ATXMEGA64A1U-CU - 32MHz 64KB USB Microcontroller | Microchip
MPN: ATXMEGA64A1U-CU ✓ فعالATXMEGA64A1U-CU جائزہ
An 8/16-bit AVR microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, data memory, and peripherals in one device. The XMEGA A1U family belongs to the hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor ICs. Its multi-channel DMA controller, event system, external bus interface, and USB capability make it suitable for connected embedded-control equipment.
Key features include 64 KB of Flash organized as 32K x 16, a separate 4 KB boot-code section, 4 KB of SRAM, and 2 KB of EEPROM. The device operates from 1.6 V to 3.6 V at up to 32 MHz. A 4-channel DMA controller transfers data without continuous processor intervention, while the 8-channel event system links peripherals through hardware events and reduces software timing overhead.
The A1U architecture combines an 8-bit AVR instruction set with hardware support for efficient 16-bit operations. Its peripheral set includes an external bus interface for communication with external memory or peripheral devices. The USB-enabled A1U designation supports designs that require wired USB connectivity in addition to the standard serial and timer resources found in an embedded MCU.
Typical uses include industrial automation controllers, USB-connected data-acquisition units, low-power sensor hubs, communications equipment, and compact consumer products. The 100-CBGA package supports dense PCB layouts, although its fine ball pitch requires careful escape routing, inspection, and assembly-process control.
For PCB implementation, route the power and ground connections as short and wide as practical, place decoupling capacitors close to the supply pins, and follow the manufacturer package and pin-assignment drawings when assigning BGA balls. Confirm the exact USB transceiver integration, clock arrangement, boot configuration, and peripheral pin multiplexing against the manufacturer device documentation before releasing the layout.
This product page combines the exact ordering code, memory configuration, package information, sourcing structure, comparison parameters, and practical BGA design guidance needed to evaluate ATXMEGA64A1U-CU for an embedded USB controller design.
کے لیے ڈراپ اِن متبادل ATXMEGA64A1U-CU — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATXMEGA64A1U-CU (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Boot Code Section, External Bus Interface, Mounting Type, SRAM.
ATXMEGA64A1U-C7U
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATXMEGA128A1U-CUR
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATXMEGA128A1U-C7U
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATXMEGA64A1U-CU زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| زیادہ سے زیادہ کلاک فریکوئنسی | 32 MHz |
| Flash Program Memory | 64 KB (32K x 16) |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 2 KB |
| Operating Voltage Range | 1.6 V to 3.6 V |
| DMA Channels | 4 channels |
| Event System Channels | 8 channels |
| External Bus Interface | 1 interface |
| USB Interface | 1 USB interface |
| پیکیج | 100-CBGA (9 x 9 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Core | AVR XMEGA 8/16-bit |
| Self-Programming Flash | Supported |
| RoHS اسٹیٹس | Compliant |
| Number of I/O Pins | 78 pins |
| Interrupt Vectors | 125 vectors |
ATXMEGA64A1U-CU 100-cbga (9 x 9 mm) پن کنفیگریشن گائیڈ
ATXMEGA64A1U-CU (100-cbga (9 x 9 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATXMEGA64A1U-CU.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ATXMEGA64A1U-CU کے لیے موزوں ہے 6 ایپلیکیشنs: USB Data-Acquisition Controller, Industrial Sensor Gateway, USB Programmable Control Unit, Communications Interface Module, Low-Power Monitoring Node, Bootloader-Controlled Embedded Device.
USB Data-Acquisition Controller
The ATXMEGA64A1U-CU fits a USB data-acquisition controller because it combines 64 KB of Flash with 4 KB of SRAM, a 32 MHz clock, and USB connectivity. The 4-channel DMA controller can move sampled data between memory and peripherals with reduced processor intervention. Place the MCU between the sensor interface and a USB transceiver or USB connector, then configure the USB peripheral for the required transfer rate. The 100-CBGA package helps keep the controller compact, although the fine ball pitch requires controlled assembly and inspection. Firmware size should be monitored because 64 KB includes a 4 KB boot-code section.
تجویز کردہ
Industrial Sensor Gateway
The ATXMEGA64A1U-CU is appropriate for an industrial sensor gateway when local sampling, configuration, and USB upload are required. Its 1.6 V to 3.6 V operating range supports low-voltage sensor systems, while 4 KB of SRAM can hold temporary measurement data and 2 KB of EEPROM can retain calibration or network parameters. The 8-channel event system can coordinate timing between timers, communication peripherals, and sensor-related events, and DMA reduces repetitive register transfers. Designers should partition firmware around the 64 KB Flash limit and confirm the required temperature grade for the installation environment.
تجویز کردہ
USB Programmable Control Unit
The ATXMEGA64A1U-CU can serve as a USB programmable control unit for compact automation, test, and service equipment. A 32 MHz operating frequency supports responsive control logic, while self-programming Flash permits firmware to be updated through the device's programming workflow. The 4 KB boot-code section provides a distinct area for startup or recovery code, allowing the main 64 KB memory region to be organized for application functions. For reliable USB operation, follow the manufacturer guidance for transceiver connection, clocking, decoupling, and power sequencing. Validate the update process and boot transition timing before field deployment.
تجویز کردہ
Communications Interface Module
The ATXMEGA64A1U-CU suits a communications interface module that must combine embedded protocol handling with USB connectivity. Its external bus interface can support additional external devices, while DMA and the event system help coordinate data movement and peripheral timing. With 4 KB of SRAM, the firmware can maintain packet buffers and protocol state without relying on external memory in simpler configurations. The 100-CBGA 9 x 9 mm package reduces board area but demands careful USB trace routing and power-plane continuity. Engineers should calculate worst-case firmware and buffer use and verify timing against the selected communications protocol.
تجویز کردہ
Low-Power Monitoring Node
The ATXMEGA64A1U-CU is suitable for a monitoring node that periodically records sensor data and transfers it over USB. Its 32 MHz processing capability provides headroom for filtering and protocol formatting, while the 4-channel DMA controller supports efficient background transfers. The 1.6 V minimum operating voltage enables integration with low-voltage sensing circuits, and the 2 KB EEPROM can hold calibration constants or device identifiers. Low-power behavior still depends on the selected clock mode, peripheral activity, and firmware design. Validate sleep-current targets and wake-up timing in the finished board rather than relying only on processor clock settings.
تجویز کردہ
Bootloader-Controlled Embedded Device
The ATXMEGA64A1U-CU fits a bootloader-controlled device because its 64 KB self-programming Flash includes a dedicated 4 KB boot-code section. The boot area can contain initialization and firmware-update logic, leaving the remaining program memory for the application. A USB connection can support maintenance workflows when the final board includes the required USB interface circuitry. Because the package is a 100-CBGA with a 9 x 9 mm body, layout planning should include BGA escape traces, decoupling placement, and programming-header access. Firmware should verify image integrity and manage the boot transition before any field update is accepted.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ATXMEGA64A1U-CU — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ATXMEGA64A1U-C7U | ATXMEGA128A1U-CUR | ATXMEGA128A1U-C7U |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-CBGA (9 x 9 mm) | 100-CBGA (9 x 9 mm) | 100-CBGA (9 x 9 mm) | 100-CBGA (9 x 9 mm) |
| Core | 8/16-bit AVR XMEGA | 8/16-bit AVR XMEGA | 8/16-bit AVR XMEGA | 8/16-bit AVR XMEGA |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Program Memory | 64 KB (32K x 16) | 64 KB | 128 KB | 128 KB |
اہم امتیازی خصوصیات
- Lower Flash capacity than the 128 KB A1U alternatives (بمقابلہATXMEGA128A1U-CUR)
- Identical core clock to the closest same-memory alternative (بمقابلہATXMEGA64A1U-C7U)
- Defined 4 KB boot-code partition (بمقابلہATXMEGA128A1U-CUR)
ڈیزائن نوٹس
Treat the 100-CBGA layout as a controlled fan-out problem rather than a conventional two-row perimeter package. Use the manufacturer ball map and land pattern, preserve short paths for clock and USB signals, and provide direct ground-plane access around the device. Validate escape geometry with the selected assembler because the 9 x 9 mm body and fine ball pitch can create difficult via-in-pad and solder- bridging conditions.
Place the required decoupling capacitors adjacent to the ATXMEGA64A1U-CU supply and ground balls, with short, low-loop-area connections and solid ground-plane continuity. The supported supply range is 1.6 V to 3.6 V, so every rail must remain within that interval during startup, transients, and peripheral operation. Check USB transceiver and external-interface supply requirements separately because they may require sequencing or filtering beyond the MCU rails.
Keep USB and clock routing away from noisy switching-converter paths, and avoid adding unnecessary vias or long stubs. Provide a continuous reference plane beneath high-speed routes and follow the manufacturer interface recommendations for impedance and termination. Because the MCU coordinates USB traffic through DMA and interrupts, inconsistent clocking or return-path discontinuities can appear as communication errors rather than obvious component failures.
Do not assume that every ATXMEGA A1 or A1U order code is interchangeable: the U designation is significant, and package, temperature, memory, and qualification options can differ. In addition, 64 KB of Flash includes the 4 KB boot-code section, so the application and bootloaders must share the stated program-memory budget. Validate the exact MPN, USB functions, clock source, boot configuration, and BGA footprint before schematic release.
تعمیل کی معلومات
RoHS compliance is identified for the related A1U ordering information. AEC-Q100 status, REACH status, lead-free designation, halogen-free status, and conflict-minerals status require confirmation from the manufacturer for the exact ordering code.