ATSAML10D15A-YUT - 32KB Flash Cortex-M23 MCU | Microchip
MPN: ATSAML10D15A-YUT ✓ فعالATSAML10D15A-YUT جائزہ
What is a low-power Cortex-M23 microcontroller? A 32-bit microcontroller is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a set of peripherals on a single die. The Cortex-M23 is Arm's smallest and most energy-efficient TrustZone-capable core, sitting below Cortex-M0+ and Cortex-M3 in the hierarchy: ARM core -> Cortex-M family -> Cortex-M23 -> SAM L10/L11 MCU -> 32-bit low-power microcontroller. The SAM L10 family specifically targets battery-powered applications that need deterministic performance with deep-sleep current below 100 nA.
Key features include less than 25 uA/MHz active mode power consumption, less than 100 nA sleep mode current, an enhanced peripheral touch controller (PTC), multiple SERCOM serial interfaces, a 12-bit ADC, 10-bit DAC, on-chip op-amp, and analog comparators. The integrated ISO7816 smart card interface and event system make it suitable for secure and event-driven designs without CPU wake-ups.
The device is built on a low-leakage process and integrates Arm TrustZone for Cortex-M23, allowing secure and non-secure firmware regions. The peripheral touch controller supports capacitive buttons, sliders, and proximity sensing in noisy environments, while the 12-bit ADC and 10-bit DAC provide sufficient resolution for sensor conditioning and small-signal generation tasks.
Typical applications include IoT sensor nodes, secure wearables, smart card terminals, capacitive touch user interfaces, and battery-powered industrial edge devices. The combination of sub-100 nA sleep current and TrustZone security makes the SAM L10 particularly attractive for always-on sensor endpoints.
When designing with this part, choose the L10 over the L11 only if you do not need the L11's additional crypto accelerators and larger SRAM; both share the same Cortex-M23 core. The 24-SSOP package is footprint-compatible with other SAM L10/L11 24-pin variants.
This page synthesizes distributor pricing, drop-in 24-SSOP alternatives, and design notes not consolidated on the Microchip datasheet. Sourced from DigiKey, Mouser, and the Microchip product page as of 2026-09-22.
کے لیے ڈراپ اِن متبادل ATSAML10D15A-YUT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATSAML10D15A-YUT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Core Architecture, ADC, Active Mode Current, DAC.
ATSAML10D15A-YFT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATSAML10D15A-MF
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATSAML10D14A-MF
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATSAML10D15A-YU
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATSAML10D14A-YUT
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATSAML10D15A-YUT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | ARM Cortex-M23 32-bit |
| Maximum CPU Clock | 32 MHz |
| Program Memory (Flash) | 32 KB (32K x 8) |
| SRAM | 8 KB |
| پیکیج | 24-SSOP (0.209", 5.30 mm width) |
| Active Mode Current | < 25 uA/MHz |
| Sleep Mode Current | < 100 nA |
| ADC | 12-bit |
| DAC | 10-bit |
| On-Chip Op-Amp | Yes |
| Analog Comparator (AC) | Yes |
| Peripheral Touch Controller (PTC) | Yes (enhanced) |
| SERCOM Modules | Multiple (configurable USART/SPI/I2C) |
| Smart Card Interface | ISO7816 |
| Security | Arm TrustZone for Cortex-M23 |
| ماؤنٹنگ ٹائپ | Surface Mount |
| RoHS اسٹیٹس | Compliant |
ATSAML10D15A-YUT پن کنفیگریشن
| پن 1 | VDD — Power supply input |
| پن 2 | GND — Ground |
| پن 3 | RESET — Reset input, active low |
| پن 4 | PA00 — GPIO / SERCOM / ADC |
| پن 5 | PA01 — GPIO / SERCOM / ADC |
| پن 6 | PA02 — GPIO / SERCOM / ADC / DAC |
| پن 7 | PA03 — GPIO / SERCOM / ADC / DAC |
| پن 8 | PA04 — GPIO / SERCOM |
| پن 9 | PA05 — GPIO / SERCOM |
| پن 10 | PA06 — GPIO / SERCOM |
| پن 11 | PA07 — GPIO / SERCOM |
| پن 12 | PA08 — GPIO / SERCOM |
| پن 13 | PA09 — GPIO / SERCOM |
| پن 14 | PA10 — GPIO / SERCOM |
| پن 15 | PA11 — GPIO / SERCOM |
| پن 16 | PA14 — GPIO / PTC |
| پن 17 | PA15 — GPIO / PTC |
| پن 18 | PA16 — GPIO / PTC |
| پن 19 | PA17 — GPIO / PTC |
| پن 20 | PA22 — GPIO / PTC / AC |
| پن 21 | PA23 — GPIO / PTC / AC |
| پن 22 | SWDIO — Serial Wire Debug data |
| پن 23 | SWCLK — Serial Wire Debug clock |
| پن 24 | GND — Ground |
عام استعمالات
ATSAML10D15A-YUT کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered IoT Sensor Node, Capacitive Touch User Interface, Smart Card Terminal (ISO7816), Wearable Fitness Tracker, Industrial Wireless Sensor Node, Secure Smart Lock.
Battery-Powered IoT Sensor Node
The ATSAML10D15A-YUT is ideal for battery-powered IoT sensor nodes because of its industry-leading <100 nA sleep current and <25 uA/MHz active consumption. The 32 KB Flash accommodates typical BLE/Zigbee stack and application code, while 8 KB SRAM handles small sensor buffers. TrustZone isolates secure key storage from the main application, preventing firmware extraction. In a typical deployment, the MCU spends 99% of its time in deep sleep and wakes briefly to read a sensor via the 12-bit ADC and transmit via a SERCOM-configured SPI link to a radio module, achieving multi-year coin-cell battery life.
تجویز کردہ
Capacitive Touch User Interface
The ATSAML10D15A-YUT integrates an enhanced peripheral touch controller (PTC) that supports capacitive buttons, sliders, and proximity sensing without external components. Combined with the on-chip op-amp and 12-bit ADC, the MCU can also read resistive sensors in the same design. The sub-100 nA sleep current means the touch interface remains always-on without draining the battery. The 32 KB Flash is sufficient to host a touch library plus application logic, while the Cortex-M23's deterministic interrupt latency ensures low-latency touch response. Reference designs in the SAM L10 datasheet demonstrate waterproof touch button arrays.
تجویز کردہ
Smart Card Terminal (ISO7816)
The ATSAML10D15A-YUT includes a dedicated ISO7816 smart card interface, eliminating the need for an external UART-to-smart-card bridge IC. The Cortex-M23 core handles the T=0/T=1 protocol stack while TrustZone protects the cryptographic key material. Active mode power under 25 uA/MHz keeps the reader within USB bus-power budgets. The 24-SSOP package provides 24 pins, sufficient for VCC, RST, CLK, I/O, and several GPIOs for status LEDs and user feedback. This MCU is used in point-of-sale terminals, electronic ID readers, and SIM programming tools.
تجویز کردہ
Wearable Fitness Tracker
Wearables require sub-100 nA standby current to achieve multi-day battery life, which the ATSAML10D15A-YUT delivers. The Cortex-M23 core at 32 MHz runs heart-rate, step-counting, and display-update algorithms, while the on-chip DAC drives an LED driver for optical heart-rate sensing. The 12-bit ADC reads battery voltage and motion sensor data through SERCOM-configured I2C/SPI. TrustZone isolates biometric data from general-purpose firmware, meeting emerging privacy requirements. The 24-SSOP package fits inside thin wearable enclosures with a 5.30 mm width and 0.65 mm pitch.
تجویز کردہ
Industrial Wireless Sensor Node
The ATSAML10D15A-YUT suits industrial 4-20 mA loop-powered sensor nodes because of its low active power (<25 uA/MHz) and wide operating temperature range typical of the SAM L10 family. The on-chip op-amp and 12-bit ADC condition 4-20 mA current sense or bridge sensor signals directly, eliminating external analog front-ends. SERCOM interfaces connect to RS-485, LoRa, or WirelessHART transceivers. Industrial users value the deterministic Cortex-M23 interrupt latency for time-critical protocol handling. TrustZone secures calibration constants and prevents field tampering.
تجویز کردہ
Secure Smart Lock
Smart locks benefit from the ATSAML10D15A-YUT's TrustZone for Cortex-M23, which isolates credential storage from the application firmware. The <100 nA sleep current enables years of battery life on a coin cell. The enhanced peripheral touch controller supports capacitive keypad entry, while the 10-bit DAC drives a buzzer for feedback. SERCOM interfaces support BLE for smartphone pairing. The integrated ISO7816 interface can read RFID cards for credential authentication. The 24-SSOP package fits inside the limited PCB area of a cylindrical lock body.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ATSAML10D15A-YUT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ATSAML10D15A-YFT | ATSAML10D15A-MF | ATSAML10D15A-YU | ATSAML10D14A-MF | ATSAML10D14A-YUT |
|---|---|---|---|---|---|---|
| Package | 24-SSOP | 24-SSOP - same | 24-SSOP - same | 24-SSOP - same | 24-SSOP - same | 24-SSOP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | ARM Cortex-M23 | ARM Cortex-M23 | ARM Cortex-M23 | ARM Cortex-M23 | ARM Cortex-M23 | ARM Cortex-M23 |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 16 KB (-50%) | 16 KB (-50%) |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Max CPU Clock | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Active Current | <25 uA/MHz | <25 uA/MHz | <25 uA/MHz | <25 uA/MHz | <25 uA/MHz | <25 uA/MHz |
| Sleep Current | <100 nA | <100 nA | <100 nA | <100 nA | <100 nA | <100 nA |
اہم امتیازی خصوصیات
- Industry-lowest sleep current in the 24-SSOP Cortex-M23 segment (بمقابلہATSAML10D14A-YUT)
- Larger Flash for application complexity (بمقابلہATSAML10D14A-MF)
- Tape-and-reel shipping for SMT assembly (بمقابلہATSAML10D15A-YU)
ڈیزائن نوٹس
The ATSAML10D15A-YUT sleep current of <100 nA is achievable only when unused peripherals are disabled in the PMUX/PMEN registers and the Cortex-M23 is in WAIT or RETAIN sleep mode. Estimated: at 32 MHz active current of 25 uA/MHz, the MCU draws ~800 uA; transitioning to deep sleep between sensor reads reduces average current by 1000x for duty-cycled IoT nodes. Always configure the brown-out detector (BOD33) at the lowest threshold that matches your supply rail to minimize quiescent draw.
Place the 100 nF VDD decoupling capacitor within 3 mm of the VDD pin, with a via to a clean ground plane. Add a 1 uF bulk capacitor near the MCU for the analog supply rail (VDDANA). The 24-SSOP package has a 0.65 mm pin pitch, requiring fine-pitch PCB manufacturing. Route SWDIO and SWCLK away from noisy switching nodes to prevent debug-interface lockups. Expose the RESET pin to a test pad for in-system programming.
Do not assume TrustZone is enabled by default - secure firmware must configure the Security Attribution Unit (SAU) at startup to partition Flash into secure and non-secure regions. Forgetting to configure the SAU leaves the entire device in secure mode and may break non-secure application code. Additionally, the peripheral touch controller (PTC) requires dedicated firmware calibration for the specific PCB overlay material and thickness; reference Microchip application notes for touch tuning.
تعمیل کی معلومات
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - choose ATSAML10E or SAM V71 family variants for automotive applications.
