Maxim Integrated

DG411AK - Quad SPST 30 Ohm Analog Switch | Maxim Integrated

MPN: DG411AK ✓ فعال
30 ohm Rds(on) 16-pin CERDIP Package
MOQ: 1 |

DG411AK جائزہ

The Maxim Integrated DG411AK is a quad, independently controlled SPST analog switch with four 1:1 channels, a typical on-resistance of 30 ohms, and a 16-pin CERDIP package. The device is intended for military-temperature signal-routing applications and uses TTL- and CMOS-compatible control inputs. It provides a 16-terminal through-hole DIP-style package for systems that require a rugged, socketable analog switching element.

An analog switch is a semiconductor interface that connects or disconnects signal paths under digital control. The DG411AK belongs to the analog switch hierarchy, where each of its four single-pole, single-throw channels independently routes one signal. This makes the device useful where several precision or instrumentation signals must be selected, isolated, sampled, or connected to a common measurement chain. Unlike a mechanical relay, it changes state electronically without moving contacts.

Key characteristics include four independent SPST switches, 1:1 signal routing, 30-ohm on resistance, on-resistance matching to 3 ohms maximum, and guaranteed on-resistance flatness of 4 ohms maximum across the signal range. The matched resistance improves channel-to-channel consistency, which is important when several switches contribute to the same measurement path. TTL- and CMOS-compatible inputs simplify connection to older logic systems as well as modern control circuitry.

The DG411AK is specified as a military-grade part, and the A suffix identifies the package and temperature treatment associated with the DG411 family. Its 16-pin CERDIP construction is intended for through-hole PCB assembly rather than surface-mount production. Because the switches operate independently, one control signal can be asserted without changing the state of the other three channels, allowing partial signal-path isolation.

Typical uses include precision test and measurement systems, data-acquisition front ends, analog instrumentation, signal-routing matrices, and military or aerospace electronic assemblies. In a measurement system, the four channels can route different sensor or source signals into a common amplifier or converter. The matched on-resistance is especially useful when channel-dependent insertion error must remain small.

PCB design should preserve the pin arrangement defined by the manufacturer datasheet, provide adequate clearance around adjacent high-voltage or low-level signal paths, and route control traces away from sensitive analog nets. Because this is a through-hole military-temperature component, designers should also account for lead soldering, cleaning residue, vibration, and thermal cycling during system qualification. The 30-ohm resistance is appropriate for moderate-impedance instrumentation but may require a lower-resistance switch in high-bandwidth or high-precision applications.

This product page organizes the DG411AK electrical characteristics, package information, commercial sourcing workflow, genuine drop-in alternatives, and application-oriented design guidance for engineers evaluating or replacing this quad SPST analog switch.

کے لیے ڈراپ اِن متبادل DG411AK — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں DG411AK (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Mounting Type, Number of Switches, On-Resistance Flatness, Package.

Renesas Electronics
Mounting Type: Surface mount
Number of Switches: 4 switches
On-Resistance Flatness: 4 ohm maximum
موازنہ کریں DG411AK →

DG411AK/883B

✅ ڈراپ-اِن
📦 16-CDIP
Same four-channel SPST architecture and 16-CDIP package; the /883B ordering treatment differs from the DG411AK suffix.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DG411DJZ

✅ ڈراپ-اِن
📦 CDIP-16
Same four-channel SPST and 16-CDIP configuration; manufacturer and ordering suffix differ from DG411AK.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DG411DYZ

✅ ڈراپ-اِن
Renesas Electronics
📦 CDIP-16
4 switches · 4 x SPST · Normally closed · 35 ohm · 175 ns · 145 ns · 5 V to 34 V · ±15 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

DG411AK زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Switches 4
Switch Configuration 4 x SPST
Signal-to-Channel Ratio 1:1
On Resistance 30 ohm
On-Resistance Matching 3 ohm maximum
On-Resistance Flatness 4 ohm maximum across the signal range
Number of Terminals 16
پیکیج 16-pin CERDIP
Package Code DIP
Package Shape Rectangular
ماؤنٹنگ ٹائپ Through hole
Surface Mount No
Temperature Grade Military
Digital Input Compatibility TTL and CMOS compatible
Technology Monolithic CMOS

DG411AK rectangular پن کنفیگریشن گائیڈ

DG411AK (rectangular پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

DG411AK کے لیے rectangular پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں DG411AK.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

DG411AK کے لیے موزوں ہے 6 ایپلیکیشنs: Precision Data-Acquisition Front Ends, Military Test Equipment, Analog Instrumentation Signal Routing, Sensor Signal Multiplexing, Automated Test-System Routing, Aerospace Signal-Selection Networks.

📊

Precision Data-Acquisition Front Ends

The DG411AK fits data-acquisition front ends that must route several sensor or test signals into a shared amplifier or converter. Four independent SPST channels provide 1:1 paths, while the family's 3-ohm maximum on-resistance matching helps limit channel-to-channel insertion differences. The 30-ohm on resistance is suitable for moderate-impedance sources but should be compared with the source impedance and acquisition accuracy budget. With the 16-pin through-hole CERDIP package, the DG411AK also supports rugged instrument assemblies where leaded parts and straightforward socket replacement are preferred.

✈️

Military Test Equipment

The DG411AK is appropriate for military test equipment requiring four independently controlled signal paths in a through-hole package. Its military temperature grade and monolithic CMOS implementation fit controlled instrumentation environments where switching consistency matters. The 30-ohm resistance should be included in the gain and attenuation calculation for each routed channel, and the 3-ohm maximum matching specification can be used when defining allowable channel error. Verify program-specific qualification, traceability, and test documentation before incorporating the part into a qualified military configuration.

⚡

Analog Instrumentation Signal Routing

The DG411AK can route four independent analog signals in precision instruments where relay-size switching is undesirable and electronic control is preferred. Each 1:1 SPST channel can connect one source to a measurement amplifier without mechanically disturbing the signal path. The 30-ohm on resistance adds series impedance, so source buffering may be needed for high-impedance sensors or high-gain stages. The 16-pin CERDIP package makes the part straightforward to route on through-hole instrument boards and easy to replace during maintenance.

🧩

Sensor Signal Multiplexing

The DG411AK can independently connect up to four sensor signals into a common analog-processing chain. The SPST architecture provides isolation when a channel is turned off, while the matched on-resistance helps maintain consistent behavior among channels. For low-level sensors, the switch's 30-ohm contribution may be small relative to high source impedance, but it can become significant with low-impedance sensors. The design should also account for off leakage, switching transients, and the control-signal timing required by the surrounding ADC or instrumentation amplifier.

🏭

Automated Test-System Routing

The DG411AK supports automated test systems that route excitation, reference, or return signals among several circuit points. Four independently controlled SPST channels allow a controller to establish different test configurations without changing unrelated paths. Its 30-ohm resistance must be included when calculating signal attenuation and impedance interactions, while the 3-ohm matching limit helps predict channel-to-channel test variation. The leaded CERDIP construction is useful in long-life equipment where serviceability and stable through-hole assembly are priorities.

✈️

Aerospace Signal-Selection Networks

The DG411AK can be used in aerospace signal-selection networks where four channels must be routed under digital control and the assembly uses military-grade, through-hole components. The ceramic DIP package offers a mechanically robust assembly option, while monolithic CMOS switching provides compact control and consistent channel behavior. Engineers should verify the exact environmental limits, failure-mode requirements, and qualification obligations for the intended aircraft or space program. On-resistance variation, leakage, and control thresholds must remain within the worst-case analysis for the selected signal bandwidth and loading.

What is the DG411AK?
The DG411AK is a quad SPST analog switch with four independently controlled 1:1 channels, 30-ohm on resistance, and a 16-pin CERDIP package. According to the Maxim Integrated DG411 manufacturer datasheet, the DG411 family uses monolithic CMOS construction and provides TTL- and CMOS-compatible control inputs. It is the military-grade, through-hole member of the DG411 family rather than a surface-mount variant.
How many independent switches does DG411AK contain?
The DG411AK contains four independent single-pole, single-throw switches. Each channel provides a 1:1 signal path and can be controlled separately, allowing one signal to be connected or disconnected without changing the other three channels. This independent architecture is described in the Maxim Integrated DG411 datasheet and supports partial signal isolation, source selection, and test-signal routing.
What is the on resistance of DG411AK?
The DG411AK has a nominal on resistance of 30 ohms. The Maxim Integrated product listing identifies the device as a four-circuit 1:1 analog switch with 30-ohm on resistance. The family also specifies on-resistance matching within 3 ohms maximum and on-resistance flatness within 4 ohms maximum across the signal range, helping limit channel-dependent errors.
Is DG411AK pin compatible with DG411AK/883B?
Yes, the DG411AK and DG411AK/883B are identified as compatible alternatives sharing similar electrical characteristics and pin configurations, and both use 16-pin CDIP-style construction. The Maxim Integrated DG411 family documentation covers the underlying device family, while the package suffix distinguishes ordering and qualification treatments. Confirm the exact suffix, temperature requirements, and ordering information before substitution.
What is the best drop-in replacement for DG411AK?
The DG411AK/883B is a documented 16-CDIP replacement candidate for DG411AK because the compatibility listing identifies matching pin configurations and closely related electrical characteristics. DG411HSAK, DG411AK-E3, and DG411LAK also appear as compatible alternatives, but their package suffix should be checked against the required 16-pin CERDIP footprint. No single replacement should be approved solely from a generic cross-reference result.
Can Renesas DG411DJZ replace DG411AK?
The DG411DJZ is a strong drop-in candidate because the comparison identifies it as a four-channel SPST switch in a 16-pin CDIP package, matching the DG411AK's channel count, configuration, and through-hole package form. Verify the exact pin mapping and electrical limits in the relevant manufacturer datasheet, especially if the original circuit relies on military-temperature operation or specific switching logic levels.
When should I choose DG411AK over a lower-resistance analog switch?
Choose DG411AK when four independently controlled SPST channels, 30-ohm on resistance, and a military-temperature through-hole package are adequate for the signal path. Select a lower-resistance part when source impedance is high, signal bandwidth is demanding, or insertion error must be minimized. The DG411AK is better suited to moderate-impedance instrumentation than precision bridges or very high-frequency sampling networks.
Is DG411AK suitable for military instrumentation?
The DG411AK is listed with a military temperature grade and uses a 16-pin CERDIP package. According to the Maxim Integrated DG411 product page, the DG411 family is in production and is intended for controlled signal-routing functions. Qualification for a specific military program can require additional screening, traceability, certificate, or test documentation beyond the base ordering designation.
Where can I download the DG411AK datasheet PDF?
The official DG411 datasheet and product resources are available from the Analog Devices DG411 product page at https://www.analog.com/en/products/dg411.html. The DG411AK is covered by the DG411 family documentation. Use the pin-description table, electrical-characteristics table, and package drawings in that manufacturer datasheet when performing PCB layout or approving a replacement.
Where can I find the DG411AK pinout?
The authoritative DG411AK pinout is in the pin-description table of the Maxim Integrated DG411 manufacturer datasheet. The device has 16 terminals in a DIP-form factor, but control inputs, switch terminals, and exposed structures should be assigned from the exact datasheet rather than inferred from the four-channel description. The DG411AK package drawing should also be checked against the PCB footprint.
What can replace DG411AK?
Documented replacement candidates include the Analog Devices or Maxim Integrated DG411AK/883B, DG411HSAK, DG411AK-E3, and DG411LAK, along with the Renesas DG411DJZ and Intersil DG411DYZ in 16-CDIP form. Pin compatibility must be confirmed for the exact suffix and ordering package. A cross-reference identifies electrical and footprint similarity but does not automatically preserve qualification or sourcing conditions.
Is DG411AK the same as DG411DJZ?
The DG411AK and DG411DJZ are closely related quad SPST analog switches in 16-pin through-hole packages, but they are supplied by different manufacturers. The DG411DJZ comparison identifies a CDIP-16 package, four SPST channels, and a 1:1 configuration matching the DG411AK. Verify pin numbering, supply limits, control thresholds, on-resistance limits, and temperature qualification before treating the two as interchangeable.
What are the key specifications of DG411AK that engineers should know?
The key DG411AK specifications are four independent SPST channels, 1:1 routing, 30-ohm nominal on resistance, 3-ohm maximum on-resistance matching, 4-ohm maximum flatness, TTL- and CMOS-compatible control inputs, and a 16-pin military-grade CERDIP package. The Maxim Integrated DG411 datasheet also specifies monolithic CMOS technology, making the device suitable for controlled analog routing in military and instrumentation systems.
How do I buy DG411AK and check current lead time?
Use the Request a Quote form on this page to request current DG411AK availability, lead time, and order confirmation. The manufacturer's product page identifies the DG411 family as in production, but current inventory and production scheduling can change. Provide the exact DG411AK suffix, target quantity, and required package or qualification details when submitting the request.
What is the price of DG411AK?
Current DG411AK pricing is not shown as a static value because commercial terms and availability can change. Use the Request a Quote form on this page to obtain a current quotation for the exact MPN and quantity. The manufacturer product page also links to sample and purchase options, which can help establish the appropriate ordering channel.
Is DG411AK in stock?
Current DG411AK stock should be confirmed through the Request a Quote form on this page rather than inferred from a search listing. The exact suffix, package, quantity, and delivery schedule affect availability. The Maxim Integrated product page identifies the DG411 family as in production, which supports continued sourcing but does not constitute a current inventory guarantee.

کے لیے انجینئرنگ ریفرنس ڈیٹا DG411AK — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the DG411AK when the design needs four independently controlled SPST channels, approximately 30-ohm on resistance, TTL- or CMOS-compatible control, and a military-grade 16-pin CERDIP package. Its through-hole construction is particularly useful in rugged or serviceable through-hole assemblies. Select DG411AK/883B when that documented ordering and qualification treatment matches the program. Consider DG411DJZ or DG411DYZ when their exact manufacturer documentation confirms the required pinout and electrical limits; DG411DYZ is listed with a 35-ohm maximum resistance compared with the DG411AK's 30-ohm nominal rating. For high-precision, high-bandwidth, or low-impedance signal paths, use a lower-resistance switch family rather than treating the DG411AK as a universal replacement. Qualification, availability, and exact suffix requirements should be confirmed before releasing any substitute into production.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ DG411AK/883B DG411DJZ DG411DYZ
Package 16-pin CERDIP 16-CDIP CDIP-16 CDIP-16
Brand Maxim Integrated Analog Devices Renesas Electronics Renesas Electronics
Number of Switches 4 4 4 4
Switch Configuration 4 x SPST 4 x SPST 4 x SPST 4 x SPST
Signal-to-Channel Ratio 1:1 1:1 1:1 1:1
Mounting Style Through hole Through hole Through hole Through hole

اہم امتیازی خصوصیات

  • Four independently controlled SPST channels in a 16-pin through-hole package (بمقابلہDG411AK/883B)
  • Documented 30-ohm on-resistance for the exact DG411AK listing (بمقابلہDG411DYZ)
  • Family-level resistance matching and flatness (بمقابلہDG411DJZ)

ڈیزائن نوٹس

Include the 30-ohm on resistance in the complete signal-path calculation. Estimated insertion loss for a simple resistive divider is PLOAD divided by PLOAD plus 30 ohm; for example, a 1-kohm load produces an estimated loss of about 0.13 dB. Add switch leakage, capacitor effects, and amplifier input impedance when evaluating precision measurement accuracy. Use a lower-resistance switch if the calculated error exceeds the measurement budget.

Use the manufacturer package drawing and pin-description table when creating the 16-pin footprint. Confirm ceramic-DIP lead spacing, row geometry, and whether a center key or other package feature affects assembly. Keep analog switch traces short, provide a solid ground plane, and place the device close to the source and destination networks to minimize capacitive pickup and parasitic inductance.

Do not infer control polarity or switch-terminal orientation from the four-channel architecture. Use the exact DG411AK datasheet pinout to distinguish control inputs, common terminals, and switched terminals. Also avoid assuming that every DG411 suffix has the same package or qualification treatment; the AK, /883B, DJZ, and DYZ ordering designations must be checked against the PCB and procurement requirements.

Route digital control traces away from sensitive analog paths, especially when a control edge can couple a transient into a high-gain measurement node. Provide a low-impedance return path beneath digital routes, use a single ground strategy, and avoid long switch-node stubs. If the switched signal has high bandwidth or high amplitude, evaluate edge rate, off-isolation, and charge injection at the actual control-driver impedance.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The DG411AK is listed as a military-grade analog switch, but no specific RoHS, REACH, halogen-free, or conflict-minerals declaration is stated in the manufacturer page information.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

DG411AK datasheet DG411AK datasheet pdf DG411AK pinout DG411AK specifications DG411AK 16 pin CERDIP DG411AK 30 ohm switch DG411AK military grade DG411AK equivalent DG411AK replacement DG411AK cross reference DG411AK vs DG411DJZ Maxim Integrated DG411AK DG411AK price DG411AK stock where to buy DG411AK

متعلقہ اجزاء اور اصطلاحات

Maxim Integrated Analog Devices Renesas Electronics DG411AK DG411AK/883B DG411DJZ DG411DYZ quad SPST analog switch analog switch analog interface IC semiconductor monolithic CMOS TTL-compatible input CMOS-compatible input on resistance on-resistance matching on-resistance flatness 16-pin CERDIP ceramic DIP through-hole package military temperature grade signal routing data acquisition test and measurement instrumentation amplifier
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں