Microchip Technology

ATXMEGA64A1U-CU - 32MHz 64KB USB Microcontroller | Microchip

MPN: ATXMEGA64A1U-CU ✓ فعال
1.6 V to 3.6 V Vdss 100-CBGA (9 x 9 mm) Package 32 MHz Speed 64 KB (32K x 16) Memory
حداقل سفارش: 1 |

ATXMEGA64A1U-CU نمای کلی

The Microchip Technology ATXMEGA64A1U-CU is a low-power, high-performance 8/16-bit AVR XMEGA microcontroller with 64 KB of self-programming Flash, 4 KB of SRAM, 2 KB of EEPROM, a 32 MHz operating frequency, and a 100-CBGA 9 x 9 mm package. Its operating voltage range is 1.6 V to 3.6 V.

An 8/16-bit AVR microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, data memory, and peripherals in one device. The XMEGA A1U family belongs to the hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor ICs. Its multi-channel DMA controller, event system, external bus interface, and USB capability make it suitable for connected embedded-control equipment.

Key features include 64 KB of Flash organized as 32K x 16, a separate 4 KB boot-code section, 4 KB of SRAM, and 2 KB of EEPROM. The device operates from 1.6 V to 3.6 V at up to 32 MHz. A 4-channel DMA controller transfers data without continuous processor intervention, while the 8-channel event system links peripherals through hardware events and reduces software timing overhead.

The A1U architecture combines an 8-bit AVR instruction set with hardware support for efficient 16-bit operations. Its peripheral set includes an external bus interface for communication with external memory or peripheral devices. The USB-enabled A1U designation supports designs that require wired USB connectivity in addition to the standard serial and timer resources found in an embedded MCU.

Typical uses include industrial automation controllers, USB-connected data-acquisition units, low-power sensor hubs, communications equipment, and compact consumer products. The 100-CBGA package supports dense PCB layouts, although its fine ball pitch requires careful escape routing, inspection, and assembly-process control.

For PCB implementation, route the power and ground connections as short and wide as practical, place decoupling capacitors close to the supply pins, and follow the manufacturer package and pin-assignment drawings when assigning BGA balls. Confirm the exact USB transceiver integration, clock arrangement, boot configuration, and peripheral pin multiplexing against the manufacturer device documentation before releasing the layout.

This product page combines the exact ordering code, memory configuration, package information, sourcing structure, comparison parameters, and practical BGA design guidance needed to evaluate ATXMEGA64A1U-CU for an embedded USB controller design.

جایگزین‌های drop-in برای ATXMEGA64A1U-CU — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATXMEGA64A1U-CU (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Boot Code Section, External Bus Interface, Mounting Type, SRAM.

Microchip Technology
Package: 100-CBGA (9x9 mm, 0.8 mm pitch)
Boot Code Section: 8 KB
External Bus Interface: Yes
مقایسه با ATXMEGA64A1U-CU →
Microchip Technology
Package: 100-CBGA (9 mm x 9 mm)
External Bus Interface: Yes
مقایسه با ATXMEGA64A1U-CU →
Microchip Technology
Package: 100-CBGA (9 mm x 9 mm)
External Bus Interface: Yes
مقایسه با ATXMEGA64A1U-CU →
Microchip Technology
Package: 100-pin TQFP (14 mm x 14 mm)
مقایسه با ATXMEGA64A1U-CU →

ATXMEGA64A1U-C7U

✅ جایگزین مستقیم
📦 100-CBGA (9 x 9 mm)
Flash memory differs by 0 KB (0%) and maximum clock differs by 0 MHz (0%); the order code differs

📋 جایگزین مرجع (خارج از کاتالوگ)

ATXMEGA128A1U-CUR

✅ جایگزین مستقیم
📦 100-CBGA (9 x 9 mm)
Flash increases from 64 KB to 128 KB, a 64 KB or 100% increase, while maximum clock remains 32 MHz

📋 جایگزین مرجع (خارج از کاتالوگ)

ATXMEGA128A1U-C7U

✅ جایگزین مستقیم
📦 100-CBGA (9 x 9 mm)
Flash increases from 64 KB to 128 KB, a 64 KB or 100% increase, while maximum clock remains 32 MHz

📋 جایگزین مرجع (خارج از کاتالوگ)

ATXMEGA64A1U-CU حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 8/16-bit AVR XMEGA microcontroller
حداکثر فرکانس کلاک 32 MHz
Flash Program Memory 64 KB (32K x 16)
Boot Code Section 4 KB
SRAM 4 KB
EEPROM 2 KB
Operating Voltage Range 1.6 V to 3.6 V
DMA Channels 4 channels
Event System Channels 8 channels
External Bus Interface 1 interface
USB Interface 1 USB interface
بسته‌بندی 100-CBGA (9 x 9 mm)
نوع نصب Surface Mount
Core AVR XMEGA 8/16-bit
Self-Programming Flash Supported
وضعیت RoHS Compliant
Number of I/O Pins 78 pins
Interrupt Vectors 125 vectors

راهنمای پیکربندی پین ATXMEGA64A1U-CU 100-cbga (9 x 9 mm)

پیکربندی پین برای ATXMEGA64A1U-CU (پکیج 100-cbga (9 x 9 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 100-cbga (9 x 9 mm) برای ATXMEGA64A1U-CU

داده پین‌آوت تفصیلی موجود نیست برای ATXMEGA64A1U-CU.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATXMEGA64A1U-CU مناسب است برای 6 کاربردs: USB Data-Acquisition Controller, Industrial Sensor Gateway, USB Programmable Control Unit, Communications Interface Module, Low-Power Monitoring Node, Bootloader-Controlled Embedded Device.

📡

USB Data-Acquisition Controller

The ATXMEGA64A1U-CU fits a USB data-acquisition controller because it combines 64 KB of Flash with 4 KB of SRAM, a 32 MHz clock, and USB connectivity. The 4-channel DMA controller can move sampled data between memory and peripherals with reduced processor intervention. Place the MCU between the sensor interface and a USB transceiver or USB connector, then configure the USB peripheral for the required transfer rate. The 100-CBGA package helps keep the controller compact, although the fine ball pitch requires controlled assembly and inspection. Firmware size should be monitored because 64 KB includes a 4 KB boot-code section.

🏭

Industrial Sensor Gateway

The ATXMEGA64A1U-CU is appropriate for an industrial sensor gateway when local sampling, configuration, and USB upload are required. Its 1.6 V to 3.6 V operating range supports low-voltage sensor systems, while 4 KB of SRAM can hold temporary measurement data and 2 KB of EEPROM can retain calibration or network parameters. The 8-channel event system can coordinate timing between timers, communication peripherals, and sensor-related events, and DMA reduces repetitive register transfers. Designers should partition firmware around the 64 KB Flash limit and confirm the required temperature grade for the installation environment.

🔧

USB Programmable Control Unit

The ATXMEGA64A1U-CU can serve as a USB programmable control unit for compact automation, test, and service equipment. A 32 MHz operating frequency supports responsive control logic, while self-programming Flash permits firmware to be updated through the device's programming workflow. The 4 KB boot-code section provides a distinct area for startup or recovery code, allowing the main 64 KB memory region to be organized for application functions. For reliable USB operation, follow the manufacturer guidance for transceiver connection, clocking, decoupling, and power sequencing. Validate the update process and boot transition timing before field deployment.

🌐

Communications Interface Module

The ATXMEGA64A1U-CU suits a communications interface module that must combine embedded protocol handling with USB connectivity. Its external bus interface can support additional external devices, while DMA and the event system help coordinate data movement and peripheral timing. With 4 KB of SRAM, the firmware can maintain packet buffers and protocol state without relying on external memory in simpler configurations. The 100-CBGA 9 x 9 mm package reduces board area but demands careful USB trace routing and power-plane continuity. Engineers should calculate worst-case firmware and buffer use and verify timing against the selected communications protocol.

🧩

Low-Power Monitoring Node

The ATXMEGA64A1U-CU is suitable for a monitoring node that periodically records sensor data and transfers it over USB. Its 32 MHz processing capability provides headroom for filtering and protocol formatting, while the 4-channel DMA controller supports efficient background transfers. The 1.6 V minimum operating voltage enables integration with low-voltage sensing circuits, and the 2 KB EEPROM can hold calibration constants or device identifiers. Low-power behavior still depends on the selected clock mode, peripheral activity, and firmware design. Validate sleep-current targets and wake-up timing in the finished board rather than relying only on processor clock settings.

📱

Bootloader-Controlled Embedded Device

The ATXMEGA64A1U-CU fits a bootloader-controlled device because its 64 KB self-programming Flash includes a dedicated 4 KB boot-code section. The boot area can contain initialization and firmware-update logic, leaving the remaining program memory for the application. A USB connection can support maintenance workflows when the final board includes the required USB interface circuitry. Because the package is a 100-CBGA with a 9 x 9 mm body, layout planning should include BGA escape traces, decoupling placement, and programming-header access. Firmware should verify image integrity and manage the boot transition before any field update is accepted.

What is the operating voltage of ATXMEGA64A1U-CU?
The ATXMEGA64A1U-CU operates from 1.6 V to 3.6 V. According to the Mouser product listing for the exact ATXMEGA64A1U-CU ordering code, the device is an 8-bit AVR XMEGA microcontroller with 64 KB Flash, 2 KB EEPROM, 4 KB SRAM, and a 1.6 V to 3.6 V supply range. Designers should keep all supply rails within this interval and include local decoupling close to the device power pins.
What are the key specifications of ATXMEGA64A1U-CU?
The ATXMEGA64A1U-CU provides 64 KB of Flash, 4 KB of SRAM, 2 KB of EEPROM, a 32 MHz maximum clock, and USB connectivity in a 100-CBGA 9 x 9 mm package. According to the Microchip ATxmega64A1U product page, it also includes 4-channel DMA, an 8-channel event system, and an external bus interface. These resources support responsive embedded designs with concurrent peripheral transfers.
Where can I download the ATXMEGA64A1U-CU datasheet?
The official ATXMEGA64A1U documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/ATXMEGA64A1U. Use the device documentation section for the complete family datasheet and package information. The exact ordering code is ATXMEGA64A1U-CU, while the -CU suffix identifies the 100-CBGA package configuration used in this selection.
Where can I find the ATXMEGA64A1U-CU pinout?
Use the pin-description and package drawings on the Microchip ATxmega64A1U product page to locate the ATXMEGA64A1U-CU ball assignments. The device uses a 100-CBGA 9 x 9 mm package with 78 I/O pins. Because the package combines BGA balls with multiplexing and power-related positions, use the manufacturer drawings for PCB escape routing rather than relying on a generic BGA layout.
What is the best drop-in replacement for ATXMEGA64A1U-CU?
The ATXMEGA64A1U-C7U is the closest documented same-brand option because it retains the 64 KB memory configuration, 32 MHz architecture, and 100-CBGA package while using a different order code. The ATXMEGA128A1U-CUR is also pin-compatible at the package level but doubles Flash memory from 64 KB to 128 KB. Confirm temperature grade, USB behavior, clock configuration, and exact ball mapping before replacement.
Can ATXMEGA64A1U-CUR replace ATXMEGA64A1U-CU?
The ATXMEGA64A1U-CUR can be considered for a hardware-level replacement when the PCB uses the matching 100-CBGA footprint and the application can tolerate the ordering and qualification differences. Both devices use the XMEGA A1U architecture, but the order codes may differ in packaging or temperature-related configuration. Review the manufacturer device tables before treating the substitution as exact.
When should I choose ATXMEGA64A1U-CU instead of ATXMEGA128A1U-CUR?
Choose ATXMEGA64A1U-CU when 64 KB of Flash is sufficient and cost or design standardization favors the lower-memory option. Choose ATXMEGA128A1U-CUR when a larger firmware image is required, since it provides 128 KB of Flash compared with 64 KB, a 64 KB or 100% increase. Both retain the 32 MHz XMEGA A1U performance class and USB-oriented family architecture.
Is ATXMEGA64A1U-CU suitable for industrial automation?
The ATXMEGA64A1U-CU is suitable for many industrial automation and embedded-control functions because it combines 32 MHz processing with 4 KB SRAM, 64 KB Flash, USB, DMA, and a hardware event system. Its 1.6 V to 3.6 V operating range supports low-voltage embedded systems. For deployments requiring a defined automotive qualification or a specific industrial temperature grade, confirm that qualification before production release.
ATXMEGA64A1U-CU vs ATXMEGA64A1-CU: which is better for USB designs?
The ATXMEGA64A1U-CU is the better starting choice for a USB design because the A1U family is identified as USB-enabled, while the ATXMEGA64A1-CU comparison result does not identify USB in the same way. Both families use 64 KB Flash, 4 KB SRAM, 2 KB EEPROM, and the 32 MHz XMEGA architecture. Confirm USB PHY, connector, and routing requirements in the device documentation.
What can replace ATXMEGA64A1U-CU without changing the PCB?
A PCB-compatible replacement must use the 100-CBGA 9 x 9 mm footprint and preserve the required XMEGA A1U functions. ATXMEGA64A1U-C7U and ATXMEGA128A1U-CUR are the closest same-brand candidates identified in the comparison information. The first retains 64 KB of Flash, while the second increases Flash to 128 KB. Verify temperature grade, USB behavior, pin multiplexing, and firmware implications before substitution.
Is ATXMEGA64A1U-CU the same as ATXMEGA64A1U-C7U?
The ATXMEGA64A1U-C7U and ATXMEGA64A1U-CU share the XMEGA A1U identity, 64 KB Flash configuration, 4 KB SRAM, 2 KB EEPROM, 32 MHz clock class, and 100-CBGA package family. They are not identical order codes, so qualification and order-code attributes must be checked before interchangeability is declared. The documented difference is the order code rather than a core memory or clock difference.
How much memory does ATXMEGA64A1U-CU have?
The ATXMEGA64A1U-CU has 64 KB of self-programming Flash, including a separate 4 KB boot-code section, plus 4 KB of SRAM and 2 KB of EEPROM. According to the Microchip product page, Flash is organized as 32K x 16. The 4 KB SRAM is often useful for buffering sampled data, while EEPROM provides nonvolatile storage for configuration values.
Where to buy ATXMEGA64A1U-CU online?
Use the Request a Quote form on this page to request the ATXMEGA64A1U-CU, current lead time, stock status, and quantity pricing. The exact part is listed under ordering code ATXMEGA64A1U-CU in the 100-CBGA 9 x 9 mm package. Include your required quantity, assembly packaging preference, target date, and shipment destination in the request so the sourcing response matches the production plan.
What is the price of ATXMEGA64A1U-CU?
Current pricing for ATXMEGA64A1U-CU is best obtained through the Request a Quote form on this page because the page's structured pricing reflects the requested quantity and sourcing conditions. The listing identifies the exact MPN as a 32 MHz, 64 KB Flash XMEGA A1U microcontroller in a 100-CBGA package. Submit the required order quantity to receive a current quotation and delivery schedule.
What is the lead time and stock status for ATXMEGA64A1U-CU?
Request the current stock position, lead time, and minimum order quantity for ATXMEGA64A1U-CU through the Request a Quote form on this page. Lead time can vary with order quantity, production allocation, package configuration, and shipment destination. For a production schedule, include the required quantity, forecast dates, approved vendor list, and any no-charge or date-code requirements with the request.
What is the best Microchip equivalent for ATXMEGA64A1U-CU?
The best Microchip candidate is the ATXMEGA64A1U-C7U because it retains the 64 KB Flash configuration, 32 MHz XMEGA A1U architecture, and 100-CBGA package family while changing the exact order code. The ATXMEGA128A1U-CUR is another package-level alternative with 128 KB Flash. No cross-manufacturer part was documented as a pin-compatible replacement, so firmware and pin multiplexing must be reviewed before any substitution.

داده‌های مرجع مهندسی برای ATXMEGA64A1U-CU — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ATXMEGA64A1U-CU for compact USB-capable embedded products where 64 KB of Flash, 4 KB of SRAM, 2 KB of EEPROM, and a 32 MHz clock are sufficient. Its 4-channel DMA controller and 8-channel event system are valuable when several peripherals must operate concurrently without excessive processor intervention. Select ATXMEGA64A1U-C7U when its specific order-code attributes are preferred and the 64 KB memory configuration remains appropriate. Consider ATXMEGA128A1U-CUR or ATXMEGA128A1U-C7U when application firmware, boot code, or future updates require 128 KB of Flash. Before replacing the target, confirm the 100-CBGA footprint, USB functions, clock architecture, operating-temperature range, qualification, and boot behavior. No documented cross-manufacturer pin-compatible substitute was identified, so a redesign is required if Microchip XMEGA A1U silicon cannot be used.

مقایسه با جایگزین‌ها

پارامتر این محصول ATXMEGA64A1U-C7U ATXMEGA128A1U-CUR ATXMEGA128A1U-C7U
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 100-CBGA (9 x 9 mm) 100-CBGA (9 x 9 mm) 100-CBGA (9 x 9 mm) 100-CBGA (9 x 9 mm)
Core 8/16-bit AVR XMEGA 8/16-bit AVR XMEGA 8/16-bit AVR XMEGA 8/16-bit AVR XMEGA
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Flash Program Memory 64 KB (32K x 16) 64 KB 128 KB 128 KB

تفاوت‌های کلیدی

  • Lower Flash capacity than the 128 KB A1U alternatives (در مقابلATXMEGA128A1U-CUR)
  • Identical core clock to the closest same-memory alternative (در مقابلATXMEGA64A1U-C7U)
  • Defined 4 KB boot-code partition (در مقابلATXMEGA128A1U-CUR)

یادداشت‌های طراحی

Treat the 100-CBGA layout as a controlled fan-out problem rather than a conventional two-row perimeter package. Use the manufacturer ball map and land pattern, preserve short paths for clock and USB signals, and provide direct ground-plane access around the device. Validate escape geometry with the selected assembler because the 9 x 9 mm body and fine ball pitch can create difficult via-in-pad and solder- bridging conditions.

Place the required decoupling capacitors adjacent to the ATXMEGA64A1U-CU supply and ground balls, with short, low-loop-area connections and solid ground-plane continuity. The supported supply range is 1.6 V to 3.6 V, so every rail must remain within that interval during startup, transients, and peripheral operation. Check USB transceiver and external-interface supply requirements separately because they may require sequencing or filtering beyond the MCU rails.

Keep USB and clock routing away from noisy switching-converter paths, and avoid adding unnecessary vias or long stubs. Provide a continuous reference plane beneath high-speed routes and follow the manufacturer interface recommendations for impedance and termination. Because the MCU coordinates USB traffic through DMA and interrupts, inconsistent clocking or return-path discontinuities can appear as communication errors rather than obvious component failures.

Do not assume that every ATXMEGA A1 or A1U order code is interchangeable: the U designation is significant, and package, temperature, memory, and qualification options can differ. In addition, 64 KB of Flash includes the 4 KB boot-code section, so the application and bootloaders must share the stated program-memory budget. Validate the exact MPN, USB functions, clock source, boot configuration, and BGA footprint before schematic release.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS compliance is identified for the related A1U ordering information. AEC-Q100 status, REACH status, lead-free designation, halogen-free status, and conflict-minerals status require confirmation from the manufacturer for the exact ordering code.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

atxmega64a1u cur ATXMEGA64A1U-CU datasheet ATXMEGA64A1U-CU datasheet pdf ATXMEGA64A1U-CU pinout ATXMEGA64A1U-CU equivalent ATXMEGA64A1U-CU replacement ATXMEGA64A1U-CU vs ATXMEGA128A1U-CUR Microchip ATXMEGA64A1U-CU ATXMEGA64A1U-CU 32MHz 64KB ATXMEGA64A1U-CU 100-CBGA pinout ATXMEGA64A1U-CU USB microcontroller ATXMEGA64A1U-CU price ATXMEGA64A1U-CU stock ATXMEGA64A1U-CU USB sensor controller

قطعات و اصطلاحات مرتبط

Microchip Technology ATXMEGA64A1U-CU ATXMEGA64A1U ATXMEGA64A1U-C7U ATXMEGA128A1U-CUR ATXMEGA128A1U-C7U AVR XMEGA AVR microcontroller 8/16-bit microcontroller embedded processor semiconductor IC USB DMA controller event system external bus interface self-programming Flash boot code section SRAM EEPROM 32 MHz 1.6 V to 3.6 V 100-CBGA BGA surface mount RoHS industrial automation USB data acquisition sensor gateway
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ