AT91SAM7L64-AU - 36MHz ARM7 MCU, 64KB Flash | Microchip
MPN: AT91SAM7L64-AU ✓ فعالAT91SAM7L64-AU جائزہ
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, digital I/O, timers, serial interfaces, and other peripherals on one integrated circuit. The AT91SAM7L64 combines the 32-bit ARM7TDMI processor architecture with 64 KB of embedded Flash and 6 KB of SRAM. This places it in the ARM microcontroller, embedded controller, and power-management-conscious embedded-device hierarchy.
The principal device characteristics are a 36 MHz operating frequency, 64 KB of Flash memory, and 6 KB of SRAM. The 128-LQFP package exposes 57 I/O lines according to the product listing. The operating supply range is listed as 3 V to 3.6 V, while the associated AT91SAM7L family datasheet describes the low-power SAM7L architecture and its Flash-based implementation.
The ARM7TDMI core supports a 16/32-bit instruction set and provides the processing foundation for control logic, communication management, and state-machine workloads. On-chip Flash supports nonvolatile firmware storage, while the 6 KB SRAM provides working memory for stack operations, buffers, and peripheral data. The large 128-pin package accommodates the device's extensive GPIO and mixed-signal peripheral complement.
Typical uses include industrial automation, communication equipment, data acquisition, embedded control panels, and low-power embedded systems. Its 36 MHz processing rate is suitable for real-time control tasks that do not require the memory capacity or peripheral density of a high-end application processor. The 20 mm by 14 mm LQFP also facilitates inspection and rework after soldering.
Designers should confirm the pin-level power, ground, clock, reset, and peripheral connections in the manufacturer datasheet before layout release. Decoupling, oscillator stability, programming access, unused-pin handling, and mixed-signal partitioning are critical for reliable operation. Because alternate source listings report inconsistent core-voltage descriptions, verify the exact operating conditions for the ordered device revision against the Atmel SAM7L datasheet.
This product page consolidates the verified architectural details, memory configuration, package information, sourcing path, and application-oriented design guidance for engineers evaluating the AT91SAM7L64-AU. It also distinguishes a true pin-to-pin replacement from a merely similar microcontroller, helping prevent incorrect substitutions in an existing 128-LQFP design.
کے لیے ڈراپ اِن متبادل AT91SAM7L64-AU — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںAT91SAM7L64-AU زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | ARM7 16/32-bit Flash Microcontroller |
| Processor Core | ARM7TDMI |
| Maximum Clock Speed | 36 MHz |
| Flash Program Memory | 64 KB (64K x 8) |
| RAM | 6 KB (6K x 8) |
| ڈیٹا بس چوڑائی | 16 bit |
| سپلائی وولٹیج | 3 V to 3.6 V |
| I/O Ports | 57 |
| Package Type | 128-LQFP |
| Package Dimensions | 20 mm x 14 mm |
| Number of Terminals | 128 |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت رینج | -40 °C to +85 °C |
| Temperature Grade | Industrial |
| لائف سائیکل کی حالت | Active |
| Terminal Form | Gull wing |
| Package Code | LFQFP |
AT91SAM7L64-AU lfqfp پن کنفیگریشن گائیڈ
AT91SAM7L64-AU (lfqfp پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AT91SAM7L64-AU.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
AT91SAM7L64-AU کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Controller, Communication Equipment, Data Acquisition System, Embedded Control Panel, Low-Power Embedded System, Programmable Logic Controller.
Industrial Automation Controller
The AT91SAM7L64-AU fits an embedded automation controller that must combine deterministic control logic with a broad set of digital interfaces. Its ARM7TDMI core operates at 36 MHz, providing more instruction throughput than an 8-bit controller while retaining a compact, low-power design profile. The 64 KB of Flash can hold application firmware, while 6 KB of SRAM supports state variables, communication buffers, and interrupt servicing. With 57 I/O ports in a 128-LQFP package, the device can connect sensors, logic-level interfaces, and actuators without an external GPIO expander. The active lifecycle status also supports long-lived industrial equipment, although the -40 °C to +85 °C rating must remain within the enclosure temperature range.
تجویز کردہ
Communication Equipment
The AT91SAM7L64-AU is appropriate for communication equipment where a protocol engine, supervisory controller, and real-time peripheral service share one processor. The 36 MHz ARM7TDMI core can manage framed data and control logic, while 64 KB of Flash stores firmware and 6 KB of SRAM accommodates packet buffers. Its 57 I/O lines provide substantial connectivity for serial links, status indicators, and external hardware control. Because the device has abundant pins in a 128-LQFP package, a board can provide dedicated routing for communications and diagnostics rather than multiplexing those functions through a smaller controller. Firmware should use interrupt-driven transfers and validate protocol timing against the manufacturer peripheral and electrical specifications.
تجویز کردہ
Data Acquisition System
The AT91SAM7L64-AU can serve as the supervisory processor in a low-power data-acquisition system that must collect digital inputs, process measurements, and forward results through a communications interface. The 36 MHz ARM7TDMI processor provides sufficient performance for sampling control, filtering, scaling, and protocol formatting. Its 64 KB of Flash accommodates calibration tables and application firmware, while 6 KB of RAM can hold active samples and communication data. The 57 available I/O lines simplify connection to sensor-conditioning, multiplexing, and status circuitry. Designers should partition analog and digital sections carefully, provide stable references, and confirm acquisition peripheral characteristics in the Atmel SAM7L datasheet before fixing the channel architecture.
تجویز کردہ
Embedded Control Panel
The AT91SAM7L64-AU is suitable for an embedded control panel that coordinates user inputs, indicators, communications, and machine-control logic in one processor. Its 36 MHz ARM7TDMI core can execute a responsive control application, and its 64 KB Flash provides practical space for firmware, interface logic, and configuration data. The 6 KB SRAM supports event handling and display or communications buffers without requiring external memory. With 57 I/O ports in a 128-LQFP package, the design has ample connections for keys, alarm outputs, and external control lines. The industrial temperature grade of -40 °C to +85 °C supports controlled indoor and industrial enclosures, but enclosure temperature and power-supply tolerances still require validation.
تجویز کردہ
Low-Power Embedded System
The AT91SAM7L64-AU is well matched to compact embedded systems that need more processing capability than an 8-bit MCU without adopting a high-performance application processor. Its ARM7TDMI core runs at 36 MHz, while the SAM7L family's low-power design emphasis supports resource-conscious embedded products. The 64 KB Flash stores firmware without an external memory device, and 6 KB of SRAM handles working state. Its 128-LQFP package is relatively large for a low-power system, so board-area optimization must be balanced against the availability of 57 I/O ports. Confirm sleep-mode behavior, wake-up sources, and clock-tree configuration in the manufacturer datasheet for each operating mode.
تجویز کردہ
Programmable Logic Controller
The AT91SAM7L64-AU can implement a compact programmable logic controller for equipment requiring deterministic digital I/O, event handling, and local communications. The 36 MHz processor provides performance for scanning inputs, executing control rules, updating outputs, and maintaining communications concurrently. Its 57 I/O ports map well to discrete sensors, interlocks, and actuator outputs, while 64 KB of Flash provides room for application code and 6 KB of SRAM supports scan and diagnostic data. The industrial -40 °C to +85 °C temperature grade is appropriate for typical controlled machinery environments. For safety-related functions, the MCU should not be treated as independently certified; the complete machine-control system requires the appropriate functional-safety assessment and hardware safeguards.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا AT91SAM7L64-AU — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Brand | Microchip Technology |
| Package | 128-LQFP (20 mm x 14 mm) |
| Processor Core | ARM7TDMI |
| Maximum Clock Speed | 36 MHz |
| Flash Program Memory | 64 KB (64K x 8) |
| RAM | 6 KB (6K x 8) |
| Data Bus Width | 16 bit |
| Supply Voltage | 3 V to 3.6 V |
| I/O Ports | 57 |
| Operating Temperature Range | -40 °C to +85 °C |
اہم امتیازی خصوصیات
- Defined 64 KB Flash configuration (بمقابلہAT91SAM7L128)
- Compact 6 KB working-memory configuration (بمقابلہAT91SAM7L128)
- Broad digital I/O availability (بمقابلہAT91SAM7L128)
ڈیزائن نوٹس
Confirm every supply-domain requirement against the manufacturer electrical-characteristics table before assigning the 3 V to 3.6 V operating range to all pins. Related listings describe different core or internal voltage values, so a board-level design should not combine those figures without checking the selected device revision. Place local bypass capacitors close to the supply and ground terminals, follow the datasheet's capacitance and ESR requirements, and provide clean return paths for switching peripherals.
Design the 128-LQFP footprint from the package drawing rather than relying only on the 20 mm by 14 mm body dimension. Include the correct lead pitch, lead span, courtyard, solder-mask clearance, and paste pattern. Because the device exposes 57 I/O ports, separate analog-sensitive, high-speed, and power-related routing where practical, and route clock signals away from switching nodes to reduce coupling into the 36 MHz processing system.
Assign oscillator, reset, programming, and debug access early in the PCB layout because these functions affect placement and routing. Keep the oscillator loop compact and grounded, route reset with appropriate noise immunity, and maintain accessible programming pads if in-circuit programming is required. Review unused-pin treatment and no-connect requirements in the Atmel SAM7L pin-description table before releasing the schematic.
Do not treat AT91SAM7L128, AT91SAM7X512, STM32, or other similar microcontrollers as automatic replacements for this design. The higher-memory SAM7 devices change the available Flash capacity, while cross-brand ARM devices may change pin functions, peripherals, startup behavior, and software dependencies. A genuine drop-in replacement must match the 128-LQFP land pattern, power requirements, clock architecture, reset behavior, and application firmware expectations.
تعمیل کی معلومات
The listed operating temperature grade is industrial, with a range of -40 °C to +85 °C. No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is present for the exact MPN.