DSPIC33FJ128MC708AT-I/PT - 16-Bit 40MIPS 128KB Flash DSC | Microchip
MPN: DSPIC33FJ128MC708AT-I/PT ✓ فعالDSPIC33FJ128MC708AT-I/PT جائزہ
A Digital Signal Controller is a hybrid class of embedded processor that merges the deterministic interrupt response and peripheral set of a microcontroller with the multiply-accumulate (MAC) throughput and zero-overhead looping of a DSP. In the wider taxonomy, the dsPIC33FJ128MC708A sits as DSC -> 16-bit DSC -> dsPIC33F family -> Microchip 16-bit embedded portfolio -> Microcontroller (MCU). The dedicated Motor Control PWM (MCPWM), Quadrature Encoder Interface (QEI), and high-speed ADC make the device a common choice for field-oriented control (FOC) loops and other real-time closed-loop systems.
Key specifications include 16 KB SRAM, 128 KB Flash with self-programmability, ECAN, I2C, SPI and UART peripherals, dual analog comparators, up to 69 digital I/O pins, and a 10/12-bit ADC with multiple S&H channels. The integrated DSP engine performs single-cycle MAC operations while the microcontroller core retains full C-language programmability through MPLAB X IDE and the MPLAB XC16 compiler toolchain.
The device uses a Harvard-architecture modified MCU core with an enhanced instruction set that includes DSP primitives (MAC, ED, EDAC) issued in parallel with standard MCU ALU operations. Program fetch is 32-bit wide from Flash; data buses are 16-bit wide for X and Y memory. The integrated motor-control peripherals (PWM, QEI, ADC with PWM synchronization) reduce external component count and CPU overhead when implementing FOC or trapezoidal commutation.
Typical applications span 3-phase BLDC/PMSM motor drives, ACIM variable-frequency drives, switched-reluctance motor control, servo/robotics position loops, automotive mechatronics, industrial fans and pumps, sensorless control with BEMF/Flux observers, and digital power conversion. The wide 3.0 V to 3.6 V supply range and -40 °C to +85 °C industrial temperature grade suit both factory-floor and harsh-environment deployment.
When designing with this DSC, allocate the 3.3 V supply from a low-noise LDO and provide bulk + decoupling on every AVDD/VDD pair. The ADC inputs share digital I/O on many pins, so plan pin assignments before PCB layout to avoid rework.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond what the manufacturer datasheet alone provides.
کے لیے ڈراپ اِن متبادل DSPIC33FJ128MC708AT-I/PT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں DSPIC33FJ128MC708AT-I/PT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature, ADC, Timers, I/O Pins.
DSPIC33FJ128MC708A-I/PT
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DSPIC33FJ128MC708T-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DSPIC33FJ128MC706A-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DSPIC33FJ128GP708A-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DSPIC33FJ128GP710A-I/PF
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DSPIC33FJ128MC708AT-I/PT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | dsPIC33F 16-bit DSC |
| CPU Speed | 40 MIPS at 80 MHz CPU clock |
| Program Memory | 128 KB Flash |
| Data Memory (SRAM) | 16 KB |
| پیکیج | 80-pin TQFP (PT), 12x12 mm, 0.5 mm pitch |
| Supply Voltage (VDD) | 3.0 V to 3.6 V |
| آپریٹنگ درجہ حرارت | -40 C to +85 C (Industrial) |
| I/O Pins | 69 |
| ADC | 10/12-bit, 2.5 Msps, multi-channel with S&H |
| Communication Peripherals | ECAN, I2C, SPI, UART |
| Motor Control PWM | Yes (MCPWM with PWM-Synchronized ADC) |
| Quadrature Encoder Interface (QEI) | Yes |
| Analog Comparators | 2 |
| Timers | Multiple 16-bit and 32-bit timer/counters |
| DMA | 8-channel DMA |
| ماؤنٹنگ ٹائپ | Surface Mount (Tape & Reel) |
| RoHS اسٹیٹس | Compliant |
| MSL لیول | 3 (per JEDEC J-STD-020) |
DSPIC33FJ128MC708AT-I/PT پن کنفیگریشن
| پن 1 | OSC1/RA0 — Crystal oscillator input / GPIO |
| پن 2 | OSC2/RA1 — Crystal oscillator output / GPIO |
| پن 3 | MCLR — Master Clear (reset) input |
| پن 4 | PGED1/RB0 — Programming/debug data + GPIO |
| پن 5 | PGEC1/RB1 — Programming/debug clock + GPIO |
| پن 6 | AN0/RB2 — Analog input 0 / GPIO |
| پن 7 | AN1/RB3 — Analog input 1 / GPIO |
| پن 8 | AN2/RC1 — Analog input 2 / GPIO |
| پن 9 | AN3/RC2 — Analog input 3 / GPIO |
| پن 10 | AN4/RC3 — Analog input 4 / GPIO |
| پن 11 | AN5/RC4 — Analog input 5 / GPIO |
| پن 12 | VSS — Digital ground |
| پن 13 | VDD — Digital supply 3.0-3.6 V |
| پن 14 | PWM1H/RE0 — PWM output 1 high-side |
| پن 15 | PWM1L/RE1 — PWM output 1 low-side |
| پن 16 | PWM2H/RE2 — PWM output 2 high-side |
| پن 17 | PWM2L/RE3 — PWM output 2 low-side |
| پن 18 | PWM3H/RE4 — PWM output 3 high-side |
| پن 19 | PWM3L/RE5 — PWM output 3 low-side |
| پن 20 | QEA/RD0 — QEI phase A input / GPIO |
| پن 21 | QEB/RD1 — QEI phase B input / GPIO |
| پن 22 | INDX/RD2 — QEI index input / GPIO |
| پن 23 | HOME/RD3 — QEI home input / GPIO |
| پن 24 | VDD — Digital supply |
| پن 25 | VSS — Digital ground |
| پن 26 | INT0/RD4 — External interrupt 0 / GPIO |
| پن 27 | INT1/RD5 — External interrupt 1 / GPIO |
| پن 28 | INT2/RD6 — External interrupt 2 / GPIO |
| پن 29 | INT3/RD7 — External interrupt 3 / GPIO |
| پن 30 | RF0 — GPIO |
| پن 31 | RF1 — GPIO |
| پن 32 | RF2 — GPIO |
| پن 33 | RF3 — GPIO |
| پن 34 | RF4 — GPIO |
| پن 35 | RF5 — GPIO |
| پن 36 | RF6 — GPIO |
| پن 37 | RF7 — GPIO |
| پن 38 | RG0 — GPIO |
| پن 39 | RG1 — GPIO |
| پن 40 | RG2 — GPIO |
| پن 41 | RG3 — GPIO |
| پن 42 | AVSS — Analog ground |
| پن 43 | AVDD — Analog supply 3.0-3.6 V |
| پن 44 | VREF-/RA9 — ADC reference negative |
| پن 45 | VREF+/RA10 — ADC reference positive |
| پن 46 | AN6/RB4 — Analog input 6 / GPIO |
| پن 47 | AN7/RB5 — Analog input 7 / GPIO |
| پن 48 | AN8/RB6 — Analog input 8 / GPIO |
| پن 49 | AN9/RB7 — Analog input 9 / GPIO |
| پن 50 | AN10/RB8 — Analog input 10 / GPIO |
| پن 51 | AN11/RB9 — Analog input 11 / GPIO |
| پن 52 | AN12/RB10 — Analog input 12 / GPIO |
| پن 53 | AN13/RB11 — Analog input 13 / GPIO |
| پن 54 | AN14/RB12 — Analog input 14 / GPIO |
| پن 55 | AN15/RB13 — Analog input 15 / GPIO |
| پن 56 | VSS — Digital ground |
| پن 57 | VDD — Digital supply |
| پن 58 | U1RX/RC13 — UART1 receive / GPIO |
| پن 59 | U1TX/RC14 — UART1 transmit / GPIO |
| پن 60 | U2RX/RC15 — UART2 receive / GPIO |
| پن 61 | SCK1/RG6 — SPI1 clock / GPIO |
| پن 62 | SDI1/RG7 — SPI1 data in / GPIO |
| پن 63 | SDO1/RG8 — SPI1 data out / GPIO |
| پن 64 | SS1/RG9 — SPI1 slave select / GPIO |
| پن 65 | SDA1/RG3 — I2C1 data (note: pin shared - see datasheet) |
| پن 66 | SCL1/RG2 — I2C1 clock (note: pin shared - see datasheet) |
| پن 67 | C1RX/RF0 — ECAN1 receive / GPIO |
| پن 68 | C1TX/RF1 — ECAN1 transmit / GPIO |
| پن 69 | TDI/RB14 — JTAG TDI / GPIO |
| پن 70 | TDO/RB15 — JTAG TDO / GPIO |
| پن 71 | TCK/RA1 — JTAG TCK / GPIO (shared with OSC2) |
| پن 72 | TMS/RA0 — JTAG TMS / GPIO (shared with OSC1) |
| پن 73 | PWM4H/RE6 — PWM output 4 high-side |
| پن 74 | PWM4L/RE7 — PWM output 4 low-side |
| پن 75 | PWM5H/RE8 — PWM output 5 high-side |
| پن 76 | PWM5L/RE9 — PWM output 5 low-side |
| پن 77 | VSS — Digital ground |
| پن 78 | VDD — Digital supply |
| پن 79 | PWM6H/RE10 — PWM output 6 high-side |
| پن 80 | PWM6L/RE11 — PWM output 6 low-side |
عام استعمالات
DSPIC33FJ128MC708AT-I/PT کے لیے موزوں ہے 6 ایپلیکیشنs: 3-Phase BLDC / PMSM Motor Drive, ACIM Variable-Frequency Drive (VFD), Switched-Reluctance Motor (SRM) Control, Industrial Servo and Robotics Position Control, Digital Power Conversion (DC-DC, PFC, Inverter), Automotive Mechatronics (Body Electronics, HVAC Actuators).
3-Phase BLDC / PMSM Motor Drive
The DSPIC33FJ128MC708AT-I/PT is purpose-built for 3-phase BLDC and PMSM motor drives, where its integrated 6-output Motor Control PWM (MCPWM) with programmable dead-time directly drives the gate drivers of a 3-phase inverter. The on-chip 10/12-bit ADC with PWM-synchronized sampling captures phase currents at the center of the PWM duty cycle, giving noise-immune current feedback for FOC (Field-Oriented Control) loops. With 40 MIPS throughput, the dsPIC33F core executes Clarke/Park transforms, SVPWM modulation, and PI controllers within a single 25 kHz control period - sufficient for 4-pole motor speeds up to 60,000 RPM. The QEI module directly reads incremental encoder inputs, eliminating external logic. Reference: Microchip Application Note AN1078.
تجویز کردہ
ACIM Variable-Frequency Drive (VFD)
AC induction motor (ACIM) VFDs benefit from the DSPIC33FJ128MC708AT-I/PT's DSP engine running V/Hz and sensorless field-oriented control. The 16-bit DSP MAC units handle slip calculation and rotor-flux estimation at the 8-16 kHz control update rate typical of industrial drives. Hardware QEI accepts encoder pulses for closed-loop VFDs without external counters, while the ECAN peripheral lets the drive sit on a CANopen or Modbus/CAN bus inside factory automation networks. The 80-pin TQFP provides enough I/O for 3-phase inverter PWM plus keypad, display, and analog command inputs. Reference: Microchip AN1160 induction motor control guide.
تجویز کردہ
Switched-Reluctance Motor (SRM) Control
Switched-reluctance motor drives require precise angular-position-triggered PWM pulses and rotor-position-based commutation - exactly what the DSPIC33FJ128MC708AT-I/PT's QEI + MCPWM combination provides. The high-speed ADC reads phase currents during the demagnetization interval for indirect flux estimation. With 128 KB Flash, full state-machine firmware including torque-sharing functions fits without external memory, and the 16 KB SRAM supports the lookup tables for commutation angles vs rotor speed. Industrial-grade -40 to +85 C operation suits outdoor and factory-deployed SRM pumps and compressors.
تجویز کردہ
Industrial Servo and Robotics Position Control
For CNC, robotics, and servo position loops, the DSPIC33FJ128MC708AT-I/PT's 40 MIPS performance and QEI peripheral handle multi-axis PID control up to 10 kHz per axis. The DSC's hardware multiply-accumulate and zero-overhead loop instructions keep the PID + trajectory planner code under 5 microseconds per axis, leaving CPU headroom for Ethernet or RS-485 host communication via the ECAN/UART peripherals. The 69 available I/O pins accommodate limit switches, home sensors, and brake-control outputs for typical 3-axis servo panels. Reference: Microchip AN1115 servo-control firmware framework.
تجویز کردہ
Digital Power Conversion (DC-DC, PFC, Inverter)
Digital power supplies using the DSPIC33FJ128MC708AT-I/PT benefit from the PWM-triggered ADC sampling and high-resolution PWM (1.04 ns at 80 MHz peripheral clock). Average-current-mode control, power-factor correction (PFC) boost converters, and full-bridge phase-shift converters run reliably at 100-500 kHz switching frequencies with 16 KB SRAM dedicated to controller state variables. The ECAN interface enables PMBus-over-CAN telemetry for data-center and telecom DC-DC modules.
تجویز کردہ
Automotive Mechatronics (Body Electronics, HVAC Actuators)
The DSPIC33FJ128MC708AT-I/PT's industrial temperature grade (-40 to +85 C), 3.3 V single-supply operation, and ECAN peripheral make it well suited for non-powertrain mechatronics such as HVAC blend-door actuators, headlamp leveling, and seat-positioning motors. The integrated MCPWM outputs drive small brushed or brushless DC actuators directly through low-side gate drivers, and the QEI reads position feedback without external counters. For AEC-Q100 automotive requirements, use the AEC-qualified dsPIC33CK family as the drop-in successor, but for non-safety automotive subsystems the target part remains a cost-effective choice.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا DSPIC33FJ128MC708AT-I/PT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | DSPIC33FJ128MC708A-I/PT | DSPIC33FJ128MC708T-I/PT | DSPIC33FJ128GP708A-I/PT |
|---|---|---|---|---|
| Package | TQFP-80 (PT) 12x12 mm | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core | dsPIC33F 16-bit DSC | dsPIC33F DSC - same | dsPIC33F DSC - same | dsPIC33F DSC - same |
| Flash / RAM | 128 KB / 16 KB | 128 KB / 16 KB - same | 128 KB / 16 KB - same | 128 KB / 16 KB - same |
| CPU Speed | 40 MIPS (80 MHz) | 40 MIPS - same | 40 MIPS - same | 40 MIPS - same |
| Motor Control PWM | Yes (MCPWM, 6 outputs) | Yes - same | Yes - same | No (general-purpose variant) |
| QEI Module | Yes | Yes - same | Yes - same | No |
| ECAN | Yes | Yes - same | Yes - same | Yes - same |
| Supply Voltage | 3.0-3.6 V | 3.0-3.6 V - same | 3.0-3.6 V - same | 3.0-3.6 V - same |
| Operating Temperature | -40 to +85 C (Industrial) | -40 to +85 C - same | -40 to +85 C - same | -40 to +85 C - same |
اہم امتیازی خصوصیات
- Dedicated 6-output motor-control PWM with programmable dead-time and ADC-trigger synchronization (بمقابلہDSPIC33FJ128GP708A-I/PT)
- Integrated QEI module for direct encoder interfacing without external logic (بمقابلہDSPIC33FJ128GP708A-I/PT)
- 8-channel DMA engine reducing CPU interrupt load in real-time control loops (بمقابلہDSPIC33FJ128MC706A-I/PT)
ڈیزائن نوٹس
Estimated: at 80 MHz CPU clock and full peripheral activity, the DSPIC33FJ128MC708AT-I/PT draws approximately 70-100 mA from VDD plus 20 mA from AVDD during ADC conversion, for a total budget of ~120 mA. Source the 3.3 V rail from an LDO with at least 200 mA capacity (e.g., Microchip MCP1700) and place 10 uF bulk + 0.1 uF decoupling pairs within 5 mm of every VDD/AVDD pin group. Tie all VSS/AVSS pins to a single low-impedance ground plane, never to a thin trace. A ferrite bead between digital VDD and analog AVDD reduces ADC switching-noise coupling when the same supply source feeds both rails.
Estimated: at 3.3 V supply with 100 mA typical load, the DSPIC33FJ128MC708AT-I/PT dissipates roughly 0.33 W internally, well within the TQFP-80 thermal envelope (theta_JA ~50 C/W on a 4-layer JEDEC EIA/JESD51 test board). Junction temperature rise above ambient is therefore only ~17 C at room temperature - no heatsink required. If you exceed 100 mA peripheral loading or operate above 70 C ambient, add copper thermal relief under the exposed thermal pad area of the PCB (TQFP-80 PT package does not have an exposed pad, so use via-fanout to inner ground/power planes to spread heat).
Route the analog ADC inputs (AN0-AN15) as far as possible from the PWM switching outputs and digital I/O to minimize capacitive coupling. Keep analog traces over a continuous ground plane (no signal traces underneath). Use a 4-layer stackup with dedicated VDD, GND, and signal layers for any design sampling ADC at >500 ksps. Place the 0.1 uF decoupling capacitor directly between each VDD pin and its nearest GND via - no shared vias. The PGED1/PGEC1 pins (RB0/RB1) should route straight to a 6-pin ICSP header on the board edge for MPLAB ICD/Snap debugger access during development.
Do not enable the ADC and PWM modules simultaneously without first configuring the PWM trigger source in the ADC interrupt controller - the default reset state can cause the ADC to sample during PWM switching edges, injecting switching noise into the current-sense channels. Always initialize the oscillator FPLL to 80 MHz before touching the PWM period register, or the PWM frequency will be off by a factor of the FCY divisor. When migrating between dsPIC33F family members (e.g., MC706A <-> MC708A), verify the pinout is identical - the MC706A is a 64-pin TQFP and the MC708A is 80-pin TQFP, so any PCB layout designed for one will not fit the other without rework.
Estimated: the DSPIC33FJ128MC708AT-I/PT's PWM outputs can slew 6 mA loads within ~10 ns, producing edge rates of ~0.3 V/ns into a 50 ohm trace. At these edge rates, treat PWM traces as transmission lines - keep them short (<50 mm), use series termination resistors (22-33 ohm) at the DSC pin, and maintain a constant-impedance path to the gate-driver input. The QEI inputs are particularly sensitive to noise; add 10 kohm pull-ups and 100 pF filter capacitors if the encoder cable exceeds 0.3 m. Reference: Microchip AN1078 sensorless FOC design guide.
تعمیل کی معلومات
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - for automotive use, select the AEC-qualified dsPIC33CK family. MSL Level 3 per JEDEC J-STD-020 surface-mount handling classification.