Broadcom

BCM5695B0IPB - 12-Port Gigabit Ethernet Stackable Switch | Broadcom

MPN: BCM5695B0IPB ✓ فعال
Gigabit Ethernet, up to 1 Gbit/s per port Speed
MOQ: 1 |

BCM5695B0IPB جائزہ

The Broadcom BCM5695B0IPB is a multilayer 12-port Gigabit Ethernet stackable switch IC designed for multilayer network switching equipment. It combines 12 Gigabit Ethernet ports with stackable-switch functionality in a single integrated device, making it suitable for access, aggregation, and enterprise network platforms that require a high port count. The device is categorized as an Ethernet network interface IC and is listed with active lifecycle status.

An Ethernet switch is a semiconductor that forwards Ethernet frames between connected network nodes using dedicated packet-processing hardware. A multilayer switch extends basic Layer 2 forwarding with Layer 3 routing functions, while a stackable design allows multiple switching units to operate as a coordinated network system. These capabilities position the BCM5695B0IPB as a central connectivity component rather than a simple endpoint transceiver.

The principal headline characteristic of the BCM5695B0IPB is its 12-port Gigabit Ethernet configuration. Gigabit Ethernet supports data rates up to 1 Gbit/s per port, allowing the device to address network switching designs that require higher bandwidth than legacy 10/100-Mbit/s interfaces. Its multilayer architecture supports equipment requiring both switched and routed traffic handling, while stackability provides a path toward larger logical switch systems built from multiple devices.

The BCM5695B0IPB family is positioned for communications and networking equipment, where integration, port density, and switching throughput are central design requirements. A single 12-port device can reduce the component count associated with distributing Ethernet connectivity across a chassis or switch assembly. Designers still need to validate the exact interface protocols, clocking, management, power, and thermal requirements against the manufacturer datasheet before finalizing a board design.

Typical uses include Layer 3 access switches, enterprise Ethernet switching systems, network aggregation equipment, and industrial communication infrastructure. Its 12 Gigabit ports make it especially relevant to designs that need numerous copper-network connections while maintaining a compact switching subsystem. The stackable feature can also suit distributed campus, building, or enterprise deployments where additional port capacity is required beyond one chassis.

A key design consideration is that switching throughput, port media support, management interfaces, and electrical characteristics must be checked at the system level. Use the manufacturer pin description and reference design when assigning signals, supplying the device, and implementing magnetics or PHY circuitry. PCB designers should also preserve high-speed routing, power-delivery, and thermal-management practices appropriate for a multilayer communications ASIC.

This page organizes the known BCM5695B0IPB identity and network role into an engineering selection guide, practical application context, parameter comparison framework, and sourcing checklist. It separates confirmed device characteristics from details that require verification in the manufacturer documentation, helping engineers plan a compatible switch-platform design before schematic capture.

کے لیے ڈراپ اِن متبادل BCM5695B0IPB — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

BCM5695B0IPB زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Multilayer Gigabit Ethernet Stackable Switch IC
Number of Ethernet Ports 12 ports
Ethernet Speed Class Gigabit Ethernet, up to 1 Gbit/s per port
Supported Network Layer Layer 3
Switching Architecture Multilayer switching
Stackability Stackable
Device Classification Communications and networking interface IC
Manufacturer Broadcom
لائف سائیکل کی حالت Active

BCM5695B0IPB standard پن کنفیگریشن گائیڈ

BCM5695B0IPB (standard پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

BCM5695B0IPB کے لیے standard پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں BCM5695B0IPB.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

BCM5695B0IPB کے لیے موزوں ہے 6 ایپلیکیشنs: Enterprise Access Switching, Network Aggregation Equipment, Stackable Campus Network Design, Industrial Ethernet Infrastructure, Communication Chassis and Gateway, Service Provider Edge Equipment.

🌐

Enterprise Access Switching

The BCM5695B0IPB fits enterprise access-switch designs that require 12 Gigabit Ethernet ports in a multilayer switching platform. The confirmed 12-port configuration supports dense user-access connectivity, while Layer 3 operation enables routing functions beyond basic Layer 2 forwarding. Stackable capability is valuable when a deployment must scale beyond one switch unit. Engineers should use the manufacturer application material to select compatible PHYs, magnetics, management firmware, clock sources, and backend interfaces before freezing the system architecture.

🖥️

Network Aggregation Equipment

The BCM5695B0IPB is suitable for aggregation equipment where multiple Gigabit Ethernet links must be combined into a higher-performance switching subsystem. Its multilayer architecture supports Layer 3 traffic handling, and all 12 ports operate in the Gigabit Ethernet class, up to 1 Gbit/s per port. This makes the device relevant to systems balancing access traffic and uplinks. Confirm switching throughput, forwarding table limits, queueing behavior, and external interfaces in the Broadcom documentation before selecting port mappings.

🏢

Stackable Campus Network Design

The BCM5695B0IPB can support a stackable campus-network design because it combines 12 Gigabit Ethernet ports with explicit stackable functionality. Multiple switching units can be coordinated to provide scalable port capacity across a building, campus, or enterprise access layer. The Layer 3 architecture also supports routed traffic distribution rather than simple local bridging. Validate stack-topology limits, stack bandwidth, management behavior, and failure-recovery requirements against the manufacturer documentation before implementation.

🏭

Industrial Ethernet Infrastructure

The BCM5695B0IPB can be evaluated for industrial Ethernet infrastructure that requires a concentrated set of 12 Gigabit Ethernet connections and routed switching. Its multilayer design allows the equipment to perform network functions above ordinary Layer 2 bridging, while the high port count supports controllers, machines, supervisory systems, and plant gateways. Environmental qualification, operating-temperature limits, power integrity, and electromagnetic compatibility must be assessed for the complete product rather than inferred from its networking role.

🔧

Communication Chassis and Gateway

The BCM5695B0IPB is appropriate for communication chassis and gateway equipment that must combine numerous Gigabit Ethernet endpoints with centralized Layer 3 processing. Integrating 12 ports into one switching IC can reduce board-level switching complexity while preserving a 1 Gbit/s-per-port physical interface class. A practical design still needs PHY or media-interface support, management connectivity, suitable clocking, and a thermal solution. Follow the manufacturer reference schematic closely because network ASICs commonly have demanding power and routing constraints.

📡

Service Provider Edge Equipment

The BCM5695B0IPB can be considered for service-provider edge equipment requiring a 12-port Gigabit Ethernet switching block with Layer 3 and stackable capabilities. These functions support access aggregation, subscriber-edge routing, and distributed service-node interconnection. The device's confirmed role in multilayer stackable switching makes it more appropriate than a basic unmanaged switch ASIC. Review policy-table limits, QoS requirements, management software, backend connectivity, and environmental qualification before finalizing the platform design.

What is the BCM5695B0IPB?
The BCM5695B0IPB is a Broadcom multilayer 12-port Gigabit Ethernet stackable switch IC. According to the Broadcom product documentation, it is intended for communications and networking equipment and combines 12 Gigabit Ethernet ports with Layer 3 switching and stackable-system functionality. Its primary design role is to provide a high-density Ethernet switching subsystem within access, aggregation, enterprise, or industrial network equipment.
How many Gigabit Ethernet ports does the BCM5695B0IPB have?
The BCM5695B0IPB provides 12 Gigabit Ethernet ports. Gigabit Ethernet is defined by a nominal rate of up to 1 Gbit/s per port, giving the device a combined physical port count suitable for denser switch platforms than a typical eight-port design. Exact MAC table capacity, forwarding rates, media support, and port configurations should be confirmed in the manufacturer datasheet before system sizing.
What does stackable mean for the BCM5695B0IPB?
Stackable means the BCM5695B0IPB can participate in a coordinated Ethernet switching system with additional switching units. According to the Broadcom manufacturer datasheet, the device is a 12-port Gigabit Ethernet stackable switch. The number of devices supported in one stack, stack links, synchronization behavior, and management procedures are design-specific details that must be verified before implementation.
Is the BCM5695B0IPB suitable for Layer 3 switching?
Yes, the BCM5695B0IPB is identified as a multilayer switch capable of Layer 3 switching. This makes it applicable to routed access, aggregation, and enterprise network equipment rather than being limited to basic Layer 2 bridging. Confirm the specific routing protocols, hardware table sizes, VLAN behavior, and management features required by the target system in the manufacturer documentation.
Where can I download the BCM5695B0IPB datasheet PDF?
Use the Broadcom product documentation for BCM5695B0IPB to obtain the authoritative datasheet and package information. The available BCM5695B0IPB datasheet index identifies the device as a multilayer 12-port Gigabit Ethernet stackable switch. Confirm the document revision against your device ordering code before using its pin table, electrical limits, timing diagrams, or application schematic.
Where can I find the BCM5695B0IPB pinout?
The BCM5695B0IPB pinout must be taken from the manufacturer pin-description table because the package and lead assignments are not established by the product title alone. Use the package drawing and land-pattern guidance in the same Broadcom documentation set. Do not derive PCB connections from distributor categorization or from a similarly named switch device.
Can the BCM5695B0IPB be used in an enterprise access switch?
Yes, the BCM5695B0IPB is suitable for an enterprise access-switch design when the system requirements match its 12-port Gigabit Ethernet and multilayer switching capabilities. Its Layer 3 functionality supports routed-access architectures, while stackability can accommodate larger deployments. PHY selection, magnetics, management firmware, thermal design, and backend interfaces must be completed around the manufacturer reference design.
What is the difference between the BCM5695B0IPB and BCM5695IPB?
The BCM5695B0IPB is a Broadcom multilayer 12-port Gigabit Ethernet stackable switch, while BCM5695IPB is indexed as a separate Broadcom ordering entry. The two MPNs are not interchangeable by name alone: package dimensions, pin functions, electrical limits, firmware support, and ordering-code revisions must match exactly. Obtain both manufacturer datasheets and perform a formal engineering comparison before substitution.
When should I choose the BCM5695B0IPB for a network platform?
Choose the BCM5695B0IPB when the platform requires 12 Gigabit Ethernet ports, multilayer forwarding, and support for stackable switch operation. Its 12-port density can simplify a chassis design compared with separate switching components, while Layer 3 operation supports routed access and aggregation equipment. Select it only after confirming media interfaces, management features, thermal limits, and backend connectivity against the system specification.
Is the BCM5695B0IPB suitable for industrial network switches?
The BCM5695B0IPB can be considered for industrial Ethernet switching systems that require 12 Gigabit Ethernet ports and Layer 3 functionality. Its networking architecture fits controlled network infrastructure, but the environmental requirements depend on the complete system and device qualification. Check the manufacturer operating-temperature limits, power design, EMC requirements, and availability of supporting components before industrial deployment.
What can replace the BCM5695B0IPB?
No confirmed drop-in replacement for the BCM5695B0IPB can be identified from the available manufacturer and cross-reference information. A replacement must match the exact package, every pin function, power rails, clocking, interfaces, switching throughput, management features, and thermal limits. Do not substitute a similarly named BCM5695 device based on port count alone; request the exact component details through the Request a Quote form on this page.
What is the best Broadcom equivalent for the BCM5695B0IPB?
The closest named Broadcom entry is BCM5695IPB, but it cannot be classified as a drop-in equivalent without a manufacturer comparison of package, pins, electrical limits, and configuration support. The BCM5695B0IPB itself is a 12-port Gigabit Ethernet stackable switch, and compatibility cannot be inferred from a shared family name. Use the Request a Quote form to request assistance with exact ordering-code validation and sourcing.
Where can I buy BCM5695B0IPB online?
Use the Request a Quote form on this page to request BCM5695B0IPB availability, order quantities, and lead-time confirmation for the exact Broadcom ordering code. The device is a 12-port Gigabit Ethernet multilayer stackable switch, and package-specific quantities may differ from generic BCM5695-family stock. The form provides the appropriate route for a current component-specific quotation.
What is the price of BCM5695B0IPB?
A current price for BCM5695B0IPB is not stated on this page, so submit the exact MPN through the Request a Quote form for an up-to-date quotation. The quotation should be tied to BCM5695B0IPB rather than a generic BCM5695 family device because package and ordering-code differences can affect availability. The confirmed device specification is a 12-port Gigabit Ethernet multilayer stackable switch.
What is the lead time and stock status of BCM5695B0IPB?
Current stock and lead time for BCM5695B0IPB should be confirmed through the Request a Quote form on this page. The part is a Broadcom 12-port Gigabit Ethernet multilayer stackable switch and is listed with active lifecycle status, but lifecycle status does not by itself guarantee any quantity is immediately available. Include your required quantity, target date, and approved package details in the request.
What are the key specifications of BCM5695B0IPB that engineers should know?
The key confirmed specifications of BCM5695B0IPB are 12 Gigabit Ethernet ports, a multilayer switching architecture, Layer 3 operation, stackable functionality, and active lifecycle status. These characteristics place the device in high-density communications and networking equipment. Package, pin count, supply voltages, temperature range, MAC tables, throughput, and interface details require confirmation from the Broadcom datasheet before schematic release.

کے لیے انجینئرنگ ریفرنس ڈیٹا BCM5695B0IPB — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the BCM5695B0IPB for a network platform that specifically requires 12 Gigabit Ethernet ports, Layer 3 switching, and stackable operation. Its integrated 12-port configuration is well suited to access, aggregation, service-provider edge, and communication chassis designs where multiple Ethernet connections must be coordinated through one switching subsystem. Confirm that the exact package, supported media, management functions, clocking, and backend interfaces match the target equipment.

Do not approve BCM5695IPB or any other similarly named switch as a drop-in substitute solely from the family name. A production replacement requires an exact package and pin comparison, matching power rails and interfaces, equivalent switching performance, and confirmation that management software and stacking behavior remain compatible. If the BCM5695B0IPB is the only fully qualified device in the design, use the Request a Quote form to confirm exact ordering-code availability rather than relaxing the engineering requirements.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Manufacturer Broadcom
Port Count 12 Gigabit Ethernet ports
Maximum Port Speed 1 Gbit/s per port
Switching Architecture Multilayer
Network Layer Layer 3
Stackability Supported
Lifecycle Status Active

اہم امتیازی خصوصیات

  • High-density 12-port Gigabit integration (بمقابلہBCM5695IPB)
  • Layer 3 and stackable operation in one device (بمقابلہBasic unmanaged Ethernet switch controllers)
  • Active Broadcom communications platform (بمقابلہBCM5695IPB)

ڈیزائن نوٹس

Base high-speed and low-speed PCB routing on the manufacturer reference design and package information. Confirm the exact package, exposed-pad requirements, ball or lead assignments, and recommended layer stack before schematic completion. Network switching ASICs commonly combine high-speed SerDes or parallel interfaces with clocking and power domains, so route each interface class according to its specified impedance, spacing, and isolation requirements.

Do not design the power network until the datasheet identifies every supply rail, its operating range, sequencing rule, and current requirement. Use the manufacturer reference schematic to reproduce recommended ferrite beads, bulk and local capacitors, test points, and isolation boundaries. The required capacitance and ESR characteristics should come from the device documentation rather than generic values, because inadequate high-frequency decoupling can compromise a 12-port Gigabit switching subsystem.

Estimate junction temperature from actual board thermal resistance, copper area, airflow, and calculated device dissipation before release. Estimated: use the maximum specified device power, multiply it by the board-specific junction-to-ambient thermal resistance, and add the resulting rise to the maximum ambient temperature. Compare that result with the manufacturer junction limit and add thermal relief or copper-area changes if the margin is too small.

Avoid treating BCM5695-family ordering codes as automatically interchangeable. The BCM5695IPB and BCM5695B0IPB identifiers differ, but a title-level relationship does not prove package, pin, firmware, or electrical compatibility. For a redesign, obtain the exact datasheets, create a pin-by-pin and rail-by-rail comparison, and verify management-image and stacking compatibility before approving either part for production.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. AEC-Q100 is not applicable to this Ethernet switch category.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

BCM5695B0IPB datasheet BCM5695B0IPB specifications BCM5695B0IPB pinout BCM5695B0IPB datasheet pdf Broadcom BCM5695B0IPB BCM5695B0IPB 12 port Gigabit switch BCM5695B0IPB replacement BCM5695B0IPB equivalent BCM5695B0IPB vs BCM5695IPB BCM5695B0IPB price BCM5695B0IPB stock BCM5695B0IPB lead time BCM5695B0IPB layer 3 switching BCM5695B0IPB enterprise access switch

متعلقہ اجزاء اور اصطلاحات

Broadcom BCM5695B0IPB BCM5695IPB Gigabit Ethernet switch 12-port Ethernet switch multilayer switch Layer 3 switch stackable switch Ethernet switch network switch communications IC network interface IC semiconductor 1 Gbit/s Ethernet enterprise access switching network aggregation service-provider edge equipment industrial Ethernet infrastructure switching throughput Layer 2 forwarding Layer 3 routing stacking Gigabit Ethernet port network management
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں