CY7C68321C-56LTXC - USB 2.0 ATA Bridge | Infineon
MPN: CY7C68321C-56LTXC ✗ اختتامِ زندگیCY7C68321C-56LTXC جائزہ
A USB-to-ATA bridge is an interface controller that lets a USB host communicate with storage hardware that uses the parallel ATA/ATAPI command and data interface. Within the product hierarchy, the CY7C68321C is a USB interface transceiver and protocol bridge, placing it between USB host controllers and conventional storage peripherals. Its role is to translate USB transactions into compatible ATA/ATAPI operations rather than regulate power or perform storage computation.
Key characteristics include full-speed and high-speed USB operation, a 12 Mb/s low-speed connection rate, a 480 Mb/s high-speed connection rate, and operation from 0°C to 70°C. The non-lead-frame QFN package provides a surface-mount implementation for compact storage peripherals, dongles, and embedded USB storage equipment. The exposed pad supports thermal conduction from the device into the PCB copper area.
The interface architecture makes the CY7C68321C-56LTXC suitable for systems where an embedded storage device must appear as a USB peripheral. Its 24 MHz maximum operating frequency accommodates USB traffic handling and associated interface timing, while the dedicated bridge function reduces the need for an external USB-to-ATA controller. System designers should still validate protocol timing, media compatibility, and power requirements during prototype testing.
Typical implementations include USB-connected removable storage, industrial data-collection equipment, compact embedded storage modules, legacy peripheral upgrade systems, and USB storage adapters. The part is particularly relevant where a board design requires a direct USB-to-ATA interface rather than a general-purpose USB hub or a bridge based on a different storage protocol.
PCB layout is critical around high-speed USB and exposed-pad thermal connections. Place the USB differential pair as a short impedance-controlled route, provide the decoupling specified by the manufacturer datasheet, and connect the exposed pad to an uninterrupted ground-copper region. Validate USB eye diagrams, enumeration behavior, ATA signal integrity, and enclosure or cable reliability in the final system.
This page combines the USB interface, package, temperature, and speed characteristics of the CY7C68321C-56LTXC with application guidance, comparison criteria, and practical replacement considerations. It also identifies where design validation is still required, including exact pin assignments, lifecycle status, environmental qualifications, and protocol-level compatibility of candidate replacements.
کے لیے ڈراپ اِن متبادل CY7C68321C-56LTXC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں CY7C68321C-56LTXC (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type, Package Dimensions, USB Interface, Device Type.
CY7C68321C-56LFXC
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →CY7C68300C-56LTXC
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →CY7C68300B-56LFXC
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →CY7C68321C-56LTXC تفصیلات
| Device Type | USB 2.0 to ATA/ATAPI bridge controller |
| Maximum Operating Frequency | 24 MHz |
| Low-Speed USB Data Rate | 12 Mb/s |
| High-Speed USB Data Rate | 480 Mb/s |
| USB Protocol Support | USB 2.0 |
| USB Speed Support | Full-speed and high-speed |
| آپریٹنگ درجہ حرارت رینج | 0°C to 70°C |
| پیکیج | 56-pin QFN exposed-pad, 8 mm x 8 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| Lead Frame | Non-lead-frame |
| Interface Function | USB-to-ATA USB 2.0 bridge |
| Peripheral Interface | ATA/ATAPI |
| پنز کی تعداد | 56 pins |
| Exposed Pad | Present |
CY7C68321C-56LTXC 56-pin qfn exposed-pad, 8 mm x 8 mm پن کنفیگریشن گائیڈ
CY7C68321C-56LTXC (56-pin qfn exposed-pad, 8 mm x 8 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں CY7C68321C-56LTXC.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
CY7C68321C-56LTXC کے لیے موزوں ہے 6 ایپلیکیشنs: USB Removable Storage Adapter, Embedded USB Storage Module, Industrial Data Collection Equipment, USB-to-ATA Peripheral Upgrade, Compact USB Storage Adapter, USB Storage Test and Validation Fixture.
USB Removable Storage Adapter
The CY7C68321C-56LTXC fits a removable-storage adapter because it provides a dedicated USB 2.0 to ATA/ATAPI bridge with 12 Mb/s and 480 Mb/s signaling rates. Place the controller between the USB connector and storage device so the host can enumerate the media without requiring the storage subsystem to implement USB directly. Its 24 MHz maximum operating frequency supports the bridge timing requirements identified in the manufacturer datasheet. The commercial 0°C to 70°C rating suits room-temperature adapters, while the exposed-pad package requires a continuous ground-copper region for heat removal. Validate connector enumeration, suspend and resume behavior, ATA master timing, cable loss, and power-cycling with the intended drive.
تجویز کردہ
Embedded USB Storage Module
An embedded USB storage module can use the CY7C68321C-56LTXC to bridge a USB host to an ATA/ATAPI storage device on a compact circuit assembly. The device supports USB 2.0 full-speed and high-speed operation, allowing a design to select 12 Mb/s or 480 Mb/s according to the host link and cable environment. Its 56-pin QFN exposed-pad package reduces board footprint compared with a larger leaded bridge and helps thermal energy move into the PCB. According to the manufacturer datasheet, the maximum operating frequency is 24 MHz and the commercial temperature range is 0°C to 70°C. Prototype testing should cover host compatibility, media initialization, abnormal cable removal, and recovery after bus reset.
تجویز کردہ
Industrial Data Collection Equipment
The CY7C68321C-56LTXC can serve as the storage interface in industrial data-collection equipment that records locally and transfers data through a USB host. Its USB 2.0 high-speed capability of 480 Mb/s supports faster transfers than the 12 Mb/s low-speed mode, while the ATA/ATAPI side provides a conventional storage-device interface. The 0°C to 70°C rating covers typical indoor industrial environments but does not by itself qualify the part for wider temperature zones. Use a short USB differential pair, provide local decoupling, and couple the exposed pad to a solid ground region. Qualification should include sustained transfer activity, connector cycling, power integrity, and thermal testing at the highest expected enclosure temperature.
تجویز کردہ
USB-to-ATA Peripheral Upgrade
The CY7C68321C-56LTXC is appropriate for upgrading an existing peripheral that exposes an ATA/ATAPI interface and needs USB connectivity. The bridge function allows a USB host to access the peripheral through USB 2.0 without redesigning the storage side as a native USB device. Both 12 Mb/s and 480 Mb/s USB rates are supported, giving the designer flexibility between link robustness and transfer performance. According to the manufacturer datasheet, the controller has a 24 MHz maximum operating frequency. During reuse of an older board, verify every power, ground, clock, configuration, and signal pin against the official pin table because a matching 56-pin outline alone does not guarantee that the two bridge variants are interchangeable.
تجویز کردہ
Compact USB Storage Adapter
The CY7C68321C-56LTXC supports a compact USB storage adapter where board area and connector placement are constrained. Its 56-pin QFN exposed-pad package is 8 mm by 8 mm and uses a non-lead-frame surface-mount construction. The controller bridges USB 2.0 to ATA/ATAPI, with full-speed operation at 12 Mb/s and high-speed operation at 480 Mb/s available to the system designer. The maximum operating frequency of 24 MHz provides the stated timing reference for bridge operations. Place input and output decoupling close to their associated supply pins, preserve differential-pair geometry, and avoid placing disruptive switching paths beneath the USB pair. Validate signal integrity with the final connector, cable, enclosure, and storage device.
تجویز کردہ
USB Storage Test and Validation Fixture
The CY7C68321C-56LTXC can be used in a USB storage test fixture that exposes an ATA/ATAPI device to a USB host for compatibility and performance testing. Its support for 12 Mb/s and 480 Mb/s allows both full-speed and high-speed links to be exercised when the host and peripheral configuration permit them. The 24 MHz maximum operating frequency and 0°C to 70°C operating range make it suitable for a commercial-temperature test fixture. The same-package format also supports compact fixture construction and repeatable exposed-pad thermal layouts. During test-fixture development, verify hot-plug behavior, inrush current, abnormal disconnect handling, media enumeration, sustained-transfer stability, and repeatability across different storage devices.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا CY7C68321C-56LTXC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | CY7C68321C-56LFXC | CY7C68300C-56LTXC | CY7C68300B-56LFXC |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 56-pin QFN exposed-pad (8x8 mm) | 56-pin QFN exposed-pad (8x8 mm) - same | 56-pin QFN exposed-pad (8x8 mm) - same | 56-pin QFN exposed-pad (8x8 mm) - same |
| Function | USB 2.0 to ATA/ATAPI bridge | CY7C68321C USB-to-ATA AT2LP bridge | USB-to-ATA AT2LP bridge | USB-to-ATA AT2LP bridge |
اہم امتیازی خصوصیات
- Dedicated USB-to-ATA bridge function (بمقابلہCY7C68300C-56LTXC)
- Same CY7C68321C family with alternate suffix (بمقابلہCY7C68321C-56LFXC)
- Commercial-temperature operation with USB 2.0 high speed (بمقابلہCY7C68300B-56LFXC)
ڈیزائن نوٹس
Route the USB differential pair as a short, continuous 90-ohm differential path from the bridge to the USB connector, with no stubs or test pads that materially disturb impedance. Follow the manufacturer land pattern for all 56 terminals and the exposed pad. Keep the USB pair away from switching nodes and high-current return paths. A common layout error is treating the exposed pad as an optional thermal feature rather than part of the package design; attach it to the intended ground network and maintain uninterrupted ground copper beneath and around the device.
Place the decoupling network prescribed by the manufacturer datasheet directly beside the corresponding power and ground pins. Keep supply and return connections short, and avoid sharing narrow copper paths between noisy loads and the bridge. Check USB bus and ATA interface voltage levels before adding external components. Estimated: because the accessible manufacturer material does not state input-voltage tolerances or capacitor values, no component values or dissipation calculation are assumed; use the official electrical-characteristics and layout sections for implementation.
Use the exposed pad as the principal thermal path from the IC into the PCB. Provide a solid ground-copper region, thermal vias where the package construction and land pattern permit them, and adequate copper away from the board edge. Monitor temperature during sustained USB transfers because a bridge operating continuously beside a storage device can combine protocol activity with power-conversion heat. Estimated: no junction-temperature calculation is possible without confirmed supply voltage, load dissipation, and board thermal data; verify the final design with thermocouples or thermal imaging.
Do not treat a shared 56-pin QFN outline as proof of pin-to-pin interchangeability. Before using CY7C68321C-56LFXC, CY7C68300C-56LTXC, or CY7C68300B-56LFXC as a replacement, compare every power pin, ground pin, USB signal, ATA signal, clock input, configuration input, exposed-pad connection, operating-voltage limit, and temperature rating. Also compare firmware and USB descriptor behavior. A successful fit in the same footprint does not compensate for a changed pin function or protocol requirement.
تعمیل کی معلومات
The device is a commercial-temperature USB interface bridge rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer environmental documentation.