controls on selected models.
The 24-pin PDIP package supports through-hole PCB assembly and is useful where field replacement, socketed construction, or repairability is important. The five-transmitter, three-receiver arrangement differs from many RS-232 transceivers that provide only one driver and one receiver, allowing several ports to share one interface package. Conversely, designs requiring four receivers should check whether the ADM208EANZ configuration better matches the channel count.
Typical uses include industrial control consoles, laboratory instrumentation, data acquisition equipment, serial adapters, and embedded systems communicating with legacy RS-232 peripherals. Because EIA-232E and CCITT V.28 behavior define the electrical interface, board-level implementation still requires careful treatment of ground references, cable routing, protection, and logic-level compatibility with the connected UART.
The most important design check is channel allocation. Five drivers and three receivers must be mapped against the required DTE or DCE signals before placement. Keep the transceiver and connector grounds together where required, route exposed interface leads away from sensitive logic, and use suitable protection components when cables leave the enclosure or connect to industrial equipment.
This page combines the manufacturer's family specifications with package details, sourced pricing, channel-level comparisons, and practical RS-232 design guidance. It also distinguishes true same-package alternatives from configuration changes that may require different signal assignments, helping engineers evaluate replacement choices before modifying an existing board.
کے لیے ڈراپ اِن متبادل ADM207EANZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADM207EANZ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Maximum Data Rate, Package, Supply Voltage.
ADM207EAN
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADM208EANZ
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADM207EANZ تفصیلات
| Product Type | RS-232 interface transceiver |
| Transmitter Channels | 5 channels |
| Receiver Channels | 3 channels |
| سپلائی وولٹیج | +5 V |
| Maximum Data Rate | 230 kbps |
| RS-232 Standard | EIA-232E |
| CCITT Standard | CCITT V.28 |
| Technology | CMOS |
| پیکیج | 24-pin PDIP |
| ماؤنٹنگ ٹائپ | Through-hole |
| پنز کی تعداد | 24 pins |
ADM207EANZ 24-pin pdip پن کنفیگریشن گائیڈ
ADM207EANZ (24-pin pdip پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADM207EANZ.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ADM207EANZ کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Consoles, Point-of-Sale Terminals, Laboratory Test Equipment, Data Acquisition Systems, Legacy Serial Adapters, Embedded Serial Communications.
Industrial Control Consoles
The ADM207EANZ fits industrial consoles that must connect several RS-232 peripherals through one interface package. Its five transmitters and three receivers provide more line-level channels than a basic one-driver, one-receiver transceiver, while single +5 V operation simplifies the power architecture. The 230 kbps maximum rate supports many legacy controller and data-acquisition protocols. Engineers should map each DTE or DCE signal before layout, then separate exposed cable routing from sensitive digital traces. The major trade-off is channel imbalance: applications needing a fourth receiver should evaluate ADM208EANZ instead.
تجویز کردہ
Point-of-Sale Terminals
The ADM207EANZ can support point-of-sale equipment that connects a printer, scanner, display interface, or other legacy peripheral through RS-232. Its five driver channels allow several outbound commands and status signals to share an interface IC, while three receivers can accept inbound device data. The 230 kbps capability is more than adequate for many peripheral protocols, subject to UART baud-rate and cable-length limits. Single +5 V operation also helps systems that lack legacy ±12 V rails. Pin assignment, logic levels, and connector polarity must match the selected DTE or DCE role.
تجویز کردہ
Laboratory Test Equipment
The ADM207EANZ is suitable for laboratory instruments that must communicate with older RS-232 analyzers, programmable supplies, or test fixtures. Multiple transmitter channels can drive separate control signals, and the three receiver channels can collect responses without requiring three separate interface packages. Its maximum 230 kbps rate supports instrument-control protocols operating within that limit. The CMOS implementation operates from +5 V and integrates well with digital control circuitry, although the receive logic thresholds must be compatible with the host. Use the family pin table for exact functions and protect external cables as required by the installation environment.
تجویز کردہ
Data Acquisition Systems
The ADM207EANZ can bridge a multi-channel data-acquisition controller to RS-232 instruments or legacy sensors. Three receiver channels support incoming measurement results or acknowledgments, while five transmitter channels can provide commands, enables, and routing signals. Operation from a single +5 V rail simplifies system partitioning around modern processors and FPGAs, and the 230 kbps maximum data rate suits many moderate-speed acquisition links. The interface still requires careful signal mapping, grounding, and isolation decisions. If the acquisition architecture requires four inbound channels, the ADM208EANZ's 4/4 configuration may be a better functional fit.
تجویز کردہ
Legacy Serial Adapters
The ADM207EANZ is appropriate for legacy serial adapters that add several RS-232 lines to a modern embedded controller. The five transmitters and three receivers can support multiple command and status paths while keeping the host side on a single +5 V supply. Its 230 kbps ceiling accommodates many legacy UART protocols without requiring a high-speed differential interface. The PDIP package remains practical for repairable or socketed industrial electronics. A critical design check is the relationship between host UART direction and the available driver and receiver counts; unused RS-232 lines should be handled according to the manufacturer's recommended circuit configuration.
تجویز کردہ
Embedded Serial Communications
The ADM207EANZ can provide a multi-channel RS-232 boundary for embedded systems connected to older service equipment or external controllers. Its single +5 V operation aligns with modern digital rails, while CMOS implementation supports compact communication logic. Five drivers and three receivers allow more flexible command, enable, and status routing than a conventional one-channel RS-232 interface. The 24-pin PDIP package is especially useful where through-hole maintenance is preferred. Designers must still validate UART logic levels, connector signaling, cable length, and ground references; when only one RS-232 direction is needed, a smaller transceiver may reduce board area.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADM207EANZ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADM207EAN | ADM208EANZ |
|---|---|---|---|
| Package | 24-pin PDIP | 24-pin PDIP | 24-pin PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Transmitter Channels | 5 channels | 5 channels | 4 channels |
| Receiver Channels | 3 channels | 3 channels | 4 channels |
| Mounting Type | Through-hole | Through-hole | Through-hole |
| Ordering Suffix | Z | Non-Z ordering code | Z |
اہم امتیازی خصوصیات
- Higher transmit-channel count than the ADM208EANZ (بمقابلہADM208EANZ)
- Retains the five-transmitter, three-receiver architecture in an alternate ordering code (بمقابلہADM207EAN)
- Single-supply operation avoids external ±12 V rails (بمقابلہADM208EANZ)
- Multi-channel RS-232 integration reduces interface IC count (بمقابلہMAX3221EIDBR)
ڈیزائن نوٹس
Assign every RS-232 line before routing the PCB. The ADM207EANZ provides five transmitter outputs and three receiver inputs, so a design requiring four inbound signals may require the ADM208EANZ or another transceiver. Confirm DTE versus DCE signal roles, UART direction, logic polarity, and connector pin numbering against the manufacturer pin-description table. Treat unused outputs and inputs according to the family's recommended termination rather than leaving them unexamined.
Keep the IC, supply decoupling, and connector interface routing compact, but keep external RS-232 conductors away from sensitive clocks, sensor inputs, and high-speed digital traces. Connect the transceiver and connector ground according to the system grounding strategy, especially when the cable introduces an earth potential difference. Route driver outputs directly toward their connector pins without long shared segments or sharp stubs. This separation reduces capacitive coupling and common-mode disturbance while preserving signal integrity.
Do not assume that the ADM207EANZ and ADM208EANZ are interchangeable solely because both use a 24-pin PDIP. Their transmitter-to-receiver ratios are 5/3 and 4/4 respectively, so one configuration may remove a required transmit path while adding a receive path. Validate the complete signal map, software expectations, cable wiring, and termination arrangement. Also confirm the UART logic levels and supply conditions before power-up because the RS-232 line interface does not eliminate all logic-level compatibility constraints.
تعمیل کی معلومات
The available ADM207E information references the EU EMC directive for the family, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration for ADM207EANZ is stated here. AEC-Q100 is not applicable to this general-purpose interface device.