Microchip Technology

AT91SAM7L64-AU - 36MHz ARM7 MCU, 64KB Flash | Microchip

Référence : AT91SAM7L64-AU ✓ Actif
3 V to 3.6 V Vdss 128-LQFP Package 36 MHz Speed 64 KB (64K x 8) Memory
MOQ : 1 |

AT91SAM7L64-AU Présentation

The Microchip AT91SAM7L64-AU is a 36 MHz ARM7-based 16/32-bit microcontroller with 64 KB of Flash program memory, 6 KB of SRAM, and a 128-pin LQFP package measuring 20 mm by 14 mm. The device belongs to the SAM7L family and combines a low-power RISC core with integrated microcontroller peripherals for embedded control applications.

A microcontroller is a programmable semiconductor device that integrates a processor core, memory, digital I/O, timers, serial interfaces, and other peripherals on one integrated circuit. The AT91SAM7L64 combines the 32-bit ARM7TDMI processor architecture with 64 KB of embedded Flash and 6 KB of SRAM. This places it in the ARM microcontroller, embedded controller, and power-management-conscious embedded-device hierarchy.

The principal device characteristics are a 36 MHz operating frequency, 64 KB of Flash memory, and 6 KB of SRAM. The 128-LQFP package exposes 57 I/O lines according to the product listing. The operating supply range is listed as 3 V to 3.6 V, while the associated AT91SAM7L family datasheet describes the low-power SAM7L architecture and its Flash-based implementation.

The ARM7TDMI core supports a 16/32-bit instruction set and provides the processing foundation for control logic, communication management, and state-machine workloads. On-chip Flash supports nonvolatile firmware storage, while the 6 KB SRAM provides working memory for stack operations, buffers, and peripheral data. The large 128-pin package accommodates the device's extensive GPIO and mixed-signal peripheral complement.

Typical uses include industrial automation, communication equipment, data acquisition, embedded control panels, and low-power embedded systems. Its 36 MHz processing rate is suitable for real-time control tasks that do not require the memory capacity or peripheral density of a high-end application processor. The 20 mm by 14 mm LQFP also facilitates inspection and rework after soldering.

Designers should confirm the pin-level power, ground, clock, reset, and peripheral connections in the manufacturer datasheet before layout release. Decoupling, oscillator stability, programming access, unused-pin handling, and mixed-signal partitioning are critical for reliable operation. Because alternate source listings report inconsistent core-voltage descriptions, verify the exact operating conditions for the ordered device revision against the Atmel SAM7L datasheet.

This product page consolidates the verified architectural details, memory configuration, package information, sourcing path, and application-oriented design guidance for engineers evaluating the AT91SAM7L64-AU. It also distinguishes a true pin-to-pin replacement from a merely similar microcontroller, helping prevent incorrect substitutions in an existing 128-LQFP design.

Alternatives de remplacement direct pour AT91SAM7L64-AU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

AT91SAM7L64-AU Valeurs maximales et caractéristiques électriques

Product Type ARM7 16/32-bit Flash Microcontroller
Processor Core ARM7TDMI
Maximum Clock Speed 36 MHz
Flash Program Memory 64 KB (64K x 8)
RAM 6 KB (6K x 8)
Largeur du bus de données 16 bit
Tension d'alimentation 3 V to 3.6 V
I/O Ports 57
Package Type 128-LQFP
Package Dimensions 20 mm x 14 mm
Number of Terminals 128
Type de montage Surface Mount
Plage de température de fonctionnement -40 °C to +85 °C
Temperature Grade Industrial
Statut du cycle de vie Active
Terminal Form Gull wing
Package Code LFQFP

Guide de configuration des broches du AT91SAM7L64-AU lfqfp

Configuration des broches du AT91SAM7L64-AU (boîtier lfqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier lfqfp pour le AT91SAM7L64-AU

Aucune donnée de brochage détaillée disponible pour AT91SAM7L64-AU.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

AT91SAM7L64-AU convient pour 6 applications: Industrial Automation Controller, Communication Equipment, Data Acquisition System, Embedded Control Panel, Low-Power Embedded System, Programmable Logic Controller.

🏭

Industrial Automation Controller

The AT91SAM7L64-AU fits an embedded automation controller that must combine deterministic control logic with a broad set of digital interfaces. Its ARM7TDMI core operates at 36 MHz, providing more instruction throughput than an 8-bit controller while retaining a compact, low-power design profile. The 64 KB of Flash can hold application firmware, while 6 KB of SRAM supports state variables, communication buffers, and interrupt servicing. With 57 I/O ports in a 128-LQFP package, the device can connect sensors, logic-level interfaces, and actuators without an external GPIO expander. The active lifecycle status also supports long-lived industrial equipment, although the -40 °C to +85 °C rating must remain within the enclosure temperature range.

🌐

Communication Equipment

The AT91SAM7L64-AU is appropriate for communication equipment where a protocol engine, supervisory controller, and real-time peripheral service share one processor. The 36 MHz ARM7TDMI core can manage framed data and control logic, while 64 KB of Flash stores firmware and 6 KB of SRAM accommodates packet buffers. Its 57 I/O lines provide substantial connectivity for serial links, status indicators, and external hardware control. Because the device has abundant pins in a 128-LQFP package, a board can provide dedicated routing for communications and diagnostics rather than multiplexing those functions through a smaller controller. Firmware should use interrupt-driven transfers and validate protocol timing against the manufacturer peripheral and electrical specifications.

📟

Data Acquisition System

The AT91SAM7L64-AU can serve as the supervisory processor in a low-power data-acquisition system that must collect digital inputs, process measurements, and forward results through a communications interface. The 36 MHz ARM7TDMI processor provides sufficient performance for sampling control, filtering, scaling, and protocol formatting. Its 64 KB of Flash accommodates calibration tables and application firmware, while 6 KB of RAM can hold active samples and communication data. The 57 available I/O lines simplify connection to sensor-conditioning, multiplexing, and status circuitry. Designers should partition analog and digital sections carefully, provide stable references, and confirm acquisition peripheral characteristics in the Atmel SAM7L datasheet before fixing the channel architecture.

🔧

Embedded Control Panel

The AT91SAM7L64-AU is suitable for an embedded control panel that coordinates user inputs, indicators, communications, and machine-control logic in one processor. Its 36 MHz ARM7TDMI core can execute a responsive control application, and its 64 KB Flash provides practical space for firmware, interface logic, and configuration data. The 6 KB SRAM supports event handling and display or communications buffers without requiring external memory. With 57 I/O ports in a 128-LQFP package, the design has ample connections for keys, alarm outputs, and external control lines. The industrial temperature grade of -40 °C to +85 °C supports controlled indoor and industrial enclosures, but enclosure temperature and power-supply tolerances still require validation.

🧩

Low-Power Embedded System

The AT91SAM7L64-AU is well matched to compact embedded systems that need more processing capability than an 8-bit MCU without adopting a high-performance application processor. Its ARM7TDMI core runs at 36 MHz, while the SAM7L family's low-power design emphasis supports resource-conscious embedded products. The 64 KB Flash stores firmware without an external memory device, and 6 KB of SRAM handles working state. Its 128-LQFP package is relatively large for a low-power system, so board-area optimization must be balanced against the availability of 57 I/O ports. Confirm sleep-mode behavior, wake-up sources, and clock-tree configuration in the manufacturer datasheet for each operating mode.

⚙️

Programmable Logic Controller

The AT91SAM7L64-AU can implement a compact programmable logic controller for equipment requiring deterministic digital I/O, event handling, and local communications. The 36 MHz processor provides performance for scanning inputs, executing control rules, updating outputs, and maintaining communications concurrently. Its 57 I/O ports map well to discrete sensors, interlocks, and actuator outputs, while 64 KB of Flash provides room for application code and 6 KB of SRAM supports scan and diagnostic data. The industrial -40 °C to +85 °C temperature grade is appropriate for typical controlled machinery environments. For safety-related functions, the MCU should not be treated as independently certified; the complete machine-control system requires the appropriate functional-safety assessment and hardware safeguards.

Récapitulatif des produits recommandés

AT91SAM7L64-AU Microchip Technology Utilisé dans : Industrial Automation Controller, Communication Equipment, Data Acquisition System, Embedded Control Panel, Low-Power Embedded System, Programmable Logic Controller AT91SAM7L128 Higher-memory member of the SAM7L family Utilisé dans : Industrial Automation Controller, Communication Equipment, Data Acquisition System, Embedded Control Panel, Low-Power Embedded System, Programmable Logic Controller
What are the key specifications of AT91SAM7L64-AU that engineers should know?
The AT91SAM7L64-AU is a 36 MHz ARM7TDMI microcontroller with 64 KB of Flash memory, 6 KB of SRAM, 57 I/O ports, and a 128-pin LQFP package measuring 20 mm by 14 mm. According to the Atmel SAM7L datasheet, the part is a low-power member of the Smart ARM Microcontroller family. Its combination of 16/32-bit processing, on-chip nonvolatile memory, and a high pin count supports embedded control, communications, and data-acquisition designs.
What is the operating voltage of AT91SAM7L64-AU?
The listed operating supply voltage for the AT91SAM7L64-AU is 3 V to 3.6 V. The Atmel SAM7L family datasheet describes the device as a low-power ARM7TDMI microcontroller, while the product listing provides the 3 V to 3.6 V range. Before power-supply design, check the electrical characteristics and core-IO voltage conditions in the manufacturer datasheet because related listings describe different internal or core-voltage values.
How much memory does AT91SAM7L64-AU have?
The AT91SAM7L64-AU provides 64 KB, organized as 64K x 8, of Flash program memory and 6 KB, organized as 6K x 8, of RAM. According to the Atmel SAM7L datasheet, Flash supports nonvolatile firmware storage, while SRAM supplies working memory for code execution, stack operations, and peripheral buffering. Design firmware and memory maps around these two distinct on-chip memory resources.
What package does AT91SAM7L64-AU use?
The AT91SAM7L64-AU is supplied in a 128-pin LQFP package measuring 20 mm by 14 mm. Product records identify the package code as LFQFP and describe gull-wing surface-mount terminals. The package has 128 terminals and supports 57 I/O ports, making it materially larger and more pin-dense than a small 32- or 64-pin microcontroller package.
Where can I download the AT91SAM7L64-AU datasheet PDF?
The AT91SAM7L64-AU datasheet PDF is available from Microchip at the manufacturer document link published for the Atmel ARM7TDMI SAM7L family. The document covers the AT91SAM7L128 and AT91SAM7L64 low-power Smart ARM Microcontrollers. Use its package, pin-description, electrical-characteristics, and clock sections as the controlling references for a new design.
Where can I find the AT91SAM7L64-AU pinout?
The authoritative AT91SAM7L64-AU pinout is the package-pin description in the Atmel SAM7L family datasheet, available through the Microchip document link on this page. The device uses a 128-LQFP package, so the layout must accommodate all 128 terminal positions and the exposed-pin assignments. Do not infer pin functions from similarly named SAM7 devices because memory and peripheral options can differ.
What is the AT91SAM7L64-AU clock speed and core architecture?
The AT91SAM7L64-AU operates at up to 36 MHz and uses an ARM7TDMI processor core. The Atmel SAM7L datasheet identifies a 32-bit ARM7TDMI RISC processor within a device that also supports 16-bit operations. This core provides a straightforward embedded-control architecture and integrates with the on-chip Flash, SRAM, interrupt system, and communication peripherals.
Is AT91SAM7L64-AU suitable for industrial embedded control?
The AT91SAM7L64-AU is suitable for many industrial embedded-control tasks because it combines a 36 MHz ARM7TDMI core, 64 KB of Flash, 6 KB of SRAM, 57 I/O ports, and an industrial temperature grade of -40 °C to +85 °C. According to the product listing, the lifecycle stage is active. Confirm individual peripheral ratings, isolation requirements, and system-level qualification before using the MCU as a safety component.
Where can I buy AT91SAM7L64-AU online?
The AT91SAM7L64-AU can be requested through the Request a Quote form on this page for current commercial availability, lead time, and order handling. The product is listed as active, and multiple distribution records identify the same 36 MHz, 64 KB Flash, 128-LQFP device. Submit the exact MPN to avoid confusing it with other SAM7 memory-density or package variants.
What is the price of AT91SAM7L64-AU?
Current pricing for the AT91SAM7L64-AU should be obtained through the Request a Quote form on this page. The available records do not present a qualifying quantity-break table for the exact MPN, so no static price figure is reproduced here. The request form is the appropriate route for a quotation tied to quantity, packaging, delivery location, and current availability.
What is the lead time for AT91SAM7L64-AU?
The current lead time for AT91SAM7L64-AU should be confirmed through the Request a Quote form on this page. One product record describes an estimated delivery window, but its stock figure is presented as a reference and its delivery dates are not a manufacturer schedule. For production planning, request a quantity-specific commitment covering allocation, packaging, and shipment.
Is AT91SAM7L64-AU in stock?
AT91SAM7L64-AU is listed as active, but current stock should be checked through the Request a Quote form on this page. Multiple product records show the component and its 128-LQFP configuration, yet those records do not establish a uniform, current inventory position. A quotation response can confirm available quantity and the requested delivery schedule for your specific order.
What can replace AT91SAM7L64-AU?
No verified drop-in replacement for the AT91SAM7L64-AU was established in the available cross-reference data. The 128-LQFP package, 36 MHz core, 64 KB Flash, 6 KB SRAM, peripheral set, and software behavior must all match before a replacement can be called drop-in. Similar ARM microcontrollers or higher-memory SAM7 variants may require board, firmware, or peripheral changes and should not be treated as automatic substitutes.
AT91SAM7L64-AU vs AT91SAM7L128-AU: which is better for an embedded design?
The AT91SAM7L64-AU is preferable when 64 KB of Flash and 6 KB of SRAM are sufficient, while the AT91SAM7L128-AU offers a larger Flash option within the SAM7L family. Although related devices can use the same broad package family, the 64 KB versus 128 KB Flash difference is 100%, so the higher-memory device is not a parameter-matched drop-in alternative. Confirm pin assignments and firmware requirements before choosing it.
Is AT91SAM7L64-AU the same as an STM32 or other ARM7-compatible MCU?
The AT91SAM7L64-AU is not automatically interchangeable with an STM32 or another ARM microcontroller. The verified comparison record describes the AT91SAM7L64-AU as a 32-bit ARM7 device with 64 KB Flash in a 128-LQFP package, but it does not establish a pin-to-pin match. Peripheral mapping, power architecture, clocking, startup behavior, and software support must be reviewed before any cross-brand substitution.

Données de référence d'ingénierie pour AT91SAM7L64-AU — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the AT91SAM7L64-AU when a design requires a 36 MHz ARM7TDMI controller with exactly 64 KB of Flash, 6 KB of SRAM, and 57 I/O ports in a 128-LQFP package. It is well suited to industrial controllers, communication equipment, programmable logic, and data-acquisition products where an active, industrial-grade ARM7 MCU is appropriate. Select a higher-memory SAM7L variant only after confirming that its Flash capacity, firmware organization, pin assignments, and electrical behavior satisfy the product design. Cross-brand ARM microcontrollers may offer different processing efficiency, low-power features, or ecosystem advantages, but they are not drop-in choices without a complete footprint, peripheral, timing, boot, and software review. For an existing AT91SAM7L64-AU board, the safest replacement strategy is an exact manufacturer-supported match rather than a merely similar 128-pin MCU.

Comparaison avec les alternatives

Paramètre Ce produit
Brand Microchip Technology
Package 128-LQFP (20 mm x 14 mm)
Processor Core ARM7TDMI
Maximum Clock Speed 36 MHz
Flash Program Memory 64 KB (64K x 8)
RAM 6 KB (6K x 8)
Data Bus Width 16 bit
Supply Voltage 3 V to 3.6 V
I/O Ports 57
Operating Temperature Range -40 °C to +85 °C

Principaux différenciateurs

  • Defined 64 KB Flash configuration (vs AT91SAM7L128)
  • Compact 6 KB working-memory configuration (vs AT91SAM7L128)
  • Broad digital I/O availability (vs AT91SAM7L128)

Notes de conception

Confirm every supply-domain requirement against the manufacturer electrical-characteristics table before assigning the 3 V to 3.6 V operating range to all pins. Related listings describe different core or internal voltage values, so a board-level design should not combine those figures without checking the selected device revision. Place local bypass capacitors close to the supply and ground terminals, follow the datasheet's capacitance and ESR requirements, and provide clean return paths for switching peripherals.

Design the 128-LQFP footprint from the package drawing rather than relying only on the 20 mm by 14 mm body dimension. Include the correct lead pitch, lead span, courtyard, solder-mask clearance, and paste pattern. Because the device exposes 57 I/O ports, separate analog-sensitive, high-speed, and power-related routing where practical, and route clock signals away from switching nodes to reduce coupling into the 36 MHz processing system.

Assign oscillator, reset, programming, and debug access early in the PCB layout because these functions affect placement and routing. Keep the oscillator loop compact and grounded, route reset with appropriate noise immunity, and maintain accessible programming pads if in-circuit programming is required. Review unused-pin treatment and no-connect requirements in the Atmel SAM7L pin-description table before releasing the schematic.

Do not treat AT91SAM7L128, AT91SAM7X512, STM32, or other similar microcontrollers as automatic replacements for this design. The higher-memory SAM7 devices change the available Flash capacity, while cross-brand ARM devices may change pin functions, peripherals, startup behavior, and software dependencies. A genuine drop-in replacement must match the 128-LQFP land pattern, power requirements, clock architecture, reset behavior, and application firmware expectations.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The listed operating temperature grade is industrial, with a range of -40 °C to +85 °C. No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is present for the exact MPN.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

AT91SAM7L64-AU datasheet AT91SAM7L64-AU specifications AT91SAM7L64-AU pinout AT91SAM7L64-AU datasheet pdf AT91SAM7L64 128-LQFP AT91SAM7L64-AU equivalent AT91SAM7L64-AU replacement AT91SAM7L64-AU cross reference AT91SAM7L64-AU price AT91SAM7L64-AU stock Microchip AT91SAM7L64-AU AT91SAM7L64-AU 36MHz ARM7 AT91SAM7L64-AU 64KB Flash AT91SAM7L64-AU vs AT91SAM7L128 AT91SAM7L64 application circuit

Composants & termes associés

Microchip Technology Atmel AT91SAM7L64-AU AT91SAM7L64 AT91SAM7L128 ARM7TDMI ARM7 16/32-bit microcontroller embedded microcontroller RISC processor Flash program memory SRAM 36 MHz 64 KB Flash 6 KB SRAM 57 I/O ports 128-LQFP LQFP 20 mm by 14 mm package surface mount industrial temperature grade industrial automation data acquisition programmable logic controller low-power embedded system
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ