ADM208EAN - 4/4 RS-232 Transceiver | Analog Devices
MPN: ADM208EAN ✓ فعالADM208EAN جائزہ
An RS-232 transceiver is an interface IC that combines the electrical driver and receiver functions required to connect CMOS logic with RS-232 serial equipment. The ADM208EAN provides four transmit channels and four receive channels, allowing one device to support multiple serial links or a combination of data, control, and status signals. It belongs to the broader line-driver and receiver hierarchy within interface ICs.
The manufacturer describes the ADM208 family as a +5 V CMOS RS-232 transceiver with four drivers and four receivers. Its 200 kBPS data rate is suitable for industrial-control, communications, instrumentation, and legacy peripheral interfaces where RS-232 remains required. The 0.1 µF charge-pump capacitor specification supports a compact implementation, while the integrated transceiver reduces the number of separate driver and receiver packages needed on the board.
EMI and EMC protection are important considerations for RS-232 equipment because external cables can introduce electrostatic discharge and conducted or radiated noise. The ADM208EAN documentation identifies ±15 kV ESD protection, including air-gap discharge, contact discharge, and human-body-model protection. The documentation also references fast-transient-burst immunity and low EMI emissions under EN 55022.
The ADM208EAN is suitable for equipment that needs several bidirectional or unidirectional RS-232 connections near a system edge. Industrial controllers, test equipment, data-acquisition systems, and legacy computer interfaces can use the four drivers and four receivers to reduce component count while keeping the RS-232 electrical interface standardized. The CMOS supply arrangement also helps interface directly with modern digital logic families.
Designers should use the pin-description and typical-application information in the manufacturer data sheet when assigning signals, placing protection devices, and selecting bypass capacitors. RS-232 voltage levels, cable length, grounding, and connector exposure should be checked against the system EMC and ESD requirements. The ADM208EAN is a production device listed by Analog Devices with a product page and current manufacturer documentation.
This product data combines the manufacturer family description, distributor identification, RS-232 application context, and engineering guidance for EMI, ESD, PCB layout, and system integration.
کے لیے ڈراپ اِن متبادل ADM208EAN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
ADM208EANZ
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX208ECNG+
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADM208EAN تفصیلات
| Product Type | RS-232 transceiver |
| Driver and Receiver Configuration | 4 drivers and 4 receivers |
| سپلائی وولٹیج | +5 V |
| Logic Technology | CMOS |
| Maximum Data Rate | 200 kBPS |
| Charge-Pump Capacitor | 0.1 µF |
| ESD Protection, Air-Gap Discharge | ±15 kV |
| ESD Protection, Contact Discharge | ±8 kV |
| ESD Protection, Human Body Model | ±15 kV |
| EMC Directive | 89/336/EEC |
| Fast Transient Burst Immunity | IEC 1000-4-4 |
| EMI Emissions Reference | EN 55022 |
| پیکیج | 24-PDIP, 24-pin plastic DIP |
| ماؤنٹنگ ٹائپ | Through-hole |
| پنز کی تعداد | 24 pins |
ADM208EAN 24-pdip, 24-pin plastic dip پن کنفیگریشن گائیڈ
ADM208EAN (24-pdip, 24-pin plastic dip پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADM208EAN.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ADM208EAN کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial RS-232 Control Interfaces, Data-Acquisition and Instrumentation, Legacy Computer and Peripheral Connectivity, RS-232 Test Equipment, Security and Access-Control Systems, Communication Port Concentrators.
Industrial RS-232 Control Interfaces
The ADM208EAN fits industrial controllers that require several RS-232 channels for equipment control, status reporting, and service communication. Its four drivers and four receivers consolidate up to eight directional line functions into one 24-PDIP device, while the 200 kBPS rate matches many legacy automation and instrumentation links. The documented ±15 kV air-gap ESD protection is especially relevant when controller ports connect to external cables. Designers should still provide suitable connector grounding, enclosure design, and cable-level protection, because the IC rating alone does not guarantee compliance in a finished system.
تجویز کردہ
Data-Acquisition and Instrumentation
The ADM208EAN is appropriate for laboratory and process-instrumentation equipment that must communicate with older RS-232 analyzers, fixtures, or computers. Four receivers can collect multiple status or measurement-channel signals, while four drivers support outbound commands and acknowledgements. Its +5 V CMOS operation and 0.1 µF charge-pump capacitors suit conventional embedded control hardware, and its 200 kBPS maximum rate is adequate for many measurement-control protocols. Keep the analog and digital grounds arranged to minimize return current through signal conductors, and validate grounding at the connector because RS-232 is unbalanced.
تجویز کردہ
Legacy Computer and Peripheral Connectivity
The ADM208EAN can preserve compatibility with legacy RS-232 ports in industrial computers, service consoles, adapters, and peripheral-control boards. Its four-channel transmitter and receiver arrangement allows one interface IC to serve several unidirectional control signals or multiple bidirectional ports, reducing board area compared with separate single-channel devices. The 24-PDIP package also facilitates through-hole construction and repair. For new compact products, a smaller package may be preferable, but this device is valuable when an existing 24-PDIP layout and its established pin functions are being retained.
تجویز کردہ
RS-232 Test Equipment
The ADM208EAN is suitable for portable or bench-top test equipment that needs multiple RS-232 ports for programming, fixture control, and diagnostic reporting. The four receivers can monitor handshake or status lines while the four drivers issue commands to connected equipment. Its documented ESD protection helps manage electrostatic exposure associated with external test leads, while the 200 kBPS rate is more than sufficient for many control and log-transfer protocols. The final design should include defined signal states during reset and verify cable length, grounding, and connector shielding under the intended operating environment.
تجویز کردہ
Security and Access-Control Systems
The ADM208EAN can support RS-232 connections between an access-control controller and readers, credential devices, alarm panels, or configuration equipment. Multiple driver and receiver channels provide flexibility for command, acknowledgment, and status wiring, while +5 V CMOS operation integrates readily with embedded controller logic. Because door and access systems may route cables through building infrastructure, ESD protection and controlled grounding are important. Use the manufacturer's application guidance for bypass and charge-pump capacitor placement, and validate the complete system for electromagnetic compatibility rather than relying only on the integrated IC rating.
تجویز کردہ
Communication Port Concentrators
The ADM208EAN is useful in port concentrators and protocol adapters that translate between CMOS logic and several RS-232 channels. Four receivers can monitor inputs from multiple downstream devices, and four drivers can route control traffic toward connected equipment. The 200 kBPS maximum rate suits supervisory, configuration, and status traffic common in legacy serial networks. Keep converter channels independent where isolation is not required, provide local bypassing at the +5 V supply pins, and check that all unused driver and receiver inputs are configured to valid levels according to the data sheet.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADM208EAN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
ڈیزائن نوٹس
Place the 0.1 µF charge-pump capacitors close to their designated pins and use the shortest practical ground return between the bypass and analog ground reference. Route RS-232 driver outputs and receiver inputs away from clocks, switching inductors, and high-speed digital nets. The 24-PDIP footprint provides generous through-hole spacing, but signal ordering on the board can still reduce noise coupling between adjacent channels.
Do not assume that all RS-232 transceivers are interchangeable with the ADM208EAN. A replacement must match the 24-PDIP footprint, channel directions, enable or shutdown behavior, supply voltage, charge-pump pins, logic thresholds, and electrical limits. Review every unused input and output during schematic review; unused receiver inputs require the biasing specified by the manufacturer, while unused driver outputs must be left in a defined state.
Treat the RS-232 connector as an electromagnetic boundary. Use the shortest practical ground conductor permitted by the interface design, maintain return-current continuity, and consider ferrite filtering or external protection when cables leave the enclosure. The device documentation addresses ESD, fast-transient burst, and low EMI emissions, but final system compliance depends on the enclosure, PCB return paths, cable construction, connector selection, and operating environment.
تعمیل کی معلومات
The manufacturer documentation references EMC Directive 89/336/EEC, IEC 1000-4-4 fast-transient-burst immunity, EN 55022 low EMI emissions, and ESD protection. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the verified product information.