ATXMEGA128B3-AN 32MHz 128KB MCU | Microchip Technology
MPN: ATXMEGA128B3-AN ✓ AktifATXMEGA128B3-AN Genel Bakış
An 8/16-bit AVR microcontroller is a compact embedded-processing device that combines a RISC instruction set, nonvolatile program memory, data memory, timers, communication peripherals, and interrupt handling on one integrated circuit. Within the product hierarchy, the ATXMEGA belongs to the AVR family of 8-bit microcontrollers, the XMEGA series of high-performance 8/16-bit devices, and the broader embedded semiconductor and embedded-control product category.
The ATXMEGA128B3 provides 128 KB of in-system self-programmable flash with read-while-write capability, a separate 4 KB boot-code section, 4 KB of SRAM, and 2048 bytes of internal EEPROM. Its integrated peripherals include a two-channel DMA controller, a four-channel event system, a USB full-speed device interface, and an LCD controller supporting as many as 4 by 25 segments. These resources reduce external component requirements in connected control and human-interface designs.
The device operates at up to 32 MHz and delivers up to 32 MIPS throughput. Its architecture combines deterministic interrupt handling, direct peripheral access, and hardware event routing with general-purpose processing. The DMA controller can transfer data without continuous CPU intervention, while the event system can connect timer, comparator, and other peripheral events, improving responsiveness in control systems where several timing-sensitive inputs must be coordinated.
Typical applications include USB-connected data acquisition, industrial control panels, compact human-interface devices, programmable logic controllers, sensing instruments, and communications equipment. The USB full-speed device interface is particularly useful for a compact peripheral that must exchange configuration or measurement data with a host computer while keeping the MCU operating from a single low-voltage supply.
PCB design should follow the manufacturer's package drawing and pin-description tables exactly. Place decoupling capacitors close to the supply pins, preserve the required signal and return paths around USB and high-speed peripherals, and program the operating frequency, clock source, brownout behavior, and peripheral pins through the device's configuration and fuse mechanisms.
This page combines manufacturer feature data, package and application guidance, comparison criteria, and drop-in replacement analysis to support faster engineering selection. It is intended to answer the practical questions that arise after identifying the correct controller family: memory capacity, interface availability, temperature range, package compatibility, and PCB reuse.
Drop-in alternatifler için ATXMEGA128B3-AN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
ATXMEGA128B3-AU
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
ATXMEGA128B3-AH
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
ATXMEGA128B3-ANR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ATXMEGA128B3-AN Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 8/16-bit RISC microcontroller |
| Architecture | AVR XMEGA |
| Azami Saat Hızı | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Program Flash Memory | 128 KB |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 2048 bytes |
| DMA Channels | 2 channels |
| Event System Channels | 4 channels |
| USB Interface | Full-speed device |
| LCD Controller Capacity | 4 x 25 segments |
| General-Purpose I/O | 36 lines |
| Operating Voltage Range | 1.6 V to 3.6 V |
| İşletim Sıcaklığı Aralığı | -40°C to +105°C |
| ADC Resolution | 12 bits |
| Paket | 64-pin TQFP, 10 mm x 10 mm class |
| Montaj Türü | Surface mount |
| Programming Interface | In-system programmable |
| Read-While-Write Flash | Supported |
ATXMEGA128B3-AN 64-pin tqfp, 10 mm x 10 mm class Pin Yapısı Kılavuzu
ATXMEGA128B3-AN (64-pin tqfp, 10 mm x 10 mm class paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ATXMEGA128B3-AN.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ATXMEGA128B3-AN için uygundur 6 uygulamas: USB Connected Data Acquisition, Industrial Control Panel, Human Interface Display, Battery-Powered Sensing Node, Programmable Logic Controller, Communication Gateway.
USB Connected Data Acquisition
The ATXMEGA128B3-AN fits a compact USB data-acquisition controller because it combines a full-speed USB device interface with a 12-bit ADC, two-channel DMA controller, and up to 32 MIPS of processing throughput. The 128 KB of self-programmable flash provides room for USB firmware, calibration algorithms, and communication protocols, while 4 KB of SRAM supports buffered acquisition and data processing. Placing the MCU between the analog front end and USB connector allows measured data to move toward the host with reduced CPU intervention. Designers should provide signal conditioning, input protection, reference-voltage management, compliant USB routing, and decoupling based on the manufacturer datasheet.
Önerilen
Industrial Control Panel
The ATXMEGA128B3-AN is well suited to an industrial control panel with local display, operator input, and a wired host interface. Its LCD controller supports up to 4 by 25 segments, allowing a designer to drive a display directly rather than relying on a separate display controller. The four-channel event system can coordinate timers, comparator events, and other peripherals, while DMA supports efficient background transfers. Operating from 1.6 V to 3.6 V and across -40°C to +105°C supports compact low-voltage electronics in industrial environments. The enclosure should still control condensation, conductive dust, ESD exposure, and temperature extremes beyond the component rating.
Önerilen
Human Interface Display
ATXMEGA128B3-AN can serve as the central controller in a segment-based human-interface display because it integrates an LCD controller capable of driving 4 by 25 segments. The 128 KB flash accommodates menu logic, animation state, calibration, and communication firmware, while the event system helps connect button, timer, and peripheral activity without excessive polling. At up to 32 MHz and 32 MIPS throughput, the AVR XMEGA core provides responsive control for status pages and parameter entry. A practical implementation should account for LCD bias voltage, glass timing, contrast adjustment, backlighting, ESD protection on exposed controls, and the current profile of the selected display and interface circuitry.
Önerilen
Battery-Powered Sensing Node
The ATXMEGA128B3-AN is appropriate for a battery-powered sensing node when low-voltage operation, flexible memory, and integrated event handling are important. Its 1.6 V to 3.6 V supply range supports compact power architectures, while self-programmable flash permits field firmware updates and the 2048-byte EEPROM can retain calibration values. The two-channel DMA controller and four-channel event system help move sensor data and respond to timed events with predictable peripheral behavior. To maximize battery life, the firmware should use the MCU's low-power modes, disable unused peripherals, and schedule acquisition through timers. The external sensor, regulator, and communications stage may dominate the final current budget, so quiescent current must be measured at the complete-board level.
Önerilen
Programmable Logic Controller
The ATXMEGA128B3-AN can form the core of a compact programmable logic controller because it combines deterministic event handling, DMA, extensive timer resources, 36 general-purpose I/O lines, and 128 KB of program memory. The event system allows timer and peripheral events to be linked directly, reducing the latency of repetitive scanning tasks, while DMA offloads transfers between memory and peripherals. Its -40°C to +105°C grade is suitable for many industrial controller installations, and the 64-pin TQFP provides enough I/O for field inputs and outputs. For safety-critical machinery, use the MCU only within a properly validated control architecture and add the required isolation, watchdog, fault handling, and independent shutdown functions.
Önerilen
Communication Gateway
The ATXMEGA128B3-AN can implement a compact communications gateway that bridges a low-speed serial interface to USB while maintaining deterministic control behavior. Its 128 KB flash can store protocol stacks, device configuration, diagnostics, and firmware-update logic, and the DMA controller can buffer transfers to reduce interrupt overhead. The USB full-speed device interface provides a standard host connection, while the event system supports timing between protocol transactions and application tasks. Designers should select a communication peripheral and pin assignment compatible with the target protocol, isolate external lines where required, and protect connector inputs from industrial transients. USB bus-power limits and the chosen transceiver or communication device must be considered in the overall power budget.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ATXMEGA128B3-AN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ATXMEGA128B3-AU | ATXMEGA128B3-AH | ATXMEGA128B3-ANR |
|---|---|---|---|---|
| Package | TQFP-64 | TQFP-64 | TQFP-64 | TQFP-64 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Maximum Throughput | 32 MIPS | 32 MIPS | 32 MIPS | 32 MIPS |
| Program Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 2048 bytes | 2048 bytes | 2048 bytes | 2048 bytes |
| Operating Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| USB Interface | Full-speed device | Full-speed device | Full-speed device | Full-speed device |
Ana Farklılayıcılar
- Industrial temperature capability (karşılaştırma:ATXMEGA128B3-AU)
- Integrated USB and event-driven control resources (karşılaştırma:ATXMEGA128B3-AH)
- Memory and peripheral integration (karşılaştırma:ATXMEGA128B3-ANR)
Tasarım Notları
Design the 1.6 V to 3.6 V supply rail so that its startup, steady-state, and transient behavior satisfy every operating mode of the ATXMEGA128B3-AN. Place the manufacturer-recommended bypass capacitors at the supply pins with short ground returns, and avoid sharing a narrow return path between the MCU, USB interface, and switching peripherals. If the system uses USB bus power, account for inrush, cable transients, and the device's operating-current profile instead of sizing only for average current.
Use the exact 64-pin package drawing and pin-description table from the Microchip ATxmega128B3 and ATxmega64B3 datasheet when laying out the PCB. Preserve the clock-loop geometry, keep USB differential routing symmetrical, provide a continuous ground reference, and route high-current or switching outputs away from ADC and communication inputs. The component exposes many multifunction pins, so assigning alternate functions early prevents later routing changes that could compromise signal integrity or board-area efficiency.
Do not treat the -AN and -MCU order codes as interchangeable without checking the package drawing: the target is the 64-pin TQFP configuration, whereas ATXMEGA128B3-MCU is identified as a 64-pin VQFN. Also verify clock, boot, brownout, and fuse settings before updating a board with ATXMEGA128B3-AU or ATXMEGA128B3-AH, because the suffix differences can represent temperature grade or production-packaging distinctions even when the core architecture is the same.
For USB operation, follow the manufacturer's layout guidance for the USB data lines, series impedance, pull-up placement, and ground return. For analog measurement, use a separate quiet return path where practical and keep switching regulators, digital clocks, and high-current outputs away from the ADC inputs. The ATXMEGA128B3-AN includes a 12-bit ADC, but input conditioning, reference stability, sampling time, and board-level noise filtering determine whether that resolution is useful in the finished acquisition circuit.
Uyumluluk Bilgisi
The 105°C industrial-temperature marking is stated by the product listing, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited material.