ATF22LV10C-10JC - 10ns 500-Gate CMOS PLD | Microchip Technology
MPN: ATF22LV10C-10JC ✓ فعالATF22LV10C-10JC جائزہ
A simple programmable logic device, or SPLD, is a user-programmable semiconductor that combines AND, OR, and related logic functions into one configurable integrated circuit. Within the programmable-logic hierarchy, the ATF22V10C belongs to the SPLD family and then to the broader PLD and programmable-logic-device categories. Its primary engineering advantage is consolidated glue logic: several combinational or registered functions can be implemented in one device rather than across multiple separate gate ICs.
Key features include 10 macrocells, a maximum speed grade of 10 ns, operation from 3.0 V to 5.5 V, and electrically erasable flash configuration memory. The macrocell architecture supports programmable product terms and configurable output polarity. A user-controlled power-down function can reduce standby current to 10 uA typical, making the device useful when system power management and reliability are more important than maximum operating speed.
The ATF22LV10C uses CMOS processing and provides a simple alternative to mask-programmed logic, field-programmable gate arrays, and discrete gate packages. Programming support allows the design to be changed during development or service without replacing a permanently programmed mask. The 28-pin PLCC footprint is a surface-mount package measuring 11.51 mm by 11.51 mm according to the product listing. Pin and function assignments should be checked against the manufacturer package drawing before layout or replacement.
Typical applications include industrial control interfaces, address decoding, command multiplexing, data-routing logic, and compact embedded control blocks. It is especially suitable for designs requiring retained configuration, low voltage operation, and a modest logic-density requirement. The 10 ns speed grade also provides useful timing margin for common control, interface, and bus-logic functions when operated within the specified voltage and temperature limits.
The primary design consideration is confirming that the 3.3 V ATF22LV10C family matches the voltage requirements of the surrounding logic. Do not substitute the 5 V ATF22V10C family without reviewing every supply and signal level. Preserve the power-down feature only where its state during reset and normal operation is correctly defined, because an incorrectly controlled PD input can interrupt operation.
This product overview combines electrical characteristics, package information, application guidance, and a drop-in comparison of compatible ATF22LV10C speed and temperature grades. Use the manufacturer datasheet pin-description and package tables to assign tracks, validate programming settings, and confirm absolute operating limits.
کے لیے ڈراپ اِن متبادل ATF22LV10C-10JC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATF22LV10C-10JC (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Architecture, Device Family, Package, Product Type, Propagation Delay.
ATF22LV10C-10JI
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATF22LV10C-10JU
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATF22LV10CZ-25JI
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATF22LV10C-10JC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Simple programmable logic device (SPLD) |
| Architecture | CMOS electrically erasable flash programmable logic |
| Number of Macrocells | 10 macrocells |
| Equivalent Logic Capacity | 500 gates |
| Processing Speed | 10 ns |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Power-Down Standby Current | 10 uA typical |
| Power Dissipation | 10 mA |
| Configuration Memory | Electrically erasable flash memory |
| پیکیج | 28-pin PLCC |
| Package Dimensions | 11.51 mm x 11.51 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| Device Family | ATF22V10C |
ATF22LV10C-10JC 11.51 mm x 11.51 mm پن کنفیگریشن گائیڈ
ATF22LV10C-10JC (11.51 mm x 11.51 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATF22LV10C-10JC.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ATF22LV10C-10JC کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Address Decoding, Embedded Command Multiplexing, Data Routing and Signal Conditioning, Low-Power Instrumentation Control, Legacy System Logic Consolidation, Embedded Control Interface Logic.
Industrial Address Decoding
The ATF22LV10C-10JC is suitable for address decoding in industrial control boards where several command and interrupt signals must be generated from a small number of digital inputs. Its 10 macrocells and 500-gate capacity can consolidate decode equations that would otherwise occupy multiple discrete gate packages. The 10 ns speed grade provides useful timing margin for common control buses, while flash configuration preserves the logic pattern between power cycles. Designers should allocate macrocell product terms carefully and verify output polarity and registered-output requirements against the manufacturer programming guidance.
تجویز کردہ
Embedded Command Multiplexing
The ATF22LV10C-10JC can implement command multiplexing and signal routing between embedded processors, memory devices, and peripheral controllers. Its electrically erasable flash configuration allows firmware engineers to modify the routing table without a mask change, while the 10-macrocell structure is appropriate for moderate control paths. A 10 ns device can also meet common peripheral-interface timing when external pull-ups, bus capacitance, and propagation-delay skew are included in the timing budget. Validate every configured pin against the JEDEC-compatible PLCC pinout before fabrication.
تجویز کردہ
Data Routing and Signal Conditioning
The ATF22LV10C-10JC is useful for compact data-routing, parity, gating, and signal-conditioning functions placed between larger digital systems. Its 500-gate equivalent capacity can replace groups of small gate ICs while reducing package count and interconnect complexity. The 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V system variants, provided every connected device uses compatible logic levels. Because programmable outputs can introduce different delays, analyze critical paths and use the manufacturer timing characteristics to confirm setup and hold margins.
تجویز کردہ
Low-Power Instrumentation Control
The ATF22LV10C-10JC fits low-power instrumentation that combines retained control logic with an explicit standby mode. Activating the user-controlled power-down feature can reduce standby current to 10 uA typical according to the Microchip Technology datasheet, helping manage total system power in intermittently operated equipment. Flash configuration avoids volatile power loss and allows controlled logic revisions. The control system must ensure that the PLCC PD pin remains inactive during measurement and reset sequences, since premature assertion would stop normal device operation.
تجویز کردہ
Legacy System Logic Consolidation
The ATF22LV10C-10JC can simplify modernization of older control systems that combine discrete gates, counters, and address-decoding logic. A Microchip Technology application note identifies the ATF22LV10C family as a JEDEC-compatible replacement for the Xilinx XCR22LV10, providing a migration route when the legacy device is unavailable. Because the ATF22LV10C uses flash configuration rather than the original technology, engineers should validate the programming file, pin functions, timing, and power behavior rather than relying only on package similarity.
تجویز کردہ
Embedded Control Interface Logic
The ATF22LV10C-10JC is appropriate for small embedded interface blocks that translate enables, status flags, and fault signals between subsystems. Ten macrocells provide enough capacity for several Boolean relationships without introducing a larger FPGA or CPLD footprint. The 10 ns grade supports many control-oriented paths, while electrically erasable flash retains the configuration during maintenance and field updates. Engineers should reserve unused pins correctly, account for program or test modes in the board controller, and confirm that every output remains within the applicable supply and temperature limits.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ATF22LV10C-10JC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ATF22LV10C-10JI | ATF22LV10C-10JU | ATF22LV10CZ-25JI |
|---|---|---|---|---|
| Package | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | ATF22LV10C SPLD | ATF22LV10C SPLD | ATF22LV10C SPLD | ATF22LV10CZ SPLD |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Logic Capacity | 500 gates | 500 gates | 500 gates | 500 gates |
| Processing Speed | 10 ns | 10 ns | 10 ns | 25 ns |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Configuration Memory | Electrically erasable flash | Electrically erasable flash | Electrically erasable flash | Electrically erasable flash |
اہم امتیازی خصوصیات
- Faster processing grade (بمقابلہATF22LV10CZ-25JI)
- Explicit industrial-temperature ordering option (بمقابلہATF22LV10C-10JU)
- Matches the 10 ns family performance target (بمقابلہATF22LV10CZ-25JI)
ڈیزائن نوٹس
Confirm the complete ATF22LV10C supply range of 3.0 V to 5.5 V against every connected input, output, and programming signal before layout release. The ATF22V10C family is intended for 5 V systems, while the ATF22LV10C family serves lower-voltage designs; do not treat their otherwise similar PLCC pinouts as interchangeable without reviewing the electrical specifications.
Use the 28-pin PLCC land pattern and pin-description table from the official ATF22LV10C documentation. Keep the programming interface and power-down control accessible to the board programmer, and account for all PLCC pins rather than assuming unused I/O locations. Mechanical courtyard clearance should also allow for the 11.51 mm by 11.51 mm package body and lead geometry.
The PD function reduces standby current to 10 uA typical, but an unintended PD assertion can stop the device from operating. Define the PD state during reset, programming, and normal operation, and add a deterministic pull resistor where appropriate. When upgrading from ATF22V10C, verify that voltage levels and the complete ordering suffix remain valid rather than relying only on package fit.
Analyze configured output paths as individual timing channels because product-term and routing delays can vary. For the 10 ns grade, include external pull-up resistance, bus capacitance, and clock or enable skew when checking setup and hold margins. For the ATF22LV10CZ-25JI alternative, its 25 ns speed grade adds 15 ns of nominal delay relative to the ATF22LV10C-10JC and may not meet the same critical path.
تعمیل کی معلومات
No explicit environmental or material-compliance declarations are included in the cited manufacturer product materials.