Analog Devices

ADM208EAN - 4/4 RS-232 Transceiver | Analog Devices

MPN: ADM208EAN ✓ פעיל
+5 V Vdss 24-PDIP, 24-pin plastic DIP Package
כמות הזמנה מינימלית: 1 |

ADM208EAN סקירה

The Analog Devices ADM208EAN is a four-driver, four-receiver RS-232 transceiver designed for +5 V CMOS systems, with 0.1 µF charge-pump capacitors and data rates up to 200 kBPS. The device is packaged in a 24-pin plastic DIP (24-PDIP) package and is identified by the ADM208EAN order code.

An RS-232 transceiver is an interface IC that combines the electrical driver and receiver functions required to connect CMOS logic with RS-232 serial equipment. The ADM208EAN provides four transmit channels and four receive channels, allowing one device to support multiple serial links or a combination of data, control, and status signals. It belongs to the broader line-driver and receiver hierarchy within interface ICs.

The manufacturer describes the ADM208 family as a +5 V CMOS RS-232 transceiver with four drivers and four receivers. Its 200 kBPS data rate is suitable for industrial-control, communications, instrumentation, and legacy peripheral interfaces where RS-232 remains required. The 0.1 µF charge-pump capacitor specification supports a compact implementation, while the integrated transceiver reduces the number of separate driver and receiver packages needed on the board.

EMI and EMC protection are important considerations for RS-232 equipment because external cables can introduce electrostatic discharge and conducted or radiated noise. The ADM208EAN documentation identifies ±15 kV ESD protection, including air-gap discharge, contact discharge, and human-body-model protection. The documentation also references fast-transient-burst immunity and low EMI emissions under EN 55022.

The ADM208EAN is suitable for equipment that needs several bidirectional or unidirectional RS-232 connections near a system edge. Industrial controllers, test equipment, data-acquisition systems, and legacy computer interfaces can use the four drivers and four receivers to reduce component count while keeping the RS-232 electrical interface standardized. The CMOS supply arrangement also helps interface directly with modern digital logic families.

Designers should use the pin-description and typical-application information in the manufacturer data sheet when assigning signals, placing protection devices, and selecting bypass capacitors. RS-232 voltage levels, cable length, grounding, and connector exposure should be checked against the system EMC and ESD requirements. The ADM208EAN is a production device listed by Analog Devices with a product page and current manufacturer documentation.

This product data combines the manufacturer family description, distributor identification, RS-232 application context, and engineering guidance for EMI, ESD, PCB layout, and system integration.

חלופות תחליף ישיר עבור ADM208EAN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

ADM208EANZ

✅ Drop-In
📦 24-pin PDIP
Same 4/4 RS-232 configuration, 230 kbps data rate, +5 V supply, 24-pin PDIP package, and ±15 kV ESD rating; ordering-suffix qualification and environmental details require confirmation

📋 חלופה להתייחסות (לא בקטלוג)

MAX208ECNG+

✅ Drop-In
📦 24-pin DIP
Same 4/4 RS-232 topology, +5 V supply, 24-pin DIP package, integrated charge pump, and ±15 kV ESD rating; pin behavior and timing require schematic-level verification

📋 חלופה להתייחסות (לא בקטלוג)

ADM208EAN מפרטים

Product Type RS-232 transceiver
Driver and Receiver Configuration 4 drivers and 4 receivers
מתח אספקה +5 V
Logic Technology CMOS
Maximum Data Rate 200 kBPS
Charge-Pump Capacitor 0.1 µF
ESD Protection, Air-Gap Discharge ±15 kV
ESD Protection, Contact Discharge ±8 kV
ESD Protection, Human Body Model ±15 kV
EMC Directive 89/336/EEC
Fast Transient Burst Immunity IEC 1000-4-4
EMI Emissions Reference EN 55022
מארז 24-PDIP, 24-pin plastic DIP
סוג הרכבה Through-hole
מספר פינים 24 pins

מדריך תצורת פינים של ADM208EAN 24-pdip, 24-pin plastic dip

תצורת פינים עבור ADM208EAN (מארזת 24-pdip, 24-pin plastic dip). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 24-pdip, 24-pin plastic dip עבור ADM208EAN

אין נתוני פריסת פינים מפורטים עבור ADM208EAN.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADM208EAN מתאים עבור 6 יישוםs: Industrial RS-232 Control Interfaces, Data-Acquisition and Instrumentation, Legacy Computer and Peripheral Connectivity, RS-232 Test Equipment, Security and Access-Control Systems, Communication Port Concentrators.

🏭

Industrial RS-232 Control Interfaces

The ADM208EAN fits industrial controllers that require several RS-232 channels for equipment control, status reporting, and service communication. Its four drivers and four receivers consolidate up to eight directional line functions into one 24-PDIP device, while the 200 kBPS rate matches many legacy automation and instrumentation links. The documented ±15 kV air-gap ESD protection is especially relevant when controller ports connect to external cables. Designers should still provide suitable connector grounding, enclosure design, and cable-level protection, because the IC rating alone does not guarantee compliance in a finished system.

📊

Data-Acquisition and Instrumentation

The ADM208EAN is appropriate for laboratory and process-instrumentation equipment that must communicate with older RS-232 analyzers, fixtures, or computers. Four receivers can collect multiple status or measurement-channel signals, while four drivers support outbound commands and acknowledgements. Its +5 V CMOS operation and 0.1 µF charge-pump capacitors suit conventional embedded control hardware, and its 200 kBPS maximum rate is adequate for many measurement-control protocols. Keep the analog and digital grounds arranged to minimize return current through signal conductors, and validate grounding at the connector because RS-232 is unbalanced.

🖥️

Legacy Computer and Peripheral Connectivity

The ADM208EAN can preserve compatibility with legacy RS-232 ports in industrial computers, service consoles, adapters, and peripheral-control boards. Its four-channel transmitter and receiver arrangement allows one interface IC to serve several unidirectional control signals or multiple bidirectional ports, reducing board area compared with separate single-channel devices. The 24-PDIP package also facilitates through-hole construction and repair. For new compact products, a smaller package may be preferable, but this device is valuable when an existing 24-PDIP layout and its established pin functions are being retained.

🔧

RS-232 Test Equipment

The ADM208EAN is suitable for portable or bench-top test equipment that needs multiple RS-232 ports for programming, fixture control, and diagnostic reporting. The four receivers can monitor handshake or status lines while the four drivers issue commands to connected equipment. Its documented ESD protection helps manage electrostatic exposure associated with external test leads, while the 200 kBPS rate is more than sufficient for many control and log-transfer protocols. The final design should include defined signal states during reset and verify cable length, grounding, and connector shielding under the intended operating environment.

🔐

Security and Access-Control Systems

The ADM208EAN can support RS-232 connections between an access-control controller and readers, credential devices, alarm panels, or configuration equipment. Multiple driver and receiver channels provide flexibility for command, acknowledgment, and status wiring, while +5 V CMOS operation integrates readily with embedded controller logic. Because door and access systems may route cables through building infrastructure, ESD protection and controlled grounding are important. Use the manufacturer's application guidance for bypass and charge-pump capacitor placement, and validate the complete system for electromagnetic compatibility rather than relying only on the integrated IC rating.

🌐

Communication Port Concentrators

The ADM208EAN is useful in port concentrators and protocol adapters that translate between CMOS logic and several RS-232 channels. Four receivers can monitor inputs from multiple downstream devices, and four drivers can route control traffic toward connected equipment. The 200 kBPS maximum rate suits supervisory, configuration, and status traffic common in legacy serial networks. Keep converter channels independent where isolation is not required, provide local bypassing at the +5 V supply pins, and check that all unused driver and receiver inputs are configured to valid levels according to the data sheet.

What is the ADM208EAN?
The ADM208EAN is an Analog Devices four-driver, four-receiver RS-232 transceiver for +5 V CMOS systems. According to the manufacturer product page, it operates at up to 200 kBPS and uses 0.1 µF charge-pump capacitors. The ADM208EAN order code identifies the 24-PDIP package, making it suitable for legacy RS-232 ports, industrial controllers, test equipment, and data-acquisition systems that require multiple serial channels.
How many RS-232 drivers and receivers does ADM208EAN have?
The ADM208EAN contains four RS-232 drivers and four RS-232 receivers. The manufacturer describes the ADM208 family as a 4/4 transceiver, allowing a single device to implement several unidirectional or bidirectional serial interfaces. Its maximum operating data rate is 200 kBPS, so it is intended for RS-232 equipment operating within that established legacy serial-interface range.
What supply voltage does ADM208EAN use?
The ADM208EAN operates from a +5 V CMOS supply. The manufacturer identifies it as a +5 V CMOS RS-232 transceiver and specifies 0.1 µF charge-pump capacitors. Because the data sheet describes the device as CMOS-based, system-level logic compatibility and supply sequencing should be checked against the electrical-characteristics and absolute-maximum-rating tables in the manufacturer documentation.
What is the maximum data rate of ADM208EAN?
The ADM208EAN supports a maximum data rate of 200 kBPS. This rate comes from the Analog Devices ADM208 family description. It is suitable for traditional RS-232 links used in industrial control, instrumentation, legacy computer peripherals, and test systems. Cable length and signal loading can still reduce practical reliability, so the complete interface must be evaluated rather than relying on data rate alone.
Where can I download the ADM208EAN datasheet PDF?
The official Analog Devices ADM208 product page is the preferred source for the ADM208 family data sheet and downloadable documentation. The page identifies the current data sheet as Revision D and provides the product selection table, overview, and documentation links. Use the manufacturer PDF for pin assignments, electrical limits, ESD ratings, charge-pump connections, and typical application circuits.
Where can I find the ADM208EAN pinout?
The ADM208EAN pin assignments are documented in the Analog Devices ADM208 family data sheet, not in the distributor listing snippets. Use the pin-description table to map the 24-PDIP leads, power pins, driver outputs, receiver inputs, charge-pump nodes, and enable or shutdown functions. The public product page is available at https://www.analog.com/en/products/adm208.html for access to the current documentation.
What ESD protection does ADM208EAN provide?
The ADM208EAN documentation identifies ±15 kV air-gap discharge, ±8 kV contact discharge, and ±15 kV human-body-model ESD protection. These ratings indicate the device-level protection covered by the family documentation. They do not remove the need for normal connector grounding and cable design, and the final system should still be checked for external surge, ESD, and conducted-noise requirements.
Is ADM208EAN suitable for industrial RS-232 equipment?
The ADM208EAN is suitable for many industrial RS-232 interfaces because it combines four drivers, four receivers, a 200 kBPS data rate, and documented ESD protection. Its EMI features include low-emissions reference to EN 55022 and fast-transient-burst immunity referenced to IEC 1000-4-4. Final compliance depends on the complete product enclosure, cable, grounding, filtering, and system test configuration.
Where can I buy ADM208EAN online?
The ADM208EAN can be requested through the Request a Quote form on this product page. The manufacturer lists the ADM208 family in production, and distributor listings identify the exact ADM208EAN order code. The Request a Quote workflow allows the required quantity, delivery target, and sourcing questions to be submitted without relying on changing marketplace prices or stock messages.
What is the price of ADM208EAN?
Current ADM208EAN commercial terms are handled through the Request a Quote form on this page. The Analog Devices family page displays a starting list price for the broader product family, but the verified listing information does not provide a complete quantity-break table for the exact ADM208EAN suffix. A quote therefore avoids presenting an imprecise family-level price as an exact-order price.
What is the lead time for ADM208EAN?
The current lead time should be requested through the Request a Quote form on this page. Analog Devices identifies the ADM208 family as production, but a current exact-MPN lead-time and minimum-order quantity are not stated in the verified product information. Include the required order quantity, target ship date, and production schedule when submitting the request so the supply plan can be confirmed.
Is ADM208EAN in stock?
Stock availability changes with order quantity and supplier conditions, so the Request a Quote form on this page is the appropriate route for a current availability confirmation. Some distributor listings display stock indicators, while the manufacturer product page identifies the ADM208 family as production. Ask the supplier to confirm exact suffix, quantity, package form, and delivery date in the quotation.
What is the best drop-in replacement for ADM208EAN?
The best drop-in replacement must use the same 24-PDIP footprint and preserve the ADM208EAN electrical function: +5 V operation, four drivers, four receivers, 200 kBPS operation, and compatible pin functions. No defensible drop-in alternative with those requirements was identified in the substitute cross-reference results. Compare the manufacturer pin table and charge-pump connections before treating any candidate as a direct replacement.
Can another RS-232 transceiver replace ADM208EAN?
Another RS-232 transceiver can replace ADM208EAN only if its package, pinout, supply requirements, and key electrical ratings are fully compatible. A four-channel RS-232 device with a different package or enable arrangement is not a drop-in replacement and may require PCB changes. Use the ADM208EAN data sheet and the replacement data sheet side by side, including driver levels, receiver thresholds, charge-pump pins, and shutdown behavior.
ADM208EAN versus a generic RS-232 transceiver: which is better?
The ADM208EAN is preferable when a design specifically requires a four-driver, four-receiver +5 V CMOS RS-232 transceiver in a 24-PDIP package with documented ESD and EMC features. A generic RS-232 transceiver may be preferable when it offers a lower-cost, smaller, or modern package, but that choice can require a PCB redesign. The decisive factors are footprint, pin compatibility, channel count, speed, protection, and lifecycle.
When should I choose ADM208EAN instead of a smaller RS-232 transceiver?
Choose the ADM208EAN when the existing board requires a 24-PDIP RS-232 device with four drivers and four receivers, +5 V CMOS operation, and up to 200 kBPS signaling. Its documented ESD protection and EMC-focused design also suit exposed legacy serial ports. A smaller transceiver may be better in a new compact design, but it should be treated as a redesign unless its pinout and footprint are proven compatible.
What are the key specifications of ADM208EAN that engineers should know?
The ADM208EAN is a +5 V CMOS RS-232 transceiver with four drivers, four receivers, a maximum data rate of 200 kBPS, and 0.1 µF charge-pump capacitors. It is supplied in a 24-PDIP package. The documentation also identifies ±15 kV air-gap and human-body-model ESD protection, ±8 kV contact protection, EN 55022 low-emissions features, and IEC 1000-4-4 fast-transient-burst immunity.
What can replace ADM208EAN?
ADM208EAN can be replaced only by a part that is pin-to-pin and footprint compatible with the 24-PDIP device while preserving its four-driver, four-receiver, +5 V, 200 kBPS, and charge-pump behavior. No specific drop-in candidate was confirmed by the substitute cross-reference results, so a generic “RS-232 equivalent” should not be assumed interchangeable. Validate the candidate against the manufacturer pin table and electrical characteristics before purchasing.
Is ADM208EAN the same as an RS-232 interface IC?
The ADM208EAN is an RS-232 interface IC, but not every RS-232 interface IC is interchangeable with it. This specific device combines four drivers and four receivers in a 24-PDIP package and operates from +5 V at up to 200 kBPS. Equivalent function alone is insufficient for replacement because package pins, shutdown behavior, charge-pump connections, logic levels, and protection ratings must also match.

נתוני עזר הנדסיים עבור ADM208EAN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ADM208EAN when maintaining or redesigning around an existing 24-PDIP board that requires four RS-232 drivers, four receivers, +5 V CMOS operation, and communication rates up to 200 kBPS. It is especially practical for legacy industrial, test, and data-acquisition equipment where external cables make the documented ESD and EMC features important. A smaller or surface-mount RS-232 transceiver may be a better choice for a new compact design, but it should be treated as a redesign unless the footprint and pins are proven identical. Likewise, another four-channel RS-232 device is not automatically a drop-in replacement because enable, shutdown, charge-pump, and logic-level arrangements can differ. For an existing ADM208EAN layout, verify the exact suffix, package, pin table, supply requirements, and protection ratings. For new products, compare channel count, speed, package size, lifecycle, ESD rating, and total board area rather than selecting solely by the phrase “RS-232 transceiver.”

הערות תכנון

Place the 0.1 µF charge-pump capacitors close to their designated pins and use the shortest practical ground return between the bypass and analog ground reference. Route RS-232 driver outputs and receiver inputs away from clocks, switching inductors, and high-speed digital nets. The 24-PDIP footprint provides generous through-hole spacing, but signal ordering on the board can still reduce noise coupling between adjacent channels.

Do not assume that all RS-232 transceivers are interchangeable with the ADM208EAN. A replacement must match the 24-PDIP footprint, channel directions, enable or shutdown behavior, supply voltage, charge-pump pins, logic thresholds, and electrical limits. Review every unused input and output during schematic review; unused receiver inputs require the biasing specified by the manufacturer, while unused driver outputs must be left in a defined state.

Treat the RS-232 connector as an electromagnetic boundary. Use the shortest practical ground conductor permitted by the interface design, maintain return-current continuity, and consider ferrite filtering or external protection when cables leave the enclosure. The device documentation addresses ESD, fast-transient burst, and low EMI emissions, but final system compliance depends on the enclosure, PCB return paths, cable construction, connector selection, and operating environment.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer documentation references EMC Directive 89/336/EEC, IEC 1000-4-4 fast-transient-burst immunity, EN 55022 low EMI emissions, and ESD protection. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the verified product information.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ADM208EAN datasheet ADM208EAN datasheet pdf ADM208EAN pinout ADM208EAN specifications ADM208EAN 24-PDIP Analog Devices ADM208EAN ADM208EAN RS-232 transceiver ADM208EAN equivalent ADM208EAN replacement ADM208EAN price ADM208EAN stock ADM208EAN ESD protection

רכיבים ומונחים קשורים

Analog Devices ADM208EAN ADM208 RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC CMOS +5 V supply 200 kBPS data rate 0.1 µF charge-pump capacitor 24-PDIP plastic DIP through-hole package ESD protection air-gap discharge contact discharge human body model EMI emissions EMC Directive 89/336/EEC IEC 1000-4-4 EN 55022 industrial control data acquisition
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר