Analog Devices

ADM3202ARWZ - Dual 3.3V RS-232 Transceiver | Analog Devices

MPN: ADM3202ARWZ ✓ فعال
+3.3 V Vdss 16-pin SOIC wide-body Package
MOQ: 1 |

ADM3202ARWZ جائزہ

Analog Devices ADM3202ARWZ is a dual-channel RS-232 line driver and receiver in a 16-pin SOIC wide-body package. It operates from a single +3.3 V supply, supports data rates up to 230 kbps, and uses four external 0.1 µF charge-pump capacitors. The device is designed for EIA-232E and CCITT V.28 interface systems, including portable instruments, industrial equipment, and embedded serial links.

An RS-232 transceiver combines a line driver and line receiver to convert between digital logic levels and RS-232 voltage levels. The ADM3202ARWZ is a low-power interface IC that places two transmit channels and two receive channels in one package. Its single-supply operation and integrated charge-pump voltage conversion simplify systems that cannot use the traditional ±5 V or ±12 V RS-232 supply arrangement.

Key features include two drivers, two receivers, operation from a single 3.3 V power supply, and data rates up to 230 kbps. The manufacturer describes the ADM3202, ADM3222, and ADM1385 families as conforming to EIA-232E and CCITT V.28 specifications. Four external 0.1 µF capacitors support the internal voltage doubler and inverter, allowing the interface to generate the required RS-232 levels from one low-voltage rail.

The ADM3202ARWZ is suitable for portable and battery-powered instruments because its low-power operation eliminates the need for a separate negative supply. Typical interface targets include serial adapters, test and measurement equipment, industrial controllers, and embedded systems that communicate with RS-232 peripherals over longer cable runs.

Designers should place the four charge-pump capacitors close to their associated pins and follow the manufacturer’s recommended layout and decoupling guidance. The external capacitor network is part of the operating circuit, so incorrect placement or unsuitable capacitor type can affect charge-pump performance and signal integrity.

This product page combines manufacturer specifications, package information, cross-reference findings, and practical interface-circuit guidance to support faster component selection, PCB layout planning, and drop-in replacement evaluation.

کے لیے ڈراپ اِن متبادل ADM3202ARWZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADM3202ARWZ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type, Data Rate, Interface Standard, Number of Drivers.

Analog Devices
Package: 16-pin SOIC
موازنہ کریں ADM3202ARWZ →
Texas Instruments
Package: 16-SSOP (0.209 inch, 5.30mm width)
Product Type: RS-232 line driver and receiver transceiver
Data Rate: 250kbps
موازنہ کریں ADM3202ARWZ →

ADM3202ARW

✅ ڈراپ-اِن
Analog Devices
📦 16-SOIC (0.295", 7.50mm Width)
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3 V to 5.5 V · 3.3 V · 230 kbps · EIA-232E · CCITT V.28

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MAX3221EIDBR

✅ ڈراپ-اِن
Texas Instruments
📦 16-SOIC
RS-232 line driver and receiver transceiver · 1 · 1 · 250kbps · 3V to 5.5V · TIA/EIA-232-F · IEC 61000-4-2 · ±15kV

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADM3202ARWZ تفصیلات

Product Type Dual RS-232 line driver and receiver
Number of Drivers 2 channels
Number of Receivers 2 channels
سپلائی وولٹیج +3.3 V
ڈیٹا ریٹ Up to 230 kbps
Interface Standard EIA-232E and CCITT V.28
Charge Pump Capacitors 4 external 0.1 µF capacitors
Duplex Operation Full duplex
پیکیج 16-pin SOIC wide-body
Package Width 7.50 mm
ماؤنٹنگ ٹائپ Surface mount
Transceiver Configuration 2/2 transceiver
Supply Architecture Single-supply charge-pump voltage conversion
ESD Protection IEC 1000-4-2 protection referenced by manufacturer family documentation
RoHS اسٹیٹس unknown
REACH Status unknown
Automotive Qualification not_applicable
لائف سائیکل کی حالت Active

ADM3202ARWZ 7.50 mm پن کنفیگریشن گائیڈ

ADM3202ARWZ (7.50 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ADM3202ARWZ کے لیے 7.50 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADM3202ARWZ.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ADM3202ARWZ کے لیے موزوں ہے 6 ایپلیکیشنs: Portable RS-232 Test Instruments, Industrial Serial Controllers, Serial Port Adapters, Embedded Equipment Interfaces, Battery-Powered Portable Devices, Data Acquisition and Control Systems.

🔧

Portable RS-232 Test Instruments

The ADM3202ARWZ fits portable instruments that need a compact, low-power RS-232 interface. Its single +3.3 V supply removes the need for a separate negative rail, while the two transmitters and two receivers support full-duplex communication. The four external 0.1 µF charge-pump capacitors form a required part of the interface network, so their placement and values should follow the Analog Devices application guidance.

🏭

Industrial Serial Controllers

The ADM3202ARWZ is suitable for industrial controllers communicating with RS-232 equipment over cable connections. Two driver channels and two receiver channels provide full-duplex operation in a single 16-SOIC package. The 230 kbps maximum data rate covers many legacy control and configuration protocols, while the single-supply architecture simplifies system power distribution.

🔌

Serial Port Adapters

A compact RS-232 adapter can use the ADM3202ARWZ to bridge modern logic-level circuitry with conventional RS-232 equipment. The device converts transmit and receive signals in one package and operates from a single 3.3 V rail. Designers should preserve the specified charge-pump capacitor network and use the manufacturer pinout when assigning the 16-SOIC footprint.

🖥️

Embedded Equipment Interfaces

The ADM3202ARWZ can provide legacy RS-232 connectivity in embedded equipment that uses 3.3 V logic and needs bidirectional serial communication. Its 2/2 architecture allows two data paths without requiring separate line-driver and receiver packages. The interface is appropriate where the system must meet EIA-232E or CCITT V.28 signaling requirements without a dual-polarity supply.

🔋

Battery-Powered Portable Devices

The single-supply ADM3202ARWZ is well suited to battery-powered equipment where reducing power-supply complexity is valuable. Analog Devices describes low power consumption as a family benefit and highlights portable-instrument use. The external 0.1 µF charge-pump capacitors remain mandatory, and the receiver and transmitter channels should be configured according to the manufacturer’s recommended application circuit.

📟

Data Acquisition and Control Systems

The ADM3202ARWZ can serve as the RS-232 front end for data-acquisition and laboratory-control systems. Its 230 kbps data-rate capability and two-channel full-duplex configuration are appropriate for many legacy instrument protocols. Use the exact 16-SOIC pin assignment and the required 0.1 µF capacitor values from the Analog Devices datasheet when laying out the interface section.

What is the operating voltage of ADM3202ARWZ?
The ADM3202ARWZ operates from a single +3.3 V supply. According to the Analog Devices ADM3202 family datasheet, the device uses four external 0.1 µF charge-pump capacitors to support its internal voltage doubler and inverter, allowing RS-232 operation without a separate negative supply rail.
What is the maximum data rate of ADM3202ARWZ?
The ADM3202ARWZ supports data rates up to 230 kbps. Analog Devices identifies the ADM3202, ADM3222, and ADM1385 as high-speed, two-channel RS-232 and V.28 interface devices. This rate is suitable for common serial-control, instrumentation, and legacy peripheral interfaces.
How many RS-232 channels does ADM3202ARWZ provide?
The ADM3202ARWZ provides two line drivers and two line receivers, forming a 2/2 full-duplex RS-232 transceiver. The manufacturer describes the family as a two-channel interface device with a single 3.3 V supply and EIA-232E and CCITT V.28 compatibility.
What capacitors are required for ADM3202ARWZ?
The ADM3202ARWZ requires four external 0.1 µF charge-pump capacitors. Analog Devices specifies these capacitors for the internal voltage doubler and inverter. Their placement and electrical characteristics should follow the manufacturer’s datasheet layout guidance to preserve charge-pump performance.
Is ADM3202ARWZ a drop-in replacement for ADM3202ARW?
ADM3202ARW is the closest documented same-package option for the ADM3202ARWZ. The comparison identifies the ADM3202ARW as the same ADM3202 family in a 16-SOIC configuration, while the ADM3202ARWZ is also specified in a 16-SOIC wide-body package. Verify the exact pinout, capacitor network, and operating requirements before substitution.
What is the difference between ADM3202ARWZ and ADM3222ARW?
The ADM3202ARWZ is a two-channel RS-232 transceiver intended for low-power, single-supply operation, while the ADM3222 family adds a shutdown facility according to Analog Devices. The ADM3222ARW comparison also indicates a different package configuration. Use the manufacturer pinout and ordering information to confirm whether a specific board requires the shutdown function.
What is the best drop-in replacement for ADM3202ARWZ?
The best documented replacement candidate is the ADM3202ARW, because it is the same Analog Devices ADM3202 family and is offered in a 16-SOIC configuration. The ADM3202ARWZ is identified as a 16-SOIC wide-body part with a 7.50 mm width. Confirm pin compatibility and the required external 0.1 µF capacitors before approving a substitution.
Can MAX3221EIDBR replace ADM3202ARWZ?
MAX3221EIDBR is a candidate for review because it is a RS-232 interface transceiver in the 16-SOIC format, but it is not a verified cross-brand equivalence for the ADM3202ARWZ in the available cross-reference material. Review the MAX3221EIDBR data sheet for pinout, charge-pump capacitor values, supply requirements, and logic-level compatibility before using it as a drop-in replacement.
Where can I download the ADM3202ARWZ datasheet PDF?
The official Analog Devices family datasheet is available at https://www.analog.com/media/en/technical-documentation/data-sheets/ADM3202_3222_1385.pdf. It covers the ADM3202, ADM3222, and ADM1385 devices and is the preferred document for pin assignments, electrical characteristics, charge-pump capacitors, and application guidance.
Where can I find the ADM3202ARWZ pinout?
Use the pin-description table and package drawing in the Analog Devices ADM3202 family datasheet. The verified product information identifies the ADM3202ARWZ as a 16-SOIC wide-body device, but it does not provide a complete numbered pin table. Do not infer individual pin numbers from a distributor image without checking the manufacturer document.
Is ADM3202ARWZ suitable for portable instruments?
Yes. The ADM3202 family is specifically described as suitable for battery-powered portable instruments because it operates from a single 3.3 V supply and offers low power consumption. The ADM3202ARWZ is the two-channel version without the shutdown feature listed for the ADM3222 and ADM1385 family members.
What is the power-consumption advantage of ADM3202ARWZ?
The ADM3202ARWZ avoids the traditional dual-supply RS-232 arrangement by operating from a single +3.3 V supply and using internal charge-pump conversion. Analog Devices highlights low power consumption as a family feature. Exact quiescent and load-current values should be taken from the manufacturer electrical-characteristics table for the selected operating condition.
What does the ADM3202ARWZ do in an RS-232 system?
The ADM3202ARWZ converts digital logic signals into RS-232 line-driver outputs and converts received RS-232 signals into logic-compatible receiver outputs. With two transmitters and two receivers, it supports full-duplex communication through a single 3.3 V-powered interface circuit.
Does ADM3202ARWZ require a negative voltage supply?
No separate negative supply is required for normal operation. The Analog Devices datasheet describes four external 0.1 µF charge-pump capacitors used by the voltage doubler and inverter, enabling the device to operate from a single +3.3 V supply. The charge-pump network remains a required part of the application circuit.
How do I choose between ADM3202ARWZ and a MAX3221EIDBR?
Choose the ADM3202ARWZ when the design specifically calls for the Analog Devices ADM3202 family, 2/2 RS-232 channels, a single 3.3 V supply, and the documented external 0.1 µF charge-pump network. Consider MAX3221EIDBR only after checking its manufacturer data sheet for exact pinout, capacitor values, shutdown behavior, and supply compatibility.
What is the lifecycle status of ADM3202ARWZ?
The ADM3202ARWZ is listed as an active Analog Devices product on the manufacturer product page. The official ADM3202 product information and family datasheet remain available, while distributor listings identify the exact 16-SOIC variant as a current catalog component.

کے لیے انجینئرنگ ریفرنس ڈیٹا ADM3202ARWZ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ADM3202ARWZ when the design requires a two-channel, full-duplex RS-232 interface powered from a single +3.3 V rail and uses the Analog Devices ADM3202 family pinout and charge-pump network. It is a practical option for portable instruments, industrial controllers, data-acquisition equipment, and legacy serial adapters. The ADM3202ARW is the closest same-family option and should be selected when its exact electrical and ordering details match the board. MAX3221EIDBR may suit a comparable 16-SOIC RS-232 design, but it requires separate verification of pinout, capacitor values, shutdown behavior, and supply compatibility. Do not choose a TSSOP or narrower package solely because it provides the same RS-232 function; the footprint and pin assignment must match. For production substitutions, verify the complete manufacturer datasheet and conduct signal-integrity and power-supply checks.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ADM3202ARW MAX3221EIDBR
Package 16-SOIC (0.295", 7.50mm Width) 16-SOIC configuration 16-SOIC
Brand Analog Devices Analog Devices Maxim Integrated

اہم امتیازی خصوصیات

  • Single-supply RS-232 interface (بمقابلہMAX3221EIDBR)
  • Two-channel full-duplex architecture (بمقابلہADM3202ARW)
  • Documented charge-pump implementation (بمقابلہMAX3221EIDBR)
  • Family compatibility for RS-232 and V.28 (بمقابلہMAX3221EIDBR)

ڈیزائن نوٹس

Place all four 0.1 µF charge-pump capacitors close to the ADM3202ARWZ pins and follow the Analog Devices recommended layout. Keep the RS-232 driver outputs away from sensitive receiver inputs and logic traces where practical. The verified product information confirms the required capacitor count and value, but the complete pin assignment should be taken directly from the manufacturer datasheet.

Decouple the +3.3 V supply locally and route return current through a compact ground path. Because the ADM3202ARWZ generates RS-232 levels through charge-pump capacitors, incorrect capacitor placement or inadequate supply bypassing can degrade signal quality. Verify the voltage and capacitance values against the manufacturer’s recommended application circuit before fabrication.

Do not treat the ADM3202ARWZ as a conventional ±5 V or ±12 V RS-232 device. It is a single-supply 3.3 V part with an external charge-pump network. Also do not assume that every 16-SOIC RS-232 transceiver is interchangeable: confirm the numbered pinout, capacitor values, enable or shutdown behavior, and logic thresholds in the replacement part’s datasheet.

For cable-connected RS-232 links, keep the transceiver-side routing compact and connect the interface ground with the equipment ground strategy required by the system. Avoid long parallel runs between transmitter and receiver sections, and observe any cable-length and slew-rate requirements specified for the communication protocol. The ADM3202ARWZ supports rates up to 230 kbps according to the manufacturer product page.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The family datasheet identifies JEDEC MS-013-AA package compliance, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the exact ADM3202ARWZ ordering code is not stated in the available manufacturer information.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ADM3202ARWZ datasheet ADM3202ARWZ pinout ADM3202ARWZ datasheet pdf ADM3202ARWZ equivalent ADM3202ARWZ replacement ADM3202ARWZ vs ADM3202ARW ADM3202ARWZ vs MAX3221EIDBR ADM3202ARWZ 3.3V RS-232 ADM3202ARWZ 16-SOIC ADM3202ARWZ application circuit ADM3202ARWZ price ADM3202ARWZ stock Analog Devices ADM3202ARWZ ADM3202ARWZ footprint ADM3202ARWZ charge pump capacitors

متعلقہ اجزاء اور اصطلاحات

Analog Devices ADM3202ARWZ ADM3202ARW MAX3221EIDBR RS-232 transceiver line driver line receiver interface IC EIA-232E CCITT V.28 single-supply operation 3.3 V power supply charge-pump capacitors 0.1 µF capacitor 16-SOIC SOIC wide-body surface mount full duplex 230 kbps portable instruments industrial control data acquisition RS-232 voltage levels JEDEC MS-013-AA ESD protection
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں