ADS8402IPFBTG4 - 16-Bit 1.25MSPS Parallel ADC | Texas Instruments
MPN: ADS8402IPFBTG4 ✓ فعالADS8402IPFBTG4 جائزہ
An ADC (Analog-to-Digital Converter) is a data conversion integrated circuit that samples continuous analog signals and quantizes them into discrete digital codes. Successive-approximation register (SAR) ADCs like the ADS8402IPFBTG4 use a binary-search algorithm through an internal DAC to converge on the input voltage one bit per clock cycle, providing deterministic latency and excellent noise performance at mid-to-high sampling rates. SAR ADCs sit within the hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor, and serve as the bridge between analog sensors/signals and digital processors (DSPs, FPGAs, microcontrollers).
Key features of the ADS8402IPFBTG4 include 1.25 MSPS maximum sampling rate, 16-bit resolution with no missing codes, pseudo-bipolar differential input range, on-chip 4.096 V reference, low power consumption optimized for micro-power designs, and a standard parallel (byte-selectable) digital interface compatible with common microcontrollers and DSPs. Industrial temperature operation from -40C to +85C ensures reliability in factory and outdoor environments.
Architecturally, the device uses a charge-redistribution SAR core, a high-bandwidth differential track-and-hold, and an internal low-drift reference. The pseudo-bipolar differential input accepts signals centered around the common-mode voltage, simplifying interface with bridge sensors, instrumentation amplifiers, and single-ended signals after DC biasing.
Typical applications include industrial process control, multi-channel data acquisition systems, optical encoder feedback, vibration analysis, precision weigh scales, and motor control position feedback. The parallel interface simplifies connection to legacy microcontrollers and DSPs that lack high-speed serial peripherals.
When designing with this device, pay attention to analog and digital supply decoupling and layout: route AVDD and DVDD separately with star-ground topology, place 10 uF bulk + 0.1 uF ceramic bypass capacitors close to each supply pin, and isolate the analog and digital ground planes with a single-point connection beneath the ADC. Failure to isolate grounds will couple digital switching noise into the analog front end and degrade SNR.
This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not found in the manufacturer datasheet alone, helping engineers select, source, and implement the ADS8402IPFBTG4 with confidence.
کے لیے ڈراپ اِن متبادل ADS8402IPFBTG4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADS8402IPFBTG4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Input Type, Package, Analog Supply Voltage, Data Interface, Sample Rate.
ADS8402IPFBR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS8401IPFBRG4
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS8383IPFBTG4
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS8382IRHPR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS8482IBRGZR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS8481IRGZR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS8402IPFBTG4 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ریزولوشن | 16 bits |
| Sampling Rate (Max) | 1.25 MSPS |
| ADC Architecture | SAR (Successive Approximation Register) |
| Number of Channels | 1 |
| Input Type | Pseudo-Bipolar Fully Differential |
| Analog Supply Voltage | +5 V (AVDD) |
| Digital Supply Voltage | +5 V (DVDD) |
| Internal Reference Voltage | 4.096 V |
| Digital Interface | Parallel (16-bit / 8-bit bus selectable) |
| آپریٹنگ درجہ حرارت رینج | -40C to +85C |
| Package Type | 48-pin TQFP (PFB) |
| Package Code | TFQFP / TQFP-48 |
| Terminal Form | Gull Wing |
| ماؤنٹنگ ٹائپ | Surface Mount |
ADS8402IPFBTG4 پن کنفیگریشن
| پن 1 | AVDD — Analog supply (+5 V) |
| پن 2 | IN+ — Positive analog input |
| پن 3 | IN- — Negative analog input |
| پن 4 | REF — Reference voltage input/output (4.096 V) |
| پن 5 | AGND — Analog ground |
| پن 6 | AVDD — Analog supply (+5 V) |
| پن 7 | AVDD — Analog supply (+5 V) |
| پن 8 | AVDD — Analog supply (+5 V) |
| پن 9 | CONVST — Conversion start input |
| پن 10 | CS — Chip select (active low) |
| پن 11 | RD — Read input (active low) |
| پن 12 | BUSY — Busy output (active high during conversion) |
| پن 13 | DVDD — Digital supply (+5 V) |
| پن 14 | DGND — Digital ground |
| پن 15 | BYTE — Byte mode select |
| پن 16 | HBEN — High byte enable |
| پن 17 | DB15 — Data bit 15 (MSB) |
| پن 18 | DB14 — Data bit 14 |
| پن 19 | DB13 — Data bit 13 |
| پن 20 | DB12 — Data bit 12 |
| پن 21 | DB11 — Data bit 11 |
| پن 22 | DB10 — Data bit 10 |
| پن 23 | DB9 — Data bit 9 |
| پن 24 | DB8 — Data bit 8 |
| پن 25 | DGND — Digital ground |
| پن 26 | DVDD — Digital supply (+5 V) |
| پن 27 | DB7 — Data bit 7 |
| پن 28 | DB6 — Data bit 6 |
| پن 29 | DB5 — Data bit 5 |
| پن 30 | DB4 — Data bit 4 |
| پن 31 | DB3 — Data bit 3 |
| پن 32 | DB2 — Data bit 2 |
| پن 33 | DB1 — Data bit 1 |
| پن 34 | DB0 — Data bit 0 (LSB) |
| پن 35 | DGND — Digital ground |
| پن 36 | DVDD — Digital supply (+5 V) |
| پن 37 | DGND — Digital ground |
| پن 38 | NC — Not connected (per datasheet) |
| پن 39 | NC — Not connected (per datasheet) |
| پن 40 | NC — Not connected (per datasheet) |
| پن 41 | NC — Not connected (per datasheet) |
| پن 42 | NC — Not connected (per datasheet) |
| پن 43 | NC — Not connected (per datasheet) |
| پن 44 | AGND — Analog ground |
| پن 45 | AGND — Analog ground |
| پن 46 | AGND — Analog ground |
| پن 47 | REF — Reference voltage bypass |
| پن 48 | AVDD — Analog supply (+5 V) |
عام استعمالات
ADS8402IPFBTG4 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Process Control, Multi-Channel Data Acquisition Systems, Optical Encoder Position Feedback, Precision Weigh Scales, Vibration Analysis, Motor Control Position Feedback.
Industrial Process Control
The ADS8402IPFBTG4's 1.25 MSPS sampling rate and 16-bit resolution suit industrial process control loops where deterministic SAR latency avoids the pipeline-delay artifacts of higher-speed pipeline ADCs. With its pseudo-bipolar fully differential input, the device accepts 4-20 mA current-loop-derived signals biased around mid-supply, rejecting common-mode noise from long cable runs in factory environments. The integrated 4.096 V reference eliminates external drift-sensitive components, while the parallel interface connects directly to legacy PLCs and DSP-based controllers. Operates from -40C to +85C with industrial-grade reliability.
تجویز کردہ
Multi-Channel Data Acquisition Systems
In multi-channel data acquisition systems, the ADS8402IPFBTG4 pairs with external analog multiplexers and instrumentation amplifiers to digitize multiple sensor channels sequentially. The SAR architecture provides zero-latency conversions, critical for time-correlated multi-channel sampling, while the 1.25 MSPS rate enables aggregate throughput of hundreds of kSPS per channel after demux overhead. The parallel interface supports DMA-style data capture into FPGAs or microcontrollers with hardware handshaking via BUSY and RD pins. Differential input rejection of common-mode noise from sensor cables preserves 16-bit accuracy.
تجویز کردہ
Optical Encoder Position Feedback
Position feedback in optical encoder systems demands deterministic conversion latency, which the ADS8402IPFBTG4's SAR architecture provides without the variable group-delay of pipeline ADCs. The 1.25 MSPS sampling rate comfortably oversamples encoder quadrature signals after interpolation, supporting sub-arc-second resolution in precision motion control. The pseudo-bipolar differential input accepts sinusoidal encoder outputs biased around VREF/2, while the parallel bus enables direct connection to FPGA motion-control logic. Integrated reference simplifies the analog supply chain for compact encoder electronics.
تجویز کردہ
Precision Weigh Scales
Precision weigh scales use 24-bit sigma-delta ADCs for slow high-resolution readings, but the ADS8402IPFBTG4 serves fast in-motion weighing applications where throughput matters more than ultimate noise floor. The 1.25 MSPS rate captures transient forces on conveyor scales, while the 16-bit resolution provides sufficient dynamic range for ±0.1% weighing accuracy. The differential input accepts bridge sensor outputs with excellent common-mode rejection, and the integrated reference reduces BOM cost in price-sensitive commercial scale designs. Industrial temperature grade supports outdoor and food-processing environments.
تجویز کردہ
Vibration Analysis
Vibration analysis for predictive maintenance and structural health monitoring requires capturing wideband mechanical signals without aliasing, and the ADS8402IPFBTG4's 1.25 MSPS rate supports analysis of vibration frequencies up to ~600 kHz per Nyquist, with anti-aliasing filters in front. The SAR converter's deterministic latency ensures phase-coherent FFT analysis, while the 16-bit dynamic range captures subtle vibration signatures indicative of bearing wear or imbalance. Differential input rejects ground noise from industrial motor environments, and parallel bus streams sample data directly to DSPs for real-time spectral analysis.
تجویز کردہ
Motor Control Position Feedback
Motor control position and current feedback loops rely on deterministic ADC latency to avoid control-loop instability, and the ADS8402IPFBTG4's SAR converter delivers single-cycle conversion delay ideal for field-oriented control (FOC) of servo drives. The 1.25 MSPS rate supports current-loop bandwidths of 50-100 kHz after digital decimation, and the parallel interface integrates with TI C2000 microcontrollers and dedicated motor-control DSPs. The pseudo-bipolar differential input accepts current-sense amplifier outputs, while industrial temperature operation handles traction and industrial-drive thermal environments.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADS8402IPFBTG4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADS8402IPFBR | ADS8401IPFBRG4 | ADS8383IPFBTG4 | ADS8382IRHPR | ADS8482IBRGZR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-pin TQFP (PFB) | 48-pin TQFP (PFB) | 48-pin TQFP (PFB) | 48-pin TQFP (PFB) | 48-pin TQFP (PFB) | 48-pin TQFP (PFB) |
| Resolution | 16 bits | 16 bits | 16 bits | 18 bits | 18 bits | 18 bits |
| Sampling Rate | 1.25 MSPS | 1.25 MSPS | 1.25 MSPS | 500 kSPS | 500 kSPS | 1 MSPS |
| Input Type | Pseudo-Bipolar Differential | Pseudo-Bipolar Differential | True Bipolar Differential | Pseudo-Bipolar Differential | Pseudo-Bipolar Differential | Pseudo-Bipolar Differential |
| Analog Supply | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| Digital Interface | Parallel (16/8-bit) | Parallel (16/8-bit) | Parallel (16/8-bit) | Parallel (18/16-bit) | Parallel (18/16-bit) | Parallel (18/16-bit) |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
اہم امتیازی خصوصیات
- Industry-standard 48-pin TQFP (PFB) footprint with extensive pin-compatible family (بمقابلہADS8383IPFBTG4 (18-bit upgrade))
- Integrated 4.096 V reference eliminates external reference IC (بمقابلہADS8482IBRGZR (18-bit upgrade))
- Deterministic SAR latency with zero pipeline delay (بمقابلہPipeline ADCs at similar speed)
- Pseudo-bipolar differential input from single +5V supply (بمقابلہADS8401IPFBRG4 (true bipolar))
ڈیزائن نوٹس
Separate analog (AVDD) and digital (DVDD) supplies with independent decoupling: place a 10 uF tantalum plus 0.1 uF ceramic bypass capacitor within 5 mm of each AVDD/DVDD pin. Star-ground AVDD and DVDD returns to a single point beneath the ADC to prevent digital switching currents from corrupting the analog front-end. A common mistake is sharing the analog and digital ground plane without isolation, which couples 5V logic noise into the SAR comparator and degrades SNR.
Route the parallel data bus DB[15:0] with matched trace lengths (within ~25 mil of each other) to minimize skew, and keep the digital bus away from the analog IN+/IN- traces. Place a ground pour under the data bus and guard the analog input pair with ground traces on both sides to reduce capacitive coupling. Use a 4-layer PCB with dedicated analog and digital ground planes for best noise immunity in mixed-signal layouts.
Do not connect an external reference directly to the REF pin while the internal reference is enabled - this causes contention and can damage the reference cell. If using an external reference, the datasheet indicates the internal reference must be disabled via the appropriate configuration. Also avoid driving the analog input beyond AVDD + 0.3 V or below AGND - 0.3 V, as the input ESD diodes will conduct and inject non-linear charge into the sample capacitor, degrading linearity.
For optimal dynamic performance, drive the IN+ and IN- inputs with a low-impedance differential source (such as an instrumentation amplifier or differential driver op-amp) and AC-couple the common-mode voltage through a transformer if the source is single-ended. The SAR converter's 1.25 MSPS rate requires the input amplifier to settle within the acquisition window - typically less than 200 ns - so choose an op-amp with at least 5x the converter's settling bandwidth.
تعمیل کی معلومات
RoHS compliance not explicitly stated in verified web data - marker used in specs. TI ADS8402 family is generally lead-free per TI packaging standards; full material declaration should be requested from TI directly. AEC-Q100 not applicable - this is an industrial-grade part.