CD4022BCN - 3-15V CMOS Divide-by-8 Counter | onsemi
MPN: CD4022BCN ✓ فعالCD4022BCN جائزہ
A Johnson counter is a shift-register-based counter that advances through a fixed sequence of states and provides one decoded output for each state. The CD4022BCN belongs to the CD4000 CMOS logic family, where CMOS logic ICs use complementary metal-oxide-semiconductor circuitry to support low-voltage operation. Within the broader hierarchy, it is a counter IC and divider within digital logic ICs.
The principal features include eight decoded outputs, a carry-out bit, positive-edge clock triggering, and operation from 3.0 V to 15 V. The carry output provides a divide-by-8 carry indication, allowing cascaded counters to implement larger multiples of eight. Its decoded outputs are useful when a system must activate one of eight positions or channels in sequence.
The CD4022BCN implements a four-stage Johnson shift register. Each positive clock edge shifts data through the register, and the decoded outputs follow the counter sequence. Because the device operates from the same 3.0 V to 15 V range as other CD4000-series logic, it can be combined with compatible CMOS gates, flip-flops, decoders, and timing circuits without requiring a separate high-voltage logic family.
Typical uses include eight-step sequencers, modulo-8 frequency dividers, timing generators, industrial control logic, and digital channel-selection circuits. An oscillator can drive the clock input when a variable or adjustable repetition rate is required, while the carry output can clock another counter when a higher division ratio is needed.
PCB design should preserve the standard 16-pin DIP pinout and provide adequate bypass capacitance close to the supply pins. Designers should also account for unused decoded outputs, clock-edge requirements, and the propagation delay between the clock edge and decoded-output transitions when sequencing time-sensitive external circuitry.
This product page consolidates the core electrical identity, verified package information, sourcing guidance, comparison parameters, and practical implementation considerations for engineers evaluating the CD4022BCN as a drop-in 16-PDIP counter.
کے لیے ڈراپ اِن متبادل CD4022BCN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں CD4022BCN (یکساں فارم فیکٹر اور فٹ پرنٹ).
CD4022BE
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →CD4022BEE4
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CD4022BF3A
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CD4022BCN زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | CMOS divide-by-8 counter IC |
| Counter Architecture | 4-stage Johnson counter |
| Number Of Counter Elements | 1 element |
| Counter Bit Count | 4 bit |
| Clock Edge | Positive edge |
| Supply Voltage Range | 3.0 V to 15 V |
| Decoded Output Count | 8 outputs |
| Carry Output | 1 carry-out bit |
| Division Ratio | Divide-by-8 |
| Logic Family | CD4000 CMOS series |
| پیکیج | 16-PDIP |
| ماؤنٹنگ ٹائپ | Through-hole |
CD4022BCN 16-pdip پن کنفیگریشن گائیڈ
CD4022BCN (16-pdip پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں CD4022BCN.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
CD4022BCN کے لیے موزوں ہے 6 ایپلیکیشنs: Eight-Step Sequence Controller, Modulo-8 Frequency Divider, Digital Channel Selector, Industrial Timing and Retrigger, Three-Decoded Relay Sequencer, Test and Measurement Step Generator.
Eight-Step Sequence Controller
The CD4022BCN fits an eight-step sequence controller because its 4-stage Johnson architecture provides eight decoded outputs in a 16-PDIP package. Each positive clock edge advances the decoded state, allowing one output to be active during each of eight timing intervals. The operating range of 3.0 V to 15 V supports both low-voltage control systems and conventional 5 V or 12 V industrial logic. Designers should use the decoded outputs to enable relays, drivers, or indicator stages in sequence. Unused outputs should be left unconnected or handled according to the manufacturer's input recommendations, and timing-sensitive loads should account for output propagation delay.
تجویز کردہ
Modulo-8 Frequency Divider
The CD4022BCN can divide an incoming clock by eight while operating from 3.0 V to 15 V, making it appropriate for clock conditioning and rate reduction. A stable input oscillator drives the clock pin, and the carry-out provides a periodic indication after each group of eight clock edges. This arrangement is useful when a digital subsystem needs a slower reference than the system oscillator. The available 3.0 V to 15 V range permits operation near common CMOS logic rails, but the clock source, maximum operating frequency, and propagation delay should be checked against the manufacturer's electrical characteristics before cascading multiple stages.
تجویز کردہ
Digital Channel Selector
The eight decoded outputs of the CD4022BCN make it practical to implement a rotating digital channel selector. A clock advances the counter, while the decoded lines indicate which of eight channels is active during each count interval. This arrangement can support stepped test equipment, sequential relay control, or eight-way sampling when suitable external drivers are added. The 16-PDIP package is useful where through-hole construction and serviceability are priorities. External interface circuits must respect the available output current and voltage levels, and unused decoded outputs should not be allowed to introduce excessive capacitive loading on the counter.
تجویز کردہ
Industrial Timing and Retrigger
The CD4022BCN can form part of an industrial timing or retrigger circuit using its eight decoded states and carry output. A trigger initializes the sequence, an oscillator advances it, and external logic interprets the decoded outputs as timing intervals. Its 3.0 V to 15 V supply range supports industrial control systems operating across common voltage rails. For safety-critical equipment, the output stages must provide the required isolation and current capacity because the counter itself is a logic IC rather than a power driver. Validate reset behavior, clock-edge timing, and maximum repetition rate against the device specifications before release.
تجویز کردہ
Three-Decoded Relay Sequencer
The CD4022BCN is appropriate for a three-decoded relay sequencer because each positive clock edge can advance the internal Johnson counter and change the active decoded output. A driver interface can translate the low-power logic signals into relay-control currents, while the carry-out marks completion of the eight-step sequence. The counter's 3.0 V to 15 V operating range allows it to coexist with compatible CMOS control logic. Relay coils, contact suppression, and isolation must be designed separately, and the switching transitions should be checked for unwanted overlap during changeover. The 16-PDIP package simplifies through-hole prototyping and repair.
تجویز کردہ
Test and Measurement Step Generator
The CD4022BCN can generate eight deterministic test steps in instrumentation because its decoded outputs advance after each positive clock edge. A system controller can use those outputs to select test points, enable measurement channels, or trigger fixture functions. The 3.0 V to 15 V operating range provides compatibility with common CMOS control systems, while the through-hole 16-PDIP package supports serviceable laboratory hardware. For precise timing, the instrument designer should use the clock period and propagation-delay data to establish setup and hold margins. Decoded outputs should not directly drive high-current displays or loads without suitable buffering.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا CD4022BCN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | CD4022BE | CD4022BEE4 | CD4022BF3A |
|---|---|---|---|---|
| Brand | onsemi | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-PDIP | 16-PDIP - same | 16-PDIP - same | 16-PDIP - same |
| Counter Architecture | 4-stage Johnson counter | CD4022 divide-by-8 counter | CD4022 divide-by-8 counter | CD4022 divide-by-8 counter |
| Decoded Output Count | 8 outputs | 8 outputs | 8 outputs | 8 outputs |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole |
اہم امتیازی خصوصیات
- Direct through-hole counter footprint (بمقابلہCD4022BNSR)
- Eight decoded outputs plus carry indication (بمقابلہSN74LS93DR)
- Broad CMOS supply compatibility (بمقابلہSN74LS90DR)
ڈیزائن نوٹس
Use the CD4022B family pin-description table to assign every 16-PDIP connection before routing the board. Keep the clock line away from the eight decoded output and carry traces where possible to prevent clock-edge coupling. Maintain a common ground reference across the counter and any logic devices whose outputs drive its inputs; otherwise input thresholds can become unreliable when supply noise changes the switching margin.
Place the required supply-bypass capacitor close to the device's supply and ground pins, with a short and low-inductance connection between the capacitor and the package. The counter supports a 3.0 V to 15 V operating range, but correct decoupling remains necessary because simultaneous switching across eight decoded outputs can create dynamic current pulses. Validate the power distribution network at the highest intended clock frequency and output loading.
Account for propagation delay between the active clock edge and each decoded-output transition when designing a sequence with adjacent timed states. Cascade stages only when the timing budget includes the clock-to-output delay of each counter. Do not assume that all decoded outputs change simultaneously; their transition timing should be taken from the manufacturer's electrical-characteristics tables.
Do not substitute CD4022BNSR directly for CD4022BCN: the former uses a 16-SO surface-mount package, while the target uses a 16-PDIP through-hole package. Even when the counter function matches, changing package type requires a PCB footprint, assembly-process, and pin-orientation review. For a production redesign, compare the complete pin map and electrical limits rather than relying on the CD4022B family name.
تعمیل کی معلومات
The CD4022BCN is a legacy CMOS logic IC; no explicit RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for this exact MPN.