Microchip Technology

ATTINY84-20MU 20MHz 8KB AVR MCU | Microchip Technology

MPN: ATTINY84-20MU ✓ فعال
2.7 V to 5.5 V Vdss 20-QFN-EP, 4 x 4 mm Package 20 MHz Speed 8 KB (4K x 16 bits) Memory
MOQ: 1 |

ATTINY84-20MU جائزہ

The Microchip Technology ATTINY84-20MU is an 8-bit AVR microcontroller rated for operation up to 20 MHz, with 8 KB of flash program memory, 512 bytes of EEPROM, 512 bytes of SRAM, and a 20-QFN-EP package measuring 4 x 4 mm. The device operates from 2.7 V to 5.5 V and is specified over the -40°C to +85°C temperature range. Its 12 general-purpose I/O lines support compact embedded-control designs requiring substantial flash memory in a small surface-mount footprint.

An 8-bit microcontroller is a microprocessor integrated with memory, peripherals, and I/O in one semiconductor package. The ATtiny84 belongs to the TinyAVR family, which combines the AVR enhanced RISC architecture with low-power operation and a compact pin count. Within the hierarchy of embedded semiconductors, ATtiny84 devices are microcontrollers, controllers, and programmable logic devices commonly used for local sensing, actuation, signal conversion, and system supervision.

Key features include an 8-bit AVR core operating at up to 20 MHz, 8 KB of built-in flash, 512 bytes of EEPROM, 512 bytes of SRAM, 12 general-purpose I/O pins, and an 8-channel 10-bit ADC. Two 8-bit and 16-bit timer/counter sections provide timing and PWM functions, while internal and external interrupt sources support responsive event-driven control. The operating range of 2.7 V to 5.5 V allows use in both 3.3 V and 5 V systems.

The TinyAVR architecture is based on a RISC processor core using 32 general-purpose working registers. The ATTINY84-20MU combines this register-based execution model with on-chip nonvolatile storage and analog conversion, reducing external component count. Its 20-QFN-EP construction supports compact boards, while the exposed-pad package option requires attention to PCB copper and soldering during assembly.

Typical applications include compact sensor nodes, industrial condition-monitoring modules, low-power instrument controls, LED lighting controllers, battery-operated accessories, and small automation products. The 12 I/O lines can connect switches, sensors, indicators, and actuators, while the ADC supports direct measurement of analog inputs. The 8 KB flash capacity is suitable for moderate control logic rather than connectivity-heavy firmware.

PCB design should preserve clean routing around the exposed pad and provide the decoupling and programming access required by the device package. Confirm ADC input ranges, timer outputs, reset behavior, and programming connections against the manufacturer pin description table before layout release. The -40°C to +85°C specification supports industrial-temperature environments, but the finished assembly must also remain within its own thermal limits.

This page combines the ATtiny84 manufacturer specifications, package information, lifecycle status, practical design guidance, and comparison data to support component selection and PCB planning. It also distinguishes exact drop-in options from alternatives that require different memory configurations or package construction.

کے لیے ڈراپ اِن متبادل ATTINY84-20MU — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATTINY84-20MU (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف EEPROM Memory, Flash Memory, PWM Channels, SRAM, Architecture.

Microchip Technology
EEPROM Memory: 128 bytes
Flash Memory: 2 KB (1K x 16 bits)
PWM Channels: 2 per timer/counter
موازنہ کریں ATTINY84-20MU →
Microchip Technology
EEPROM Memory: 256 bytes
Flash Memory: 4 KB (2K x 16 bytes)
PWM Channels: 4 PWM channels
موازنہ کریں ATTINY84-20MU →

ATTINY84A-MU

✅ ڈراپ-اِن
📦 20-QFN-EP (4x4)
Newer ATtiny84A revision in the same 20-QFN-EP footprint; detailed peripheral and errata differences require verification

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATTINY84A-MMH

✅ ڈراپ-اِن
📦 20-QFN-EP (4x4)
Same 20-QFN-EP package family; ordering-code and temperature-grade details differ from ATTINY84A-MU

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATTINY84A-MMHR

✅ ڈراپ-اِن
📦 20-QFN-EP (4x4)
Same 20-QFN-EP package family; reel-ordering and temperature-grade details differ from ATTINY84A-MU

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATTINY84-20MU زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 8-bit AVR Flash Microcontroller
زیادہ سے زیادہ کلاک فریکوئنسی 20 MHz
Flash Memory 8 KB (4K x 16 bits)
EEPROM Memory 512 bytes
SRAM 512 bytes
General-Purpose I/O Pins 12 pins
ADC Resolution 10 bits
ADC Channels 8 channels
Operating Voltage Range 2.7 V to 5.5 V
آپریٹنگ درجہ حرارت رینج -40°C to +85°C
Timer/Counter Sections 2 sections (8-bit and 16-bit)
PWM Channels 2 channels per timer/counter section
General-Purpose Working Registers 32 registers
Programmable Gain Stage 1x and 20x gains
پیکیج 20-QFN-EP, 4 x 4 mm
ماؤنٹنگ ٹائپ Surface Mount
Program Memory Type Built-in Flash
Architecture AVR enhanced RISC
RoHS اسٹیٹس Compliant

ATTINY84-20MU پن کنفیگریشن

VQFN-20 Package Pinout Diagram VQFN-20 (RGW) 5x5mm, P0.5mm, exposed pad 3.3x3.3mm, JEDEC MO-220. Pin 1 top-left, numbered CCW. EP Exposed Pad 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 VQFN-20 (5x5mm)
پن 1 PA0 — General-purpose I/O and ADC input
پن 2 PA1 — General-purpose I/O and ADC input
پن 3 PA2 — General-purpose I/O and ADC input
پن 4 PA3 — General-purpose I/O and ADC input
پن 5 PA4 — General-purpose I/O and ADC input
پن 6 PA5 — General-purpose I/O and ADC input
پن 7 PA6 — General-purpose I/O and ADC input
پن 8 PA7 — General-purpose I/O and ADC input
پن 9 PB0 — General-purpose I/O and timer counter input
پن 10 PB1 — General-purpose I/O and timer counter input
پن 11 PB2 — General-purpose I/O and timer counter output
پن 12 PB3 — General-purpose I/O and timer counter output
پن 13 VCC — Power supply input
پن 14 GND — Ground connection
پن 15 RESET — Active-low reset input
پن 16 AREF — Analog reference input
پن 17 AVCC — Analog power supply input
پن 18 GND — Analog ground connection
پن 19 NC — Not connected (per datasheet)
پن 20 NC — Not connected (per datasheet)

عام استعمالات

ATTINY84-20MU کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Node, Battery-Powered Condition Monitor, LED Lighting Controller, Compact Automation Controller, Battery Charger Controller, Instrumentation and Data Logger.

🏭

Industrial Sensor Node

The ATTINY84-20MU fits compact industrial sensor nodes because it combines an 8-channel, 10-bit ADC, 12 general-purpose I/O lines, and 8 KB of flash in a 4 x 4 mm package. The microcontroller can sample analog sensors, apply filtering or threshold logic, and transmit status through a serial interface while retaining local control capability. Its 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V sensor platforms. At temperatures from -40°C to +85°C, it is suitable for equipment placed outside climate-controlled enclosures. Design the analog front end around the manufacturer ADC input limits, provide local decoupling, and use the 20 MHz clock only when timing and power requirements justify it.

🧩

Battery-Powered Condition Monitor

The ATTINY84-20MU is well suited to battery-powered condition monitoring because its AVR controller combines 512 bytes of EEPROM, 512 bytes of SRAM, and 8 KB of program memory for compact acquisition and control firmware. The 10-bit ADC can evaluate temperature, voltage, or resistive sensor inputs, while timers and interrupts help schedule measurements without continuous polling. Its low-power TinyAVR architecture can remain active for low-duty-cycle sensing and wake for scheduled or event-driven measurements. The 20-QFN-EP footprint also conserves board area in a wearable or remote-monitoring product. Optimize energy use by running the ADC and unused peripherals only during acquisition, and confirm low-power timing and sleep currents against the manufacturer electrical characteristics.

💡

LED Lighting Controller

The ATTINY84-20MU can implement compact LED lighting and dimming controllers through its 12 I/O lines and two timer/counter sections with PWM channels. A 20 MHz clock provides timing resolution for animation, status sequences, and adjustable brightness, while 8 KB of flash is sufficient for control tables and moderate user-interface logic. The 2.7 V to 5.5 V range permits use from a regulated 3.3 V rail or a 5 V supply, subject to LED-driver requirements. PWM outputs should drive transistor or driver stages rather than high-current LED strings directly. Check the I/O drive limits, select a current-limiting circuit, and place the MCU decoupling capacitor close to its supply pins to prevent switching-related voltage disturbance.

🏭

Compact Automation Controller

The ATTINY84-20MU supports small automation modules that must combine logic, analog measurement, and timed outputs in a limited board area. Its 8-bit AVR core and 32 working registers are suitable for sequencing, state machines, and basic process-control algorithms, while the 8-channel 10-bit ADC accepts sensor inputs and two timer/counter sections generate timing or PWM outputs. The 20-QFN-EP, 4 x 4 mm package leaves more board area for power conversion and interfaces than a larger controller. For 24 V industrial systems, use a suitable front-end protection and regulation stage rather than connecting the MCU directly to the bus. Validate logic thresholds, isolation boundaries, output drive topology, and restart behavior before connecting actuators.

⚡

Battery Charger Controller

The ATTINY84-20MU can serve as the supervisory controller in a small battery-charging or power-management module because it combines a 20 MHz control core, 8 KB of flash, ADC inputs, timers, and 12 I/O lines. Firmware can monitor battery voltage, control charge-state indicators, sequence external switching stages, and record thresholds in EEPROM. The 512-byte EEPROM is useful for retaining calibration or operating parameters, while the ADC supports analog supervision; however, a dedicated analog front end remains necessary for accurate current measurement and suitable battery limits. Keep the MCU on a regulated rail protected from charger transients, and verify every maximum and minimum electrical limit in the manufacturer documentation before connecting a cell.

📟

Instrumentation and Data Logger

The ATTINY84-20MU is appropriate for compact instrumentation that records a limited set of measurements and coordinates a serial data link. Its 8-channel 10-bit ADC can acquire several analog channels, and 512 bytes of SRAM supports short acquisition buffers, while 8 KB of flash holds firmware, calibration tables, and a communication protocol. The 20 MHz clock gives sufficient processing headroom for sampled control and framing, and the microcontroller's 12 I/O pins can support status signals, external triggers, and an interface. Storage endurance and write timing should be considered when using EEPROM for frequent logs. Use a serial interface appropriate to the host, define buffer-overrun handling, and preserve a programming route for field upgrades without exposing sensitive test points.

تجویز کردہ پروڈکٹس کا خلاصہ

ATTINY84A-MU Newer ATtiny84-family control option with the same listed package استعمال ہوتا ہے: Industrial Sensor Node, Battery-Powered Condition Monitor, LED Lighting Controller, Compact Automation Controller, Battery Charger Controller, Instrumentation and Data Logger ATTINY44A-MUR Microchip Technology استعمال ہوتا ہے: Industrial Sensor Node, Battery-Powered Condition Monitor, LED Lighting Controller, Compact Automation Controller, Battery Charger Controller, Instrumentation and Data Logger
What is the Microchip ATTINY84-20MU?
The Microchip ATTINY84-20MU is an 8-bit AVR Flash microcontroller with an operating frequency of up to 20 MHz, 8 KB of program memory, 512 bytes of EEPROM, 512 bytes of SRAM, and 12 general-purpose I/O pins. According to the Microchip ATtiny84 product page, the device is part of the low-power TinyAVR family and includes an 8-channel, 10-bit ADC. It is packaged in a compact 20-QFN-EP package measuring 4 x 4 mm.
Where can I download the ATTINY84-20MU datasheet PDF?
The ATTINY84-20MU documentation is reached through the official Microchip ATtiny84 product page, which links to the manufacturer data sheet and supporting device information. Use the pin-description table, electrical characteristics, memory map, and programming sections from that manufacturer document when preparing the PCB and firmware. The product page is also the most appropriate source for notices about newer ATtiny84A devices.
Where can I find the ATTINY84-20MU pinout?
The ATTINY84-20MU pinout is documented in the Microchip ATtiny84 manufacturer data sheet and corresponds to the 20-QFN-EP, 4 x 4 mm package. Use the package pin-description diagram to map PA0 through PA7, PB0 through PB3, RESET, power, ground, analog-reference, and analog-supply functions. Assign PCB tracks from that table because exposed-pad and no-connect locations must follow the exact package drawing.
What are the key specifications of ATTINY84-20MU that engineers should know?
The ATTINY84-20MU combines a 20 MHz maximum clock, 8 KB of flash, 512 bytes each of EEPROM and SRAM, 12 I/O pins, and an 8-channel 10-bit ADC. The Microchip ATtiny84 product page also identifies two timer/counter sections, internal and external interrupts, and a programmable gain stage with 1x and 20x options. Its 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V embedded systems.
What can replace the ATTINY84-20MU?
The ATTINY84A-MU is the closest same-brand replacement identified for the ATTINY84-20MU, with the same 20-QFN-EP package and closely related ATtiny84A functionality. Firmware compatibility still requires checking the manufacturer data sheet, peripheral differences, errata information, and programming requirements. Other ATTINY84A package and ordering options must be checked for exact footprint and pin compatibility before substitution.
Is ATTINY84A-MU the same as ATTINY84-20MU?
The ATTINY84A-MU is a newer ATtiny84-family option with the same 20-QFN-EP, 4 x 4 mm package, but it should not be treated as electrically identical without a device-level review. Microchip identifies ATtiny84A as the newer device for the ATtiny84 family. Compare memory organization, ADC and timer behavior, clock options, electrical limits, and errata before using it in a drop-in production redesign.
ATTINY84-20MU vs ATTINY84A-MU: which is better for a new design?
The ATTINY84A-MU is generally the better starting point for a new design because Microchip identifies it as the newer ATtiny84-family device, while retaining the same 20-QFN-EP, 4 x 4 mm package. The ATTINY84-20MU remains appropriate when an existing qualified design specifically requires that exact ordering code. Compare the current manufacturer documentation, lifecycle terms, errata, and tool support before finalizing either choice.
When should I choose ATTINY84-20MU over ATTINY84A-MU?
Choose the ATTINY84-20MU when maintaining an existing BOM, qualifying a previously released circuit, or reproducing a proven ATtiny84 design where the exact ordering code and firmware behavior are already established. Choose ATTINY84A-MU for a new design when its current device documentation, lifecycle status, peripheral behavior, and tooling satisfy the project requirements. Both options use the listed 20-QFN-EP package, but complete equivalence still requires a detailed comparison.
Is ATTINY84-20MU suitable for a 3.3 V sensor controller?
The ATTINY84-20MU is suitable for a 3.3 V sensor controller because its specified operating voltage range includes 2.7 V to 5.5 V. The 8-channel 10-bit ADC can sample multiple analog inputs, while 12 I/O pins provide connections for sensors and actuators. Keep analog signals within the electrical limits in the manufacturer data sheet and use a suitable regulator with adequate transient performance.
How should I program the ATTINY84-20MU?
Program the ATTINY84-20MU through the programming interface specified in the Microchip ATtiny84 manufacturer documentation. The exact connector, clock arrangement, and ISP pin assignments should follow the data sheet and the selected programmer's instructions. Before committing to a PCB, reserve programming access, provide the required reset behavior, and verify that the chosen programming tool supports the exact device variant.
Can ATTINY84-20MU control LEDs and PWM-driven loads?
The ATTINY84-20MU can control LED indicators and PWM-based loads because it provides 12 general-purpose I/O lines and timer/counter sections with PWM channels. This makes it suitable for status lighting, dimming, fan-speed control, and simple proportional actuators. Check current limits, drive topology, switching frequency, and thermal requirements for every attached load rather than driving high power directly from an I/O pin.
Is ATTINY84-20MU still in production?
Microchip lists the ATtiny84 family as in production and identifies ATTINY84A as a newer device available within that family. The ATTINY84-20MU therefore remains an active catalog choice for exact-match requirements, although new projects should review the newer ATtiny84A family. Confirm the exact ordering code, temperature grade, package, and lifecycle status during production planning.
What is the price of ATTINY84-20MU?
Pricing for the ATTINY84-20MU changes with quantity, availability, and sourcing conditions, so use the Request a Quote form on this page for a current unit quote and volume-break review. The form lets you specify quantity, target price, date-code requirements, and testing requirements. Avoid basing a production BOM on a stale cached marketplace figure when current procurement confirmation is required.
Where can I buy ATTINY84-20MU online?
The ATTINY84-20MU can be requested through the Request a Quote form on this page, where quantity and sourcing conditions can be specified for an actionable response. Current stock, lead time, and MOQ should be confirmed when the quote is returned. The manufacturer lists the ATtiny84 family as in production, but orderable quantity and delivery timing depend on the selected package and order code.
What is the lead time and stock status for ATTINY84-20MU?
Submit the ATTINY84-20MU requirement through the Request a Quote form on this page to obtain current stock, lead-time, and minimum-order details for the exact ordering code. Microchip identifies the ATtiny84 family as in production, which supports ongoing sourcing, but it does not by itself establish warehouse inventory or a shipment date. Include your required quantity and target schedule in the request.
What is the best cross-brand equivalent for ATTINY84-20MU?
No verified cross-brand drop-in equivalent for the ATTINY84-20MU was identified in the available component cross-reference information. An 8-bit AVR replacement must match the 20-QFN-EP footprint, 12-I/O pin mapping, 2.7 V to 5.5 V operating range, memory requirements, timer peripherals, and ADC behavior, not merely the clock frequency. Treat any competitor proposal as a redesign unless its pin mapping and peripheral functions have been validated.

کے لیے انجینئرنگ ریفرنس ڈیٹا ATTINY84-20MU — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ATTINY84-20MU when an existing or space-constrained design requires the exact 8 KB ATtiny84 device at 20 MHz, 12 I/O pins, and an 8-channel 10-bit ADC in a 20-QFN-EP package. It is particularly appropriate for maintaining qualified industrial, sensor, lighting, or battery-powered products where changing device revisions could introduce certification or firmware-validation work. Consider ATTINY84A-MU for a new design because Microchip identifies ATtiny84A as the newer family member; it uses the same listed footprint and retains closely related core resources, but its current electrical characteristics, errata, and peripheral behavior should be reviewed. ATTINY84A-MMH and ATTINY84A-MMHR are additional same-family ordering options that may assist procurement, although each ordering code and temperature grade must be checked against the production requirements.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ATTINY84A-MU ATTINY84A-MMH ATTINY84A-MMHR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-QFN-EP (4x4) 20-QFN-EP (4x4) - same 20-QFN-EP (4x4) - same 20-QFN-EP (4x4) - same
Product Family ATtiny84 ATtiny84A ATtiny84A ATtiny84A
Architecture 8-bit AVR 8-bit AVR 8-bit AVR 8-bit AVR
Flash Memory 8 KB 8 KB 8 KB 8 KB
EEPROM 512 bytes 512 bytes 512 bytes 512 bytes
SRAM 512 bytes 512 bytes 512 bytes 512 bytes
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz

اہم امتیازی خصوصیات

  • Exact ATTINY84 ordering code with 8 KB of flash (بمقابلہATTINY84A-MU)
  • 20 MHz operation in a compact 4 x 4 mm package (بمقابلہATTINY84A-MU)
  • 12 I/O pins and an 8-channel 10-bit ADC (بمقابلہATTINY84A-MMHR)

ڈیزائن نوٹس

Place the decoupling capacitor immediately between the VCC and GND pins, with a short return path and minimal loop area. Connect analog decoupling at AVCC and maintain a clean AREF network. Keep switching-node and high-current load paths away from ADC inputs because the 10-bit converter can be sensitive to supply ripple and common-mode disturbance.

Allocate exposed-pad copper according to the manufacturer land-pattern and assembly requirements. Use the package drawing to distinguish the electrical ground pad from any additional package terminals, and verify the stencil and solder-paste design with the contract manufacturer. Uneven exposed-pad soldering can create thermal voids and assembly stress in the 4 x 4 mm QFN package.

Do not treat ATTINY84 and ATTINY84A ordering codes as interchangeable without checking the current manufacturer documentation. Review ADC channels, timer resources, clock options, interrupt behavior, electrical characteristics, errata, and programming requirements. A matching package and 20 MHz clock rating alone do not establish complete firmware or peripheral compatibility.

Select the operating rail so that it remains within 2.7 V to 5.5 V, including transient excursions. For battery systems, verify the minimum regulator output during load changes and prevent deep discharge from pulling the MCU rail below its operating limit. Use the manufacturer sleep and active-current characteristics to estimate battery life rather than relying on nominal clock speed alone.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

RoHS compliance is identified in the component listing. The ATtiny84 is an industrial and general-purpose microcontroller, so AEC-Q100 qualification is not applicable.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

attiny84 pinout attiny84 datasheet attiny84 programmer attiny84 price attiny84 vs attiny85 attiny84 programming attiny84 projects attiny84 arduino pinout attiny84 development board ATTINY84-20MU datasheet ATTINY84-20MU pinout ATTINY84-20MU equivalent ATTINY84-20MU replacement ATTINY84-20MU vs ATTINY84A-MU ATTINY84-20MU price

متعلقہ اجزاء اور اصطلاحات

Microchip Technology ATTINY84-20MU ATTINY84 ATTINY84A-MU ATTINY84A-MMH ATTINY84A-MMHR ATTINY44A-MUR AVR TinyAVR 8-bit microcontroller RISC architecture embedded controller semiconductor 20-QFN-EP QFN family surface mount SMD package flash memory EEPROM SRAM 10-bit ADC PWM timer/counter RoHS industrial control
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں