CD4022BCN - 3-15V CMOS Divide-by-8 Counter | onsemi
料号: CD4022BCN ✓ 量产中CD4022BCN 概述
A Johnson counter is a shift-register-based counter that advances through a fixed sequence of states and provides one decoded output for each state. The CD4022BCN belongs to the CD4000 CMOS logic family, where CMOS logic ICs use complementary metal-oxide-semiconductor circuitry to support low-voltage operation. Within the broader hierarchy, it is a counter IC and divider within digital logic ICs.
The principal features include eight decoded outputs, a carry-out bit, positive-edge clock triggering, and operation from 3.0 V to 15 V. The carry output provides a divide-by-8 carry indication, allowing cascaded counters to implement larger multiples of eight. Its decoded outputs are useful when a system must activate one of eight positions or channels in sequence.
The CD4022BCN implements a four-stage Johnson shift register. Each positive clock edge shifts data through the register, and the decoded outputs follow the counter sequence. Because the device operates from the same 3.0 V to 15 V range as other CD4000-series logic, it can be combined with compatible CMOS gates, flip-flops, decoders, and timing circuits without requiring a separate high-voltage logic family.
Typical uses include eight-step sequencers, modulo-8 frequency dividers, timing generators, industrial control logic, and digital channel-selection circuits. An oscillator can drive the clock input when a variable or adjustable repetition rate is required, while the carry output can clock another counter when a higher division ratio is needed.
PCB design should preserve the standard 16-pin DIP pinout and provide adequate bypass capacitance close to the supply pins. Designers should also account for unused decoded outputs, clock-edge requirements, and the propagation delay between the clock edge and decoded-output transitions when sequencing time-sensitive external circuitry.
This product page consolidates the core electrical identity, verified package information, sourcing guidance, comparison parameters, and practical implementation considerations for engineers evaluating the CD4022BCN as a drop-in 16-PDIP counter.
直接替换替代料: CD4022BCN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
CD4022BE
✅ 直接替换联系询价
查看数据手册 →CD4022BEE4
✅ 直接替换📋 参考替代料(不在目录中)
CD4022BF3A
✅ 直接替换📋 参考替代料(不在目录中)
CD4022BCN 最大额定值与电气特性
| Product Type | CMOS divide-by-8 counter IC |
| Counter Architecture | 4-stage Johnson counter |
| Number Of Counter Elements | 1 element |
| Counter Bit Count | 4 bit |
| Clock Edge | Positive edge |
| Supply Voltage Range | 3.0 V to 15 V |
| Decoded Output Count | 8 outputs |
| Carry Output | 1 carry-out bit |
| Division Ratio | Divide-by-8 |
| Logic Family | CD4000 CMOS series |
| 封装 | 16-PDIP |
| 安装类型 | Through-hole |
CD4022BCN 16-pdip 引脚配置指南
CD4022BCN(16-pdip 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: CD4022BCN.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CD4022BCN 适用于 6 应用s: Eight-Step Sequence Controller, Modulo-8 Frequency Divider, Digital Channel Selector, Industrial Timing and Retrigger, Three-Decoded Relay Sequencer, Test and Measurement Step Generator.
Eight-Step Sequence Controller
The CD4022BCN fits an eight-step sequence controller because its 4-stage Johnson architecture provides eight decoded outputs in a 16-PDIP package. Each positive clock edge advances the decoded state, allowing one output to be active during each of eight timing intervals. The operating range of 3.0 V to 15 V supports both low-voltage control systems and conventional 5 V or 12 V industrial logic. Designers should use the decoded outputs to enable relays, drivers, or indicator stages in sequence. Unused outputs should be left unconnected or handled according to the manufacturer's input recommendations, and timing-sensitive loads should account for output propagation delay.
推荐
Modulo-8 Frequency Divider
The CD4022BCN can divide an incoming clock by eight while operating from 3.0 V to 15 V, making it appropriate for clock conditioning and rate reduction. A stable input oscillator drives the clock pin, and the carry-out provides a periodic indication after each group of eight clock edges. This arrangement is useful when a digital subsystem needs a slower reference than the system oscillator. The available 3.0 V to 15 V range permits operation near common CMOS logic rails, but the clock source, maximum operating frequency, and propagation delay should be checked against the manufacturer's electrical characteristics before cascading multiple stages.
推荐
Digital Channel Selector
The eight decoded outputs of the CD4022BCN make it practical to implement a rotating digital channel selector. A clock advances the counter, while the decoded lines indicate which of eight channels is active during each count interval. This arrangement can support stepped test equipment, sequential relay control, or eight-way sampling when suitable external drivers are added. The 16-PDIP package is useful where through-hole construction and serviceability are priorities. External interface circuits must respect the available output current and voltage levels, and unused decoded outputs should not be allowed to introduce excessive capacitive loading on the counter.
推荐
Industrial Timing and Retrigger
The CD4022BCN can form part of an industrial timing or retrigger circuit using its eight decoded states and carry output. A trigger initializes the sequence, an oscillator advances it, and external logic interprets the decoded outputs as timing intervals. Its 3.0 V to 15 V supply range supports industrial control systems operating across common voltage rails. For safety-critical equipment, the output stages must provide the required isolation and current capacity because the counter itself is a logic IC rather than a power driver. Validate reset behavior, clock-edge timing, and maximum repetition rate against the device specifications before release.
推荐
Three-Decoded Relay Sequencer
The CD4022BCN is appropriate for a three-decoded relay sequencer because each positive clock edge can advance the internal Johnson counter and change the active decoded output. A driver interface can translate the low-power logic signals into relay-control currents, while the carry-out marks completion of the eight-step sequence. The counter's 3.0 V to 15 V operating range allows it to coexist with compatible CMOS control logic. Relay coils, contact suppression, and isolation must be designed separately, and the switching transitions should be checked for unwanted overlap during changeover. The 16-PDIP package simplifies through-hole prototyping and repair.
推荐
Test and Measurement Step Generator
The CD4022BCN can generate eight deterministic test steps in instrumentation because its decoded outputs advance after each positive clock edge. A system controller can use those outputs to select test points, enable measurement channels, or trigger fixture functions. The 3.0 V to 15 V operating range provides compatibility with common CMOS control systems, while the through-hole 16-PDIP package supports serviceable laboratory hardware. For precise timing, the instrument designer should use the clock period and propagation-delay data to establish setup and hold margins. Decoded outputs should not directly drive high-current displays or loads without suitable buffering.
推荐
推荐产品汇总
工程参考数据: CD4022BCN ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CD4022BE | CD4022BEE4 | CD4022BF3A |
|---|---|---|---|---|
| Brand | onsemi | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-PDIP | 16-PDIP - same | 16-PDIP - same | 16-PDIP - same |
| Counter Architecture | 4-stage Johnson counter | CD4022 divide-by-8 counter | CD4022 divide-by-8 counter | CD4022 divide-by-8 counter |
| Decoded Output Count | 8 outputs | 8 outputs | 8 outputs | 8 outputs |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole |
关键差异点
- Direct through-hole counter footprint (对比 CD4022BNSR)
- Eight decoded outputs plus carry indication (对比 SN74LS93DR)
- Broad CMOS supply compatibility (对比 SN74LS90DR)
设计说明
Use the CD4022B family pin-description table to assign every 16-PDIP connection before routing the board. Keep the clock line away from the eight decoded output and carry traces where possible to prevent clock-edge coupling. Maintain a common ground reference across the counter and any logic devices whose outputs drive its inputs; otherwise input thresholds can become unreliable when supply noise changes the switching margin.
Place the required supply-bypass capacitor close to the device's supply and ground pins, with a short and low-inductance connection between the capacitor and the package. The counter supports a 3.0 V to 15 V operating range, but correct decoupling remains necessary because simultaneous switching across eight decoded outputs can create dynamic current pulses. Validate the power distribution network at the highest intended clock frequency and output loading.
Account for propagation delay between the active clock edge and each decoded-output transition when designing a sequence with adjacent timed states. Cascade stages only when the timing budget includes the clock-to-output delay of each counter. Do not assume that all decoded outputs change simultaneously; their transition timing should be taken from the manufacturer's electrical-characteristics tables.
Do not substitute CD4022BNSR directly for CD4022BCN: the former uses a 16-SO surface-mount package, while the target uses a 16-PDIP through-hole package. Even when the counter function matches, changing package type requires a PCB footprint, assembly-process, and pin-orientation review. For a production redesign, compare the complete pin map and electrical limits rather than relying on the CD4022B family name.
合规信息
The CD4022BCN is a legacy CMOS logic IC; no explicit RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for this exact MPN.