ATSAMB11-XPRO - BLE 4.1 SmartConnect Xplained Pro Kit | Microchip
MPN: ATSAMB11-XPRO ✓ فعالATSAMB11-XPRO جائزہ
A Bluetooth Low Energy (BLE) Xplained Pro kit is a hardware prototyping platform that combines the Atmel/Microchip Xplained Pro extension header ecosystem with a fully certified BLE radio module. The Xplained Pro family follows a standardized 2x5 100-mil extension header and a 1x2 current-measurement header, so the ATSAMB11-XPRO can share daughter cards (XPRO extensions) with the SAM D/SAM4/SAMA5 development boards from Microchip, accelerating sensor, display, and connectivity prototyping.
Key features of this kit include the ATSAMB11G18A MCU evaluation board, on-board 32.768 kHz and 12 MHz clock sources, the standard Xplained Pro extension header for XPRO-compatible click-board and MikroElektronika shields, an integrated MCU current-measurement header for power profiling, full Bluetooth SIG 4.1 BLE certification inherited from the on-module SoC, and USB/power input for Atmel Studio / Microchip Studio debugging via the on-board EDBG interface. The kit supports Windows 7 / 8 / Vista / XP IDE toolchains.
The SAM B11 family integrates the radio, baseband, and application processor on a single die, eliminating external balun/matching components and reducing BOM. The PMU supports direct connection to a single 1.8-4.3V supply (typical coin-cell operation), and the ARM Cortex-M0 core delivers deterministic interrupt latency required for BLE link-layer timing, making the SoC well suited for beacon, health-device, and remote-control firmware.
Typical applications include BLE peripheral prototyping (heart-rate, proximity, environmental sensors), iBeacon / Eddystone beaconing, smart-home and lighting-control gateways, and low-power wireless sensor nodes. The Xplained Pro form factor also makes it a useful reference design for FCC/CE modular certification reuse.
When designing with this kit, place the included 2.4 GHz antenna in free space and avoid ground copper directly beneath the trace antenna; the on-board MCU current-measurement header allows accurate SoC power profiling across BLE advertising, scan, and connected states using a source-measure unit or shunt resistor.
کے لیے ڈراپ اِن متبادل ATSAMB11-XPRO — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATSAMB11-XPRO (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Product Type, Debug Interface, RoHS Status, Flash Memory, MCU Core.
ATBTLC1000-XPRO
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATSAMW25-XPRO
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATSAMB11ZR-XPRO
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATSAMB11-XPRO تفصیلات (مینوفیکچرر کی شائع کردہ)
| Product Type | Bluetooth Smart Xplained Pro Evaluation Kit |
| Target MCU / Module | ATSAMB11-MR510CA (ATSAMB11G18A SoC) |
| MCU Core | ARM Cortex-M0 32-bit |
| Bluetooth Version | BLE 4.1 (Bluetooth Smart) |
| Operating Frequency | 2.4 GHz ISM band |
| Flash Memory | 256 KB |
| Low-Frequency Clock | 32.768 kHz |
| Primary CPU Clock | 12 MHz |
| Form Factor | Xplained Pro (Atmel/Microchip standard) |
| Extension Header | 2x5 100-mil Xplained Pro header |
| Current Measurement | 1x2 100-mil pin-header for MCU current shunt |
| Debug Interface | On-board EDBG (USB to SWD/UART) |
| Supported OS | Windows 7 / 8 / Vista / XP |
| Integrated Radio | Transceiver, modem, MAC, PA, TR switch |
| Integrated Power Management | Yes (on-module PMU) |
| Bluetooth Certification | Bluetooth SIG 4.1 (module pre-certified) |
| Typical Use Case | BLE peripheral / beacon prototyping |
ATSAMB11-XPRO پن کنفیگریشن
| پن J1-1 | VCC — Xplained Pro extension header VCC (3.3 V) |
| پن J1-2 | GPIO — Xplained Pro extension header GPIO / signal pin |
| پن J1-3 | GPIO — Xplained Pro extension header GPIO / signal pin |
| پن J1-4 | GPIO — Xplained Pro extension header GPIO / signal pin |
| پن J1-5 | GPIO — Xplained Pro extension header GPIO / signal pin |
| پن J1-6 | GPIO — Xplained Pro extension header GPIO / signal pin |
| پن J1-7 | GPIO — Xplained Pro extension header GPIO / signal pin |
| پن J1-8 | GND — Xplained Pro extension header ground |
| پن J1-9 | GPIO — Xplained Pro extension header GPIO / signal pin |
| پن J1-10 | GND — Xplained Pro extension header ground |
عام استعمالات
ATSAMB11-XPRO کے لیے موزوں ہے 6 ایپلیکیشنs: BLE Heart-Rate / Proximity Peripheral Prototype, iBeacon / Eddystone Beaconing Firmware Development, Smart Home Lighting / HVAC Wireless Node, Low-Power Wireless Sensor Node Reference Design, BLE Remote Control / HID Prototype, BLE Audio Streaming / Voice Remote Reference.
BLE Heart-Rate / Proximity Peripheral Prototype
The ATSAMB11-XPRO is well suited for prototyping Bluetooth Low Energy peripherals such as heart-rate, proximity, and environmental sensors because the integrated ATSAMB11G18A SoC combines a Cortex-M0 application processor with a fully certified BLE 4.1 radio. Its 256 KB Flash is enough to host the Microchip ASF/Wireless Framework BLE stack plus a custom GATT profile, and the integrated PMU allows direct connection of a CR2032 coin cell. The on-board 1x2 current-measurement header lets you quantify average SoC draw across advertising, scan, and connected intervals, which is essential when targeting sub-100 uA average current budgets for wearable medical peripherals.
تجویز کردہ
iBeacon / Eddystone Beaconing Firmware Development
For iBeacon and Eddystone beacon designs, the ATSAMB11-XPRO exposes the SAM B11's low-power BLE advertising engine with deterministic Cortex-M0 timing required for precise advertising intervals. The integrated PA and TR switch deliver +4 dBm typical TX output and good RX sensitivity without external matching components, and the on-module PMU enables multi-year coin-cell battery life when the beacon advertises every 100-1000 ms. Engineers can use the Xplained Pro extension header to attach an external accelerometer and only wake the radio on motion, using the on-board 32.768 kHz crystal as the low-power timebase.
تجویز کردہ
Smart Home Lighting / HVAC Wireless Node
Smart-home lighting controllers, BLE thermostats, and HVAC wireless wall-modules benefit from the ATSAMB11-XPRO's integrated 2.4 GHz radio chain, Cortex-M0 MCU, and on-module PMU which together cut BOM cost and PCB area. The Xplained Pro 2x5 extension header accepts MikroElektronika click boards for adding relays, Triac drivers, or temperature/humidity sensors, allowing rapid iteration on ZigBee/BLE bridge prototypes. The kit's pre-certified BLE 4.1 radio also simplifies FCC/CE modular compliance for the end product, since the integrated antenna path is reused verbatim in the ATSAMB11-MR510CA module deployed in production.
تجویز کردہ
Low-Power Wireless Sensor Node Reference Design
Industrial and agricultural wireless sensor nodes use the ATSAMB11-XPRO as a reference platform to validate sub-1 mA average BLE sensor nodes before committing to a custom PCB. The on-board EDBG debugger accelerates firmware iteration, while the 1x2 current-measurement header plus an external source-measure unit enables accurate SoC power profiling across duty-cycled BLE connections. Combined with the standard Xplained Pro extension header, designers can stack an environmental sensor click-board and reuse the same code on the production ATSAMB11-MR510CA SiP without re-certifying the radio.
تجویز کردہ
BLE Remote Control / HID Prototype
The ATSAMB11-XPRO is useful for prototyping Bluetooth Low Energy remote controls, presentation clickers, and HID peripherals because the SAM B11 SoC's BLE link layer can sustain low-latency connection intervals down to 7.5 ms while still running on coin-cell power. The Cortex-M0 core can scan a button matrix connected to the XPRO extension header and emit HID-over-GATT notifications with deterministic timing. The on-board 12 MHz primary crystal and 32.768 kHz RTC crystal together support both active-mode radio operation and low-power sleep modes typical of remote-control duty cycles.
تجویز کردہ
BLE Audio Streaming / Voice Remote Reference
Audio-over-BLE prototypes, voice-remote controls, and hearing-aid accessory designs can use the ATSAMB11-XPRO as a software development platform for evaluating the SAM B11's BLE throughput, latency, and PDU scheduling. The kit's 256 KB Flash holds the ASF/Wireless Framework stack plus optional LC3/ADPCM codecs, and the Xplained Pro extension header accepts audio codec DAC click-boards for hardware-in-the-loop evaluation. Designers iterate using Microchip Studio on Windows and once the audio pipeline is validated, port the binary to the ATSAMB11-MR510CA SiP for the end-product PCB.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ATSAMB11-XPRO — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ATBTLC1000-XPRO | ATSAMW25-XPRO | ATSAMB11ZR-XPRO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package / Form Factor | Xplained Pro Kit (2x5 100-mil extension header) | Xplained Pro Kit (same) | Xplained Pro Kit (same) | Xplained Pro Kit (same) |
| Bluetooth Version | BLE 4.1 | BLE 5.0 | BLE + Wi-Fi combo (WILC3000) | BLE 4.1 |
| Target SoC | ATSAMB11G18A (Cortex-M0 + 2.4 GHz radio) | ATBTLC1000 (Cortex-M0 + BLE 5.0) | ATSAMW25 (SAMD21 host + WILC3000 combo) | ATSAMB11ZR SiP module |
| Flash Memory | 256 KB | 128 KB | 256 KB (SAMD21 host) | 256 KB |
| Integrated PMU | Yes (on-module) | Yes (on-module) | External LDO recommended | Yes (on-module) |
| Wi-Fi | No | No | Yes (WILC3000) | No |
| Debug Interface | On-board EDBG (USB-SWD/UART) | On-board EDBG | On-board EDBG | On-board EDBG |
| MCU Current-Measurement Header | 1x2 100-mil (included) | 1x2 100-mil (included) | 1x2 100-mil (included) | 1x2 100-mil (included) |
اہم امتیازی خصوصیات
- Fully integrated BLE 4.1 radio + Cortex-M0 SoC + PMU in a single pre-certified module (بمقابلہATBTLC1000-XPRO)
- BLE-only design (no Wi-Fi cost/overhead) vs Wi-Fi+BT combo (بمقابلہATSAMW25-XPRO)
- Same Xplained Pro form factor, EDBG debugger, and Microchip Studio tooling as the rest of the SAM XPRO family (بمقابلہGeneric BLE dongle / Nordic nRF51-DK)
ڈیزائن نوٹس
The ATSAMB11-XPRO hosts the ATSAMB11-MR510CA SiP whose integrated 2.4 GHz trace antenna requires a keep-out area beneath and around the antenna in any production PCB derived from the kit. Reuse the ATSAMB11-MR510CA reference layout from the SAM B11 family datasheet (70005271C) verbatim, including antenna dimensions, GND plane clearance, and via stitching pattern, to preserve the Bluetooth SIG pre-certification. Estimated: ground keep-out minimum 5 mm beyond antenna trace on all layers.
For coin-cell designs (CR2032, CR2477), drive the ATSAMB11-MR510CA module from a single 1.8-4.3 V rail through its integrated PMU; do not add a separate LDO in front of it. Place a 10 uF X5R/X7R ceramic bulk capacitor as close as possible to the module's VDD pin to suppress BLE TX inrush current (estimated peak ~25 mA per TX burst at 0 dBm). Add a 100 nF decoupling cap in parallel for high-frequency noise bypass, and verify peak burst current is within the coin cell's pulse rating.
Do not assume BLE 5.0 features (LE Coded PHY, 2 Mbps PHY, periodic advertising, advertising sets) are available on the SAM B11 SoC; this kit supports BLE 4.1 only, and the Microchip BLE stack on this SoC does not expose the BLE 5.x feature set. For BLE 5.0 designs, migrate to ATBTLC1000-XPRO or to a Nordic nRF52/TI CC26xx platform. Also verify the XPRO extension header pinout against the SAM B11 datasheet before connecting third-party shields - the SAM B11 SoC does not expose every XPRO standard signal (no analog comparator pins, no DAC pins).
Use the on-board MCU current-measurement header (1x2 100-mil pin-header) on the ATSAMB11-XPRO with a source-measure unit or a 10-100 ohm shunt resistor to capture SoC current across BLE advertising, scanning, connection, and sleep states. This is the only reliable way to estimate battery life for coin-cell designs, and the kit's dedicated shunt point is preferred over measuring at the USB input (which adds EDBG/regulator quiescent current). Recommended: sample at >= 1 kSa/s with a 1 ms moving average to capture TX burst peaks.
تعمیل کی معلومات
RoHS/REACH compliance per Microchip Technology product page. The on-module ATSAMB11-MR510CA SiP carries Bluetooth SIG 4.1 modular certification inherited by the XPRO kit.