DSPIC33FJ09GS302-E/MM - 16-bit 40MIPS DSC 9KB Flash | Microchip
MPN: DSPIC33FJ09GS302-E/MM ✓ فعالDSPIC33FJ09GS302-E/MM جائزہ
A digital signal controller combines the computational core of a microcontroller with DSP-enhanced instructions such as single-cycle MAC, barrel shifting, and dual operand fetch. Within the power-management semiconductor hierarchy, the dsPIC33F family sits between general-purpose MCUs and dedicated power-supply controllers, providing fully programmable closed-loop control for switch-mode power conversion in a single chip.
Key features targeted at digital power include a high-speed PWM module with dead-time control and fault inputs, an on-chip ADC capable of sampling the power-conversion loop, and multiple analog comparators that support hardware-based overcurrent protection. The device operates from a 3.0V to 3.6V supply, making it compatible with standard 3.3V rails, and the -E/ extended-temperature suffix guarantees operation to +125C.
The GS-series architecture is purpose-built for SMPS: the PWM and ADC peripherals are tightly coupled so control-loop update rates can match converter switching frequencies, enabling average-current-mode and peak-current-mode control schemes in firmware rather than in analog circuitry.
Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages including the Microchip interleaved PFC reference design rated up to 350W, uninterruptible power supplies (UPS), and multi-loop digital switch-mode power supplies for servers and industrial systems.
Design consideration: because the QFN-S 6x6 package places its ground return in the exposed thermal pad, PCB design must ensure adequate via stitching under the pad for both thermal relief and low-inductance analog ground.
This page synthesizes distributor availability, drop-in alternatives, applications, and design notes not found in the manufacturer datasheet summary.
کے لیے ڈراپ اِن متبادل DSPIC33FJ09GS302-E/MM — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں DSPIC33FJ09GS302-E/MM (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Core Architecture, Operating Temperature, Peripherals, Program Memory (Flash).
DSPIC33FJ09GS302-I/MM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DSPIC33FJ06GS202A-E/MM
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DSPIC33FJ06GS202A-I/MM
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DSPIC33FJ16GS302-E/MM
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DSPIC33FJ32GS302-E/MM
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DSPIC33FJ09GS302-E/MM زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | 16-bit dsPIC33F DSC with DSP engine |
| Maximum Execution Speed | 40 MIPS |
| Program Memory (Flash) | 9 KB (3K x 24 instructions) |
| Data SRAM | 1024 Bytes |
| Supply Voltage Range | 3.0 V to 3.6 V |
| آپریٹنگ درجہ حرارت | -40C to +125C (E suffix) |
| پیکیج | 28-QFN-S, 6x6 mm |
| ماؤنٹنگ ٹائپ | Surface Mount |
| High-Speed PWM | Yes (SMPS-optimized) |
| ADC | Yes (SMPS-optimized) |
| Comparators | Yes (SMPS-optimized) |
| Target Applications | SMPS, digital power conversion |
| Technology | CMOS |
| پن کی تعداد | 28 |
| Country of Origin | Thailand |
DSPIC33FJ09GS302-E/MM 28-qfn-s, 6x6 mm پن کنفیگریشن گائیڈ
DSPIC33FJ09GS302-E/MM (28-qfn-s, 6x6 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں DSPIC33FJ09GS302-E/MM.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
DSPIC33FJ09GS302-E/MM کے لیے موزوں ہے 6 ایپلیکیشنs: Digital Switch-Mode Power Supplies (SMPS), Interleaved Power Factor Correction (PFC), AC-to-DC and DC-to-DC Converters, Uninterruptible Power Supplies (UPS), Server and Telecom Power Supplies, Industrial Automation and Lighting Power.
Digital Switch-Mode Power Supplies (SMPS)
The DSPIC33FJ09GS302-E/MM was architected specifically for multi-loop digital switch-mode power supplies. Its high-speed PWM module generates switching waveforms with hardware dead-time insertion and fault tripping, while the on-chip ADC samples feedback signals synchronously with the PWM period - a coupling that general-purpose MCUs cannot match. Control laws such as average current mode run in the 16-bit DSP core with single-cycle MAC instructions at up to 40 MIPS, giving loop bandwidths comparable to dedicated analog controllers. Placed as the sole controller on a 3.3V rail, it replaces multiple analog ICs; the trade-off is firmware development effort versus fixed-function controller simplicity.
تجویز کردہ
Interleaved Power Factor Correction (PFC)
Microchip's Interleaved PFC reference design demonstrates this controller handling universal AC input and producing a single high-voltage DC output up to 350W of power. Interleaving splits the PFC stage into parallel phases switched with programmed phase offset from the high-speed PWM module, reducing input ripple current and output capacitor stress. The ADC samples input current and bus voltage each switching cycle, and the 40 MIPS DSP core executes the compensation loop, while comparators enforce cycle-by-cycle current limiting in hardware with no software latency. The extended -40C to +125C rating suits enclosed AC-DC power supplies in industrial environments.
تجویز کردہ
AC-to-DC and DC-to-DC Converters
For both AC-to-DC front ends and isolated DC-to-DC stages, the GS-series controller provides closed-loop regulation of voltage and current entirely in firmware. The 9 KB Flash accommodates start-up sequencing, soft-start ramps, burst mode, and protection state machines, and the 1 KB SRAM holds control-loop state variables. Digital implementation allows gain scheduling across load ranges - something analog compensation networks cannot do - improving transient response from no-load to full load. The 3.0V to 3.6V supply range lets the controller share the housekeeping 3.3V rail, and the 28-pin QFN-S 6x6 mm footprint keeps controller board area minimal in dense power designs.
تجویز کردہ
Uninterruptible Power Supplies (UPS)
UPS designs require simultaneous management of battery charging, inverter output regulation, and transfer switching - all tasks the DSPIC33FJ09GS302-E/MM can consolidate in one 40 MIPS 16-bit core. The high-speed PWM drives the inverter bridge with SPWM or space-vector waveforms, the ADC tracks battery voltage, current, and AC output, and comparator-based hardware protection disconnects the bridge within microseconds during fault events, faster than any interrupt-driven scheme. The extended -40C to +125C temperature grade supports UPS units installed in unconditioned telecom and industrial sites. A companion watchdog via the on-chip supervisor maintains fail-safe operation in this safety-relevant application.
تجویز کردہ
Server and Telecom Power Supplies
High-density server and telecom rectifiers demand digital control for PMBus telemetry, phase management, and efficiency optimization across load ranges. The GS-series device's DSP core executes control loops while spare bandwidth handles housekeeping and communication, and its extended temperature rating tolerates the elevated internal air temperatures of fanless or restricted-airflow server shelves. The 28-pin QFN-S 6x6 mm package with exposed ground pad provides low-inductance grounding for the switching-adjacent analog peripherals, critical for ADC accuracy in high di/dt environments. Designers typically pair the controller with gate drivers rather than driving power MOSFETs directly, since the 3.3V logic outputs are intended for logic-level interfaces.
تجویز کردہ
Industrial Automation and Lighting Power
Beyond classic SMPS, the GS-series controller fits industrial LED drivers, HID ballast replacements, and battery-powered automation nodes where programmable power conversion adds product differentiation. Firmware-based control allows one hardware platform to serve multiple wattages and topologies - flyback, buck, boost, or LLC - by reprogramming the same 28-pin QFN-S PCB, simplifying inventory for contract manufacturers. The -40C to +125C extended range covers factory-floor ambient extremes and sealed enclosures. Because the ADC and comparators are on-chip, external analog compensation and protection circuits are eliminated, cutting BOM cost per node while the 40 MIPS core leaves headroom for product-specific features such as dimming curves and fault logging.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا DSPIC33FJ09GS302-E/MM — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | DSPIC33FJ09GS302-I/MM | DSPIC33FJ06GS202A-E/MM | DSPIC33FJ16GS302-E/MM | DSPIC33FJ32GS302-E/MM |
|---|---|---|---|---|---|
| Package | 28-QFN-S (6x6 mm) | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / MIPS | 16-bit, 40 MIPS | 16-bit, 40 MIPS | 16-bit, 40 MIPS | 16-bit, 40 MIPS | 16-bit, 40 MIPS |
| Flash Program Memory | 9 KB (3K x 24) | 9 KB (3K x 24) | 6 KB | 16 KB | 32 KB |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Temperature Range | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) |
| SMPS Peripherals | High-speed PWM + ADC + Comparators | High-speed PWM + ADC + Comparators | High-speed PWM + ADC + Comparators | High-speed PWM + ADC + Comparators | High-speed PWM + ADC + Comparators |
اہم امتیازی خصوصیات
- Extended +125C temperature rating at standard industrial cost position (بمقابلہDSPIC33FJ09GS302-I/MM)
- Purpose-built SMPS peripheral set versus general-purpose family siblings (بمقابلہDSPIC33EP64MC502-E/MM)
- Firmware-size headroom trade-off within the same footprint (بمقابلہDSPIC33FJ16GS302-E/MM)
ڈیزائن نوٹس
The 28-QFN-S 6x6 mm package uses a center exposed pad for ground. Connect this pad directly to the analog/digital ground plane with an array of at least 3x3 via stitching under the pad. This provides both the primary thermal path (important for a +125C-rated part dissipating controller power) and a low-inductance ground reference for the ADC and comparators sampling switching-node waveforms. Isolate the ground under the controller from high-current power grounds using a single-point star connection to prevent switching currents from corrupting ADC readings.
Supply the controller from a clean 3.3V rail within the specified 3.0V to 3.6V range. Decouple every VDD pin with 0.1uF ceramic capacitors placed within 2 mm of the pin, plus a 4.7uF to 10uF bulk capacitor. In SMPS applications the controller shares the PCB with large di/dt switching loops; a ferrite bead plus local regulation is recommended if the only available rail carries switching ripple. Never let the rail exceed 3.6V, including during transients - the absolute maximum for dsPIC33F devices will be exceeded and the die damaged.
GS-series I/O is heavily multiplexed: PWM, ADC, comparator, and communication functions share physical pins and must be assigned via peripheral configuration at startup. Verify the complete pin assignment table in the DS-75018B data sheet before routing, because assuming generic MCU pin maps will produce hardware errors. Also note the analog comparators provide cycle-by-cycle PWM fault tripping in hardware - do not implement overcurrent protection solely in software interrupt routines, as ISR latency at 40 MIPS cannot guarantee the response time required at SMPS switching frequencies.
تعمیل کی معلومات
Part is active/in production per Microchip. Specific RoHS/REACH/lead-free declarations for this exact ordering code were not present in the verified data; obtain material declarations from Microchip's product page or distributor compliance portals.
