AK4121AVF - 24-Bit Asynchronous Audio Sample Rate Converter | AKM
부품 번호: AK4121AVF ✓ 활성AK4121AVF 개요
An asynchronous sample rate converter is a digital audio interface IC that accepts input audio samples at one clock-derived rate and reconstructs them at another output rate. Its role within an audio signal chain is broader than ordinary sample-format conversion: it must accommodate mismatched sample rates, generate the required output clock, and preserve usable audio quality while the system clock relationship is changing. The AK4121AVF is designed for applications involving digital audio sources, DACs, and clock domains operating at different rates.
Key identified features include one-channel audio processing, a 24-VSOP surface-mount package, and an 8 kHz to 96 kHz sampling-frequency range. The 3 V to 3.6 V operating supply allows integration with common low-voltage digital audio systems. Because it is an asynchronous converter, the device can bridge independently generated or unrelated clocks instead of requiring both sides to share a continuous integer ratio. Its exact dynamic-range, bit-depth, clock-mode, and interface-format details must be confirmed from the manufacturer datasheet before schematic capture.
The AK4121AVF occupies the interface and clock-conversion layer of a digital audio design. In a source-to-DAC architecture, it receives serial audio data and clock information, computes the appropriate sample correspondence, and presents a correctly paced stream to the downstream converter. Practical implementation depends on correct master/slave mode assignment, logical interface voltage compatibility, suitable source clocks, and stable supplies. A single converter channel also makes the part appropriate for mono paths and for applications that replicate or process channels separately.
Typical uses include digital audio equipment, clock-domain adaptation between a host processor and an audio DAC, broadcast or communications audio paths, and consumer audio products that accept asynchronous rates. In a portable product, its 24-VSOP package and single-channel architecture can simplify routing compared with a multi-channel converter. In laboratory and industrial systems, the converter is useful when the incoming audio transport and output device cannot share one stable clock.
Designers should verify the exact supported digital-audio formats, input and output clock requirements, serial word width, and recommended external components against the manufacturer datasheet. Layout must keep clock and data traces short, provide a low-impedance supply connection, and return unused interface pins according to the pin-description table. Signal-integrity and grounding choices are especially important when the converter separates two independently referenced audio clock domains.
This page combines the identified AK4121AVF specifications, package information, sourcing workflow, design considerations, and verified substitution limits. It also distinguishes confirmed technical facts from parameters that require direct review of the manufacturer datasheet, helping engineers plan the interface before committing the 24-VSOP footprint to a PCB.
드롭인 대체품: AK4121AVF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청AK4121AVF 사양
| Device Type | Asynchronous sample rate converter |
| Manufacturer | Asahi Kasei Microdevices |
| Audio Channel Count | 1 channel |
| Supply Voltage Range | 3 V to 3.6 V |
| Minimum Sampling Frequency | 8 kHz |
| Maximum Sampling Frequency | 96 kHz |
| Converter Type | Asynchronous |
| 패키지 | 24-VSOP |
| Package Family | 24-LSSOP |
| 실장 유형 | Surface mount |
| Manufacturer Device Package | 24-VSOP |
| Component Category | Audio Special Purpose |
AK4121AVF 24-vsop 핀 구성 가이드
AK4121AVF(24-vsop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: AK4121AVF.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AK4121AVF 적합 용도: 6 애플리케이션s: Asynchronous Digital Audio Interface, Audio DAC Clock Adaptation, Digital Audio Host Interfacing, Communications Audio Equipment, Professional Audio Monitoring, Portable Audio Products.
Asynchronous Digital Audio Interface
The AK4121AVF fits between a digital audio source and a downstream DAC when the source and destination do not share a continuously related master clock. Its asynchronous conversion approach allows audio samples to be transferred between clock domains that are not locked by a stable integer ratio, while the device supports sampling frequencies from 8 kHz to 96 kHz. The 3 V to 3.6 V supply is suitable for low-voltage digital audio logic. Designers should confirm the supported serial formats, master or slave clock assignments, and recommended external components in the manufacturer datasheet before committing the interface.
추천
Audio DAC Clock Adaptation
AK4121AVF can provide a practical boundary between an audio host or transport and a DAC operating from a different clock. Instead of requiring the entire system to inherit one fixed-ratio clock relationship, the converter presents an asynchronously sampled stream suitable for the downstream device. Its one-channel architecture is particularly appropriate for mono DAC paths or per-channel implementations. The 8 kHz to 96 kHz range accommodates several common audio rates, but the selected source and destination rates, logic levels, and clock polarity must be checked against the manufacturer timing requirements before layout.
추천
Digital Audio Host Interfacing
The AK4121AVF can adapt serial audio data originating in a processor, interface controller, or digital transport so it can proceed toward a DAC or audio subsystem with different timing. Asynchronous operation is valuable when the host cannot generate a stable sample-rate-locked clock for the audio endpoint. With a one-channel converter, a mono signal path remains compact, and the 24-VSOP package limits board area compared with larger converter solutions. Firmware timing alone does not replace hardware clock discipline, so the input and output clock sources must meet the converter's electrical and frequency conditions.
추천
Communications Audio Equipment
In communications equipment, audio transport clocks may originate from a network, codec, or baseband subsystem that is not synchronized to the local playback converter. AK4121AVF provides a dedicated one-channel asynchronous conversion stage for such mismatched domains, with support across 8 kHz to 96 kHz sampling frequencies. This makes it relevant to voice terminals, networked audio endpoints, and professional monitoring paths. The 3 V to 3.6 V operating range supports integration with modern digital logic, while the 24-VSOP package simplifies routing compared with a multi-channel converter. Audio format and clock-mode compatibility remain essential design checks.
추천
Professional Audio Monitoring
AK4121AVF can serve in a professional audio monitoring chain when a converter, workstation, or digital mixer supplies data at a rate that differs from the monitoring DAC clock. The asynchronous architecture allows those domains to operate without a permanent integer ratio, while the supported 8 kHz to 96 kHz range covers many production and playback formats. The single-channel implementation is appropriate for individual monitoring or conversion channels and can simplify system partitioning. For a high-quality implementation, verify the manufacturer's timing, jitter, signal-to-noise, and distortion characteristics under the intended sample rate and loading conditions.
추천
Portable Audio Products
The AK4121AVF is suitable for portable audio designs that must accommodate digital sources operating at different rates, particularly where a codec, wireless audio link, and DAC do not share one continuous master-clock relationship. Its one-channel architecture avoids allocating a multi-channel converter when only a single route needs adaptation, and the 24-VSOP package supports compact surface-mount layouts. The 3 V to 3.6 V supply range aligns with many portable digital subsystems. Battery-powered implementations should still inspect quiescent and active current, clock requirements, and power sequencing in the manufacturer documentation before final platform integration.
추천
엔지니어링 참조 데이터: AK4121AVF — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 24-VSOP |
| Brand | Asahi Kasei Microdevices |
| Device Type | Asynchronous sample rate converter |
| Audio Channel Count | 1 channel |
| Supply Voltage Range | 3 V to 3.6 V |
| Minimum Sampling Frequency | 8 kHz |
| Maximum Sampling Frequency | 96 kHz |
| Mounting Type | Surface mount |
| Component Category | Audio Special Purpose |
주요 차별점
- Asynchronous sample-rate conversion supports unrelated clock domains (vs Fixed-ratio sample rate converter)
- Compact one-channel 24-VSOP implementation (vs Multi-channel audio converter)
- Low-voltage operation for digital audio integration (vs Higher-voltage sample rate converter)
설계 노트
Place the AK4121AVF close to the devices exchanging clock and audio data, and route the critical input and output connections as short as practical. Avoid long traces, unnecessary pads, and branches that could behave as unintended stubs. Define clock and data topology early because moving an asynchronous converter after placement can force rerouting of several timing-sensitive nets. Use the manufacturer's recommended reference layout and external component arrangement as the geometric baseline.
Treat both clock signals and serial audio data as timing-sensitive connections. Maintain the logic levels and edge rates required by the supported interface mode, and keep return paths continuous beneath or adjacent to the routed signals where the board stack-up permits. Do not assume that nominal sample-rate compatibility guarantees correct behavior; asynchronous conversion still requires clean clocks and a valid relationship between the device's modes and external timing.
Operate the supply strictly within the identified 3 V to 3.6 V range and follow the manufacturer recommendation for local bypass capacitors and supply routing. Place the principal decoupling component close to the appropriate supply pin and provide a low-impedance ground return. Verify startup and shutdown sequencing against any host-controlled clocks because enabling the converter before its clock or supply conditions stabilize can produce unreliable interface operation.
Do not select a substitute solely because its description includes sample rate conversion or asynchronous operation. A valid drop-in candidate must match the 24-VSOP footprint and every functional pin, use the same supported supply range, and implement compatible clock modes and audio formats. Obtain the candidate manufacturer datasheet and complete a pin-by-pin comparison before changing the BOM, since an electrically similar converter can still require different routing or firmware.
규정 준수 정보
The available product information does not state compliance or automotive-qualification status for AK4121AVF. Request current manufacturer material and quality declarations for the exact ordering code.