C8051F586-IM - 50MHz 8051 MCU with CAN/LIN | Silicon Labs
Référence : C8051F586-IM ✓ ActifC8051F586-IM Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The C8051F586 belongs to the 8051 microcontroller family and provides deterministic control functions alongside serial communications. Its architecture operates from a 50 MHz system clock, while the 8051 instruction set achieves 50 MIPS throughput. This combination is intended for applications requiring fast peripheral handling without the complexity of a larger processor.
Key resources include 96 KB of Flash memory, 256 bytes of internal data RAM, and 8 KB of external data RAM. The interface set includes CAN 2.0, LIN 2.1, SPI, I2C, and two UARTs. Six 16-bit timer/counter blocks, a watchdog timer, a real-time clock, and two PCA modules support periodic control, timing, communications, and independent supervision. The device also provides 23 interrupt sources and two interrupt levels for structured event handling.
The C8051F586-IM is positioned for space-constrained automotive and industrial networking equipment where CAN and LIN connectivity, mixed-signal control, and a compact 32-QFN footprint are valuable. Its 50 MIPS execution rate provides a substantial processing margin for protocol handling, supervisory logic, and local control functions. Flash memory supports firmware updates while the RAM resources are suitable for stack variables, communication buffers, and state-machine data.
Typical applications include LIN-to-CAN gateways, automotive body-control modules, motor and actuator controllers, distributed sensor nodes, industrial communication controllers, and compact embedded instrumentation. The combination of CAN, LIN, SPI, I2C, and two UARTs allows the MCU to serve as a local communications hub while its timers and mixed-signal peripherals handle adjacent control functions.
PCB design should preserve the pin assignments and exposed-pad requirements defined by the manufacturer datasheet. Place decoupling capacitors close to the supply pins, route high-speed communication signals away from switching nodes, and provide a continuous ground reference beneath the QFN. Confirm oscillator, reset, programming, and exposed-pad connections against the device pin description before releasing the layout.
This page combines the manufacturer-device characteristics, distributor availability records, interface details, and same-family replacement considerations into an engineering-oriented overview. It also identifies the important distinctions between temperature-grade and package-ordering variants so engineers can distinguish a genuine drop-in substitution from a suffix change that affects procurement or qualification.
Alternatives de remplacement direct pour C8051F586-IM — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
C8051F586-IMR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
C8051F586-IQ
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
C8051F586-IQR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
C8051F586-AM
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
C8051F502-IM
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
C8051F586-IM Valeurs maximales et caractéristiques électriques
| Device Type | 8-bit 8051-compatible mixed-signal microcontroller |
| Fréquence d'horloge maximale | 50 MHz |
| System Clock | 24 MHz |
| Instruction Throughput | 50 MIPS |
| Flash Memory | 96 KB |
| Internal Data RAM | 256 bytes |
| XDATA RAM | 8 KB |
| General-Purpose I/O | 24 lines |
| Tension d'alimentation | 5 V |
| CAN Interface | CAN 2.0 |
| LIN Interface | LIN 2.1 |
| Serial Interfaces | SPI, I2C, and 2 UARTs |
| Timer/Counter Counters | 6 16-bit timer/counters |
| Programmable Counter Arrays | 2 PCA modules with 12 compare/capture channels |
| Interrupt Structure | 2 interrupt levels and 23 interrupt sources |
| System Peripherals | Watchdog timer and real-time clock |
| Programming | In-system programmable |
| Boîtier | 32-QFN, 5 mm x 5 mm |
| Type de montage | Surface mount |
Guide de configuration des broches du C8051F586-IM 32-qfn, 5 mm x 5 mm
Configuration des broches du C8051F586-IM (boîtier 32-qfn, 5 mm x 5 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour C8051F586-IM.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
C8051F586-IM convient pour 6 applications: LIN-to-CAN Automotive Gateway, Body Control and Lighting Module, Industrial CAN Sensor Node, Motor and Actuator Controller, Distributed Sensor and IO Controller, Embedded Communication Controller.
LIN-to-CAN Automotive Gateway
The C8051F586-IM fits a compact gateway that must bridge LIN 2.1 and CAN 2.0 networks. Its 50 MHz clock and 50 MIPS throughput provide processing margin for protocol conversion, message filtering, diagnostics, and supervisory logic, while 96 KB of Flash stores routing tables and application firmware. The 8 KB of XDATA RAM supports receive buffers, transmit queues, and state-machine data without requiring an external memory device. Its 32-QFN package keeps the controller compact for body electronics and distribution boxes. The 24 I/O lines can also support discrete control signals. A production implementation must follow the manufacturer pin and exposed-pad layout, isolate communication routing from noisy power paths, and verify the exact qualification grade required by the vehicle program.
Recommandé
Body Control and Lighting Module
The C8051F586-IM is suitable for a body-control module that coordinates lighting, switch inputs, actuators, and vehicle-network messages. Its 24 I/O lines provide direct digital connectivity, six 16-bit timer/counters support accurate periodic or capture functions, and the two PCA modules add compare and capture channels for local timing tasks. The 50 MIPS execution rate allows communication handling and control logic to coexist within one 8-bit core. Its 96 KB of Flash accommodates diagnostics, configurable behavior, and update logic. Because the device is only 5 mm by 5 mm in a 32-QFN package, it supports compact electronics where PCB area is limited. Layout work should preserve the QFN exposed-pad connection, place supply decoupling close to the device, and keep switched-load paths separated from sensitive communication traces.
Recommandé
Industrial CAN Sensor Node
The C8051F586-IM can act as the communications and control center for an industrial sensor node that must publish measurements over CAN 2.0. Its 50 MHz clock and 50 MIPS throughput allow acquisition logic, filtering, diagnostics, and protocol processing to run without a separate communications processor. The 96 KB Flash capacity supports application firmware and protocol configuration, while 256 bytes of internal RAM and 8 KB of XDATA RAM cover working variables and message buffers. SPI and I2C can connect compatible sensors or configuration devices, and the two UART channels provide additional serial paths for local equipment. The compact 32-QFN package is advantageous in sealed or space-limited installations. Validate the final transceiver interface, isolation strategy, grounding, and operating-temperature requirements during hardware design.
Recommandé
Motor and Actuator Controller
The C8051F586-IM is appropriate for a compact actuator controller combining event timing, communications, and supervisory control. Six 16-bit timer/counters support precise intervals, pulse measurement, and periodic outputs, while the two PCA modules provide additional compare and capture channels. At 50 MIPS throughput, the 8-bit core can manage CAN or LIN traffic alongside control calculations and fault handling. The 24 I/O lines simplify connections to position sensors, limit switches, drivers, and status indicators, and the 8 KB of XDATA RAM provides space for motion state and diagnostic history. Its 32-QFN package reduces board footprint in space-constrained equipment. Power dissipation and transient behavior must be evaluated at the system level because motor and relay drivers can inject noise not represented by the microcontroller specifications.
Recommandé
Distributed Sensor and IO Controller
The C8051F586-IM works well as a distributed controller that gathers local digital and analog-related inputs before forwarding information over LIN or CAN. Its 24 I/O lines support multiple sensor-enable, logic, and status functions, while the programmable counter arrays and timer/counters provide capture and timing functions for pulses, frequency measurement, and scheduled outputs. At 50 MHz, the core can execute protocol handling alongside debouncing, filtering, and local state management. The 96 KB of Flash allows substantial device-level logic to remain local, reducing traffic over the vehicle or industrial network. A 5 mm by 5 mm 32-QFN helps standardize compact sensor modules. Designers should establish a common ground reference, use appropriate protection for external wiring, and separate long harness connections from high-speed digital traces.
Recommandé
Embedded Communication Controller
The C8051F586-IM can consolidate several low-speed communication tasks in one embedded controller. CAN 2.0 and LIN 2.1 handle network traffic, two UARTs support independent point-to-point links, and SPI and I2C connect sensors, memory, and configuration peripherals. The 50 MHz clock and 50 MIPS throughput provide ample instruction bandwidth for framing, filtering, protocol conversion, and local control, while the watchdog timer supports independent system supervision. Its 96 KB Flash and 8 KB XDATA RAM are useful for stack variables, protocol state, and local buffering. The 32-QFN package limits board area and simplifies integration into compact gateways or data concentrators. Production routing should include controlled clock and supply nets, short return paths, and protection appropriate to the external communication medium.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour C8051F586-IM — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | C8051F586-IMR | C8051F586-IQ | C8051F586-IQR | C8051F586-AM | C8051F502-IM |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 32-QFN (5x5 mm) | 32-QFN (5x5 mm) | 32-QFN (5x5 mm) | 32-QFN (5x5 mm) | 32-QFN (5x5 mm) | 32-QFN (5x5 mm) |
| Processor Core | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit |
Principaux différenciateurs
- Combined CAN and LIN connectivity (vs C8051F502-IM)
- Higher documented processing margin (vs C8051F502-IM)
- 96 KB of Flash in a compact package (vs C8051F586-IMR)
- Eight-wire I/O expansion without changing the controller family (vs C8051F586-IQR)
Notes de conception
Use the manufacturer QFN-32 land pattern and exposed-pad connection exactly as specified for C8051F586. Place the required input and output decoupling capacitors adjacent to the corresponding supply pins, keep the exposed-pad connection short, and provide an uninterrupted ground plane beneath the package where permitted by the layout guidance. Confirm pin 1 orientation against the package drawing because the distributor summaries confirm the 32-QFN format but do not reproduce the complete numbered pin table.
Keep CAN, LIN, UART, SPI, and I2C routing away from switching nodes and high-current actuator outputs. Provide a continuous return path beneath communications traces and place any protection or transceiver components close to the connector where possible. The C8051F586 supports 24 I/O lines and multiple serial interfaces, but interface correctness still depends on controlled impedance, clean references, and separation from sources of transient noise.
Do not treat a shared 32-QFN package as proof that every C8051F586 ordering suffix is interchangeable. Confirm temperature grade, reel or tray format, automotive qualification, and the full ordering-code definition before releasing a substitution. For C8051F502-IM, also compare peripheral multiplexing, interrupt vectors, oscillator behavior, memory mapping, and register compatibility; a footprint match alone cannot establish firmware-level drop-in equivalence.
Plan the 5 V supply network for both the microcontroller and any attached communications transceivers. Use local high-frequency bypass in addition to bulk supply capacitance, and verify startup behavior across the complete input-voltage range used by the product. If the controller operates from a regulated automotive or industrial rail, account for transient protection upstream so that switching disturbances do not propagate directly into the MCU supply pins.
Informations de conformité
The C8051F586 family is described as automotive-capable, but the exact C8051F586-IM ordering grade and its compliance declarations must be confirmed in the manufacturer product documentation and material declaration before qualification.