Microchip Technology

ATXMEGA128B3-AN 32MHz 128KB MCU | Microchip Technology

MPN: ATXMEGA128B3-AN ✓ فعال
1.6 V to 3.6 V Vdss 64-pin TQFP, 10 mm x 10 mm class Package 32 MHz Speed 128 KB Memory
MOQ: 1 |

ATXMEGA128B3-AN جائزہ

Microchip Technology ATXMEGA128B3-AN is a low-power 8/16-bit AVR XMEGA microcontroller operating at up to 32 MHz with up to 32 MIPS throughput, 128 KB of self-programmable flash, 4 KB of SRAM, and 2048 bytes of EEPROM in a 64-pin TQFP package. The industrial-temperature ATXMEGA128B3-AN supports a 1.6 V to 3.6 V supply range and operation from -40°C to +105°C.

An 8/16-bit AVR microcontroller is a compact embedded-processing device that combines a RISC instruction set, nonvolatile program memory, data memory, timers, communication peripherals, and interrupt handling on one integrated circuit. Within the product hierarchy, the ATXMEGA belongs to the AVR family of 8-bit microcontrollers, the XMEGA series of high-performance 8/16-bit devices, and the broader embedded semiconductor and embedded-control product category.

The ATXMEGA128B3 provides 128 KB of in-system self-programmable flash with read-while-write capability, a separate 4 KB boot-code section, 4 KB of SRAM, and 2048 bytes of internal EEPROM. Its integrated peripherals include a two-channel DMA controller, a four-channel event system, a USB full-speed device interface, and an LCD controller supporting as many as 4 by 25 segments. These resources reduce external component requirements in connected control and human-interface designs.

The device operates at up to 32 MHz and delivers up to 32 MIPS throughput. Its architecture combines deterministic interrupt handling, direct peripheral access, and hardware event routing with general-purpose processing. The DMA controller can transfer data without continuous CPU intervention, while the event system can connect timer, comparator, and other peripheral events, improving responsiveness in control systems where several timing-sensitive inputs must be coordinated.

Typical applications include USB-connected data acquisition, industrial control panels, compact human-interface devices, programmable logic controllers, sensing instruments, and communications equipment. The USB full-speed device interface is particularly useful for a compact peripheral that must exchange configuration or measurement data with a host computer while keeping the MCU operating from a single low-voltage supply.

PCB design should follow the manufacturer's package drawing and pin-description tables exactly. Place decoupling capacitors close to the supply pins, preserve the required signal and return paths around USB and high-speed peripherals, and program the operating frequency, clock source, brownout behavior, and peripheral pins through the device's configuration and fuse mechanisms.

This page combines manufacturer feature data, package and application guidance, comparison criteria, and drop-in replacement analysis to support faster engineering selection. It is intended to answer the practical questions that arise after identifying the correct controller family: memory capacity, interface availability, temperature range, package compatibility, and PCB reuse.

کے لیے ڈراپ اِن متبادل ATXMEGA128B3-AN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

ATXMEGA128B3-AU

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 TQFP-64
Uses the same 64-pin TQFP ATxmega128B3 architecture, but the lower-temperature grade is approximately 20°C below the ATXMEGA128B3-AN maximum of +105°C

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATXMEGA128B3-AH

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 TQFP-64
Uses the same 64-pin TQFP ATxmega128B3 architecture, but the temperature-grade suffix differs from the ATXMEGA128B3-AN 105°C option

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATXMEGA128B3-ANR

✅ ڈراپ-اِن
📦 TQFP-64
Electrical and temperature ratings match the ATXMEGA128B3-AN, while reel-oriented production packaging changes the handling format rather than the die or pin configuration

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATXMEGA128B3-AN زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 8/16-bit RISC microcontroller
Architecture AVR XMEGA
زیادہ سے زیادہ کلاک فریکوئنسی 32 MHz
Maximum Throughput 32 MIPS
Program Flash Memory 128 KB
Boot Code Section 4 KB
SRAM 4 KB
EEPROM 2048 bytes
DMA Channels 2 channels
Event System Channels 4 channels
USB Interface Full-speed device
LCD Controller Capacity 4 x 25 segments
General-Purpose I/O 36 lines
Operating Voltage Range 1.6 V to 3.6 V
آپریٹنگ درجہ حرارت رینج -40°C to +105°C
ADC Resolution 12 bits
پیکیج 64-pin TQFP, 10 mm x 10 mm class
ماؤنٹنگ ٹائپ Surface mount
Programming Interface In-system programmable
Read-While-Write Flash Supported

ATXMEGA128B3-AN 64-pin tqfp, 10 mm x 10 mm class پن کنفیگریشن گائیڈ

ATXMEGA128B3-AN (64-pin tqfp, 10 mm x 10 mm class پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

ATXMEGA128B3-AN کے لیے 64-pin tqfp, 10 mm x 10 mm class پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATXMEGA128B3-AN.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ATXMEGA128B3-AN کے لیے موزوں ہے 6 ایپلیکیشنs: USB Connected Data Acquisition, Industrial Control Panel, Human Interface Display, Battery-Powered Sensing Node, Programmable Logic Controller, Communication Gateway.

🔧

USB Connected Data Acquisition

The ATXMEGA128B3-AN fits a compact USB data-acquisition controller because it combines a full-speed USB device interface with a 12-bit ADC, two-channel DMA controller, and up to 32 MIPS of processing throughput. The 128 KB of self-programmable flash provides room for USB firmware, calibration algorithms, and communication protocols, while 4 KB of SRAM supports buffered acquisition and data processing. Placing the MCU between the analog front end and USB connector allows measured data to move toward the host with reduced CPU intervention. Designers should provide signal conditioning, input protection, reference-voltage management, compliant USB routing, and decoupling based on the manufacturer datasheet.

🏭

Industrial Control Panel

The ATXMEGA128B3-AN is well suited to an industrial control panel with local display, operator input, and a wired host interface. Its LCD controller supports up to 4 by 25 segments, allowing a designer to drive a display directly rather than relying on a separate display controller. The four-channel event system can coordinate timers, comparator events, and other peripherals, while DMA supports efficient background transfers. Operating from 1.6 V to 3.6 V and across -40°C to +105°C supports compact low-voltage electronics in industrial environments. The enclosure should still control condensation, conductive dust, ESD exposure, and temperature extremes beyond the component rating.

📺

Human Interface Display

ATXMEGA128B3-AN can serve as the central controller in a segment-based human-interface display because it integrates an LCD controller capable of driving 4 by 25 segments. The 128 KB flash accommodates menu logic, animation state, calibration, and communication firmware, while the event system helps connect button, timer, and peripheral activity without excessive polling. At up to 32 MHz and 32 MIPS throughput, the AVR XMEGA core provides responsive control for status pages and parameter entry. A practical implementation should account for LCD bias voltage, glass timing, contrast adjustment, backlighting, ESD protection on exposed controls, and the current profile of the selected display and interface circuitry.

🧩

Battery-Powered Sensing Node

The ATXMEGA128B3-AN is appropriate for a battery-powered sensing node when low-voltage operation, flexible memory, and integrated event handling are important. Its 1.6 V to 3.6 V supply range supports compact power architectures, while self-programmable flash permits field firmware updates and the 2048-byte EEPROM can retain calibration values. The two-channel DMA controller and four-channel event system help move sensor data and respond to timed events with predictable peripheral behavior. To maximize battery life, the firmware should use the MCU's low-power modes, disable unused peripherals, and schedule acquisition through timers. The external sensor, regulator, and communications stage may dominate the final current budget, so quiescent current must be measured at the complete-board level.

⚡

Programmable Logic Controller

The ATXMEGA128B3-AN can form the core of a compact programmable logic controller because it combines deterministic event handling, DMA, extensive timer resources, 36 general-purpose I/O lines, and 128 KB of program memory. The event system allows timer and peripheral events to be linked directly, reducing the latency of repetitive scanning tasks, while DMA offloads transfers between memory and peripherals. Its -40°C to +105°C grade is suitable for many industrial controller installations, and the 64-pin TQFP provides enough I/O for field inputs and outputs. For safety-critical machinery, use the MCU only within a properly validated control architecture and add the required isolation, watchdog, fault handling, and independent shutdown functions.

🌐

Communication Gateway

The ATXMEGA128B3-AN can implement a compact communications gateway that bridges a low-speed serial interface to USB while maintaining deterministic control behavior. Its 128 KB flash can store protocol stacks, device configuration, diagnostics, and firmware-update logic, and the DMA controller can buffer transfers to reduce interrupt overhead. The USB full-speed device interface provides a standard host connection, while the event system supports timing between protocol transactions and application tasks. Designers should select a communication peripheral and pin assignment compatible with the target protocol, isolate external lines where required, and protect connector inputs from industrial transients. USB bus-power limits and the chosen transceiver or communication device must be considered in the overall power budget.

What are the key specifications of ATXMEGA128B3-AN that engineers should know?
The ATXMEGA128B3-AN combines a 32 MHz AVR XMEGA core with 128 KB of flash, 4 KB of SRAM, 2048 bytes of EEPROM, USB full-speed device support, DMA, an event system, and a 4-by-25-segment LCD controller. According to the Microchip ATxmega128B3 and ATxmega64B3 datasheet, it reaches up to 32 MIPS and operates across 1.6 V to 3.6 V in the industrial -40°C to +105°C range. The 64-pin TQFP package is intended for compact embedded and human-interface systems.
What is the operating voltage of ATXMEGA128B3-AN?
The ATXMEGA128B3-AN operates from 1.6 V to 3.6 V. According to the Microchip ATxmega128B3 and ATxmega64B3 datasheet, this range supports low-voltage embedded designs while accommodating 1.8 V, 2.5 V, and 3.3 V systems. The selected operating voltage must also satisfy the requirements of the internal clock, USB interface, ADC, LCD controller, and external peripherals. Use the manufacturer power-supply and decoupling guidance when planning the board-level supply.
How much memory does ATXMEGA128B3-AN contain?
The ATXMEGA128B3-AN contains 128 KB of self-programmable flash, a 4 KB boot-code section, 4 KB of SRAM, and 2048 bytes of EEPROM. According to the Microchip ATxmega128B3 and ATxmega64B3 datasheet, the flash supports read-while-write operation, enabling firmware data to be updated while selected program areas continue executing. The separate boot section supports controlled startup and bootloader workflows, while EEPROM provides nonvolatile storage for calibration or configuration data.
What peripherals are integrated into ATXMEGA128B3-AN?
The ATXMEGA128B3-AN integrates a two-channel DMA controller, a four-channel event system, a USB full-speed device interface, a 4-by-25-segment LCD controller, a 12-bit ADC, timers, and communication peripherals. According to the Microchip ATxmega128B3 and ATxmega64B3 datasheet, DMA reduces CPU involvement during data transfers, while the event system routes events directly among peripherals. These resources are useful in acquisition, display, and control products that need deterministic timing without many external devices.
Where can I download the ATXMEGA128B3-AN datasheet PDF?
The manufacturer datasheet PDF is available at the Microchip document URL listed in the datasheet field on this page. It is titled for the ATxmega128B3 and ATxmega64B3 family and covers electrical characteristics, package information, peripherals, memory organization, and programming guidance. Engineers should also consult the device-specific pin description and package drawings because the ATXMEGA128B3-AN ordering code identifies the 64-pin TQFP, 105°C configuration.
Where can I find the ATXMEGA128B3-AN pinout?
The ATXMEGA128B3-AN pinout is found in the pin-description table and package drawing in the Microchip ATxmega128B3 and ATxmega64B3 datasheet. The target is a 64-pin TQFP device with 36 general-purpose I/O lines, while its remaining assignments include power, clock, reset, programming, communications, and peripheral functions. Use the package drawing rather than a generic TQFP-64 diagram when assigning PCB nets because exposed-pad and thermal requirements must also be checked for the exact ordering option.
Can ATXMEGA128B3-AN be used for a USB data-acquisition device?
Yes, the ATXMEGA128B3-AN is suitable for a compact USB data-acquisition device because it integrates a full-speed USB device interface, a 12-bit ADC, DMA, and 128 KB of program flash. According to the Microchip ATxmega128B3 and ATxmega64B3 datasheet, the DMA controller can move sampled data with reduced CPU intervention. The design must still provide compliant USB routing, power supervision, input protection, analog conditioning, and firmware for the USB enumeration and transfer protocol.
ATXMEGA128B3-AN vs ATXMEGA128B3-AU — which is better for industrial use?
Choose ATXMEGA128B3-AN when the assembly must be rated for operation from -40°C to +105°C; the ATXMEGA128B3-AU is the lower-temperature option. Both belong to the same ATxmega128B3 device family and use the 64-pin TQFP class of package, but their temperature grades affect where they may be deployed. For industrial equipment near heat sources, outdoor controls, or automotive-like ambient conditions, verify the exact suffix and complete operating-temperature specification before releasing the BOM.
What is the difference between ATXMEGA128B3-AN and ATXMEGA128B3-AH?
The principal distinction is the device temperature grade: the ATXMEGA128B3-AN is identified for -40°C to +105°C operation, while the ATXMEGA128B3-AH occupies the lower-temperature ordering option. Both use the 64-pin TQFP configuration and provide the same core memory and peripheral architecture at the family level. Exact pinout, clock, electrical-limit, and ordering details must still be checked in the manufacturer documentation for the selected suffix before treating one as a drop-in replacement.
When should I choose ATXMEGA128B3-AN instead of another XMEGA controller?
Choose the ATXMEGA128B3-AN when a design needs 128 KB of flash, 4 KB of SRAM, USB full-speed device connectivity, DMA, an event system, an LCD controller, and operation from -40°C to +105°C. The 64-pin TQFP provides ample peripheral connectivity for a human-interface or industrial controller. Select a lower-memory member when 128 KB of flash is unnecessary, or a different package when board density, routing, or production packaging requirements cannot be met.
What can replace ATXMEGA128B3-AN on an existing PCB?
The closest same-package replacement is a compatible ATxmega128B3 64-pin TQFP ordering option with the required temperature grade, such as ATXMEGA128B3-AU or ATXMEGA128B3-AH. A drop-in decision also requires identical pin assignment, supply range, clock configuration, peripheral availability, boot behavior, and fuse compatibility. Because the manufacturer lists ATXMEGA128B3-AN for -40°C to +105°C operation, do not substitute a lower-temperature grade without confirming the enclosure's worst-case ambient temperature.
Is ATXMEGA128B3-AU the same as ATXMEGA128B3-AN?
No, the two order codes are not fully interchangeable because their temperature grades differ. The ATXMEGA128B3-AN supports -40°C to +105°C, whereas ATXMEGA128B3-AU is associated with the lower-temperature grade. Their common family architecture and 64-pin TQFN/TQFP-class mechanical arrangement make a board-level substitution mechanically possible, but firmware, fuse settings, production markings, and environmental requirements must be reviewed before approval.
What is the best drop-in replacement for ATXMEGA128B3-AN?
The best replacement is the ATxmega128B3 64-pin TQFP ordering option whose electrical limits, temperature grade, pin definitions, and fuse configuration match the original design. ATXMEGA128B3-AU and ATXMEGA128B3-AH are candidates to evaluate mechanically, but ATXMEGA128B3-AU may not satisfy a 105°C requirement and ATXMEGA128B3-AH may have a different grade or marking. The manufacturer datasheet and the original schematic must be used for the final qualification decision.
Where can I buy ATXMEGA128B3-AN online?
Use the Request a Quote form on this page to request ATXMEGA128B3-AN availability, unit pricing, and lead time for the exact 64-pin TQFP ordering code. The listing identifies the part as an industrial-temperature Microchip Technology microcontroller, but procurement should confirm stock, factory packaging, and delivery rather than assuming that a related -MCU tray variant is interchangeable. Include the required quantity and target assembly location in the request for an actionable quotation.
What is the price of ATXMEGA128B3-AN?
Current commercial pricing for ATXMEGA128B3-AN should be obtained through the Request a Quote form on this page. The form captures the exact MPN, quantity, package, and delivery requirements needed for a current quotation. Avoid treating a price shown for ATXMEGA128B3-MCU or another package variant as pricing for ATXMEGA128B3-AN, because the -AN ordering code and its 64-pin TQFP configuration are distinct procurement requirements.
What is the lead time for ATXMEGA128B3-AN?
The current lead time for ATXMEGA128B3-AN should be requested through the Request a Quote form on this page using the exact MPN and required quantity. Lead time can vary with order quantity, factory packaging, component availability, and the distributor's allocation status. Do not infer availability from a related ATXMEGA128B3-MCU listing because that ordering code identifies a different package and purchasing configuration.
Is ATXMEGA128B3-AN in stock?
ATXMEGA128B3-AN availability should be confirmed through the Request a Quote form on this page. Submit the exact MPN, required quantity, and preferred packaging so the current stock position and delivery schedule can be checked for the correct 64-pin TQFP device. A separate -MCU listing cannot establish the stock status of -AN because changing the ordering suffix can change the package, temperature grade, or production packaging.
Is ATXMEGA128B3-AN suitable for industrial control-panel applications?
The ATXMEGA128B3-AN is suitable for industrial control-panel applications requiring -40°C to +105°C operation, local display control, event handling, and USB connectivity. Its LCD controller supports up to 4 by 25 segments, while DMA and the event system help coordinate peripheral activity. The controller should be paired with suitable display drivers, ESD protection, power regulation, communication isolation where required, and enclosure temperature management appropriate to the installation environment.
What is the best Microchip equivalent for ATXMEGA128B3-AN?
The best Microchip equivalent is another ATxmega128B3 ordering option in the same 64-pin TQFP configuration whose temperature grade and fuse-compatible behavior satisfy the application. ATXMEGA128B3-AU and ATXMEGA128B3-AH are the relevant family candidates for comparison, but neither should be approved as a universal substitute because the ATXMEGA128B3-AN is specified for -40°C to +105°C. Review the package drawing, pin table, clock setup, brownout settings, and application temperature before procurement.

کے لیے انجینئرنگ ریفرنس ڈیٹا ATXMEGA128B3-AN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ATXMEGA128B3-AN for embedded products that need 128 KB of self-programmable flash, 4 KB of SRAM, USB full-speed device connectivity, DMA, event-driven peripheral control, an LCD controller, and an industrial -40°C to +105°C temperature range. It is especially appropriate for compact data-acquisition units, industrial human-interface panels, and programmable controllers with several timing-sensitive peripherals. ATXMEGA128B3-AU may be preferable when a lower ambient-temperature grade is sufficient, but it must satisfy the finished product's thermal requirements. ATXMEGA128B3-AH can be evaluated when its ordering temperature grade matches the application. ATXMEGA128B3-ANR provides the same core device in reel-oriented production packaging, which can simplify high-volume assembly. Before approving any replacement, verify the 64-pin TQFP footprint, every assigned pin, voltage range, clock source, boot configuration, fuse settings, and worst-case enclosure temperature.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ATXMEGA128B3-AU ATXMEGA128B3-AH ATXMEGA128B3-ANR
Package TQFP-64 TQFP-64 TQFP-64 TQFP-64
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Maximum Throughput 32 MIPS 32 MIPS 32 MIPS 32 MIPS
Program Flash Memory 128 KB 128 KB 128 KB 128 KB
SRAM 4 KB 4 KB 4 KB 4 KB
EEPROM 2048 bytes 2048 bytes 2048 bytes 2048 bytes
Operating Voltage Range 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V
USB Interface Full-speed device Full-speed device Full-speed device Full-speed device

اہم امتیازی خصوصیات

  • Industrial temperature capability (بمقابلہATXMEGA128B3-AU)
  • Integrated USB and event-driven control resources (بمقابلہATXMEGA128B3-AH)
  • Memory and peripheral integration (بمقابلہATXMEGA128B3-ANR)

ڈیزائن نوٹس

Design the 1.6 V to 3.6 V supply rail so that its startup, steady-state, and transient behavior satisfy every operating mode of the ATXMEGA128B3-AN. Place the manufacturer-recommended bypass capacitors at the supply pins with short ground returns, and avoid sharing a narrow return path between the MCU, USB interface, and switching peripherals. If the system uses USB bus power, account for inrush, cable transients, and the device's operating-current profile instead of sizing only for average current.

Use the exact 64-pin package drawing and pin-description table from the Microchip ATxmega128B3 and ATxmega64B3 datasheet when laying out the PCB. Preserve the clock-loop geometry, keep USB differential routing symmetrical, provide a continuous ground reference, and route high-current or switching outputs away from ADC and communication inputs. The component exposes many multifunction pins, so assigning alternate functions early prevents later routing changes that could compromise signal integrity or board-area efficiency.

Do not treat the -AN and -MCU order codes as interchangeable without checking the package drawing: the target is the 64-pin TQFP configuration, whereas ATXMEGA128B3-MCU is identified as a 64-pin VQFN. Also verify clock, boot, brownout, and fuse settings before updating a board with ATXMEGA128B3-AU or ATXMEGA128B3-AH, because the suffix differences can represent temperature grade or production-packaging distinctions even when the core architecture is the same.

For USB operation, follow the manufacturer's layout guidance for the USB data lines, series impedance, pull-up placement, and ground return. For analog measurement, use a separate quiet return path where practical and keep switching regulators, digital clocks, and high-current outputs away from the ADC inputs. The ATXMEGA128B3-AN includes a 12-bit ADC, but input conditioning, reference stability, sampling time, and board-level noise filtering determine whether that resolution is useful in the finished acquisition circuit.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The 105°C industrial-temperature marking is stated by the product listing, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited material.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ATXMEGA128B3-AN datasheet ATXMEGA128B3-AN pinout ATXMEGA128B3-AN specifications ATXMEGA128B3-AN datasheet pdf ATXMEGA128B3-AN TQFP-64 ATXMEGA128B3-AN 128KB flash ATXMEGA128B3-AN 32MHz ATXMEGA128B3-AN USB full speed ATXMEGA128B3-AN equivalent ATXMEGA128B3-AN replacement ATXMEGA128B3-AN vs ATXMEGA128B3-AU ATXMEGA128B3-AN price ATXMEGA128B3-AN stock Microchip ATXMEGA128B3-AN ATXMEGA128B3-AN industrial control panel

متعلقہ اجزاء اور اصطلاحات

Microchip Technology ATXMEGA128B3-AN ATXMEGA128B3-AU ATXMEGA128B3-AH ATXMEGA128B3-ANR ATxmega128B3 AVR AVR XMEGA 8/16-bit microcontroller RISC microcontroller embedded controller semiconductor self-programmable flash read-while-write SRAM EEPROM Direct Memory Access DMA controller event system USB full-speed device LCD controller 12-bit ADC TQFP-64 surface mount industrial temperature grade
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں