Microchip Technology

ATSAMS70Q20B-AN - 300MHz Cortex-M7 MCU | Microchip

MPN: ATSAMS70Q20B-AN ✓ فعال
144-lead LQFP, 20 mm x 20 mm Package 300 MHz Speed 1 MB (1M x 8 bits) Memory
MOQ: 1 |

ATSAMS70Q20B-AN جائزہ

The Microchip Technology ATSAMS70Q20B-AN is a 32-bit ARM Cortex-M7 SAM S70 microcontroller operating at up to 300 MHz, with 1 MB of Flash memory and 384 KB of SRAM in a 144-lead LQFP package measuring 20 mm by 20 mm. It combines high-performance Cortex-M7 processing with extensive embedded peripherals for control, communications, human-machine interface, and connected industrial equipment.

A microcontroller, or MCU, is a single integrated circuit containing a processor core, memory, I/O ports, timers, communication controllers, and analog or mixed-signal peripherals. The SAM S70 family belongs to the hierarchy of embedded MCU, 32-bit RISC processor, ARM Cortex-M microcontroller, and embedded processing platform. Its large memory and high clock rate allow designers to consolidate control functions that might otherwise require separate logic devices and programmable logic.

The ATSAMS70Q20B-AN features 1 MB of programmable Flash, 384 KB of SRAM, and a maximum 300 MHz operating frequency. According to the Microchip product listing, the device is a 32-bit Cortex-M7 controller in a 144-LQFP package. Its combination of memory capacity and processor performance supports responsive control loops, graphical human-machine interfaces, communications protocol handling, and embedded applications requiring substantial working memory.

The Cortex-M7 architecture supports an instruction set optimized for embedded control, while the SAM S70 peripheral set can reduce the need for discrete support circuits. Practical designs still require attention to clock configuration, memory interfaces, peripheral pin multiplexing, and the electrical characteristics of each communication or analog peripheral. Because the device exposes many functions through a 144-pin package, a disciplined board plan is important for separating sensitive analog routes, high-speed signals, and power distribution.

Typical uses include industrial automation controllers, factory communication equipment, building-control systems, medical and diagnostic instruments, data acquisition equipment, and human-machine interface controllers. The 1 MB Flash capacity can hold application firmware and configuration data, while 384 KB of SRAM supports buffers, protocol stacks, display data, and real-time control state.

For PCB design, place the MCU and decoupling network close to their power pins, route high-speed signals according to the pin-description and layout guidance in the manufacturer datasheet, and preserve a continuous return path beneath clock and communication interfaces. Firmware developers should also confirm the peripheral instance, interrupt configuration, and package pin assignment for every board revision before committing the layout.

This page combines the manufacturer product specifications, sourcing information, package constraints, practical design guidance, and an explicit analysis of drop-in alternatives. It helps engineers evaluate the ATSAMS70Q20B-AN not only as a 300 MHz Cortex-M7 MCU, but also as a complete embedded control platform with defined memory, package, peripheral, and sourcing characteristics.

کے لیے ڈراپ اِن متبادل ATSAMS70Q20B-AN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATSAMS70Q20B-AN (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Core Architecture, Flash Memory, Package.

Microchip Technology
Core Architecture: ARM Cortex-M7 with FPU
Flash Memory: 2 MB (2048 KB)
Package: 144-LQFP (20x20 mm, 0.5 mm pitch)
موازنہ کریں ATSAMS70Q20B-AN →

ATSAMS70Q20B-ABT

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 144-lead LQFP, 20 mm x 20 mm
Same 300 MHz Cortex-M7 core, 1 MB Flash, 384 KB SRAM, and 144-lead LQFP footprint; ordering and qualification attributes differ by 0% in core performance parameters.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATSAMS70Q21B-AN

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Microchip Technology
📦 144-lead LQFP, 20 mm x 20 mm
ARM Cortex-M7 with FPU · 300 MHz · 2 MB (2048 KB) · 384 KB · 1.08 V to 1.32 V (1.2 V typical) · 3.0 V to 3.6 V · 114 · 16-bit data, 24-bit address

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ATSAMS70Q21B-ABT

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 144-lead LQFP, 20 mm x 20 mm
Same 300 MHz Cortex-M7 architecture, 1 MB greater Flash option, and 144-lead LQFP footprint; ordering and qualification attributes differ from ATSAMS70Q20B-AN.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATSAMS70Q20B-AN زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit ARM Cortex-M7 microcontroller
Product Family SAM S70
Processor Core ARM Cortex-M7
Architecture 32-bit RISC
Maximum CPU Frequency 300 MHz
Flash Memory 1 MB (1M x 8 bits)
SRAM 384 KB
پیکیج 144-lead LQFP, 20 mm x 20 mm
Terminal Count 144 terminals
ماؤنٹنگ ٹائپ Surface mount
Technology CMOS
Core Architecture ARM Cortex-M7
Program Memory Type Flash

ATSAMS70Q20B-AN 144-lead lqfp, 20 mm x 20 mm پن کنفیگریشن گائیڈ

ATSAMS70Q20B-AN (144-lead lqfp, 20 mm x 20 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

ATSAMS70Q20B-AN کے لیے 144-lead lqfp, 20 mm x 20 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATSAMS70Q20B-AN.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ATSAMS70Q20B-AN کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Controllers, Human-Machine Interface Controllers, Data Acquisition Equipment, Medical and Diagnostic Instruments, Building Control and Environmental Systems, Secure Network Gateways.

🏭

Industrial Automation Controllers

The ATSAMS70Q20B-AN fits industrial automation controllers that must execute motion, sequencing, and communication logic within one embedded platform. Its 300 MHz ARM Cortex-M7 core supports responsive control tasks, while 1 MB of Flash accommodates application firmware, field configuration, and update data. The 384 KB of SRAM provides room for communication buffers and real-time state. A 144-lead LQFP also exposes a broad peripheral set for sensors, actuators, field buses, and machine-to-machine networking. Engineers should preserve clean power distribution, use short return paths for communication interfaces, and validate the exact pin multiplexing for every peripheral assigned to the controller.

📺

Human-Machine Interface Controllers

The ATSAMS70Q20B-AN is suitable for human-machine interface controllers that combine display updates, input handling, data buffering, and equipment control. Its 300 MHz Cortex-M7 performance can service graphical updates while reserving processor time for control logic, and 384 KB of SRAM can hold frame or touch-interface data. The 1 MB Flash capacity supports embedded interface firmware and local configuration. In a typical design, the MCU drives an LCD or touch panel through an available communication peripheral while monitoring external controls. Board planning should isolate display and touch signals from sensitive analog paths and use the manufacturer pin-description table for every display and control signal.

📟

Data Acquisition Equipment

The ATSAMS70Q20B-AN provides a capable controller for data-acquisition equipment that must sample, process, and transfer measurement data. Its 300 MHz Cortex-M7 core can run filtering and control algorithms alongside communication tasks, while 1 MB of Flash stores firmware, calibration tables, and configuration. The 384 KB of SRAM supports sample buffering and protocol stacks. Engineers can connect sensors through the MCU's documented mixed-signal and communication peripherals, then transmit results through Ethernet, serial, or other supported interfaces. Analog layout should use short, shielded signal paths and a quiet return plane, while digital and switching circuitry should be separated to minimize measurement disturbance.

💊

Medical and Diagnostic Instruments

The ATSAMS70Q20B-AN can serve as the embedded controller in medical and diagnostic instruments that require deterministic processing, sizable firmware, and extensive peripheral connectivity. Its 300 MHz Cortex-M7 core supports control sequencing, sensor management, and communication protocol handling, while 1 MB of Flash and 384 KB of SRAM support embedded software and measurement buffers. A medical design should use the documented analog and digital peripherals with careful grounding and isolation strategy, particularly when the MCU interfaces with patient-connected circuitry. Confirm the device's operating-temperature and qualification requirements for the intended use, and validate all safety and regulatory requirements independently of the MCU specification.

🧩

Building Control and Environmental Systems

The ATSAMS70Q20B-AN suits building-control and environmental monitoring systems that must combine sensor processing with network communications. Its 300 MHz Cortex-M7 core can handle control loops, data filtering, and communication tasks, while the 384 KB of SRAM supports protocol buffers and device state. The 1 MB of Flash is useful for firmware, schedules, calibration parameters, and device identification. A typical unit can acquire temperature, humidity, occupancy, or air-quality inputs and report them through a wired network interface. Low-power operation, supply tolerances, and wake-up behavior must be evaluated for the target installation, while the 144-lead footprint supports a broad range of external sensing and communication connections.

🌐

Secure Network Gateways

The ATSAMS70Q20B-AN can support embedded gateway functions that bridge field equipment, serial links, and Ethernet networks. Its 300 MHz ARM Cortex-M7 core provides processing capacity for protocol conversion, packet handling, and local control, while 1 MB of Flash and 384 KB of SRAM allow substantial firmware and working data. The 144-lead LQFP provides access to multiple communication and control peripherals for a compact industrial design. For gateway products, use controlled boot and secure firmware-update processes, isolate external network interfaces according to the product architecture, and validate timing under maximum traffic. Supply and clock integrity are especially important because network timing and Ethernet PHY interfaces can be sensitive to power disturbances.

What is the ATSAMS70Q20B-AN?
The ATSAMS70Q20B-AN is a Microchip Technology 32-bit ARM Cortex-M7 SAM S70 microcontroller rated for operation at up to 300 MHz. According to the Microchip product page for ATSAMS70Q20, it belongs to the high-performance SAM S70 family, while the product listing identifies 1 MB of Flash, 384 KB of SRAM, and a 144-lead LQFP package. It is intended for embedded control, industrial automation, communications, data acquisition, and human-machine interface designs.
What are the key specifications of ATSAMS70Q20B-AN that engineers should know?
The ATSAMS70Q20B-AN combines a 300 MHz ARM Cortex-M7 core, 1 MB of Flash, 384 KB of SRAM, and a 144-lead LQFP package measuring 20 mm by 20 mm. According to the Microchip ATSAMS70Q20 product page and distributor product descriptions, these are the principal identity parameters for the device. The memory capacity supports larger firmware images and working buffers, while the 144-pin package provides access to a broad collection of embedded peripherals and communication functions.
Where can I download the ATSAMS70Q20B-AN datasheet PDF?
The official ATSAMS70Q20 documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/ATSAMS70Q20. The page provides device documentation and downloadable supporting material for the SAM S70 family. Use the pin-description table, electrical characteristics, memory map, and package drawings in the manufacturer datasheet when assigning PCB tracks and validating the ATSAMS70Q20B-AN footprint.
Where can I find the ATSAMS70Q20B-AN pinout?
The ATSAMS70Q20B-AN uses a 144-lead LQFP package measuring 20 mm by 20 mm, and its pin assignments are documented in the pin-description table of the manufacturer datasheet. Use that table rather than a generic 144-pin drawing because signal names, power functions, and alternate peripheral mappings are specific to the ATSAMS70Q20 device. The associated package outline and land pattern should also be checked against the mechanical drawings.
What is the difference between ATSAMS70Q20B-AN and ATSAMS70Q20B-ABT?
Both devices are members of the Microchip ATSAMS70Q20B family and are associated with a 144-lead LQFP package, but ordering suffixes can identify different qualification or temperature options. ATSAMS70Q20B-AN is identified specifically as a 20 mm by 20 mm LQFP variant with a 300 MHz Cortex-M7 core and 1 MB of Flash. Confirm the complete suffix, temperature grade, and qualification status in the Microchip ordering information before treating either device as a production substitute.
Is ATSAMS70Q20B-AN suitable for industrial automation?
The ATSAMS70Q20B-AN is suitable for industrial automation applications that need real-time control, substantial firmware storage, and multiple communication interfaces. Its 300 MHz Cortex-M7 core, 1 MB of Flash, and 384 KB of SRAM are useful for machine controllers, data-acquisition nodes, and factory communication gateways. Confirm the exact operating-temperature grade, isolation requirements, and peripheral availability against the application environment.
When should I choose ATSAMS70Q20B-AN instead of another Cortex-M7 MCU?
Choose the ATSAMS70Q20B-AN when a design specifically requires the Microchip SAM S70 feature set, 300 MHz Cortex-M7 performance, 1 MB of Flash, and the 144-lead 20 mm by 20 mm LQFP footprint. A different Cortex-M7 device may offer a smaller package, different memory organization, or application-specific peripherals, so processor frequency alone is not a sufficient selection criterion. Favor ATSAMS70Q20B-AN when its documented peripherals, pin assignments, and board resources align with the design.
What is the best drop-in replacement for ATSAMS70Q20B-AN?
The closest drop-in choices are Microchip ATSAMS70Q20B-ABT, ATSAMS70Q21B-AN, and ATSAMS70Q21B-ABT because they retain the 144-lead LQFP footprint and Cortex-M7 architecture while changing only an ordering or memory-related option. Pin compatibility does not eliminate firmware migration work: memory-map differences, peripheral revisions, and ordering-code constraints must be checked. Use the Microchip cross-reference search and device revision documentation to approve a substitution.
Can ATSAMS70Q20B-CFNT replace ATSAMS70Q20B-AN?
ATSAMS70Q20B-CFNT should not be treated as a confirmed drop-in replacement for ATSAMS70Q20B-AN without a package and pin-assignment comparison. A listing describes a direct comparison between the two orderable devices, but that alone does not establish that they share the same 144-lead LQFP footprint, pin multiplexing, or electrical limits. Compare their package drawings and complete pin tables, then confirm software compatibility in Microchip documentation.
What can replace ATSAMS70Q20B-AN on an existing PCB?
An existing ATSAMS70Q20B-AN PCB can generally be evaluated for replacement with ATSAMS70Q20B-ABT, ATSAMS70Q21B-AN, or ATSAMS70Q21B-ABT because these candidates use the same 144-lead LQFP footprint. Before production use, verify every power and ground connection, alternate-function mapping, boot configuration, peripheral instance, and memory parameter. A footprint match is necessary but does not by itself guarantee application-level interchangeability.
Is ATSAMS70Q20B-AN the same as ATSAMS70Q20B-ABT?
The ATSAMS70Q20B-AN and ATSAMS70Q20B-ABT are closely related Microchip SAM S70 devices with the same 300 MHz Cortex-M7 architecture, 1 MB of Flash, 384 KB of SRAM, and 144-lead LQFP package. They are not necessarily identical in every ordering attribute. Confirm temperature grade, qualification, and the complete ordering information in the manufacturer datasheet before identifying the parts interchangeably.
Where can I buy ATSAMS70Q20B-AN and check current availability?
Use the Request a Quote form on this page to request ATSAMS70Q20B-AN pricing, current availability, lead time, and order quantity for your project. The Microchip ATSAMS70Q20 product page identifies the device family and supports technical evaluation, while the orderable ATSAMS70Q20B-AN configuration is also listed through multiple authorized channels. Submit the exact suffix and required quantity to avoid ambiguity with other package or memory options.
What is the price of ATSAMS70Q20B-AN?
The Request a Quote form on this page provides the current ATSAMS70Q20B-AN price for the requested quantity. Pricing depends on order quantity, sourcing channel, and the exact orderable suffix. The manufacturer direct page describes immediate ordering and quote review for the full ATSAMS70Q20B-AN designation, allowing buyers to obtain a current commercial response without relying on an outdated listing.
What is the lead time and stock status for ATSAMS70Q20B-AN?
Use the Request a Quote form on this page for the current ATSAMS70Q20B-AN stock position, lead time, minimum order quantity, and scheduled delivery information. The Microchip direct listing describes the full ATSAMS70Q20B-AN as factory programmable and provides an order or quote workflow. Supply your required quantity and target date so the order response can reflect the appropriate production planning.
What tools and firmware considerations apply to ATSAMS70Q20B-AN?
ATSAMS70Q20B-AN development is supported by the Microchip SAM S70 ecosystem, including the ATSAMS70Q20 product documentation and device-specific configuration resources. Firmware work must account for the 1 MB Flash and 384 KB SRAM partition, Cortex-M7 startup and vector-table configuration, clock setup, peripheral multiplexing, and the exact 144-lead pin assignments. Use the device configuration data and manufacturer application guidance corresponding to the silicon revision and package.

کے لیے انجینئرنگ ریفرنس ڈیٹا ATSAMS70Q20B-AN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose ATSAMS70Q20B-AN when the design is committed to the Microchip SAM S70 platform, requires a 300 MHz ARM Cortex-M7 core, and fits the 144-lead 20 mm by 20 mm LQFP footprint with 1 MB of Flash and 384 KB of SRAM. ATSAMS70Q20B-ABT is the closest like-for-like option when its ordering, temperature, or qualification attributes fit the production program. Consider ATSAMS70Q21B-AN or ATSAMS70Q21B-ABT when the board can accept the larger 2 MB Flash option and firmware or update storage benefits from the additional capacity. Footprint compatibility does not eliminate software validation: check boot configuration, peripheral revisions, interrupt assignments, memory maps, and development-tool support. A different MCU should be selected only when a smaller package, different communications architecture, or application-specific peripheral provides a clear design advantage.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ATSAMS70Q20B-ABT ATSAMS70Q21B-AN ATSAMS70Q21B-ABT
Package 144-lead LQFP, 20 mm x 20 mm 144-lead LQFP, 20 mm x 20 mm 144-lead LQFP, 20 mm x 20 mm 144-lead LQFP, 20 mm x 20 mm
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core ARM Cortex-M7 ARM Cortex-M7 ARM Cortex-M7 ARM Cortex-M7
Maximum CPU Frequency 300 MHz 300 MHz 300 MHz 300 MHz
Flash Memory 1 MB 1 MB 2 MB 2 MB
SRAM 384 KB 384 KB 384 KB 384 KB
Instruction Set 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC
Terminal Count 144 terminals 144 terminals 144 terminals 144 terminals
Mounting Type Surface mount Surface mount Surface mount Surface mount
Product Family ATSAMS70Q20B ATSAMS70Q20B ATSAMS70Q21B ATSAMS70Q21B
Ordering or Qualification Attributes AN ordering option ABT ordering option AN ordering option ABT ordering option

اہم امتیازی خصوصیات

  • Higher Flash capacity than the target without changing the footprint (بمقابلہATSAMS70Q21B-AN)
  • Alternative ordering option with identical core specifications (بمقابلہATSAMS70Q20B-ABT)
  • Direct package reuse for memory-expanded designs (بمقابلہATSAMS70Q21B-ABT)

ڈیزائن نوٹس

Route each MCU power domain from its supply source through dedicated decoupling branches, and place the associated capacitors close to the package power pins. Keep high-current switching nodes and external transceiver regulators physically separated from sensitive supplies. Confirm capacitor selection, voltage tolerances, and power-up sequencing against the manufacturer electrical-characteristics and layout guidance before releasing the PCB.

Use the exact 144-lead LQFP land pattern for the 20 mm by 20 mm package and verify pin-one orientation against the package drawing. The large pin count leaves little room for routing mistakes, so maintain a component-specific netlist-to-footprint audit. Preserve the manufacturer-recommended solder-mask and paste pattern rather than deriving them from a generic 144-pin library footprint.

Assign peripheral multiplexing and communication signals during schematic design, then avoid changing those assignments late in layout. Keep clock lines short and surrounded by a continuous ground reference, separate Ethernet and other high-speed interfaces from analog inputs, and provide uninterrupted return paths beneath active signal routes. Review each alternate-function pin in the manufacturer pin-description table before releasing fabrication files.

Do not substitute a similarly named SAM S70 orderable part solely because its flash capacity or package looks similar. Verify the complete ordering suffix, 144-lead LQFP dimensions, pin table, temperature grade, qualification attributes, memory layout, and peripheral revision. Also check that the development toolchain and boot configuration support the selected device rather than relying only on the family name.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact orderable device.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

atsams70q20 datasheet ATSAMS70Q20B-AN datasheet ATSAMS70Q20B-AN specifications ATSAMS70Q20B-AN pinout ATSAMS70Q20B-AN datasheet pdf ATSAMS70Q20B-AN LQFP-144 ATSAMS70Q20B-AN 300MHz Cortex-M7 ATSAMS70Q20B-AN 1MB Flash ATSAMS70Q20B-AN drop-in replacement ATSAMS70Q20B-AN vs ATSAMS70Q20B-ABT ATSAMS70Q20B-AN application circuit ATSAMS70Q20B-AN price ATSAMS70Q20B-AN stock Microchip ATSAMS70Q20B-AN

متعلقہ اجزاء اور اصطلاحات

Microchip Technology ATSAMS70Q20B-AN ATSAMS70Q20B ATSAMS70Q20B-ABT ATSAMS70Q21B-AN ATSAMS70Q21B-ABT ARM Cortex-M7 SAM S70 microcontroller MCU 32-bit RISC processor embedded controller Flash memory SRAM 144-lead LQFP LQFP package family surface-mount package industrial automation human-machine interface data acquisition industrial Ethernet firmware peripheral multiplexing boot configuration
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں