Analog Devices

ADM3488ARZN - 250 kbps Full-Duplex RS-485 Transceiver | Analog Devices

MPN: ADM3488ARZN ✓ فعال
3.3 V Vdss RS-485 and RS-422 Rds(on) 8-pin SOIC Package
MOQ: 1 |

ADM3488ARZN جائزہ

The Analog Devices ADM3488ARZN is a 3.3 V, low-power differential line transceiver with a maximum data rate of 250 kbps, full-duplex RS-485/RS-422 operation, slew-rate-limited signaling, and an 8-pin SOIC package. It combines one differential driver and one differential receiver in a single package, making it suitable for bidirectional industrial communication links that require low power and controlled edge rates.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable transmission over longer cable runs. The differential signaling improves noise immunity by comparing the voltage between two conductors rather than referencing the signal to ground. In the system hierarchy, the ADM3488 belongs to interface ICs, line transceivers, physical-layer communication devices, and ultimately semiconductor components.

The ADM3488 family operates from a single 3.3 V supply, emphasizing low power consumption for industrial, instrumentation, and embedded systems. Its 250 kbps maximum signaling rate supports moderate-speed data rather than the multi-megabit rates used by high-speed RS-485 links. The slew-rate-limited driver reduces high-frequency harmonics and ringing on long cables, improving electromagnetic compatibility without requiring a higher data rate.

Analog Devices identifies the ADM3488 as a production full-duplex RS-485/RS-422 transceiver. The 8-SOIC format supports conventional surface-mount assembly and is smaller than many older leaded interface packages. Because the device supports full-duplex communication, the driver and receiver paths can operate simultaneously, allowing dedicated transmit and receive pairs on a bus design.

Typical uses include industrial automation equipment, motor controllers, test and measurement instruments, building automation interfaces, and embedded serial links. The controlled transition rate is especially useful where cable length, ringing, or emissions must be managed. Applications that need greater bus speed, galvanic isolation, automatic direction control, or integrated termination should be evaluated against devices designed for those specific functions.

PCB implementation should preserve the differential path from the transceiver to the connector and minimize stubs. Place the interface IC near the connector and route the differential pair as a tightly coupled pair over a continuous reference plane. Decoupling capacitance must be positioned close to the supply pins, while external protection components should be selected to handle the cable-side voltage and surge environment.

This product page combines device specifications, pin-compatible replacement guidance, application analysis, and practical PCB considerations. It helps engineers distinguish the ADM3488 from half-duplex transceivers, electrically similar but pin-incompatible interface ICs, and higher-speed or enhanced-protection alternatives before committing a board design.

کے لیے ڈراپ اِن متبادل ADM3488ARZN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADM3488ARZN (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type, Maximum Data Rate, Driver Count, Logic Compatibility.

Analog Devices
Package: 8-SOIC, 3.90 mm width
Product Type: Differential RS-485/RS-422 line transceiver
Maximum Data Rate: 10 Mbps
موازنہ کریں ADM3488ARZN →
Analog Devices
Package: 14-lead SOIC
Product Type: Full-duplex differential line transceiver
Maximum Data Rate: 10 Mbps
موازنہ کریں ADM3488ARZN →
Maxim Integrated
Package: 8-pin NSOIC
Product Type: RS-485/RS-422 transceiver
Maximum Data Rate: 12 Mbps
موازنہ کریں ADM3488ARZN →

ADM3488ARZ

✅ ڈراپ-اِن
📦 8-SOIC
Same 250 kbps full-duplex 3.3 V family rating and 8-SOIC package; ordering-code temperature and packaging details must be confirmed

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADM3490ARZ

✅ ڈراپ-اِن
Analog Devices
📦 8-SOIC
Differential RS-485/RS-422 line transceiver · 3.3 V · 10 Mbps · 1 · 1 · Interoperable with 5 V logic · EIA RS-422 and RS-485 compliant · 12 kΩ

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADM3491ARZ

✅ ڈراپ-اِن
Analog Devices
📦 8-SOIC
Full-duplex differential line transceiver · EIA RS-422 and EIA RS-485 · 3.3 V · 10 Mbps · 19 kΩ · 50 transceivers · 840 µA · 2 nA

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MAX3488EESA+

✅ ڈراپ-اِن
Maxim Integrated
📦 8-SOIC
RS-485/RS-422 transceiver · 3.3 V · 12 Mbps · ±15 kV · 1 · 1 · True differential RS-485/RS-422 · Slew-rate limited

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

SP3071EEN-L

✅ ڈراپ-اِن
📦 8-SOIC
Same 3.3 V differential RS-485/RS-422 transceiver class in 8-SOIC; driver, receiver, and protection ratings require comparison

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADM3488ARZN تفصیلات

Product Type RS-485/RS-422 differential line transceiver
سپلائی وولٹیج 3.3 V
Maximum Data Rate 250 kbps
Duplex Mode Full duplex
Supported Standards RS-485 and RS-422
Driver Transition Rate Slew-rate limited
Driver Count 1 differential driver
Receiver Count 1 differential receiver
پیکیج 8-pin SOIC
ماؤنٹنگ ٹائپ Surface mount
Production Status Production
RoHS اسٹیٹس Unknown
REACH Status Unknown

ADM3488ARZN 8-pin soic پن کنفیگریشن گائیڈ

ADM3488ARZN (8-pin soic پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ADM3488ARZN کے لیے 8-pin soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADM3488ARZN.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ADM3488ARZN کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Interfaces, Test and Measurement Instrumentation, Motor Controller Communication, Building Automation Networks, Embedded Equipment Gateways, Remote Sensor and Actuator Links.

🏭

Industrial Automation Interfaces

The ADM3488ARZN fits industrial automation equipment that needs a reliable, moderate-speed full-duplex serial link between a controller and remote field equipment. Its 3.3 V supply simplifies integration with low-voltage digital logic, while the 250 kbps data rate is suitable for command and status traffic that does not require high-speed Ethernet-class bandwidth. The full-duplex arrangement separates transmit and receive paths, avoiding shared-bus direction control inside the node. In an RS-422 point-to-point arrangement, it can also support bidirectional communication over separate differential pairs. The slew-rate-limited driver helps limit high-frequency cable ringing and electromagnetic emissions, but the layout must still use closely coupled differential routing, short connector stubs, and a continuous reference plane.

🔧

Test and Measurement Instrumentation

The ADM3488ARZN is appropriate for test and measurement instruments that exchange commands, calibration data, and status information with a host over a balanced serial link. A 250 kbps rate provides useful throughput for instrument-control protocols while remaining conservative for cables in laboratories, production cells, or equipment racks. The device's full-duplex operation allows continuous reception of measurements or acknowledgments while the instrument transmits configuration commands. Its 3.3 V operation is compatible with modern control boards and reduces the supply complexity compared with legacy 5 V interface designs. The controlled slew rate is valuable when the instrument must remain compatible with cables near other analog and digital equipment. A common ground reference and correctly implemented termination remain important even though the data path itself is differential.

⚡

Motor Controller Communication

The ADM3488ARZN can support command and status communication between a motor controller and a supervisory controller when the link operates below 250 kbps. Industrial motor systems often distribute a drive controller over several meters of shielded cable, making differential signaling preferable to single-ended logic. The ADM3488ARZN combines a differential transmitter and receiver in an 8-SOIC package and supports full-duplex operation, which simplifies designs that use separate command and feedback pairs. Its slew-rate-limited output reduces edge-related ringing on longer interconnects and helps control EMI around power converters and motor circuitry. Care is still required to separate the communication route from motor and switching-node currents, use appropriate surge protection at exposed connectors, and avoid excessive cable stubs.

🧩

Building Automation Networks

The ADM3488ARZN is suitable for low-speed building automation controllers, equipment gateways, and distributed I/O modules that use RS-485 or RS-422 links. Building systems frequently connect equipment across rooms or floors where noise from motors, lighting, and power systems can disrupt single-ended communications. Differential signaling improves common-mode noise rejection, while the ADM3488ARZN's 250 kbps limit supports supervisory data, status reports, and configuration traffic without requiring a high-speed transceiver. Full-duplex operation can simplify point-to-point or four-wire networks by separating the transmit and receive conductors. The slew-rate-limited driver reduces unwanted spectral content, but installation practice still matters: use twisted pair where possible, maintain the intended grounding strategy, and avoid long unterminated branches that can produce reflections.

🌐

Embedded Equipment Gateways

The ADM3488ARZN fits embedded gateways that bridge a 3.3 V processor or microcontroller to an older industrial RS-485 or RS-422 network. Its 250 kbps maximum rate is appropriate for supervisory protocols, configuration exchange, and status monitoring rather than bulk file transfer. Because the transceiver is full duplex, gateway designs can maintain an inbound telemetry channel while transmitting commands or acknowledgments on a separate pair. The 8-SOIC package also keeps the interface compact enough for space-constrained controller boards. Designers should treat the transceiver as a physical-layer element: framing, addressing, timeout handling, and bus arbitration belong in the controller firmware. PCB routing should keep the cable-side traces short, pair the differential conductors consistently, and place any termination or protection components where they can be reached without disrupting the balanced path.

📡

Remote Sensor and Actuator Links

The ADM3488ARZN can connect a remote sensor or actuator controller when a moderate-speed differential link is required. Its 250 kbps capability is more than sufficient for periodic measurements, valve commands, switch states, and diagnostic packets, while full-duplex operation allows feedback to return while commands are being transmitted on a separate path. The low 3.3 V supply is helpful in distributed systems where interface power must remain constrained. The balanced signal path improves immunity to common-mode voltage encountered near motors, relays, and industrial equipment. However, communication reliability still depends on the overall installation: use twisted-pair cabling, apply termination according to the bus topology, confirm grounding conditions at both ends, and select external protection appropriate for the cable length and environmental surge exposure.

تجویز کردہ پروڈکٹس کا خلاصہ

ADM3490ARZ Analog Devices استعمال ہوتا ہے: Industrial Automation Interfaces, Motor Controller Communication, Embedded Equipment Gateways ADM3491ARZ Analog Devices استعمال ہوتا ہے: Industrial Automation Interfaces, Test and Measurement Instrumentation, Building Automation Networks, Embedded Equipment Gateways MAX3488EESA+ Maxim Integrated استعمال ہوتا ہے: Industrial Automation Interfaces, Motor Controller Communication, Building Automation Networks, Remote Sensor and Actuator Links ADM3488ARZ Closely related 3.3 V transceiver استعمال ہوتا ہے: Test and Measurement Instrumentation, Building Automation Networks, Remote Sensor and Actuator Links SP3071EEN-L 3.3 V differential transceiver alternative استعمال ہوتا ہے: Test and Measurement Instrumentation, Motor Controller Communication, Embedded Equipment Gateways, Remote Sensor and Actuator Links
What is the ADM3488ARZN?
The ADM3488ARZN is a 3.3 V, full-duplex RS-485/RS-422 transceiver rated for data rates up to 250 kbps. It integrates one differential driver and one differential receiver in an 8-pin SOIC package. According to the Analog Devices ADM3488 product page, its slew-rate-limited driver is intended for power-sensitive applications using a single 3.3 V supply.
Where can I download the ADM3488ARZN datasheet PDF?
The official ADM3488ARZN documentation is available through the Analog Devices ADM3488 product page linked on this page. It provides the family technical information, package information, and device details. Use the manufacturer datasheet when assigning pin functions, calculating cable or termination requirements, and checking the exact absolute maximum ratings for the complete ADM3488 family.
What is the pinout of the ADM3488ARZN?
The ADM3488ARZN uses an 8-pin SOIC package and implements a full-duplex differential transceiver. Use the pin-description table and package drawing in the Analog Devices ADM3488 documentation when assigning PCB tracks. The supply, ground, driver, receiver, and shutdown-related connections must be followed exactly because changing their functions can disrupt balance, termination, or power-control behavior.
What are the key specifications of ADM3488ARZN that engineers should know?
The principal ADM3488ARZN specifications are a 3.3 V supply, a maximum data rate of 250 kbps, full-duplex RS-485/RS-422 operation, slew-rate-limited signaling, and an 8-SOIC package. The Analog Devices product page identifies the device as a production low-power differential line transceiver. These ratings position it for moderate-speed, wired industrial communication rather than high-speed or isolated bus links.
Is the ADM3488ARZN suitable for RS-485 and RS-422 applications?
Yes, the ADM3488ARZN supports both RS-485 and RS-422 operation from a single 3.3 V supply. Its differential driver and receiver provide balanced signaling, while the full-duplex configuration allows simultaneous transmission and reception. The 250 kbps limit suits moderate-speed industrial links, but cable length, topology, and termination should be checked against the family data.
What is the difference between full-duplex and half-duplex operation?
Full-duplex operation uses separate differential transmit and receive paths, allowing the ADM3488ARZN to transmit and receive simultaneously. Half-duplex transceivers share a bidirectional pair and require direction control. Because the target supports full duplex, it does not require a shared bus for its own communication, although multiple nodes still need an arbitration strategy when they can transmit at the same time.
What can replace the ADM3488ARZN?
The ADM3488ARZ and several full-duplex 8-SOIC transceivers can serve as drop-in candidates, but the correct replacement depends on speed, supply voltage, shutdown behavior, protection, and pin assignment. The ADM3488ARZN is listed for 250 kbps operation from 3.3 V. Compare the complete pin-description table and electrical limits before substituting any device, especially where a shutdown or enable function is used.
Is the ADM3488ARZN the same as the ADM3488ARZ?
The ADM3488ARZN and ADM3488ARZ belong to the same ADM3488 device family and are associated with the 8-SOIC implementation, but the orderable suffix must still be checked before substitution. The ADM3488ARZN is the exact ordering code used on this page. Confirm reel or tape orientation, temperature grade, and every pin function against the manufacturer documentation before treating another suffix as interchangeable.
When should I choose the ADM3488ARZN instead of the ADM3490ARZ or ADM3491ARZ?
Choose the ADM3488ARZN when the design specifically requires the ADM3488 family function, a 250 kbps full-duplex RS-485/RS-422 link, and an 8-SOIC implementation. The ADM3490 and ADM3491 belong to the same low-power 3.3 V family and also support full-duplex communication, but their individual shutdown, loading, and protection characteristics may differ. Verify those functional differences before finalizing a replacement.
What is the best Maxim equivalent for the ADM3488ARZN?
The MAX3488EESA+ is the closest listed cross-brand candidate because it is a 3.3 V, slew-rate-limited RS-485/RS-422 transceiver in an 8-pin package. It also offers ±15 kV ESD protection according to the comparison listing. Verify its pin mapping, receiver thresholds, supply current, and bus-loading behavior against the ADM3488ARZN before using it as a drop-in replacement.
Is the MAX3488EESA+ a drop-in replacement for the ADM3488ARZN?
The MAX3488EESA+ can be considered as a drop-in candidate because it uses an 8-pin package and provides the same 3.3 V, slew-rate-limited RS-485/RS-422 transceiver function. Its ±15 kV ESD protection is a distinguishing feature. A production swap still requires checking exact pinout, propagation timing, receiver thresholds, shutdown behavior, and operating-temperature requirements.
Where can I buy the ADM3488ARZN online?
Use the Request a Quote form on this page to request the ADM3488ARZN, current availability, order quantity, and delivery information. The form allows the request to be matched to the exact ADM3488ARZN ordering code rather than a family-level or mechanically similar transceiver. Provide the required reel quantity, temperature expectations, and target quantity when requesting a quotation.
What is the price of the ADM3488ARZN?
The current commercial price for the ADM3488ARZN is shown through the Request a Quote form on this page. Because pricing depends on order quantity, packaging format, and current channel availability, use the form rather than relying on a historical catalog amount. Include the exact MPN ADM3488ARZN and your required production quantity when requesting a quote.
What is the lead time for the ADM3488ARZN?
Current lead time for the ADM3488ARZN should be requested through the Request a Quote form on this page. Include the quantity per reel, annual usage, and required delivery date so the supplier can confirm an appropriate supply plan. Analog Devices identifies the ADM3488 family as production, but production status alone does not establish the current stocking position for every orderable package.
Is the ADM3488ARZN in stock?
Current stock for the ADM3488ARZN can be checked through the Request a Quote form on this page. Submit the exact ordering code and required quantity so the response reflects the relevant supply channel. The manufacturer identifies the ADM3488 as a production device, while specific package inventory and lead time remain commercial details.
How should the ADM3488ARZN be laid out for reliable RS-485 operation?
Place the ADM3488ARZN close to the bus connector and route the driver and receiver conductors as tightly coupled differential pairs over a continuous ground plane. Keep stubs short, place decoupling capacitors near the supply pins, and use a termination strategy appropriate to the cable topology. The slew-rate-limited output reduces ringing, but correct routing remains essential for low EMI and dependable reception.

کے لیے انجینئرنگ ریفرنس ڈیٹا ADM3488ARZN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ADM3488ARZN for a 3.3 V, full-duplex RS-485 or RS-422 link that must operate at up to 250 kbps and fit an 8-SOIC footprint. Its slew-rate-limited driver is a practical choice for moderate-speed industrial cables where ringing and emissions must be controlled. Use ADM3488ARZ when that same family functionality and package are sufficient but the exact suffix has different reel or temperature details. Consider ADM3490ARZ or ADM3491ARZ when their shutdown, loading, or receiver characteristics better match the design, after checking every pin. MAX3488EESA+ is attractive when ±15 kV ESD protection is required, while SP3071EEN-L can be evaluated as another 3.3 V differential-transceiver source. Do not use half-duplex ADM3483 or ADM3485 devices as drop-in choices for a full-duplex board without redesigning the interface.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ADM3488ARZ ADM3490ARZ ADM3491ARZ MAX3488EESA+ SP3071EEN-L
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Maxim Integrated Exar
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Supported Standards RS-485/RS-422 RS-485/RS-422 RS-485/RS-422 RS-485/RS-422 RS-485/RS-422 RS-485/RS-422
Driver and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver

اہم امتیازی خصوصیات

  • Full-duplex operation in an 8-SOIC transceiver (بمقابلہADM3483EARZ)
  • Defined 3.3 V, 250 kbps operating class (بمقابلہSP3071EEN-L)
  • ESD-focused cross-brand option (بمقابلہMAX3488EESA+)
  • Direct family option for existing Analog Devices designs (بمقابلہADM3490ARZ)

ڈیزائن نوٹس

Place the ADM3488ARZN close to the external connector and route each differential pair as a tightly coupled impedance-controlled pair over a continuous ground reference. Keep connector stubs and test-point branches as short as practical. Route driver and receiver pairs together where possible, avoid crossing high-current switching paths, and keep the transceiver ground connection close to the device and decoupling capacitor to minimize common-mode voltage developed across the ground reference.

Do not assume that every 8-pin RS-485 transceiver is pin-compatible. Confirm the pin-description table, driver and receiver input mapping, shutdown behavior, receiver enable polarity, and exposed supply pins before substitution. In particular, half-duplex devices may require a direction-control connection and may not match a full-duplex design. Also verify the target board's termination strategy because replacing a device with different bus loading can alter reflections and level coverage.

The ADM3488ARZN's slew-rate-limited driver reduces high-frequency edge content, but layout quality determines actual emissions. Use twisted-pair cabling, maintain consistent pair spacing, avoid large copper discontinuities, and place cable-side protection components close to the connector. Keep switching regulators, motor-drive nodes, and high-di/dt paths away from the differential route. Verify compliance with the final product's EMC test configuration rather than assuming a controlled edge rate alone guarantees the required result.

Connect the 3.3 V supply to the device with low-impedance traces and place the required bypass capacitance immediately at the supply pins. Provide a quiet return path to the connector and protection devices so surge current does not flow through sensitive logic-ground regions. Confirm supply tolerance, startup behavior, and shutdown current against the manufacturer documentation for the selected orderable variant. Use local decoupling to suppress conducted noise while avoiding long supply loops.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available manufacturer and distributor listings identify the ADM3488 family as production but do not state the requested compliance classifications. AEC-Q100 is marked not applicable because the device is an industrial interface IC rather than an automotive-qualified component.

متعلقہ تلاشیں

ADM3488ARZN datasheet ADM3488ARZN datasheet pdf ADM3488ARZN pinout ADM3488ARZN equivalent ADM3488ARZN replacement ADM3488ARZN drop-in replacement ADM3488ARZN vs MAX3488EESA+ ADM3488ARZN price ADM3488ARZN stock Analog Devices ADM3488ARZN ADM3488 8-SOIC pinout ADM3488 250 kbps RS-485 application circuit

متعلقہ اجزاء اور اصطلاحات

Analog Devices ADM3488ARZN ADM3488 ADM3488ARZ ADM3490ARZ ADM3491ARZ MAX3488EESA+ SP3071EEN-L RS-485 RS-422 differential line transceiver interface IC full-duplex communication slew-rate-limited driver 3.3 V power supply 250 kbps data rate differential signaling common-mode noise rejection SOIC-8 surface-mount package industrial automation building automation test and measurement motor controller embedded gateway
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں