BCM5695B0IPB - 12-Port Gigabit Ethernet Stackable Switch | Broadcom
MPN: BCM5695B0IPB ✓ 啟用中BCM5695B0IPB 概覽
An Ethernet switch is a semiconductor that forwards Ethernet frames between connected network nodes using dedicated packet-processing hardware. A multilayer switch extends basic Layer 2 forwarding with Layer 3 routing functions, while a stackable design allows multiple switching units to operate as a coordinated network system. These capabilities position the BCM5695B0IPB as a central connectivity component rather than a simple endpoint transceiver.
The principal headline characteristic of the BCM5695B0IPB is its 12-port Gigabit Ethernet configuration. Gigabit Ethernet supports data rates up to 1 Gbit/s per port, allowing the device to address network switching designs that require higher bandwidth than legacy 10/100-Mbit/s interfaces. Its multilayer architecture supports equipment requiring both switched and routed traffic handling, while stackability provides a path toward larger logical switch systems built from multiple devices.
The BCM5695B0IPB family is positioned for communications and networking equipment, where integration, port density, and switching throughput are central design requirements. A single 12-port device can reduce the component count associated with distributing Ethernet connectivity across a chassis or switch assembly. Designers still need to validate the exact interface protocols, clocking, management, power, and thermal requirements against the manufacturer datasheet before finalizing a board design.
Typical uses include Layer 3 access switches, enterprise Ethernet switching systems, network aggregation equipment, and industrial communication infrastructure. Its 12 Gigabit ports make it especially relevant to designs that need numerous copper-network connections while maintaining a compact switching subsystem. The stackable feature can also suit distributed campus, building, or enterprise deployments where additional port capacity is required beyond one chassis.
A key design consideration is that switching throughput, port media support, management interfaces, and electrical characteristics must be checked at the system level. Use the manufacturer pin description and reference design when assigning signals, supplying the device, and implementing magnetics or PHY circuitry. PCB designers should also preserve high-speed routing, power-delivery, and thermal-management practices appropriate for a multilayer communications ASIC.
This page organizes the known BCM5695B0IPB identity and network role into an engineering selection guide, practical application context, parameter comparison framework, and sourcing checklist. It separates confirmed device characteristics from details that require verification in the manufacturer documentation, helping engineers plan a compatible switch-platform design before schematic capture.
直接替換替代品,適用於 BCM5695B0IPB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品BCM5695B0IPB 最大額定值與電氣特性
| Product Type | Multilayer Gigabit Ethernet Stackable Switch IC |
| Number of Ethernet Ports | 12 ports |
| Ethernet Speed Class | Gigabit Ethernet, up to 1 Gbit/s per port |
| Supported Network Layer | Layer 3 |
| Switching Architecture | Multilayer switching |
| Stackability | Stackable |
| Device Classification | Communications and networking interface IC |
| Manufacturer | Broadcom |
| 生命週期狀態 | Active |
BCM5695B0IPB standard 腳位配置指南
BCM5695B0IPB(standard 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: BCM5695B0IPB.
請參閱 資料表 以查看完整腳位配置。
典型應用
BCM5695B0IPB 適用於 6 應用s: Enterprise Access Switching, Network Aggregation Equipment, Stackable Campus Network Design, Industrial Ethernet Infrastructure, Communication Chassis and Gateway, Service Provider Edge Equipment.
Enterprise Access Switching
The BCM5695B0IPB fits enterprise access-switch designs that require 12 Gigabit Ethernet ports in a multilayer switching platform. The confirmed 12-port configuration supports dense user-access connectivity, while Layer 3 operation enables routing functions beyond basic Layer 2 forwarding. Stackable capability is valuable when a deployment must scale beyond one switch unit. Engineers should use the manufacturer application material to select compatible PHYs, magnetics, management firmware, clock sources, and backend interfaces before freezing the system architecture.
Network Aggregation Equipment
The BCM5695B0IPB is suitable for aggregation equipment where multiple Gigabit Ethernet links must be combined into a higher-performance switching subsystem. Its multilayer architecture supports Layer 3 traffic handling, and all 12 ports operate in the Gigabit Ethernet class, up to 1 Gbit/s per port. This makes the device relevant to systems balancing access traffic and uplinks. Confirm switching throughput, forwarding table limits, queueing behavior, and external interfaces in the Broadcom documentation before selecting port mappings.
Stackable Campus Network Design
The BCM5695B0IPB can support a stackable campus-network design because it combines 12 Gigabit Ethernet ports with explicit stackable functionality. Multiple switching units can be coordinated to provide scalable port capacity across a building, campus, or enterprise access layer. The Layer 3 architecture also supports routed traffic distribution rather than simple local bridging. Validate stack-topology limits, stack bandwidth, management behavior, and failure-recovery requirements against the manufacturer documentation before implementation.
Industrial Ethernet Infrastructure
The BCM5695B0IPB can be evaluated for industrial Ethernet infrastructure that requires a concentrated set of 12 Gigabit Ethernet connections and routed switching. Its multilayer design allows the equipment to perform network functions above ordinary Layer 2 bridging, while the high port count supports controllers, machines, supervisory systems, and plant gateways. Environmental qualification, operating-temperature limits, power integrity, and electromagnetic compatibility must be assessed for the complete product rather than inferred from its networking role.
Communication Chassis and Gateway
The BCM5695B0IPB is appropriate for communication chassis and gateway equipment that must combine numerous Gigabit Ethernet endpoints with centralized Layer 3 processing. Integrating 12 ports into one switching IC can reduce board-level switching complexity while preserving a 1 Gbit/s-per-port physical interface class. A practical design still needs PHY or media-interface support, management connectivity, suitable clocking, and a thermal solution. Follow the manufacturer reference schematic closely because network ASICs commonly have demanding power and routing constraints.
Service Provider Edge Equipment
The BCM5695B0IPB can be considered for service-provider edge equipment requiring a 12-port Gigabit Ethernet switching block with Layer 3 and stackable capabilities. These functions support access aggregation, subscriber-edge routing, and distributed service-node interconnection. The device's confirmed role in multilayer stackable switching makes it more appropriate than a basic unmanaged switch ASIC. Review policy-table limits, QoS requirements, management software, backend connectivity, and environmental qualification before finalizing the platform design.
工程參考資料,適用於 BCM5695B0IPB — 比較、設計指引及合規資訊。
選型指南
Do not approve BCM5695IPB or any other similarly named switch as a drop-in substitute solely from the family name. A production replacement requires an exact package and pin comparison, matching power rails and interfaces, equivalent switching performance, and confirmation that management software and stacking behavior remain compatible. If the BCM5695B0IPB is the only fully qualified device in the design, use the Request a Quote form to confirm exact ordering-code availability rather than relaxing the engineering requirements.
與替代品比較
| 參數 | 本產品 |
|---|---|
| Manufacturer | Broadcom |
| Port Count | 12 Gigabit Ethernet ports |
| Maximum Port Speed | 1 Gbit/s per port |
| Switching Architecture | Multilayer |
| Network Layer | Layer 3 |
| Stackability | Supported |
| Lifecycle Status | Active |
主要差異化特點
- High-density 12-port Gigabit integration (對比BCM5695IPB)
- Layer 3 and stackable operation in one device (對比Basic unmanaged Ethernet switch controllers)
- Active Broadcom communications platform (對比BCM5695IPB)
設計說明
Base high-speed and low-speed PCB routing on the manufacturer reference design and package information. Confirm the exact package, exposed-pad requirements, ball or lead assignments, and recommended layer stack before schematic completion. Network switching ASICs commonly combine high-speed SerDes or parallel interfaces with clocking and power domains, so route each interface class according to its specified impedance, spacing, and isolation requirements.
Do not design the power network until the datasheet identifies every supply rail, its operating range, sequencing rule, and current requirement. Use the manufacturer reference schematic to reproduce recommended ferrite beads, bulk and local capacitors, test points, and isolation boundaries. The required capacitance and ESR characteristics should come from the device documentation rather than generic values, because inadequate high-frequency decoupling can compromise a 12-port Gigabit switching subsystem.
Estimate junction temperature from actual board thermal resistance, copper area, airflow, and calculated device dissipation before release. Estimated: use the maximum specified device power, multiply it by the board-specific junction-to-ambient thermal resistance, and add the resulting rise to the maximum ambient temperature. Compare that result with the manufacturer junction limit and add thermal relief or copper-area changes if the margin is too small.
Avoid treating BCM5695-family ordering codes as automatically interchangeable. The BCM5695IPB and BCM5695B0IPB identifiers differ, but a title-level relationship does not prove package, pin, firmware, or electrical compatibility. For a redesign, obtain the exact datasheets, create a pin-by-pin and rail-by-rail comparison, and verify management-image and stacking compatibility before approving either part for production.
合規資訊
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. AEC-Q100 is not applicable to this Ethernet switch category.