ATSAMD20G18A-AN - 48MHz Cortex-M0+ MCU | Microchip
MPN: ATSAMD20G18A-AN ✓ فعالATSAMD20G18A-AN جائزہ
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated device. The ARM Cortex-M0+ architecture belongs to the microcontroller processor hierarchy and supports compact, low-power embedded control. In the broader power-management hierarchy, operating the ATSAMD20G18A-AN from a 1.62 V to 3.63 V rail helps reduce energy use in battery-powered equipment while retaining 48 MHz processing performance.
The ATSAMD20G18A-AN provides 256 KB of flash for firmware and 32 KB of SRAM for working data. Its 10-bit and 12-bit conversion capabilities suit measurement and control systems, while its low-power design supports consumer, home-automation, metering, and industrial applications. The 48 MHz operating speed provides useful headroom for protocol handling, digital control, and real-time peripheral coordination without requiring a higher-complexity processor.
The 48-TQFP package exposes more interface pins than smaller embedded packages and supports practical PCB routing at a 7 x 7 mm footprint. The device operates from 1.62 V to 3.63 V across industrial temperature conditions according to the family documentation. At temperatures up to 105 degrees Celsius, the family is specified for DC operation up to 48 MHz. Its flash and SRAM resources also make the device suitable for connected products that require local configuration, data logging, or firmware storage.
Typical uses include smart-home sensor nodes, industrial metering equipment, consumer controls, compact automation modules, and low-power connected peripherals. The combination of Cortex-M0+ processing, integrated flash, and SRAM allows a product to execute control logic locally while managing sensors, communication interfaces, and human-interface outputs. Designers should also account for the clock, decoupling, programming, and peripheral requirements documented for the ATSAMD20G18 family.
For a new layout, follow the manufacturer pin-description table, recommended decoupling network, and clock configuration when assigning tracks. If an existing board uses a different package, such as the 48-QFN ATSAMD20G18A-MUT, verify every exposed-pad and pin assignment rather than treating the two packages as interchangeable.
This page combines manufacturer family information, package details, application guidance, and engineering-focused comparison notes to support component selection, firmware planning, PCB layout, and sourcing decisions for the ATSAMD20G18A-AN.
کے لیے ڈراپ اِن متبادل ATSAMD20G18A-AN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATSAMD20G18A-AN (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, DAC, Flash Memory, Peripheral Touch Controller (PTC).
ATSAMD20G18A-AU
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATSAMD21G18A-AU
✅ ڈراپ-اِن✓ اسٹاک میں
$2.78 / یونٹ
ڈیٹا شیٹ دیکھیں →ATSAMD20G18A-AN زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit ARM Cortex-M0+ Flash Microcontroller |
| Series | SAM D20G |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
| Operating Voltage Range | 1.62 V to 3.63 V |
| Industrial Temperature Range | -40 degrees C to +85 degrees C |
| Extended Temperature Range | -40 degrees C to +105 degrees C |
| Maximum Frequency at +105 degrees C | 48 MHz |
| پیکیج | 48-lead TQFP, 7 x 7 mm |
| پن کی تعداد | 48 pins |
| ماؤنٹنگ ٹائپ | Surface Mount |
| ADC Resolution | 10-bit and 12-bit |
| Processor Architecture | ARM Cortex-M0+ |
| Product Color | Green |
ATSAMD20G18A-AN 48-lead tqfp, 7 x 7 mm پن کنفیگریشن گائیڈ
ATSAMD20G18A-AN (48-lead tqfp, 7 x 7 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATSAMD20G18A-AN.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ATSAMD20G18A-AN کے لیے موزوں ہے 6 ایپلیکیشنs: Smart Home Sensor Nodes, Industrial Metering Equipment, Consumer Appliance Controls, Home Automation Gateways, Battery-Powered IoT Devices, Data Acquisition and Control.
Smart Home Sensor Nodes
The ATSAMD20G18A-AN fits smart-home sensor nodes because its 48 MHz ARM Cortex-M0+ core provides enough performance for sensor sampling, local filtering, and protocol handling while retaining low-voltage operation from 1.62 V to 3.63 V. The 256 KB of flash can hold application firmware and configuration, while 32 KB of SRAM supports working buffers and communication state. Its 48-TQFP package provides 48 accessible leads for power, debug, communications, and discrete sensing interfaces. A design should use the family pin description to assign debug and programming signals and should verify each peripheral against the 1.62 V minimum operating voltage.
تجویز کردہ
Industrial Metering Equipment
The ATSAMD20G18A-AN is appropriate for industrial metering equipment that needs deterministic embedded control, local nonvolatile storage, and mixed analog measurement capability. Its 10-bit and 12-bit conversion features support metering signal acquisition, while the 48 MHz Cortex-M0+ core can process readings, update local registers, and manage communications. The 1.62 V to 3.63 V operating range allows integration with low-energy sensor chains, and the industrial temperature range of -40 degrees C to +85 degrees C suits many deployed environments. Metering designs should calculate accuracy and noise budgets around the selected external front end because converter resolution alone does not establish metrological performance.
تجویز کردہ
Consumer Appliance Controls
The ATSAMD20G18A-AN can serve as the central controller in a compact consumer appliance because it combines 48 MHz processing, 256 KB of flash, and 32 KB of SRAM on one device. The microcontroller can coordinate user inputs, drive discrete indicators, control actuators, and maintain configuration between power cycles. Its 1.62 V to 3.63 V operating range supports low-voltage internal rails, while the 48-TQFP package is manageable for multilayer consumer PCB layouts. Designers should follow the manufacturer clock and decoupling guidance, provide programming access for production, and validate that actuator drive circuits remain compatible with the selected supply voltage.
تجویز کردہ
Home Automation Gateways
The ATSAMD20G18A-AN is suitable for local control tasks in a compact home-automation gateway or wall controller. Its 48 MHz Cortex-M0+ processor can handle protocol state machines, event routing, input debouncing, and update logic, while 256 KB of flash stores firmware and configuration. With 32 KB of SRAM, the device can maintain communication buffers and transient application data without requiring external memory in modest designs. The 48-lead TQFP package exposes the necessary interface options without a very large footprint. Boundary, ESD, surge, and isolation requirements should be implemented around externally connected wiring rather than relying on the microcontroller pins for protection.
تجویز کردہ
Battery-Powered IoT Devices
The ATSAMD20G18A-AN supports battery-powered IoT devices that require local processing between network transmissions. Its 1.62 V to 3.63 V operating range permits use with low-voltage energy-storage systems, while the 48 MHz Cortex-M0+ core can execute filtering, sensor compensation, and protocol framing without a separate processor. On-chip flash stores firmware and persistent settings, and the 32 KB SRAM supports data paths and protocol buffers. A low-power design should use the device's documented sleep behavior, minimize always-on peripherals, and select a regulator with an appropriate efficiency and quiescent-current balance for the required load current.
تجویز کردہ
Data Acquisition and Control
The ATSAMD20G18A-AN is well suited to compact data-acquisition and control subsystems because it combines 10-bit and 12-bit conversion capability with 48 MHz real-time processing. The microcontroller can service multiple sampling tasks, filter measurements, enforce timing, and retain configuration in its 256 KB of flash. Its 32 KB of SRAM provides workspace for acquisition buffers, while the 48-TQFP package offers a broad set of signal and power connections. The acquisition accuracy depends on the selected analog front end, reference, analog supply, and routing, so engineers should establish gain and noise requirements before finalizing the sensor interface.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ATSAMD20G18A-AN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ATSAMD20G18A-AU | ATSAMD21G18A-AU |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-TQFP (7x7 mm) | 48-TQFP (7x7 mm) | 48-TQFP (7x7 mm) |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB |
| SRAM | 32 KB | 32 KB | 32 KB |
| Operating Voltage | 1.62 V to 3.63 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Product Family | SAM D20G | SAM D20G | SAM D21G |
| Temperature and Ordering Configuration | -AN suffix configuration, 105 degrees C grade indicated by distributor listing | -AU suffix configuration | 48-TQFP, industrial temperature configuration |
اہم امتیازی خصوصیات
- Same-family configuration path (بمقابلہATSAMD21G18A-AU)
- Matching 48-TQFP mechanical format (بمقابلہATSAMD20G18A-MUT)
- 48 MHz processing with integrated memory (بمقابلہATSAMD21G18A-AU)
ڈیزائن نوٹس
Use the manufacturer ATSAMD20G18 pin-description table to assign all 48 TQFP leads and preserve the documented clock, debug, programming, and power connections. Place the required decoupling capacitors close to their associated supply pins and keep sensitive analog routing away from fast digital clock and switching nodes. The target package is 7 x 7 mm TQFP, so a QFN land pattern cannot be used without a board redesign.
Design the supply for the complete 1.62 V to 3.63 V operating range, including startup droop, regulator tolerance, transient response, and the voltage required by attached peripherals. If the MCU and analog circuitry share a rail, account for digital load steps in the regulator and supply network. Confirm that debug programming and boot behavior remain valid at the minimum system voltage before freezing the power architecture.
Do not confuse ATSAMD20G18A-AN with ATSAMD20G18A-MUT: the latter uses a 48-QFN package and has a different land pattern and pin arrangement. Also verify the ordering suffix when selecting ATSAMD20G18A-AU because temperature grade and packing media can change by suffix. A matching family name or identical memory size does not remove the need to verify the manufacturer pinout and production configuration.
Route the device clock according to the family clock-layout guidance and keep the clock path short, continuous, and away from analog inputs and switching-power nodes. If an external oscillator or crystal is used, follow the manufacturer component and loading requirements. Validate timing margin across voltage and temperature because the processor can operate at 48 MHz across the documented 1.62 V to 3.63 V supply range.
تعمیل کی معلومات
The family documentation mentions AEC-Q100 compliance for extended-temperature configurations, but the qualification status of ATSAMD20G18A-AN specifically was not stated. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.