ADM3202ARWZ - Dual 3.3V RS-232 Transceiver | Analog Devices
MPN: ADM3202ARWZ ✓ نشطADM3202ARWZ نظرة عامة
An RS-232 transceiver combines a line driver and line receiver to convert between digital logic levels and RS-232 voltage levels. The ADM3202ARWZ is a low-power interface IC that places two transmit channels and two receive channels in one package. Its single-supply operation and integrated charge-pump voltage conversion simplify systems that cannot use the traditional ±5 V or ±12 V RS-232 supply arrangement.
Key features include two drivers, two receivers, operation from a single 3.3 V power supply, and data rates up to 230 kbps. The manufacturer describes the ADM3202, ADM3222, and ADM1385 families as conforming to EIA-232E and CCITT V.28 specifications. Four external 0.1 µF capacitors support the internal voltage doubler and inverter, allowing the interface to generate the required RS-232 levels from one low-voltage rail.
The ADM3202ARWZ is suitable for portable and battery-powered instruments because its low-power operation eliminates the need for a separate negative supply. Typical interface targets include serial adapters, test and measurement equipment, industrial controllers, and embedded systems that communicate with RS-232 peripherals over longer cable runs.
Designers should place the four charge-pump capacitors close to their associated pins and follow the manufacturer’s recommended layout and decoupling guidance. The external capacitor network is part of the operating circuit, so incorrect placement or unsuitable capacitor type can affect charge-pump performance and signal integrity.
This product page combines manufacturer specifications, package information, cross-reference findings, and practical interface-circuit guidance to support faster component selection, PCB layout planning, and drop-in replacement evaluation.
بدائل مباشرة لـ ADM3202ARWZ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ADM3202ARWZ (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type, Data Rate, Interface Standard, Number of Drivers.
ADM3202ARW
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX3221EIDBR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ADM3202ARWZ المواصفات
| Product Type | Dual RS-232 line driver and receiver |
| Number of Drivers | 2 channels |
| Number of Receivers | 2 channels |
| جهد التغذية | +3.3 V |
| معدل البيانات | Up to 230 kbps |
| Interface Standard | EIA-232E and CCITT V.28 |
| Charge Pump Capacitors | 4 external 0.1 µF capacitors |
| Duplex Operation | Full duplex |
| العلبة | 16-pin SOIC wide-body |
| Package Width | 7.50 mm |
| نوع التركيب | Surface mount |
| Transceiver Configuration | 2/2 transceiver |
| Supply Architecture | Single-supply charge-pump voltage conversion |
| ESD Protection | IEC 1000-4-2 protection referenced by manufacturer family documentation |
| حالة RoHS | unknown |
| REACH Status | unknown |
| Automotive Qualification | not_applicable |
| حالة دورة الحياة | Active |
دليل تكوين أطراف ADM3202ARWZ 7.50 mm
تكوين الأطراف لـ ADM3202ARWZ (حزمة 7.50 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADM3202ARWZ.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ADM3202ARWZ مناسب لـ 6 التطبيقs: Portable RS-232 Test Instruments, Industrial Serial Controllers, Serial Port Adapters, Embedded Equipment Interfaces, Battery-Powered Portable Devices, Data Acquisition and Control Systems.
Portable RS-232 Test Instruments
The ADM3202ARWZ fits portable instruments that need a compact, low-power RS-232 interface. Its single +3.3 V supply removes the need for a separate negative rail, while the two transmitters and two receivers support full-duplex communication. The four external 0.1 µF charge-pump capacitors form a required part of the interface network, so their placement and values should follow the Analog Devices application guidance.
موصى به
Industrial Serial Controllers
The ADM3202ARWZ is suitable for industrial controllers communicating with RS-232 equipment over cable connections. Two driver channels and two receiver channels provide full-duplex operation in a single 16-SOIC package. The 230 kbps maximum data rate covers many legacy control and configuration protocols, while the single-supply architecture simplifies system power distribution.
موصى به
Serial Port Adapters
A compact RS-232 adapter can use the ADM3202ARWZ to bridge modern logic-level circuitry with conventional RS-232 equipment. The device converts transmit and receive signals in one package and operates from a single 3.3 V rail. Designers should preserve the specified charge-pump capacitor network and use the manufacturer pinout when assigning the 16-SOIC footprint.
موصى به
Embedded Equipment Interfaces
The ADM3202ARWZ can provide legacy RS-232 connectivity in embedded equipment that uses 3.3 V logic and needs bidirectional serial communication. Its 2/2 architecture allows two data paths without requiring separate line-driver and receiver packages. The interface is appropriate where the system must meet EIA-232E or CCITT V.28 signaling requirements without a dual-polarity supply.
موصى به
Battery-Powered Portable Devices
The single-supply ADM3202ARWZ is well suited to battery-powered equipment where reducing power-supply complexity is valuable. Analog Devices describes low power consumption as a family benefit and highlights portable-instrument use. The external 0.1 µF charge-pump capacitors remain mandatory, and the receiver and transmitter channels should be configured according to the manufacturer’s recommended application circuit.
موصى به
Data Acquisition and Control Systems
The ADM3202ARWZ can serve as the RS-232 front end for data-acquisition and laboratory-control systems. Its 230 kbps data-rate capability and two-channel full-duplex configuration are appropriate for many legacy instrument protocols. Use the exact 16-SOIC pin assignment and the required 0.1 µF capacitor values from the Analog Devices datasheet when laying out the interface section.
موصى به
بيانات مرجعية هندسية لـ ADM3202ARWZ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ADM3202ARW | MAX3221EIDBR |
|---|---|---|---|
| Package | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC configuration | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Maxim Integrated |
أبرز الفروقات
- Single-supply RS-232 interface (مقابلMAX3221EIDBR)
- Two-channel full-duplex architecture (مقابلADM3202ARW)
- Documented charge-pump implementation (مقابلMAX3221EIDBR)
- Family compatibility for RS-232 and V.28 (مقابلMAX3221EIDBR)
ملاحظات التصميم
Place all four 0.1 µF charge-pump capacitors close to the ADM3202ARWZ pins and follow the Analog Devices recommended layout. Keep the RS-232 driver outputs away from sensitive receiver inputs and logic traces where practical. The verified product information confirms the required capacitor count and value, but the complete pin assignment should be taken directly from the manufacturer datasheet.
Decouple the +3.3 V supply locally and route return current through a compact ground path. Because the ADM3202ARWZ generates RS-232 levels through charge-pump capacitors, incorrect capacitor placement or inadequate supply bypassing can degrade signal quality. Verify the voltage and capacitance values against the manufacturer’s recommended application circuit before fabrication.
Do not treat the ADM3202ARWZ as a conventional ±5 V or ±12 V RS-232 device. It is a single-supply 3.3 V part with an external charge-pump network. Also do not assume that every 16-SOIC RS-232 transceiver is interchangeable: confirm the numbered pinout, capacitor values, enable or shutdown behavior, and logic thresholds in the replacement part’s datasheet.
For cable-connected RS-232 links, keep the transceiver-side routing compact and connect the interface ground with the equipment ground strategy required by the system. Avoid long parallel runs between transmitter and receiver sections, and observe any cable-length and slew-rate requirements specified for the communication protocol. The ADM3202ARWZ supports rates up to 230 kbps according to the manufacturer product page.
معلومات الامتثال
The family datasheet identifies JEDEC MS-013-AA package compliance, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the exact ADM3202ARWZ ordering code is not stated in the available manufacturer information.