AKM (Asahi Kasei Microdevices)

AK4121AVF - 24-Bit Asynchronous Audio Sample Rate Converter | AKM

MPN: AK4121AVF ✓ فعال
3 V to 3.6 V Vdss 24-VSOP Package 8 kHz Speed
MOQ: 1 |

AK4121AVF جائزہ

The Asahi Kasei Microdevices AK4121AVF is an asynchronous sample rate converter for audio data, supporting sampling frequencies from 8 kHz to 96 kHz with a 3 V to 3.6 V supply in a 24-VSOP package. It converts digital audio streams whose clocks and sample rates differ, making the device useful in audio systems that require clock-domain isolation or format-rate adaptation.

An asynchronous sample rate converter is a digital audio interface IC that accepts input audio samples at one clock-derived rate and reconstructs them at another output rate. Its role within an audio signal chain is broader than ordinary sample-format conversion: it must accommodate mismatched sample rates, generate the required output clock, and preserve usable audio quality while the system clock relationship is changing. The AK4121AVF is designed for applications involving digital audio sources, DACs, and clock domains operating at different rates.

Key identified features include one-channel audio processing, a 24-VSOP surface-mount package, and an 8 kHz to 96 kHz sampling-frequency range. The 3 V to 3.6 V operating supply allows integration with common low-voltage digital audio systems. Because it is an asynchronous converter, the device can bridge independently generated or unrelated clocks instead of requiring both sides to share a continuous integer ratio. Its exact dynamic-range, bit-depth, clock-mode, and interface-format details must be confirmed from the manufacturer datasheet before schematic capture.

The AK4121AVF occupies the interface and clock-conversion layer of a digital audio design. In a source-to-DAC architecture, it receives serial audio data and clock information, computes the appropriate sample correspondence, and presents a correctly paced stream to the downstream converter. Practical implementation depends on correct master/slave mode assignment, logical interface voltage compatibility, suitable source clocks, and stable supplies. A single converter channel also makes the part appropriate for mono paths and for applications that replicate or process channels separately.

Typical uses include digital audio equipment, clock-domain adaptation between a host processor and an audio DAC, broadcast or communications audio paths, and consumer audio products that accept asynchronous rates. In a portable product, its 24-VSOP package and single-channel architecture can simplify routing compared with a multi-channel converter. In laboratory and industrial systems, the converter is useful when the incoming audio transport and output device cannot share one stable clock.

Designers should verify the exact supported digital-audio formats, input and output clock requirements, serial word width, and recommended external components against the manufacturer datasheet. Layout must keep clock and data traces short, provide a low-impedance supply connection, and return unused interface pins according to the pin-description table. Signal-integrity and grounding choices are especially important when the converter separates two independently referenced audio clock domains.

This page combines the identified AK4121AVF specifications, package information, sourcing workflow, design considerations, and verified substitution limits. It also distinguishes confirmed technical facts from parameters that require direct review of the manufacturer datasheet, helping engineers plan the interface before committing the 24-VSOP footprint to a PCB.

کے لیے ڈراپ اِن متبادل AK4121AVF — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

AK4121AVF تفصیلات

Device Type Asynchronous sample rate converter
Manufacturer Asahi Kasei Microdevices
Audio Channel Count 1 channel
Supply Voltage Range 3 V to 3.6 V
Minimum Sampling Frequency 8 kHz
Maximum Sampling Frequency 96 kHz
Converter Type Asynchronous
پیکیج 24-VSOP
Package Family 24-LSSOP
ماؤنٹنگ ٹائپ Surface mount
Manufacturer Device Package 24-VSOP
Component Category Audio Special Purpose

AK4121AVF 24-vsop پن کنفیگریشن گائیڈ

AK4121AVF (24-vsop پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

AK4121AVF کے لیے 24-vsop پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AK4121AVF.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

AK4121AVF کے لیے موزوں ہے 6 ایپلیکیشنs: Asynchronous Digital Audio Interface, Audio DAC Clock Adaptation, Digital Audio Host Interfacing, Communications Audio Equipment, Professional Audio Monitoring, Portable Audio Products.

🎧

Asynchronous Digital Audio Interface

The AK4121AVF fits between a digital audio source and a downstream DAC when the source and destination do not share a continuously related master clock. Its asynchronous conversion approach allows audio samples to be transferred between clock domains that are not locked by a stable integer ratio, while the device supports sampling frequencies from 8 kHz to 96 kHz. The 3 V to 3.6 V supply is suitable for low-voltage digital audio logic. Designers should confirm the supported serial formats, master or slave clock assignments, and recommended external components in the manufacturer datasheet before committing the interface.

🎧

Audio DAC Clock Adaptation

AK4121AVF can provide a practical boundary between an audio host or transport and a DAC operating from a different clock. Instead of requiring the entire system to inherit one fixed-ratio clock relationship, the converter presents an asynchronously sampled stream suitable for the downstream device. Its one-channel architecture is particularly appropriate for mono DAC paths or per-channel implementations. The 8 kHz to 96 kHz range accommodates several common audio rates, but the selected source and destination rates, logic levels, and clock polarity must be checked against the manufacturer timing requirements before layout.

🖥️

Digital Audio Host Interfacing

The AK4121AVF can adapt serial audio data originating in a processor, interface controller, or digital transport so it can proceed toward a DAC or audio subsystem with different timing. Asynchronous operation is valuable when the host cannot generate a stable sample-rate-locked clock for the audio endpoint. With a one-channel converter, a mono signal path remains compact, and the 24-VSOP package limits board area compared with larger converter solutions. Firmware timing alone does not replace hardware clock discipline, so the input and output clock sources must meet the converter's electrical and frequency conditions.

🌐

Communications Audio Equipment

In communications equipment, audio transport clocks may originate from a network, codec, or baseband subsystem that is not synchronized to the local playback converter. AK4121AVF provides a dedicated one-channel asynchronous conversion stage for such mismatched domains, with support across 8 kHz to 96 kHz sampling frequencies. This makes it relevant to voice terminals, networked audio endpoints, and professional monitoring paths. The 3 V to 3.6 V operating range supports integration with modern digital logic, while the 24-VSOP package simplifies routing compared with a multi-channel converter. Audio format and clock-mode compatibility remain essential design checks.

🎧

Professional Audio Monitoring

AK4121AVF can serve in a professional audio monitoring chain when a converter, workstation, or digital mixer supplies data at a rate that differs from the monitoring DAC clock. The asynchronous architecture allows those domains to operate without a permanent integer ratio, while the supported 8 kHz to 96 kHz range covers many production and playback formats. The single-channel implementation is appropriate for individual monitoring or conversion channels and can simplify system partitioning. For a high-quality implementation, verify the manufacturer's timing, jitter, signal-to-noise, and distortion characteristics under the intended sample rate and loading conditions.

📱

Portable Audio Products

The AK4121AVF is suitable for portable audio designs that must accommodate digital sources operating at different rates, particularly where a codec, wireless audio link, and DAC do not share one continuous master-clock relationship. Its one-channel architecture avoids allocating a multi-channel converter when only a single route needs adaptation, and the 24-VSOP package supports compact surface-mount layouts. The 3 V to 3.6 V supply range aligns with many portable digital subsystems. Battery-powered implementations should still inspect quiescent and active current, clock requirements, and power sequencing in the manufacturer documentation before final platform integration.

What is the AK4121AVF?
The AK4121AVF is a one-channel asynchronous sample rate converter from Asahi Kasei Microdevices. According to the manufacturer product information, it handles sampling frequencies from 8 kHz to 96 kHz, operates from a 3 V to 3.6 V supply, and is packaged in a 24-VSOP. Its primary function is to adapt digital audio sample rates between operating domains whose clocks are not continuously related.
What are the key specifications of AK4121AVF that engineers should know?
The AK4121AVF combines one-channel asynchronous sample-rate conversion, an 8 kHz to 96 kHz sampling-frequency range, and a 3 V to 3.6 V supply in a 24-VSOP package. Manufacturer product information identifies it as an Audio Special Purpose IC and describes the package as 24-LSSOP. Before finalizing the design, consult the manufacturer datasheet for exact serial-interface formats, clock modes, resolution, and performance limits.
What sampling frequencies does AK4121AVF support?
The AK4121AVF supports digital audio sampling frequencies from 8 kHz to 96 kHz. This range covers common voice, compact-disc-rate, and professional-audio interface rates used in asynchronous audio paths. The actual input and output operating combination must remain within the detailed conditions and mode restrictions specified by the manufacturer datasheet, especially when source and destination clocks are independent.
Where can I download the AK4121AVF datasheet PDF?
The AK4121AVF datasheet can be accessed through the manufacturer product page at https://www.akm-semi.com/AK4121AVF/540018 or through the listed manufacturer-datasheet mirrors. Use the manufacturer document for authoritative pin assignments, electrical characteristics, clocking diagrams, interface timing, and recommended application circuits. The manufacturer page is the preferred starting point when revisions or notices may have changed.
Where can I find the AK4121AVF pinout?
The AK4121AVF pinout is defined by the pin-description table in the manufacturer datasheet. The component uses a 24-VSOP package, but the exact functions of all 24 terminals and their handling requirements must be copied directly from that table rather than inferred from another converter. Assign PCB nets only after checking power, ground, clock, data, mode-control, and unused-pin requirements for the selected operating mode.
Is AK4121AVF suitable for digital audio clock conversion?
Yes, the AK4121AVF is specifically intended for asynchronous digital audio sample-rate conversion. It is appropriate when an input transport and downstream DAC or audio processor operate from unrelated clocks and cannot maintain a stable integer sample-rate ratio. Correct implementation still requires compatible logic levels, valid clocks, supported serial formats, and careful routing of the high-speed clock and data signals.
What is the difference between AK4121AVF and a fixed-ratio sample rate converter?
The AK4121AVF is designed to operate as an asynchronous sample rate converter, whereas a fixed-ratio converter assumes a continuous and predictable relationship between input and output clocks. Asynchronous operation allows the converter to accommodate unrelated clock domains, which is useful in systems whose master clock changes or whose source device does not share the DAC clock. Detailed mode behavior should be checked in the manufacturer datasheet.
AK4121AVF versus AK4121 — which is better for asynchronous audio conversion?
AK4121AVF is the orderable 24-VSOP version specified for a one-channel asynchronous sample rate converter with 8 kHz to 96 kHz sampling support. A base-family comparison should compare AK4121AVF against another exact AK4121 suffix only after checking pinout, supply, interface format, and clock-mode differences. The manufacturer datasheet and the exact suffix ordering information are the controlling references for that decision.
When should I choose AK4121AVF instead of another audio interface converter?
Choose AK4121AVF when the design needs one asynchronous digital audio channel, a sampling range of 8 kHz to 96 kHz, a 3 V to 3.6 V supply, and a 24-VSOP footprint. It is especially suitable when the source and destination use unrelated clocks. Choose another converter when multi-channel conversion, a different package, another voltage range, or unsupported serial format is required.
What is the best drop-in replacement for AK4121AVF?
No verified drop-in replacement for AK4121AVF is identified in the available substitution results. A genuine replacement must match the 24-VSOP footprint, pin assignments, 3 V to 3.6 V supply range, asynchronous conversion behavior, clock modes, and digital-audio interfaces; a similar sample-rate-converter description alone is insufficient. Use the Request a Quote form on this page when sourcing the exact original or asking for qualification of a proposed substitute.
Can another Asahi Kasei Microdevices converter replace AK4121AVF?
A candidate from the same manufacturer can replace AK4121AVF only after its exact suffix has been confirmed to use the same 24-VSOP pinout and matching electrical and clock interfaces. The available substitution results do not identify a verified pin-compatible AK4121-family alternative. Request the candidate datasheet and compare every pin, power domain, clock requirement, and serial format before treating it as a drop-in replacement.
What is the best cross-brand equivalent for AK4121AVF?
No verified cross-brand drop-in equivalent for AK4121AVF is identified. Functional similarity is insufficient because a valid substitute must preserve the 24-VSOP land pattern, asynchronous clock behavior, digital-audio data interface, and electrical limits. If a cross-brand device is being considered, verify its pinout and manufacturer qualification requirements directly and treat it as a new design-review item rather than an automatic replacement.
Where can I buy AK4121AVF, and what is the price?
AK4121AVF can be sourced by submitting the exact MPN through the Request a Quote form on this page. The form is the appropriate route for current commercial terms, quantity availability, lead time, and ordering. The part is identified as a one-channel 24-VSOP asynchronous sample rate converter, but commercial availability should be confirmed at the time of quotation rather than inferred from an old catalog record.
Is AK4121AVF in stock and what is its lead time?
Current stock and lead time for AK4121AVF should be confirmed through the Request a Quote form on this page. Because inventory and production schedules can change by region, quantity, date, and traceable-code requirements, do not rely on a historical listing as a current availability guarantee. Include your required quantity, target date, and any delivery or traceability requirements with the quotation request.
How should AK4121AVF be laid out for reliable audio operation?
Place AK4121AVF close to the clock and audio-data connections, keep those traces short, and provide a low-impedance supply and ground path. Use the manufacturer datasheet's recommended decoupling and external-component values rather than generic substitutions. Clock and data routing should avoid long parallel runs and unnecessary stubs, while grounding should follow the device's recommended single-point or multi-point connection strategy.
What power and thermal considerations apply to AK4121AVF?
The AK4121AVF operates from a 3 V to 3.6 V supply and is implemented in a 24-VSOP package. Its exact operating current, thermal resistance, and maximum supply limits must be taken from the manufacturer datasheet. Keep the supply within the stated range, provide local decoupling, and route high-current return paths away from sensitive audio interfaces to minimize ground bounce and supply disturbance.
Is AK4121AVF RoHS compliant and automotive qualified?
The RoHS, REACH, lead-free, halogen-free, and automotive-qualification status of AK4121AVF are not stated in the available product information, so these attributes should remain unconfirmed for procurement and qualification purposes. Check the manufacturer datasheet, material declaration, and quality documentation for the exact ordering code. Use the Request a Quote form when your organization requires current compliance documents.

کے لیے انجینئرنگ ریفرنس ڈیٹا AK4121AVF — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose AK4121AVF when a design requires one digital audio channel to cross between clock domains that do not maintain a stable integer sample-rate ratio. Its asynchronous architecture and identified 8 kHz to 96 kHz range are well suited to audio paths involving independent source and destination clocks, while the 3 V to 3.6 V supply and 24-VSOP package simplify low-voltage surface-mount integration. It is less suitable when multiple channels must be converted in one package, when a fixed-ratio divider would be sufficient, or when the required interface format, clock mode, resolution, or package differs. Before ordering, verify the complete pinout, timing, performance, and lifecycle details from the manufacturer datasheet. If the design requires an alternative, do not assume that another asynchronous converter is interchangeable; a genuine drop-in must reproduce the physical pinout, supply limits, clock behavior, and digital-audio interface.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Package 24-VSOP
Brand Asahi Kasei Microdevices
Device Type Asynchronous sample rate converter
Audio Channel Count 1 channel
Supply Voltage Range 3 V to 3.6 V
Minimum Sampling Frequency 8 kHz
Maximum Sampling Frequency 96 kHz
Mounting Type Surface mount
Component Category Audio Special Purpose

اہم امتیازی خصوصیات

  • Asynchronous sample-rate conversion supports unrelated clock domains (بمقابلہFixed-ratio sample rate converter)
  • Compact one-channel 24-VSOP implementation (بمقابلہMulti-channel audio converter)
  • Low-voltage operation for digital audio integration (بمقابلہHigher-voltage sample rate converter)

ڈیزائن نوٹس

Place the AK4121AVF close to the devices exchanging clock and audio data, and route the critical input and output connections as short as practical. Avoid long traces, unnecessary pads, and branches that could behave as unintended stubs. Define clock and data topology early because moving an asynchronous converter after placement can force rerouting of several timing-sensitive nets. Use the manufacturer's recommended reference layout and external component arrangement as the geometric baseline.

Treat both clock signals and serial audio data as timing-sensitive connections. Maintain the logic levels and edge rates required by the supported interface mode, and keep return paths continuous beneath or adjacent to the routed signals where the board stack-up permits. Do not assume that nominal sample-rate compatibility guarantees correct behavior; asynchronous conversion still requires clean clocks and a valid relationship between the device's modes and external timing.

Operate the supply strictly within the identified 3 V to 3.6 V range and follow the manufacturer recommendation for local bypass capacitors and supply routing. Place the principal decoupling component close to the appropriate supply pin and provide a low-impedance ground return. Verify startup and shutdown sequencing against any host-controlled clocks because enabling the converter before its clock or supply conditions stabilize can produce unreliable interface operation.

Do not select a substitute solely because its description includes sample rate conversion or asynchronous operation. A valid drop-in candidate must match the 24-VSOP footprint and every functional pin, use the same supported supply range, and implement compatible clock modes and audio formats. Obtain the candidate manufacturer datasheet and complete a pin-by-pin comparison before changing the BOM, since an electrically similar converter can still require different routing or firmware.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available product information does not state compliance or automotive-qualification status for AK4121AVF. Request current manufacturer material and quality declarations for the exact ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

AK4121AVF datasheet AK4121AVF pinout AK4121AVF datasheet pdf AK4121AVF equivalent AK4121AVF replacement AK4121AVF price AK4121AVF stock AK4121AVF 24-VSOP AK4121AVF asynchronous converter AK4121AVF 8kHz 96kHz AK4121AVF audio interface AK4121AVF application circuit

متعلقہ اجزاء اور اصطلاحات

Asahi Kasei Microdevices AK4121AVF Asynchronous sample rate converter Digital audio converter Audio interface IC Interface IC Integrated circuit Semiconductor Digital audio Sample rate conversion Asynchronous conversion Master clock Slave clock Audio DAC Digital audio host Clock domain crossing Audio clock Serial audio data 8 kHz sampling frequency 96 kHz sampling frequency 3 V to 3.6 V power supply 24-VSOP 24-LSSOP Surface-mount package
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں