Microchip Technology

ATF22LV10C-10JC - 10ns 500-Gate CMOS PLD | Microchip Technology

Артикул: ATF22LV10C-10JC ✓ Активен
3.0 V to 5.5 V Vdss 10 uA typical Id 28-pin PLCC Package 10 ns Speed Electrically erasable flash memory Memory
MOQ: 1 |

ATF22LV10C-10JC Обзор

The Microchip Technology ATF22LV10C-10JC is a high-performance CMOS programmable logic device with 10 macrocells, approximately 500 gates, and a 10 ns processing speed in a 28-pin PLCC package. It operates across a 3.0 V to 5.5 V supply range and stores its configuration in electrically erasable flash memory, allowing the programmed logic to be retained without a separate external memory device. The ATF22LV10C-10JC is a low-voltage member of the ATF22V10C family.

A simple programmable logic device, or SPLD, is a user-programmable semiconductor that combines AND, OR, and related logic functions into one configurable integrated circuit. Within the programmable-logic hierarchy, the ATF22V10C belongs to the SPLD family and then to the broader PLD and programmable-logic-device categories. Its primary engineering advantage is consolidated glue logic: several combinational or registered functions can be implemented in one device rather than across multiple separate gate ICs.

Key features include 10 macrocells, a maximum speed grade of 10 ns, operation from 3.0 V to 5.5 V, and electrically erasable flash configuration memory. The macrocell architecture supports programmable product terms and configurable output polarity. A user-controlled power-down function can reduce standby current to 10 uA typical, making the device useful when system power management and reliability are more important than maximum operating speed.

The ATF22LV10C uses CMOS processing and provides a simple alternative to mask-programmed logic, field-programmable gate arrays, and discrete gate packages. Programming support allows the design to be changed during development or service without replacing a permanently programmed mask. The 28-pin PLCC footprint is a surface-mount package measuring 11.51 mm by 11.51 mm according to the product listing. Pin and function assignments should be checked against the manufacturer package drawing before layout or replacement.

Typical applications include industrial control interfaces, address decoding, command multiplexing, data-routing logic, and compact embedded control blocks. It is especially suitable for designs requiring retained configuration, low voltage operation, and a modest logic-density requirement. The 10 ns speed grade also provides useful timing margin for common control, interface, and bus-logic functions when operated within the specified voltage and temperature limits.

The primary design consideration is confirming that the 3.3 V ATF22LV10C family matches the voltage requirements of the surrounding logic. Do not substitute the 5 V ATF22V10C family without reviewing every supply and signal level. Preserve the power-down feature only where its state during reset and normal operation is correctly defined, because an incorrectly controlled PD input can interrupt operation.

This product overview combines electrical characteristics, package information, application guidance, and a drop-in comparison of compatible ATF22LV10C speed and temperature grades. Use the manufacturer datasheet pin-description and package tables to assign tracks, validate programming settings, and confirm absolute operating limits.

Аналоги без доработки для ATF22LV10C-10JC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ATF22LV10C-10JC (тот же форм-фактор и посадочное место) — отличается по Architecture, Device Family, Package, Product Type, Propagation Delay.

Microchip Technology
Package: 28-pin PLCC, J-lead surface mount
Product Type: Low-voltage electrically erasable programmable logic device
Propagation Delay: 10 ns
Сравнить с ATF22LV10C-10JC →
Microchip Technology
Architecture: High-performance CMOS programmable logic device
Device Family: ATF22LV10C
Propagation Delay: 25 ns
Сравнить с ATF22LV10C-10JC →

ATF22LV10C-10JI

✅ Прямая замена
📦 28-PLCC (11.51 mm x 11.51 mm)
Same 10 ns speed grade, 10 macrocells, and 500-gate capacity; the -10JI ordering suffix designates a different temperature grade.

📋 Справочный аналог (нет в каталоге)

ATF22LV10C-10JU

✅ Прямая замена
Microchip Technology
📦 28-PLCC (11.51 mm x 11.51 mm)
Low-voltage electrically erasable programmable logic device · 10 macrocells · 500 gates · 10 ns · 83.3 MHz · 3.0 V to 5.5 V · 3.3 V or 5 V · 10 uA typical

Уточнить цену

Открыть даташит →

ATF22LV10CZ-25JI

✅ Прямая замена
Microchip Technology
📦 28-PLCC (11.51 mm x 11.51 mm)
Electrically Erasable Programmable Logic Device (EEPLD) · ATF22LV10C · 10 macrocells · 500 gates · 25 ns · 3.0 V to 5.5 V · 3.3 V and 5 V · Electrically erasable flash memory

Уточнить цену

Открыть даташит →

ATF22LV10C-10JC Максимальные параметры и электрические характеристики

Product Type Simple programmable logic device (SPLD)
Architecture CMOS electrically erasable flash programmable logic
Number of Macrocells 10 macrocells
Equivalent Logic Capacity 500 gates
Processing Speed 10 ns
Supply Voltage Range 3.0 V to 5.5 V
Power-Down Standby Current 10 uA typical
Power Dissipation 10 mA
Configuration Memory Electrically erasable flash memory
Корпус 28-pin PLCC
Package Dimensions 11.51 mm x 11.51 mm
Тип монтажа Surface mount
Device Family ATF22V10C

Руководство по цоколевке ATF22LV10C-10JC в корпусе 11.51 mm x 11.51 mm

Цоколевка для ATF22LV10C-10JC (корпус 11.51 mm x 11.51 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 11.51 mm x 11.51 mm для ATF22LV10C-10JC

Нет подробных данных о распиновке для ATF22LV10C-10JC.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATF22LV10C-10JC подходит для 6 применениеs: Industrial Address Decoding, Embedded Command Multiplexing, Data Routing and Signal Conditioning, Low-Power Instrumentation Control, Legacy System Logic Consolidation, Embedded Control Interface Logic.

🏭

Industrial Address Decoding

The ATF22LV10C-10JC is suitable for address decoding in industrial control boards where several command and interrupt signals must be generated from a small number of digital inputs. Its 10 macrocells and 500-gate capacity can consolidate decode equations that would otherwise occupy multiple discrete gate packages. The 10 ns speed grade provides useful timing margin for common control buses, while flash configuration preserves the logic pattern between power cycles. Designers should allocate macrocell product terms carefully and verify output polarity and registered-output requirements against the manufacturer programming guidance.

🔧

Embedded Command Multiplexing

The ATF22LV10C-10JC can implement command multiplexing and signal routing between embedded processors, memory devices, and peripheral controllers. Its electrically erasable flash configuration allows firmware engineers to modify the routing table without a mask change, while the 10-macrocell structure is appropriate for moderate control paths. A 10 ns device can also meet common peripheral-interface timing when external pull-ups, bus capacitance, and propagation-delay skew are included in the timing budget. Validate every configured pin against the JEDEC-compatible PLCC pinout before fabrication.

⚡

Data Routing and Signal Conditioning

The ATF22LV10C-10JC is useful for compact data-routing, parity, gating, and signal-conditioning functions placed between larger digital systems. Its 500-gate equivalent capacity can replace groups of small gate ICs while reducing package count and interconnect complexity. The 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V system variants, provided every connected device uses compatible logic levels. Because programmable outputs can introduce different delays, analyze critical paths and use the manufacturer timing characteristics to confirm setup and hold margins.

📺

Low-Power Instrumentation Control

The ATF22LV10C-10JC fits low-power instrumentation that combines retained control logic with an explicit standby mode. Activating the user-controlled power-down feature can reduce standby current to 10 uA typical according to the Microchip Technology datasheet, helping manage total system power in intermittently operated equipment. Flash configuration avoids volatile power loss and allows controlled logic revisions. The control system must ensure that the PLCC PD pin remains inactive during measurement and reset sequences, since premature assertion would stop normal device operation.

🖥️

Legacy System Logic Consolidation

The ATF22LV10C-10JC can simplify modernization of older control systems that combine discrete gates, counters, and address-decoding logic. A Microchip Technology application note identifies the ATF22LV10C family as a JEDEC-compatible replacement for the Xilinx XCR22LV10, providing a migration route when the legacy device is unavailable. Because the ATF22LV10C uses flash configuration rather than the original technology, engineers should validate the programming file, pin functions, timing, and power behavior rather than relying only on package similarity.

🧩

Embedded Control Interface Logic

The ATF22LV10C-10JC is appropriate for small embedded interface blocks that translate enables, status flags, and fault signals between subsystems. Ten macrocells provide enough capacity for several Boolean relationships without introducing a larger FPGA or CPLD footprint. The 10 ns grade supports many control-oriented paths, while electrically erasable flash retains the configuration during maintenance and field updates. Engineers should reserve unused pins correctly, account for program or test modes in the board controller, and confirm that every output remains within the applicable supply and temperature limits.

Сводка рекомендуемых товаров

ATF22LV10C-25JI Slower ATF22LV10C family logic option Используется в: Industrial Address Decoding, Legacy System Logic Consolidation ATF22V10C-10JC Microchip Technology Используется в: Industrial Address Decoding, Data Routing and Signal Conditioning, Embedded Control Interface Logic ATF22LV10C-10JI Same-family 10 ns industrial-temperature option Используется в: Embedded Command Multiplexing, Low-Power Instrumentation Control, Embedded Control Interface Logic ATF22LV10C-10JU Microchip Technology Используется в: Embedded Command Multiplexing, Low-Power Instrumentation Control ATF22LV10CZ-25JI Microchip Technology Используется в: Data Routing and Signal Conditioning XCR22LV10 Legacy JEDEC-compatible 22V10 reference device Используется в: Legacy System Logic Consolidation
What is ATF22LV10C-10JC?
The ATF22LV10C-10JC is a 500-gate, 10-macrocell CMOS simple programmable logic device with a 10 ns speed grade, electrically erasable flash configuration memory, and a 28-pin PLCC package. According to the Microchip Technology product page, ATF22LV10C devices support supply voltages from 3.0 V to 5.5 V and retain their programmed configuration when power is removed.
What are the key specifications of ATF22LV10C-10JC that engineers should know?
The ATF22LV10C-10JC combines 10 macrocells, approximately 500 gates, a 10 ns processing speed, and a 3.0 V to 5.5 V operating range. It uses electrically erasable flash memory for configuration and is offered in a 28-pin PLCC package measuring 11.51 mm by 11.51 mm. According to the Microchip Technology datasheet, its user-controlled power-down mode reduces standby current to 10 uA typical.
Where can I download the ATF22LV10C-10JC datasheet PDF?
The official ATF22LV10C-10JC datasheet PDF is available from the Microchip Technology document link on this page. The manufacturer document describes the electrically erasable flash architecture, macrocell organization, electrical characteristics, programming architecture, and package pin descriptions. Use that document for the authoritative PLCC pin table and operating-limit checks before creating or updating a PCB footprint.
Where can I find the ATF22LV10C-10JC pinout?
The ATF22LV10C-10JC pinout is found in the pin-description table of the official Microchip Technology ATF22LV10C datasheet. The 28-pin PLCC includes the device power connections, programming interface, clock or enable controls as applicable to the configuration, and programmable I/O functions. Assign PCB tracks from the package drawing and pin table rather than inferring functions from a generic PLCC diagram.
How much power does ATF22LV10C-10JC consume in power-down mode?
The ATF22LV10C-10JC can reduce standby current to 10 uA typical when its user-controlled power-down feature is enabled. According to the Microchip Technology datasheet, the PD input is pin 5 on the PLCC package. This function is valuable in low-duty-cycle equipment, but the external control logic must keep PD inactive whenever normal operating state is required.
Can ATF22LV10C-10JC replace a discrete gate-logic circuit?
Yes, the ATF22LV10C-10JC can consolidate compatible combinational, registered, decoding, multiplexing, and control functions into one programmable device. Its 10 macrocells and 500-gate capacity make it most useful for moderate glue-logic requirements, not large control systems. Compare every existing gate, register, polarity, and timing constraint against the macrocell allocation before replacing separate logic.
Is ATF22LV10C-10JC suitable for industrial control systems?
The ATF22LV10C-10JC is suitable for many industrial control functions when the required supply voltage, temperature range, and timing fall within its specified limits. Its electrically erasable flash configuration supports field updates, while the 10 ns speed grade provides timing margin for address decoding and control-logic paths. Confirm the exact temperature grade and environmental requirements before releasing production hardware.
What is the difference between ATF22LV10C-10JC and ATF22LV10C-10JI?
Both devices are 10 ns ATF22LV10C members with 10 macrocells, 500-gate capacity, and a 28-pin PLCC footprint, but their orderable temperature grades differ. The ATF22LV10C-10JI listing identifies an industrial-temperature version, while the ATF22LV10C-10JC is the target commercial-temperature ordering. Confirm the manufacturer ordering table before using one in place of the other.
ATF22LV10C-10JC vs ATF22LV10C-10JU: which is better for a new design?
Choose the grade that matches the required ambient temperature rather than selecting only by the 10 ns speed rating. The ATF22LV10C-10JC and ATF22LV10C-10JU are both 10 ns, 10-macrocell devices in the 28-pin PLCC package, but the suffix identifies a different temperature grade. For continuous industrial ambient conditions, the -10JI variant is the more explicit choice if its stated grade satisfies the design.
What is the best drop-in replacement for ATF22LV10C-10JC?
The closest documented drop-in choices are compatible ATF22LV10C speed, temperature, and package variants, including ATF22LV10C-10JI and ATF22LV10C-10JU in the same 28-pin PLCC format. Compatibility does not mean every suffix is interchangeable: verify supply voltage, temperature grade, timing, programming file, and pin functions in the manufacturer ordering information before substitution.
What can replace ATF22LV10C-10JC without changing the PCB?
An ATF22LV10C variant in the same 28-pin PLCC package can potentially replace the ATF22LV10C-10JC without changing the PCB land pattern. ATF22LV10C-10JI and ATF22LV10C-10JU are documented alternatives, while ATF22LV10CZ-25JI provides a slower speed grade. Check the programming architecture, power-down behavior, temperature grade, and timing constraints before approving a replacement.
When should I choose ATF22LV10C-10JC over ATF22V10C-10JC?
Choose ATF22LV10C-10JC when the surrounding system operates from the 3.0 V to 5.5 V ATF22LV10C range and requires the 10 ns grade with 10 macrocells. Choose ATF22V10C-10JC for a 5 V design after checking signal compatibility. The two families occupy the same 28-pin PLCC footprint, but their specified operating voltages and electrical characteristics must not be assumed identical.
Is ATF22LV10C-10JC suitable for low-power embedded control?
The ATF22LV10C-10JC can suit low-power embedded control when the design is primarily low-voltage glue logic. Its user-controlled power-down mode reduces standby current to 10 uA typical, and flash configuration avoids powered refresh or volatile-memory requirements. The surrounding controller must define PD behavior correctly during reset, sleep, and wake-up transitions to avoid unintended shutdown.
Where can I buy ATF22LV10C-10JC and check its lead time?
Use the Request a Quote form on this page to request ATF22LV10C-10JC pricing, current availability, and lead time. The manufacturer and distributor records show an orderable 28-pin PLCC device, but current commercial conditions can change. Request the exact MPN ATF22LV10C-10JC rather than a broader ATF22V10C family designation to avoid package or grade mismatches.
What is the price of ATF22LV10C-10JC?
The current commercial price for ATF22LV10C-10JC is handled through the Request a Quote form on this page. Quote requests should include the required quantity, target package, and shipment destination. Because the exact suffix identifies a 10 ns, 28-pin PLCC configuration, include the complete MPN in the request to eliminate ambiguity with other ATF22V10C grades.
Is ATF22LV10C-10JC in stock?
Current stock status for ATF22LV10C-10JC should be confirmed through the Request a Quote form on this page. The product is listed for ordering with a 10 ns speed grade in a 28-pin PLCC package, but inventory and lead time can vary by quantity and date. A quote response provides the current purchasing commitment for the exact MPN.

Справочные инженерные данные для ATF22LV10C-10JC — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose ATF22LV10C-10JC for a 3.3 V design that needs 10 macrocells, approximately 500 gates, and a 10 ns processing grade in a 28-pin PLCC package. Choose ATF22LV10C-10JI when the same electrical speed and logic capacity are needed but the design calls for an explicitly industrial-temperature ordering; confirm that its full operating-temperature range satisfies the system requirement. Choose ATF22LV10C-10JU when its documented temperature grade better matches the intended ambient conditions. Select ATF22LV10CZ-25JI only when the 25 ns timing is sufficient, since its propagation delay is 15 ns longer than the target grade. ATF22V10C-10JC belongs to the 5 V family and should be selected only after confirming every supply and signal level. For all substitutions, verify the programming file, macrocell allocation, PD behavior, and PLCC pin assignments before production.

Сравнение с аналогами

Параметр Этот товар ATF22LV10C-10JI ATF22LV10C-10JU ATF22LV10CZ-25JI
Package 28-PLCC (11.51 mm x 11.51 mm) 28-PLCC (11.51 mm x 11.51 mm) 28-PLCC (11.51 mm x 11.51 mm) 28-PLCC (11.51 mm x 11.51 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Device Type ATF22LV10C SPLD ATF22LV10C SPLD ATF22LV10C SPLD ATF22LV10CZ SPLD
Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Logic Capacity 500 gates 500 gates 500 gates 500 gates
Processing Speed 10 ns 10 ns 10 ns 25 ns
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Configuration Memory Electrically erasable flash Electrically erasable flash Electrically erasable flash Electrically erasable flash

Ключевые отличия

  • Faster processing grade (против ATF22LV10CZ-25JI)
  • Explicit industrial-temperature ordering option (против ATF22LV10C-10JU)
  • Matches the 10 ns family performance target (против ATF22LV10CZ-25JI)

Заметки по проектированию

Confirm the complete ATF22LV10C supply range of 3.0 V to 5.5 V against every connected input, output, and programming signal before layout release. The ATF22V10C family is intended for 5 V systems, while the ATF22LV10C family serves lower-voltage designs; do not treat their otherwise similar PLCC pinouts as interchangeable without reviewing the electrical specifications.

Use the 28-pin PLCC land pattern and pin-description table from the official ATF22LV10C documentation. Keep the programming interface and power-down control accessible to the board programmer, and account for all PLCC pins rather than assuming unused I/O locations. Mechanical courtyard clearance should also allow for the 11.51 mm by 11.51 mm package body and lead geometry.

The PD function reduces standby current to 10 uA typical, but an unintended PD assertion can stop the device from operating. Define the PD state during reset, programming, and normal operation, and add a deterministic pull resistor where appropriate. When upgrading from ATF22V10C, verify that voltage levels and the complete ordering suffix remain valid rather than relying only on package fit.

Analyze configured output paths as individual timing channels because product-term and routing delays can vary. For the 10 ns grade, include external pull-up resistance, bus capacitance, and clock or enable skew when checking setup and hold margins. For the ATF22LV10CZ-25JI alternative, its 25 ns speed grade adds 15 ns of nominal delay relative to the ATF22LV10C-10JC and may not meet the same critical path.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No explicit environmental or material-compliance declarations are included in the cited manufacturer product materials.

Данные проверены: 2026-11-11 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ATF22LV10C-10JC datasheet ATF22LV10C-10JC pinout ATF22LV10C-10JC datasheet pdf ATF22LV10C-10JC equivalent ATF22LV10C-10JC replacement ATF22LV10C-10JC cross reference ATF22LV10C-10JC footprint ATF22LV10C-10JC price ATF22LV10C-10JC stock Microchip ATF22LV10C-10JC ATF22LV10C 28-PLCC pinout ATF22LV10C application circuit

Связанные компоненты & термины

Microchip Technology ATF22LV10C-10JC ATF22LV10C-10JI ATF22LV10C-10JU ATF22LV10CZ-25JI ATF22V10C-10JC XCR22LV10 simple programmable logic device SPLD programmable logic device PLD electrically erasable flash memory CMOS macrocell 500 gates 10 ns processing speed 3.0 V to 5.5 V power-down mode 28-pin PLCC surface-mount package JEDEC-compatible logic address decoding industrial control flash configuration memory
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ