Silicon Labs

C8051F586-IM - 50MHz 8051 MCU with CAN/LIN | Silicon Labs

MPN: C8051F586-IM ✓ فعال
5 V Vdss 32-QFN, 5 mm x 5 mm Package 50 MHz Speed 96 KB Memory
MOQ: 1 |

C8051F586-IM جائزہ

The Silicon Labs C8051F586-IM is an 8-bit 8051-compatible mixed-signal microcontroller operating at up to 50 MHz, with 50 MIPS throughput, 96 KB of Flash memory, and communication interfaces including CAN 2.0 and LIN 2.1. It is packaged in a 32-QFN package measuring 5 mm by 5 mm. The device combines a high-performance 8051 core with 24 I/O lines, mixed-signal peripherals, timers, serial interfaces, and system-management functions for compact embedded control designs.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The C8051F586 belongs to the 8051 microcontroller family and provides deterministic control functions alongside serial communications. Its architecture operates from a 50 MHz system clock, while the 8051 instruction set achieves 50 MIPS throughput. This combination is intended for applications requiring fast peripheral handling without the complexity of a larger processor.

Key resources include 96 KB of Flash memory, 256 bytes of internal data RAM, and 8 KB of external data RAM. The interface set includes CAN 2.0, LIN 2.1, SPI, I2C, and two UARTs. Six 16-bit timer/counter blocks, a watchdog timer, a real-time clock, and two PCA modules support periodic control, timing, communications, and independent supervision. The device also provides 23 interrupt sources and two interrupt levels for structured event handling.

The C8051F586-IM is positioned for space-constrained automotive and industrial networking equipment where CAN and LIN connectivity, mixed-signal control, and a compact 32-QFN footprint are valuable. Its 50 MIPS execution rate provides a substantial processing margin for protocol handling, supervisory logic, and local control functions. Flash memory supports firmware updates while the RAM resources are suitable for stack variables, communication buffers, and state-machine data.

Typical applications include LIN-to-CAN gateways, automotive body-control modules, motor and actuator controllers, distributed sensor nodes, industrial communication controllers, and compact embedded instrumentation. The combination of CAN, LIN, SPI, I2C, and two UARTs allows the MCU to serve as a local communications hub while its timers and mixed-signal peripherals handle adjacent control functions.

PCB design should preserve the pin assignments and exposed-pad requirements defined by the manufacturer datasheet. Place decoupling capacitors close to the supply pins, route high-speed communication signals away from switching nodes, and provide a continuous ground reference beneath the QFN. Confirm oscillator, reset, programming, and exposed-pad connections against the device pin description before releasing the layout.

This page combines the manufacturer-device characteristics, distributor availability records, interface details, and same-family replacement considerations into an engineering-oriented overview. It also identifies the important distinctions between temperature-grade and package-ordering variants so engineers can distinguish a genuine drop-in substitution from a suffix change that affects procurement or qualification.

کے لیے ڈراپ اِن متبادل C8051F586-IM — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

C8051F586-IMR

✅ ڈراپ-اِن
📦 32-QFN (5x5 mm)
Same C8051F586 architecture, 50 MHz clock, 96 KB Flash, CAN and LIN; ordering suffix differs by packaging format

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

C8051F586-IQ

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 32-QFN (5x5 mm)
Same C8051F586 architecture and 32-QFN footprint; extended-temperature ordering grade differs from the industrial-grade target

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

C8051F586-IQR

✅ ڈراپ-اِن
📦 32-QFN (5x5 mm)
Same C8051F586 core and interfaces in 32-QFN; extended-temperature and reel-ordering suffix differs

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

C8051F586-AM

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 32-QFN (5x5 mm)
Same C8051F586 architecture and 50 MHz rating in 32-QFN; automotive ordering grade differs from the target industrial grade

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

C8051F502-IM

✅ ڈراپ-اِن
📦 32-QFN (5x5 mm)
Same 8051 family and 32-QFN class, but the peripheral and memory mix differs from the 50 MHz, 96 KB C8051F586 configuration

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

C8051F586-IM زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type 8-bit 8051-compatible mixed-signal microcontroller
زیادہ سے زیادہ کلاک فریکوئنسی 50 MHz
System Clock 24 MHz
Instruction Throughput 50 MIPS
Flash Memory 96 KB
Internal Data RAM 256 bytes
XDATA RAM 8 KB
General-Purpose I/O 24 lines
سپلائی وولٹیج 5 V
CAN Interface CAN 2.0
LIN Interface LIN 2.1
Serial Interfaces SPI, I2C, and 2 UARTs
Timer/Counter Counters 6 16-bit timer/counters
Programmable Counter Arrays 2 PCA modules with 12 compare/capture channels
Interrupt Structure 2 interrupt levels and 23 interrupt sources
System Peripherals Watchdog timer and real-time clock
Programming In-system programmable
پیکیج 32-QFN, 5 mm x 5 mm
ماؤنٹنگ ٹائپ Surface mount

C8051F586-IM 32-qfn, 5 mm x 5 mm پن کنفیگریشن گائیڈ

C8051F586-IM (32-qfn, 5 mm x 5 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

C8051F586-IM کے لیے 32-qfn, 5 mm x 5 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں C8051F586-IM.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

C8051F586-IM کے لیے موزوں ہے 6 ایپلیکیشنs: LIN-to-CAN Automotive Gateway, Body Control and Lighting Module, Industrial CAN Sensor Node, Motor and Actuator Controller, Distributed Sensor and IO Controller, Embedded Communication Controller.

🚗

LIN-to-CAN Automotive Gateway

The C8051F586-IM fits a compact gateway that must bridge LIN 2.1 and CAN 2.0 networks. Its 50 MHz clock and 50 MIPS throughput provide processing margin for protocol conversion, message filtering, diagnostics, and supervisory logic, while 96 KB of Flash stores routing tables and application firmware. The 8 KB of XDATA RAM supports receive buffers, transmit queues, and state-machine data without requiring an external memory device. Its 32-QFN package keeps the controller compact for body electronics and distribution boxes. The 24 I/O lines can also support discrete control signals. A production implementation must follow the manufacturer pin and exposed-pad layout, isolate communication routing from noisy power paths, and verify the exact qualification grade required by the vehicle program.

🚗

Body Control and Lighting Module

The C8051F586-IM is suitable for a body-control module that coordinates lighting, switch inputs, actuators, and vehicle-network messages. Its 24 I/O lines provide direct digital connectivity, six 16-bit timer/counters support accurate periodic or capture functions, and the two PCA modules add compare and capture channels for local timing tasks. The 50 MIPS execution rate allows communication handling and control logic to coexist within one 8-bit core. Its 96 KB of Flash accommodates diagnostics, configurable behavior, and update logic. Because the device is only 5 mm by 5 mm in a 32-QFN package, it supports compact electronics where PCB area is limited. Layout work should preserve the QFN exposed-pad connection, place supply decoupling close to the device, and keep switched-load paths separated from sensitive communication traces.

🏭

Industrial CAN Sensor Node

The C8051F586-IM can act as the communications and control center for an industrial sensor node that must publish measurements over CAN 2.0. Its 50 MHz clock and 50 MIPS throughput allow acquisition logic, filtering, diagnostics, and protocol processing to run without a separate communications processor. The 96 KB Flash capacity supports application firmware and protocol configuration, while 256 bytes of internal RAM and 8 KB of XDATA RAM cover working variables and message buffers. SPI and I2C can connect compatible sensors or configuration devices, and the two UART channels provide additional serial paths for local equipment. The compact 32-QFN package is advantageous in sealed or space-limited installations. Validate the final transceiver interface, isolation strategy, grounding, and operating-temperature requirements during hardware design.

🔧

Motor and Actuator Controller

The C8051F586-IM is appropriate for a compact actuator controller combining event timing, communications, and supervisory control. Six 16-bit timer/counters support precise intervals, pulse measurement, and periodic outputs, while the two PCA modules provide additional compare and capture channels. At 50 MIPS throughput, the 8-bit core can manage CAN or LIN traffic alongside control calculations and fault handling. The 24 I/O lines simplify connections to position sensors, limit switches, drivers, and status indicators, and the 8 KB of XDATA RAM provides space for motion state and diagnostic history. Its 32-QFN package reduces board footprint in space-constrained equipment. Power dissipation and transient behavior must be evaluated at the system level because motor and relay drivers can inject noise not represented by the microcontroller specifications.

🧩

Distributed Sensor and IO Controller

The C8051F586-IM works well as a distributed controller that gathers local digital and analog-related inputs before forwarding information over LIN or CAN. Its 24 I/O lines support multiple sensor-enable, logic, and status functions, while the programmable counter arrays and timer/counters provide capture and timing functions for pulses, frequency measurement, and scheduled outputs. At 50 MHz, the core can execute protocol handling alongside debouncing, filtering, and local state management. The 96 KB of Flash allows substantial device-level logic to remain local, reducing traffic over the vehicle or industrial network. A 5 mm by 5 mm 32-QFN helps standardize compact sensor modules. Designers should establish a common ground reference, use appropriate protection for external wiring, and separate long harness connections from high-speed digital traces.

🌐

Embedded Communication Controller

The C8051F586-IM can consolidate several low-speed communication tasks in one embedded controller. CAN 2.0 and LIN 2.1 handle network traffic, two UARTs support independent point-to-point links, and SPI and I2C connect sensors, memory, and configuration peripherals. The 50 MHz clock and 50 MIPS throughput provide ample instruction bandwidth for framing, filtering, protocol conversion, and local control, while the watchdog timer supports independent system supervision. Its 96 KB Flash and 8 KB XDATA RAM are useful for stack variables, protocol state, and local buffering. The 32-QFN package limits board area and simplifies integration into compact gateways or data concentrators. Production routing should include controlled clock and supply nets, short return paths, and protection appropriate to the external communication medium.

تجویز کردہ پروڈکٹس کا خلاصہ

C8051F586-IMR Same C8051F586 controller in a different ordering and packaging format استعمال ہوتا ہے: LIN-to-CAN Automotive Gateway, Motor and Actuator Controller, Embedded Communication Controller C8051F586-IQ Same C8051F586 controller configured for an extended-temperature ordering grade استعمال ہوتا ہے: LIN-to-CAN Automotive Gateway, Industrial CAN Sensor Node C8051F586-AM Automotive-grade C8051F586 ordering variant for evaluation against vehicle requirements استعمال ہوتا ہے: Body Control and Lighting Module, Motor and Actuator Controller, Embedded Communication Controller C8051F586-IQR Extended-temperature C8051F586 ordering variant استعمال ہوتا ہے: Body Control and Lighting Module, Distributed Sensor and IO Controller C8051F502-IM Related 8051-family controller for comparison against a different peripheral and memory mix استعمال ہوتا ہے: Industrial CAN Sensor Node, Distributed Sensor and IO Controller
What are the key specifications of C8051F586-IM that engineers should know?
The C8051F586-IM is an 8-bit 8051-compatible microcontroller with a 50 MHz maximum clock, 50 MIPS throughput, 96 KB of Flash, and a 32-QFN package. According to the Silicon Labs manufacturer datasheet, it provides 24 I/O lines, 256 bytes of internal RAM, 8 KB of XDATA RAM, CAN 2.0, LIN 2.1, SPI, I2C, two UARTs, six 16-bit timers, and in-system programming. These resources make it suitable for compact automotive, industrial, and communications-control designs.
What is the operating voltage and maximum clock frequency of C8051F586-IM?
The C8051F586-IM operates at 5 V and supports a maximum clock frequency of 50 MHz. The Silicon Labs manufacturer datasheet identifies a 24 MHz system clock for the device family and reports 50 MIPS instruction throughput. Designers should use the 50 MHz figure when assessing peripheral-clock capability, while using the datasheet oscillator configuration and supply requirements to determine the appropriate crystal, clock source, and decoupling arrangement for the target board.
What memory resources are available in the C8051F586-IM?
The C8051F586-IM includes 96 KB of Flash memory, 256 bytes of internal data RAM, and 8 KB of XDATA RAM. According to the Silicon Labs manufacturer datasheet, Flash provides nonvolatile firmware storage, while the RAM areas support variables, protocol buffers, stacks, and working data. The 96 KB Flash capacity is particularly useful for applications that combine CAN and LIN protocol handling, boot functions, diagnostics, and local control logic within one integrated controller.
Which communication interfaces does the C8051F586-IM provide?
The C8051F586-IM provides CAN 2.0, LIN 2.1, SPI, I2C, and two UART interfaces. According to the Silicon Labs manufacturer datasheet and distributor technical summaries, this interface mix supports vehicle-network gateways, body-control modules, sensor nodes, and industrial communications equipment. The two UART channels can manage independent serial links, while SPI and I2C connect lower-bandwidth peripherals such as sensors, displays, memory devices, or configuration ICs.
Where can I download the C8051F586-IM datasheet PDF?
The C8051F586-IM datasheet PDF is available through the Silicon Labs documentation resources linked from the manufacturer product documentation, with a mirrored PDF also indexed by AllDataSheet. The datasheet contains the authoritative pin descriptions, electrical characteristics, memory map, peripheral registers, oscillator options, and package drawings. Use the manufacturer copy for design release, and verify the device revision and ordering-code information against the package marking before production.
Where can I find the C8051F586-IM pinout and QFN-32 land pattern?
The C8051F586-IM pinout is defined in the pin-description and package-drawing sections of the Silicon Labs manufacturer datasheet. The device uses a 32-QFN package measuring 5 mm by 5 mm, and the board layout must follow the specified exposed-pad and thermal-via arrangement. The datasheet should be consulted before assigning tracks because the available distributor summaries confirm the package and pin count but do not reproduce every numbered signal name.
Is C8051F586-IM suitable for automotive LIN and CAN gateway designs?
The C8051F586-IM is suitable for compact LIN and CAN gateway concepts because it combines LIN 2.1, CAN 2.0, a 50 MHz clock, 50 MIPS throughput, and 96 KB of Flash in a 5 mm by 5 mm QFN package. The 24 I/O lines also support local control and discrete-interface functions. For a production automotive design, verify the exact temperature grade, qualification status, operating limits, and any automotive-specific approval requirements before release.
C8051F586-IM vs C8051F502-IM: which is better for a mixed-signal controller?
The C8051F586-IM is the stronger choice when the design requires CAN 2.0 and LIN 2.1 together with 50 MIPS throughput, 96 KB of Flash, and 8 KB of XDATA RAM. A C8051F502-IM comparison is available, but selecting it requires matching its complete peripheral map and pin functions to the design rather than relying on package similarity. The C8051F586-IM is preferable when dual network connectivity and the larger memory configuration materially simplify the implementation.
What is the difference between C8051F586-IM and C8051F586-IMR?
The C8051F586-IM and C8051F586-IMR identify ordering variants of the same C8051F586 device family, with the suffix distinction associated with packaging or ordering code. Both are associated with a 32-QFN device offering a 50 MHz clock, 96 KB of Flash, CAN 2.0, and LIN 2.1. Before substitution, compare the full ordering table, reel orientation, temperature grade, and shipping information, then use the manufacturer pin and package drawings to confirm mechanical compatibility.
When should I choose C8051F586-IM instead of C8051F502-IM?
Choose C8051F586-IM when the firmware benefits from simultaneous CAN 2.0 and LIN 2.1 support, 50 MIPS throughput, 96 KB of Flash, and 8 KB of XDATA RAM. The C8051F586-IM also provides two UARTs, SPI, I2C, six 16-bit timers, two PCA modules, a watchdog timer, and a real-time clock. Choose the other device only after verifying that its lower-cost or more specialized peripheral mix fully satisfies the application's communication and timing requirements.
What can replace C8051F586-IM without changing the PCB?
The closest drop-in candidates are ordering variants of the C8051F586 family that retain the 32-QFN footprint, 50 MHz clock, 96 KB of Flash, CAN 2.0, LIN 2.1, and the 24 I/O architecture. The C8051F586-IQ, C8051F586-IQR, C8051F586-AM, C8051F586-IMR, and C8051F502-IM are listed for engineering comparison, but each must be checked against temperature grade, qualification, exposed-pad layout, and peripheral compatibility. PCB fit alone does not prove functional equivalence.
Is C8051F586-IM the same as C8051F502-IM?
No. The C8051F586-IM and C8051F502-IM are related 8051-family devices, but they are not automatically identical. The C8051F586-IM combines 50 MIPS throughput, 96 KB of Flash, 8 KB of XDATA RAM, CAN 2.0, LIN 2.1, SPI, I2C, and two UARTs. The C8051F502-IM may offer a different peripheral and memory balance, so engineers must compare pin functions, interrupt vectors, register maps, clock requirements, and qualification before treating it as a drop-in replacement.
Where to buy C8051F586-IM online?
The C8051F586-IM can be requested through the Request a Quote form on this page, where the exact MPN, quantity, target grade, and delivery requirements can be specified. The form is the appropriate route for current commercial availability and procurement coordination. Engineers should also retain the manufacturer datasheet and ordering information so that package, temperature-grade, and traceability requirements are matched exactly.
What is the price of C8051F586-IM?
Use the Request a Quote form on this page for the current commercial terms of the C8051F586-IM. The form allows the requested quantity and exact ordering suffix to be included in the quotation, reducing the risk of receiving a mechanically similar but grade-incompatible variant. No static price should be used for budgeting because distributor pricing, lot size, and availability can change independently of the technical specifications.
What is the lead time and stock status of C8051F586-IM?
The current stock position and lead time for C8051F586-IM should be confirmed through the Request a Quote form on this page. Submit the required quantity, delivery location, acceptable date, and whether the order must use an exact authorized supply channel. The distributor listings identify the part as available for quotation, but a firm schedule should be obtained for the specific order quantity and package-ordering suffix.
Is C8051F586-IM in stock?
Stock availability for C8051F586-IM should be checked through the Request a Quote form on this page. Include the exact quantity, target date, and any requirement for a specific reel, tray, or temperature-grade variant. Because C8051F586 ordering codes can encode meaningful commercial differences, confirming the full MPN with the supplier is preferable to relying on a generic family-level availability statement.

کے لیے انجینئرنگ ریفرنس ڈیٹا C8051F586-IM — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the C8051F586-IM when a compact controller must combine an 8051-compatible core, 50 MHz operation, 96 KB of Flash, 8 KB of XDATA RAM, CAN 2.0, LIN 2.1, and multiple serial interfaces in a 32-QFN package. The C8051F586-IQ or C8051F586-IQR may be preferable when the product requires a different temperature grade or ordering format, while C8051F586-AM supports evaluation of automotive-grade requirements. C8051F586-IMR can support procurement requirements that call for a different reel or ordering suffix. Consider C8051F502-IM only when its peripheral map, register set, memory organization, and pin multiplexing have been validated against the existing firmware and PCB. For every candidate, verify the manufacturer ordering table, exposed-pad layout, operating limits, qualification, and programming procedure before production release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ C8051F586-IMR C8051F586-IQ C8051F586-IQR C8051F586-AM C8051F502-IM
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 32-QFN (5x5 mm) 32-QFN (5x5 mm) 32-QFN (5x5 mm) 32-QFN (5x5 mm) 32-QFN (5x5 mm) 32-QFN (5x5 mm)
Processor Core 8051, 8-bit 8051, 8-bit 8051, 8-bit 8051, 8-bit 8051, 8-bit 8051, 8-bit

اہم امتیازی خصوصیات

  • Combined CAN and LIN connectivity (بمقابلہC8051F502-IM)
  • Higher documented processing margin (بمقابلہC8051F502-IM)
  • 96 KB of Flash in a compact package (بمقابلہC8051F586-IMR)
  • Eight-wire I/O expansion without changing the controller family (بمقابلہC8051F586-IQR)

ڈیزائن نوٹس

Use the manufacturer QFN-32 land pattern and exposed-pad connection exactly as specified for C8051F586. Place the required input and output decoupling capacitors adjacent to the corresponding supply pins, keep the exposed-pad connection short, and provide an uninterrupted ground plane beneath the package where permitted by the layout guidance. Confirm pin 1 orientation against the package drawing because the distributor summaries confirm the 32-QFN format but do not reproduce the complete numbered pin table.

Keep CAN, LIN, UART, SPI, and I2C routing away from switching nodes and high-current actuator outputs. Provide a continuous return path beneath communications traces and place any protection or transceiver components close to the connector where possible. The C8051F586 supports 24 I/O lines and multiple serial interfaces, but interface correctness still depends on controlled impedance, clean references, and separation from sources of transient noise.

Do not treat a shared 32-QFN package as proof that every C8051F586 ordering suffix is interchangeable. Confirm temperature grade, reel or tray format, automotive qualification, and the full ordering-code definition before releasing a substitution. For C8051F502-IM, also compare peripheral multiplexing, interrupt vectors, oscillator behavior, memory mapping, and register compatibility; a footprint match alone cannot establish firmware-level drop-in equivalence.

Plan the 5 V supply network for both the microcontroller and any attached communications transceivers. Use local high-frequency bypass in addition to bulk supply capacitance, and verify startup behavior across the complete input-voltage range used by the product. If the controller operates from a regulated automotive or industrial rail, account for transient protection upstream so that switching disturbances do not propagate directly into the MCU supply pins.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The C8051F586 family is described as automotive-capable, but the exact C8051F586-IM ordering grade and its compliance declarations must be confirmed in the manufacturer product documentation and material declaration before qualification.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

C8051F586-IM datasheet C8051F586-IM specifications C8051F586-IM pinout C8051F586-IM datasheet pdf Silicon Labs C8051F586-IM C8051F586 50MHz 8051 microcontroller C8051F586-IM CAN LIN controller C8051F586-IM equivalent C8051F586-IM replacement C8051F586-IM cross reference C8051F586-IM vs C8051F502-IM C8051F586-IM QFN-32 footprint C8051F586 automotive gateway MCU C8051F586-IM price C8051F586-IM stock

متعلقہ اجزاء اور اصطلاحات

Silicon Labs C8051F586 C8051F586-IM C8051F586-IMR C8051F586-IQ C8051F586-IQR C8051F586-AM C8051F502-IM 8-bit microcontroller 8051-compatible core mixed-signal microcontroller embedded microcontroller semiconductor CAN 2.0 LIN 2.1 SPI I2C UART 32-QFN QFN family surface mount SMD Flash memory XDATA RAM watchdog timer real-time clock programmable counter array LIN-to-CAN gateway body control module industrial sensor node
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں