ATSAMS70Q20B-AN - 300MHz Cortex-M7 MCU | Microchip
MPN: ATSAMS70Q20B-AN ✓ ActiveATSAMS70Q20B-AN Overview
A microcontroller, or MCU, is a single integrated circuit containing a processor core, memory, I/O ports, timers, communication controllers, and analog or mixed-signal peripherals. The SAM S70 family belongs to the hierarchy of embedded MCU, 32-bit RISC processor, ARM Cortex-M microcontroller, and embedded processing platform. Its large memory and high clock rate allow designers to consolidate control functions that might otherwise require separate logic devices and programmable logic.
The ATSAMS70Q20B-AN features 1 MB of programmable Flash, 384 KB of SRAM, and a maximum 300 MHz operating frequency. According to the Microchip product listing, the device is a 32-bit Cortex-M7 controller in a 144-LQFP package. Its combination of memory capacity and processor performance supports responsive control loops, graphical human-machine interfaces, communications protocol handling, and embedded applications requiring substantial working memory.
The Cortex-M7 architecture supports an instruction set optimized for embedded control, while the SAM S70 peripheral set can reduce the need for discrete support circuits. Practical designs still require attention to clock configuration, memory interfaces, peripheral pin multiplexing, and the electrical characteristics of each communication or analog peripheral. Because the device exposes many functions through a 144-pin package, a disciplined board plan is important for separating sensitive analog routes, high-speed signals, and power distribution.
Typical uses include industrial automation controllers, factory communication equipment, building-control systems, medical and diagnostic instruments, data acquisition equipment, and human-machine interface controllers. The 1 MB Flash capacity can hold application firmware and configuration data, while 384 KB of SRAM supports buffers, protocol stacks, display data, and real-time control state.
For PCB design, place the MCU and decoupling network close to their power pins, route high-speed signals according to the pin-description and layout guidance in the manufacturer datasheet, and preserve a continuous return path beneath clock and communication interfaces. Firmware developers should also confirm the peripheral instance, interrupt configuration, and package pin assignment for every board revision before committing the layout.
This page combines the manufacturer product specifications, sourcing information, package constraints, practical design guidance, and an explicit analysis of drop-in alternatives. It helps engineers evaluate the ATSAMS70Q20B-AN not only as a 300 MHz Cortex-M7 MCU, but also as a complete embedded control platform with defined memory, package, peripheral, and sourcing characteristics.
Drop-in alternatives for ATSAMS70Q20B-AN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ATSAMS70Q20B-AN (same form factor and footprint) — differing in Core Architecture, Flash Memory, Package.
ATSAMS70Q20B-ABT
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ATSAMS70Q21B-AN
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →ATSAMS70Q21B-ABT
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ATSAMS70Q20B-AN Maximum Ratings & Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M7 microcontroller |
| Product Family | SAM S70 |
| Processor Core | ARM Cortex-M7 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 300 MHz |
| Flash Memory | 1 MB (1M x 8 bits) |
| SRAM | 384 KB |
| Package | 144-lead LQFP, 20 mm x 20 mm |
| Terminal Count | 144 terminals |
| Mounting Type | Surface mount |
| Technology | CMOS |
| Core Architecture | ARM Cortex-M7 |
| Program Memory Type | Flash |
ATSAMS70Q20B-AN 144-lead lqfp, 20 mm x 20 mm Pin Configuration Guide
Pin configuration for ATSAMS70Q20B-AN (144-lead lqfp, 20 mm x 20 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for ATSAMS70Q20B-AN.
Refer to the datasheet for full pin configuration.
Typical Applications
ATSAMS70Q20B-AN is suitable for 6 applications: Industrial Automation Controllers, Human-Machine Interface Controllers, Data Acquisition Equipment, Medical and Diagnostic Instruments, Building Control and Environmental Systems, Secure Network Gateways.
Industrial Automation Controllers
The ATSAMS70Q20B-AN fits industrial automation controllers that must execute motion, sequencing, and communication logic within one embedded platform. Its 300 MHz ARM Cortex-M7 core supports responsive control tasks, while 1 MB of Flash accommodates application firmware, field configuration, and update data. The 384 KB of SRAM provides room for communication buffers and real-time state. A 144-lead LQFP also exposes a broad peripheral set for sensors, actuators, field buses, and machine-to-machine networking. Engineers should preserve clean power distribution, use short return paths for communication interfaces, and validate the exact pin multiplexing for every peripheral assigned to the controller.
Recommended
Human-Machine Interface Controllers
The ATSAMS70Q20B-AN is suitable for human-machine interface controllers that combine display updates, input handling, data buffering, and equipment control. Its 300 MHz Cortex-M7 performance can service graphical updates while reserving processor time for control logic, and 384 KB of SRAM can hold frame or touch-interface data. The 1 MB Flash capacity supports embedded interface firmware and local configuration. In a typical design, the MCU drives an LCD or touch panel through an available communication peripheral while monitoring external controls. Board planning should isolate display and touch signals from sensitive analog paths and use the manufacturer pin-description table for every display and control signal.
Recommended
Data Acquisition Equipment
The ATSAMS70Q20B-AN provides a capable controller for data-acquisition equipment that must sample, process, and transfer measurement data. Its 300 MHz Cortex-M7 core can run filtering and control algorithms alongside communication tasks, while 1 MB of Flash stores firmware, calibration tables, and configuration. The 384 KB of SRAM supports sample buffering and protocol stacks. Engineers can connect sensors through the MCU's documented mixed-signal and communication peripherals, then transmit results through Ethernet, serial, or other supported interfaces. Analog layout should use short, shielded signal paths and a quiet return plane, while digital and switching circuitry should be separated to minimize measurement disturbance.
Recommended
Medical and Diagnostic Instruments
The ATSAMS70Q20B-AN can serve as the embedded controller in medical and diagnostic instruments that require deterministic processing, sizable firmware, and extensive peripheral connectivity. Its 300 MHz Cortex-M7 core supports control sequencing, sensor management, and communication protocol handling, while 1 MB of Flash and 384 KB of SRAM support embedded software and measurement buffers. A medical design should use the documented analog and digital peripherals with careful grounding and isolation strategy, particularly when the MCU interfaces with patient-connected circuitry. Confirm the device's operating-temperature and qualification requirements for the intended use, and validate all safety and regulatory requirements independently of the MCU specification.
Recommended
Building Control and Environmental Systems
The ATSAMS70Q20B-AN suits building-control and environmental monitoring systems that must combine sensor processing with network communications. Its 300 MHz Cortex-M7 core can handle control loops, data filtering, and communication tasks, while the 384 KB of SRAM supports protocol buffers and device state. The 1 MB of Flash is useful for firmware, schedules, calibration parameters, and device identification. A typical unit can acquire temperature, humidity, occupancy, or air-quality inputs and report them through a wired network interface. Low-power operation, supply tolerances, and wake-up behavior must be evaluated for the target installation, while the 144-lead footprint supports a broad range of external sensing and communication connections.
Recommended
Secure Network Gateways
The ATSAMS70Q20B-AN can support embedded gateway functions that bridge field equipment, serial links, and Ethernet networks. Its 300 MHz ARM Cortex-M7 core provides processing capacity for protocol conversion, packet handling, and local control, while 1 MB of Flash and 384 KB of SRAM allow substantial firmware and working data. The 144-lead LQFP provides access to multiple communication and control peripherals for a compact industrial design. For gateway products, use controlled boot and secure firmware-update processes, isolate external network interfaces according to the product architecture, and validate timing under maximum traffic. Supply and clock integrity are especially important because network timing and Ethernet PHY interfaces can be sensitive to power disturbances.
Recommended
Recommended Products Summary
Engineering reference data for ATSAMS70Q20B-AN — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ATSAMS70Q20B-ABT | ATSAMS70Q21B-AN | ATSAMS70Q21B-ABT |
|---|---|---|---|---|
| Package | 144-lead LQFP, 20 mm x 20 mm | 144-lead LQFP, 20 mm x 20 mm | 144-lead LQFP, 20 mm x 20 mm | 144-lead LQFP, 20 mm x 20 mm |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Maximum CPU Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| Flash Memory | 1 MB | 1 MB | 2 MB | 2 MB |
| SRAM | 384 KB | 384 KB | 384 KB | 384 KB |
| Instruction Set | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Terminal Count | 144 terminals | 144 terminals | 144 terminals | 144 terminals |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
| Product Family | ATSAMS70Q20B | ATSAMS70Q20B | ATSAMS70Q21B | ATSAMS70Q21B |
| Ordering or Qualification Attributes | AN ordering option | ABT ordering option | AN ordering option | ABT ordering option |
Key Differentiators
- Higher Flash capacity than the target without changing the footprint (vs ATSAMS70Q21B-AN)
- Alternative ordering option with identical core specifications (vs ATSAMS70Q20B-ABT)
- Direct package reuse for memory-expanded designs (vs ATSAMS70Q21B-ABT)
Design Notes
Route each MCU power domain from its supply source through dedicated decoupling branches, and place the associated capacitors close to the package power pins. Keep high-current switching nodes and external transceiver regulators physically separated from sensitive supplies. Confirm capacitor selection, voltage tolerances, and power-up sequencing against the manufacturer electrical-characteristics and layout guidance before releasing the PCB.
Use the exact 144-lead LQFP land pattern for the 20 mm by 20 mm package and verify pin-one orientation against the package drawing. The large pin count leaves little room for routing mistakes, so maintain a component-specific netlist-to-footprint audit. Preserve the manufacturer-recommended solder-mask and paste pattern rather than deriving them from a generic 144-pin library footprint.
Assign peripheral multiplexing and communication signals during schematic design, then avoid changing those assignments late in layout. Keep clock lines short and surrounded by a continuous ground reference, separate Ethernet and other high-speed interfaces from analog inputs, and provide uninterrupted return paths beneath active signal routes. Review each alternate-function pin in the manufacturer pin-description table before releasing fabrication files.
Do not substitute a similarly named SAM S70 orderable part solely because its flash capacity or package looks similar. Verify the complete ordering suffix, 144-lead LQFP dimensions, pin table, temperature grade, qualification attributes, memory layout, and peripheral revision. Also check that the development toolchain and boot configuration support the selected device rather than relying only on the family name.
Compliance Information
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact orderable device.