Texas Instruments

DS90LV017ATM-NS - 600 Mbps LVDS Driver | Texas Instruments

MPN: DS90LV017ATM-NS ✓ فعال
3.3 V Vdss Minimized; exact current not stated Id 8-lead SOIC Package >300 MHz Speed
MOQ: 1 |

DS90LV017ATM-NS جائزہ

The Texas Instruments DS90LV017ATM-NS is a single-channel, current-mode LVDS differential driver designed for data rates exceeding 600 Mbps, or 300 MHz, in an 8-lead SOIC package. It operates from a 3.3 V supply and produces a typical differential output swing of ±355 mV, providing a compact interface for high-speed point-to-point digital links.

An LVDS driver is a differential-signaling interface device that converts a low-voltage single-ended logic input into two complementary outputs whose voltage difference carries the data. Current-mode LVDS drivers combine high-speed operation with controlled output current, reduced power dissipation, and low electromagnetic interference. The DS90LV017A family therefore belongs to the hierarchy of interface ICs, line drivers, LVDS transceivers, and semiconductor interface components.

The device supports switching rates above 600 Mbps and uses a 3.3 V power supply. Differential skew is typically 0.3 ns and limited to 0.7 ns under specified conditions. Maximum propagation delay is 1.5 ns, helping preserve timing margin in high-speed point-to-point systems. The typical differential output swing of 355 mV and minimized short-circuit fault current support reliable operation while reducing power dissipation at elevated signaling rates.

The current-mode architecture keeps dissipation low even at high frequency and avoids the voltage-dependent behavior associated with some older driver approaches. Differential signaling also provides rejection of common-mode noise, while the compact 8-lead SOIC footprint simplifies routing from logic circuitry to a balanced connector or cable interface. The flow-through pin arrangement supports straight-through PCB signal paths and can reduce trace turns on critical high-speed links.

Typical uses include clock distribution, high-speed serial data links, industrial control interfaces, instrumentation, test-and-measurement equipment, and embedded systems that transmit one LVDS signal over a controlled point-to-point route. The driver can be paired with a compatible LVDS receiver such as the DS90LV018A, allowing a transmitting endpoint and receiving endpoint to implement a balanced differential link.

PCB implementation should preserve a short, continuous differential path with closely matched trace lengths and a continuous ground reference. Decoupling capacitors should be connected directly between the supply and ground pins. The differential output should terminate according to the receiver and transmission-line requirements rather than adding arbitrary resistive loading that could increase edge degradation or reduce signal margin.

This page combines the manufacturer's interface specifications with practical package, timing, application, and replacement guidance. It also highlights the distinction between electrically equivalent orderable variants and the conditions under which a same-footprint substitution preserves signal timing, supply requirements, and board-level implementation.

کے لیے ڈراپ اِن متبادل DS90LV017ATM-NS — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں DS90LV017ATM-NS (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Short-Circuit Fault Current.

Texas Instruments
Package: 8-pin SOIC narrow
Short-Circuit Fault Current: Minimized
موازنہ کریں DS90LV017ATM-NS →

DS90LV017ATM

✅ ڈراپ-اِن
Texas Instruments
📦 8-lead SOIC
Single high-speed differential LVDS driver · EIA-644-A and TIA-644-A · 3.3 V · >600 Mbps · >300 MHz · Current-mode differential driver · Minimized · Designed to remain low at high frequency

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

DS90LV017ATM/NOPB

✅ ڈراپ-اِن
📦 8-lead SOIC
Same 3.3 V electrical ratings, greater-than-600-Mbps rate, 1.5 ns maximum delay, and 8-lead SOIC footprint; lead-finish ordering code differs

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DS90LV017AM

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-lead SOIC
Same DS90LV017A current-mode LVDS function and 3.3 V supply; rated data-rate and propagation-delay values are unchanged at 0%

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DS90LV017AMX

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-lead SOIC
Same DS90LV017A electrical ratings and 8-lead SOIC land pattern; ordering code differs only in production packaging configuration, with 0% change in stated speed or voltage

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DS90LV017ATMX/NOPB

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-lead SOIC
Same greater-than-600-Mbps LVDS driver, 3.3 V supply, 1.5 ns maximum propagation delay, and 8-lead SOIC footprint; production packaging and lead-finish codes differ

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DS90LV017ATM-NS تفصیلات

Product Type Single LVDS differential line driver
Number of Channels 1 channel
Logic Input Style 1/0 driver
Maximum Data Rate >600 Mbps
زیادہ سے زیادہ کلاک فریکوئنسی >300 MHz
سپلائی وولٹیج 3.3 V
Typical Differential Output Swing ±355 mV
Typical Differential Skew 0.3 ns
Maximum Differential Skew 0.7 ns
Maximum Propagation Delay 1.5 ns
Output Architecture Current-mode differential driver
Short-Circuit Fault Current Minimized; exact current not stated
پیکیج 8-lead SOIC
PCB Layout Flow-through pin arrangement
ماؤنٹنگ ٹائپ Surface mount

DS90LV017ATM-NS پن کنفیگریشن

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پن 1 VCC — Positive supply connection
پن 2 IN — Single-ended data input
پن 3 EN — Driver enable input
پن 4 GND — Ground connection
پن 5 NC — Not connected
پن 6 OUT- — Inverting differential output
پن 7 OUT+ — Non-inverting differential output
پن 8 NC — Not connected

عام استعمالات

DS90LV017ATM-NS کے لیے موزوں ہے 6 ایپلیکیشنs: High-Speed Point-to-Point Data Links, Clock Distribution, Industrial Control Interfaces, Test and Measurement Instrumentation, Instrumentation and Sensor Signal Paths, Embedded Serial Communication.

🌐

High-Speed Point-to-Point Data Links

The DS90LV017ATM-NS fits point-to-point digital links that require data rates above 600 Mbps but only one transmitted differential signal. Its current-mode architecture supports low power dissipation at high frequency, while the typical 355 mV differential swing provides a compact LVDS interface. The 0.3 ns typical differential skew and 1.5 ns maximum propagation delay help preserve source-to-sink timing margin. Place the driver near the transmitting logic, route the differential pair over a continuous reference plane, and pair it with a compatible receiver such as the DS90LV018A.

🖥️

Clock Distribution

The DS90LV017ATM-NS is suitable for transmitting a high-frequency differential clock when edge-to-edge alignment is important. It supports signaling above 300 MHz, with differential skew typically limited to 0.3 ns and to 0.7 ns under the manufacturer's maximum specification. Its 3.3 V current-mode output reduces power dissipation as clock activity increases. Use short matched traces, maintain a continuous ground reference, and include receiver and connector delays in the system-level skew budget.

🏭

Industrial Control Interfaces

The DS90LV017ATM-NS can provide the transmitter side of a noise-resistant balanced link in industrial control equipment. LVDS differential signaling rejects common-mode disturbance better than a single-ended interface, while the greater-than-600-Mbps capability supports high-rate command or status channels. The 3.3 V supply and compact 8-lead SOIC package simplify integration near control logic. Keep the differential pair tightly coupled, provide local supply bypassing, and verify cable, connector, and receiver characteristics in the final channel.

🔧

Test and Measurement Instrumentation

The DS90LV017ATM-NS suits test and measurement modules that must transfer timing-sensitive data over a balanced cable or board-level channel. Its 0.3 ns typical differential skew and 1.5 ns maximum propagation delay support deterministic timing analysis, while the current-mode output maintains low dissipation at high data activity. The flow-through 8-lead SOIC arrangement also supports compact routing. Designers should still account for probe loading, connector transitions, cable loss, and the selected receiver's input threshold.

🧩

Instrumentation and Sensor Signal Paths

The DS90LV017ATM-NS can transmit data from a remote instrumentation or sensor module where the cable may encounter electrical noise. Differential current-mode signaling provides a typical ±355 mV output and supports rates above 600 Mbps for high-resolution measurement data. Its compact 8-lead SOIC package and flow-through layout reduce routing complexity near sensor-processing logic. Use a receiver with suitable input thresholds, terminate as required by the channel design, and preserve closely matched differential impedance throughout the cable and connector transition.

📱

Embedded Serial Communication

The DS90LV017ATM-NS is appropriate for embedded systems that require a fast, balanced, point-to-point communication channel between two circuit boards. The greater-than-600-Mbps capability accommodates serialized data while differential signaling improves common-noise tolerance. A 3.3 V current-mode driver limits power dissipation as transfer activity rises, and the 8-lead SOIC package supports compact layouts. Choose a compatible receiver, preserve impedance continuity across connectors or flex circuits, and include board skew in the timing specification.

تجویز کردہ پروڈکٹس کا خلاصہ

DS90LV018A Companion single-line LVDS receiver استعمال ہوتا ہے: High-Speed Point-to-Point Data Links, Clock Distribution, Industrial Control Interfaces, Test and Measurement Instrumentation, Instrumentation and Sensor Signal Paths, Embedded Serial Communication DS90LV032A TI LVDS receiver family for compatible links استعمال ہوتا ہے: High-Speed Point-to-Point Data Links, Industrial Control Interfaces, Instrumentation and Sensor Signal Paths DS90LV028A TI differential receiver family member استعمال ہوتا ہے: Clock Distribution, Test and Measurement Instrumentation, Embedded Serial Communication
What is the DS90LV017ATM-NS?
The DS90LV017ATM-NS is a single-channel, current-mode LVDS differential driver in an 8-lead SOIC package. According to the Texas Instruments DS90LV017A product information, it is optimized for high-data-rate, low-power point-to-point links and supports data rates in excess of 600 Mbps, equivalent to more than 300 MHz. Its differential outputs use the standard ±355 mV typical signaling amplitude.
What is the maximum data rate of DS90LV017ATM-NS?
The DS90LV017ATM-NS supports data rates in excess of 600 Mbps and signaling frequencies above 300 MHz. The Texas Instruments DS90LV017A product page describes it as a current-mode driver whose low power dissipation is maintained even at high frequency. This performance makes it appropriate for high-speed clock and data links where propagation delay and differential skew must remain controlled.
What is the supply voltage of DS90LV017ATM-NS?
The DS90LV017ATM-NS is designed for a 3.3 V power supply. According to the Texas Instruments DS90LV017A datasheet information, the device combines this 3.3 V operating rail with a typical differential output swing of ±355 mV. Its current-mode output architecture also minimizes short-circuit fault current and helps keep power dissipation low at elevated data rates.
Where can I download the DS90LV017ATM-NS datasheet PDF?
The DS90LV017ATM-NS datasheet can be downloaded through the official Texas Instruments DS90LV017A product page or its linked manufacturer PDF. The manufacturer guidance identifies the device as an 8-lead SOIC single LVDS driver and provides the detailed electrical characteristics, timing information, and pin-description material required for PCB design. Use the manufacturer document for the applicable suffix and ordering code.
Where can I find the DS90LV017ATM-NS pinout?
The DS90LV017ATM-NS pinout is documented in the pin-description table of the Texas Instruments DS90LV017A manufacturer datasheet. The device uses an 8-lead SOIC package and a flow-through arrangement intended to simplify high-speed PCB routing. Assign PCB nets from the manufacturer's pin table rather than inferring connections from package position or an unverified third-party drawing.
What is the propagation delay of DS90LV017ATM-NS?
The maximum propagation delay of the DS90LV017ATM-NS is 1.5 ns. According to the Texas Instruments DS90LV017A timing information, differential skew is typically 0.3 ns and has a maximum value of 0.7 ns. These timing figures should be checked together with receiver delay and trace propagation when budgeting the timing margin of a complete LVDS link.
Can DS90LV017ATM-NS replace DS90LV017ATM?
The DS90LV017ATM-NS and DS90LV017ATM identify the same DS90LV017A electrical family in an 8-lead SOIC configuration, but the suffix and orderable-code details should be confirmed before production substitution. The safest replacement decision is based on the manufacturer ordering table, including package, temperature grade, reel configuration, and lead-finish code. The two MPNs may be electrically equivalent without sharing every purchasing or assembly attribute.
What is the best drop-in replacement for DS90LV017ATM-NS?
The closest drop-in choices are orderable variants of the Texas Instruments DS90LV017A family that retain the 8-lead SOIC footprint and the same LVDS driver electrical function. Confirm supply voltage, data rate, propagation delay, differential skew, temperature grade, and package suffix against the manufacturer datasheet before replacing the part. No unrelated multi-channel receiver or differently pinned LVDS device should be treated as a direct replacement.
DS90LV017ATM-NS vs DS90LV017ATM/NOPB — which is better?
DS90LV017ATM-NS and DS90LV017ATM/NOPB belong to the same DS90LV017A driver family and use the same 8-lead SOIC electrical platform. The selection should be based on the exact orderable suffix, including lead-finish and production requirements, rather than an assumed difference in speed or signal quality. Both family devices support operation above 600 Mbps with a 3.3 V supply.
When should I choose DS90LV017ATM-NS over another LVDS driver?
Choose DS90LV017ATM-NS when a design requires a single, low-power, current-mode LVDS driver operating from 3.3 V at more than 600 Mbps in a compact 8-lead SOIC. Its 0.3 ns typical differential skew, 0.7 ns maximum skew, and 1.5 ns maximum propagation delay are appropriate for timing-sensitive point-to-point links. A different driver is preferable when its channel count, supply range, package, or interface standard better matches the system.
Is DS90LV017ATM-NS suitable for clock distribution?
Yes, DS90LV017ATM-NS is suitable for high-speed clock distribution when the link is point-to-point and operates within the device's 3.3 V supply and greater-than-600-Mbps capability. The low differential skew of 0.3 ns typical helps preserve clock-edge alignment between outputs in related channels. Board-level skew, return-path continuity, receiver tolerance, and connector effects must also be included in the timing budget.
How much power does DS90LV017ATM-NS dissipate?
The exact DS90LV017ATM-NS dissipation depends on supply voltage, data activity, output load, termination, frequency, and ambient conditions, so a fixed value cannot be assigned without those operating details. The manufacturer describes the current-mode architecture as keeping power dissipation low even at high frequency and minimizing short-circuit fault current. Use the datasheet supply-current and output-waveform information for a worst-case board calculation.
Is DS90LV017ATM-NS RoHS compliant?
The RoHS status must be confirmed for the exact DS90LV017ATM-NS orderable code before treating the device as compliant. RoHS terminology distinguishes restricted-substance requirements, while lead-free finish is a related but separate purchasing attribute. The manufacturer product page and the declaration associated with the selected order code should govern the compliance decision for production releases.
Where to buy DS90LV017ATM-NS online?
Use the Request a Quote form on this page to request DS90LV017ATM-NS availability, unit pricing, quantity breaks, and lead time. Quote requests should identify the required reel or tray configuration, production quantity, and any date-code or traceability requirements. The manufacturer product page is the appropriate source for confirming device status and ordering-code details.
What is the price and lead time for DS90LV017ATM-NS?
Current DS90LV017ATM-NS pricing and lead time are available through the Request a Quote form on this page. Submit the required quantity and package or reel configuration so the commercial offer can reflect the exact orderable assembly code. For production planning, request a date-code policy and written confirmation of the manufacturing and delivery schedule.
Is DS90LV017ATM-NS in stock?
DS90LV017ATM-NS stock status should be confirmed through the Request a Quote form on this page because availability can vary by order quantity, reel configuration, and production date code. The form allows the request to state whether scheduled deliveries are acceptable or whether allocation is required for a complete production lot. Use the returned schedule to coordinate component planning and testing.

کے لیے انجینئرنگ ریفرنس ڈیٹا DS90LV017ATM-NS — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose DS90LV017ATM-NS for a new 3.3 V design that needs one high-speed LVDS output, data rates above 600 Mbps, and an 8-lead SOIC footprint. Its 0.3 ns typical differential skew, 0.7 ns maximum skew, and 1.5 ns maximum propagation delay make it suitable for timing-sensitive point-to-point links, clock distribution, and high-speed embedded communication. DS90LV017ATM and DS90LV017ATM/NOPB are electrically aligned members of the same family and can be considered when their exact ordering and lead-finish requirements match the procurement plan. DS90LV017AM and DS90LV017AMX provide the same family-level electrical and package compatibility but require confirmation of the production ordering configuration. Treat different-pin LVDS drivers, multi-channel receivers, and devices with different supply ranges as functional alternatives rather than direct drop-in replacements. Regardless of ordering code, validate the complete channel with the selected receiver, connector, cable, PCB stackup, and intended data rate.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ DS90LV017ATM DS90LV017ATM/NOPB DS90LV017AM DS90LV017AMX DS90LV017ATMX/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-lead SOIC 8-lead SOIC 8-lead SOIC 8-lead SOIC 8-lead SOIC 8-lead SOIC
Product Type Single LVDS differential driver Single LVDS differential driver Single LVDS differential driver Single LVDS differential driver Single LVDS differential driver Single LVDS differential driver
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Maximum Data Rate >600 Mbps >600 Mbps >600 Mbps >600 Mbps >600 Mbps >600 Mbps
Maximum Clock Frequency >300 MHz >300 MHz >300 MHz >300 MHz >300 MHz >300 MHz
Typical Differential Skew 0.3 ns 0.3 ns 0.3 ns 0.3 ns 0.3 ns 0.3 ns
Maximum Differential Skew 0.7 ns 0.7 ns 0.7 ns 0.7 ns 0.7 ns 0.7 ns
Maximum Propagation Delay 1.5 ns 1.5 ns 1.5 ns 1.5 ns 1.5 ns 1.5 ns
Typical Differential Output Swing ±355 mV ±355 mV ±355 mV ±355 mV ±355 mV ±355 mV

اہم امتیازی خصوصیات

  • High-speed single-channel LVDS performance (بمقابلہDS90LV017ATM)
  • Controlled differential edge timing (بمقابلہDS90LV017ATM/NOPB)
  • Low-power current-mode output (بمقابلہDS90LV017AM)
  • Compact 8-lead SOIC implementation (بمقابلہDS90LV017AMX)

ڈیزائن نوٹس

Route OUT+ and OUT- as a closely coupled differential pair over a continuous ground plane. Avoid changing layer, adding stubs, or breaking symmetry between the outputs. The manufacturer's flow-through package arrangement is intended to support straight routing, so orient the device to minimize trace turns and keep the driver close to the logic source.

Do not treat the LVDS output as a conventional single-ended logic output or add an arbitrary resistive load at the transmitter. Use the termination required by the receiver and transmission-line configuration. Account for connector and cable impedance, receiver thresholds, and differential skew when calculating system timing; the device's 0.7 ns maximum differential skew is only one part of the total budget.

Connect the 3.3 V supply through a short, low-impedance trace and place the bypass capacitor directly between VCC and GND. Follow the manufacturer's pin-description and decoupling recommendations during PCB implementation. This is especially important because a supply disturbance at a greater-than-600-Mbps data rate can reduce receiver eye margin even when the LVDS differential amplitude is nominal.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Compliance status was not established for the exact DS90LV017ATM-NS orderable code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations against the manufacturer documentation for the selected suffix before production release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ds90lv017atm nopb DS90LV017ATM-NS datasheet DS90LV017ATM-NS pinout DS90LV017ATM-NS datasheet pdf DS90LV017ATM-NS equivalent DS90LV017ATM-NS replacement DS90LV017ATM-NS price DS90LV017ATM-NS stock DS90LV017ATM vs DS90LV017ATM/NOPB DS90LV017ATM 600 Mbps LVDS driver DS90LV017ATM 8-SOIC pinout DS90LV017A clock distribution

متعلقہ اجزاء اور اصطلاحات

Texas Instruments DS90LV017ATM-NS DS90LV017A DS90LV017ATM DS90LV017ATM/NOPB DS90LV017AM DS90LV017AMX DS90LV017ATMX/NOPB DS90LV018A DS90LV032A DS90LV028A LVDS Low Voltage Differential Signaling current-mode driver differential line driver interface IC semiconductor 8-lead SOIC surface-mount package 600 Mbps 300 MHz differential skew propagation delay 3.3 V power supply
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں