Silicon Labs

EFM32G280F64-QFP100 - 32MHz Cortex-M3 MCU | Silicon Labs

MPN: EFM32G280F64-QFP100 ✓ فعال
3 V Vdss 100-LQFP (14 x 14 mm) Package 32 MHz Speed 64 kB Memory
MOQ: 1 |

EFM32G280F64-QFP100 جائزہ

The Silicon Labs EFM32G280F64-QFP100 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 64 kB of flash memory, 16 kB of RAM, and 86 digital I/O pins in a 100-LQFP package. It also provides three 16-bit timers and operates from a 3 V supply, making it suitable for compact embedded systems requiring substantial I/O and low-power operation.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripheral interfaces, and I/O into one device. The EFM32G280F64-QFP100 belongs to the 32-bit embedded MCU hierarchy and uses the ARM Cortex-M3 architecture. It is designed for applications where local control, communication, sensing, and actuator control must be handled by a compact embedded platform.

The device combines a 32 MHz ARM Cortex-M3 processor with 64 kB of flash and 16 kB of RAM. Its 86 digital I/O pins provide broad connectivity for sensors, displays, communications, and control signals. Three 16-bit timers support periodic timing, pulse measurement, and timing-intensive control functions. The listed AES capability adds hardware support for applications requiring encrypted data handling.

Silicon Labs describes the Gecko platform around low-energy techniques, fast wake-up behavior, and energy-saving operating modes. These characteristics are particularly useful in battery-powered or intermittently powered equipment. The external oscillator configuration listed for this family supports designs where precise timing derives from an external clock source rather than an internal oscillator alone.

Typical uses include industrial monitoring, energy-sensitive sensor nodes, building automation, connected equipment, and compact embedded controllers. The high pin count can reduce the need for I/O expanders in designs that connect multiple discrete sensors, status indicators, communications lines, and actuator outputs to one controller.

PCB implementation requires attention to the 100-LQFP footprint, power routing, decoupling, clock stability, programming access, and exposed peripheral limits. Place the required decoupling capacitors close to the supply pins, route high-current returns through a stable ground plane, and follow the manufacturer's pin-description table when assigning tracks. Confirm boot, programming, and reset behavior in hardware before releasing the layout.

This product page consolidates the core specifications, practical use cases, package information, and sourcing options for the EFM32G280F64-QFP100. It also provides a structured comparison with closely related Silicon Labs EFM32 devices to help engineers distinguish ordering codes, memory capacity, and peripheral differences without overlooking PCB compatibility.

کے لیے ڈراپ اِن متبادل EFM32G280F64-QFP100 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

EFM32G280F64-QFP100T

✅ ڈراپ-اِن
📦 100-LQFP (14 x 14 mm)
Same 32 MHz Cortex-M3 core, 64 kB flash, and 16 kB RAM; T suffix differs by ordering or packing code, so verify temperature grade and orientation.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

EFM32G280F64G-E-QFP100

✅ ڈراپ-اِن
📦 100-LQFP (14 x 14 mm)
Same stated 32 MHz Cortex-M3 core, 64 kB flash, 16 kB RAM, and 100-LQFP format; G-E suffix may change grade or packing details.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

EFM32G280F64-QFP100 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit ARM Cortex-M3 microcontroller
Manufacturer Silicon Labs
Maximum CPU Frequency 32 MHz
Processor Core ARM Cortex-M3
Flash Memory 64 kB
Flash Organization 64K x 8
RAM 16 kB
RAM Organization 16K x 8
Digital I/O Pins 86 pins
Timer Count 3
Timer Resolution 16-bit
سپلائی وولٹیج 3 V
Oscillator Type External
پیکیج 100-LQFP (14 x 14 mm)
ماؤنٹنگ ٹائپ Surface mount
Security Feature AES
Low-Power Features Fast wake-up and energy-saving modes
Memory Protection Unit Supported

EFM32G280F64-QFP100 100-lqfp (14 x 14 mm) پن کنفیگریشن گائیڈ

EFM32G280F64-QFP100 (100-lqfp (14 x 14 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

EFM32G280F64-QFP100 کے لیے 100-lqfp (14 x 14 mm) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EFM32G280F64-QFP100.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

EFM32G280F64-QFP100 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor and Control Hub, Battery-Powered Sensor Node, Building Automation Controller, Connected Monitoring Equipment, Energy-Smart Metering System, Compact Embedded Control Board.

🏭

Industrial Sensor and Control Hub

The EFM32G280F64-QFP100 fits an industrial control hub that combines several sensor inputs with local actuator control. Its 86 digital I/O pins provide substantial discrete connectivity, while the 32 MHz ARM Cortex-M3 core can execute protocol handling, filtering, and supervisory logic. The 64 kB flash stores application firmware and the 16 kB RAM supports working buffers. Three 16-bit timers are useful for periodic sampling, pulse counting, and motor or timing control. Use an external oscillator when multiple nodes require synchronized timing, and design the 3 V supply with local decoupling close to the package pins.

🧩

Battery-Powered Sensor Node

The EFM32G280F64-QFP100 is suitable for a battery-powered sensor node because Silicon Labs identifies fast wake-up behavior and energy-saving modes as platform capabilities. The 32 MHz Cortex-M3 core provides enough performance to process measurements and prepare data between sleep intervals without requiring a higher-power processor. Its 64 kB flash can hold firmware and fixed parameters, while 16 kB RAM accommodates active acquisition and communication buffers. The 86 I/O pins permit multiple sensing and status connections in a compact assembly. Select capacitors and external components for the lowest achievable standby current, and measure wake-up energy across the complete operating sequence.

🏠

Building Automation Controller

The EFM32G280F64-QFP100 can serve as a building-automation controller for lighting, access, environmental monitoring, and motorized equipment. Its 86 digital I/O pins reduce the need for multiple external I/O expanders, while three 16-bit timers support scheduled operations, pulse metering, and timing-based control. The ARM Cortex-M3 core runs at up to 32 MHz, enabling local control without a network round trip. Its 64 kB flash and 16 kB RAM provide room for a control application, event logic, and communication buffers. Design around the external oscillator option, isolate sensitive signals from switching nodes, and use the manufacturer pin table to separate analog-capable pins from general-purpose I/O.

🌐

Connected Monitoring Equipment

The EFM32G280F64-QFP100 supports compact connected-monitoring equipment that must acquire local data and communicate it through a host interface. Its 32 MHz ARM Cortex-M3 core can manage sampling, protocol framing, data validation, and device-state logic, while 64 kB of flash holds firmware and 16 kB of RAM supports active message handling. The 86 digital I/O pins allow status and alarm lines to be integrated without a large external I/O subsystem. AES capability is relevant to designs requiring encrypted communication or stored-data protection. Keep radio and switching circuitry separated from sensitive pins, provide a stable 3 V rail, and verify the external clock requirements in the system timing plan.

⚡

Energy-Smart Metering System

The EFM32G280F64-QFP100 is appropriate for metering equipment that combines pulse or digital sensor inputs with a low-power embedded controller. The three 16-bit timers can capture frequency or pulse-duration information, while 86 digital I/O pins provide interfaces for sensors, alarm indicators, and control outputs. The 32 MHz Cortex-M3 core performs local calculations without sending every raw measurement to a remote host. Fast wake-up and energy-saving modes help minimize consumption during inactive periods, and the external oscillator option supports stable time measurement when the metering accuracy plan requires it. Validate timing accuracy, thermal behavior, and input thresholds across the full environmental range.

🔧

Compact Embedded Control Board

The EFM32G280F64-QFP100 can anchor a compact embedded control board requiring broad I/O in an LQFP package. Its 86 digital I/O pins make it suitable for LED and button interfaces, external memory buses, communications lines, and actuator drivers. A 32 MHz ARM Cortex-M3 core provides deterministic responsiveness for supervisory logic, while 64 kB of flash and 16 kB of RAM support embedded firmware without an external memory device. The three 16-bit timers offload periodic tasks and timing functions. Because a 100-LQFP footprint has dense routing requirements, place decoupling and support components before fine-pitch traces, maintain a continuous ground reference, and verify programming and boot signals in the first prototype.

تجویز کردہ پروڈکٹس کا خلاصہ

EFM32G280F64-QFP100T Same MCU configuration in a related ordering code استعمال ہوتا ہے: Industrial Sensor and Control Hub, Battery-Powered Sensor Node, Building Automation Controller, Connected Monitoring Equipment, Energy-Smart Metering System, Compact Embedded Control Board EFM32G280F64G-E-QFP100 Same Gecko MCU family in a related ordering code استعمال ہوتا ہے: Industrial Sensor and Control Hub, Battery-Powered Sensor Node, Building Automation Controller, Connected Monitoring Equipment, Energy-Smart Metering System, Compact Embedded Control Board
What is the EFM32G280F64-QFP100?
The EFM32G280F64-QFP100 is a Silicon Labs 32-bit microcontroller based on the ARM Cortex-M3 core. It operates up to 32 MHz and combines 64 kB of flash, 16 kB of RAM, 86 digital I/O pins, three 16-bit timers, and AES capability in a 100-LQFP package. According to the manufacturer product page, its low-energy platform, fast wake-up behavior, and energy-saving modes make it suitable for energy-sensitive embedded products.
What are the key specifications of EFM32G280F64-QFP100?
The EFM32G280F64-QFP100 combines a 32 MHz ARM Cortex-M3 processor, 64 kB of flash memory, 16 kB of RAM, 86 digital I/O pins, and three 16-bit timers. The 100-LQFP package is specified as 14 x 14 mm, and the device operates from 3 V. Silicon Labs also identifies AES and low-energy operating techniques, including fast wake-up and energy-saving modes, as important device characteristics.
How much memory does the EFM32G280F64-QFP100 have?
The EFM32G280F64-QFP100 contains 64 kB of flash memory organized as 64K x 8 and 16 kB of RAM organized as 16K x 8. According to the Silicon Labs specification listing, these resources accompany a 32 MHz ARM Cortex-M3 core and 86 digital I/O pins. The flash stores firmware, while RAM supports working data, stack space, and application state.
What is the operating voltage of EFM32G280F64-QFP100?
The EFM32G280F64-QFP100 operates at a nominal 3 V supply. According to the manufacturer product listing and technical specification, the device is an ARM Cortex-M3 microcontroller rated for operation up to 32 MHz. Exact minimum and maximum supply limits, tolerance, and power-supply sequencing requirements must be taken from the pin-description and electrical-characteristics tables in the manufacturer datasheet.
What package does the EFM32G280F64-QFP100 use?
The EFM32G280F64-QFP100 uses a 100-LQFP surface-mount package measuring 14 x 14 mm. The manufacturer specification identifies the package as 100-LQFP, while the product family provides 86 digital I/O pins. Use the package drawing and pin-description table in the manufacturer datasheet when creating the PCB footprint, because exposed-package details and recommended land patterns must be followed exactly.
Where can I download the EFM32G280F64-QFP100 datasheet?
The official EFM32G280F64-QFP100 technical documentation is available from the Silicon Labs product page linked on this page. That page provides the device specifications and access to manufacturer documentation. Use the EFM32G280 family reference manual for the detailed register map, interrupt behavior, memory map, and peripheral descriptions, and use the device datasheet for package dimensions and electrical limits.
Where can I find the EFM32G280F64-QFP100 pinout?
The EFM32G280F64-QFP100 pin assignment is defined in the pin-description table of the manufacturer datasheet. The device uses a 100-LQFP package and provides 86 digital I/O pins, but the remaining package positions are not all general-purpose I/O. Consult the exact table for power, ground, reset, clock, programming, and peripheral functions before assigning PCB tracks.
Is EFM32G280F64-QFP100 suitable for low-power embedded applications?
Yes, the EFM32G280F64-QFP100 is suitable for energy-sensitive applications because Silicon Labs identifies fast wake-up behavior and energy-saving modes as core platform features. Its 32 MHz ARM Cortex-M3 processor provides useful processing speed without requiring a high-power application processor. Actual standby current and wake-up time depend on the selected operating mode, clock configuration, and enabled peripherals, so compare those measurements in the datasheet.
What is the difference between EFM32G280F64-QFP100 and EFM32G280F64-QFP100T?
EFM32G280F64-QFP100T has the same stated core configuration as the EFM32G280F64-QFP100: an ARM Cortex-M3 processor at up to 32 MHz, 64 kB of flash, 16 kB of RAM, and a 100-LQFP package. The T suffix identifies a related ordering or packaging variant rather than a new processor architecture. Confirm temperature grade, packing orientation, and lifecycle status against the exact suffix in the manufacturer documentation before substitution.
What is the difference between EFM32G280F64-QFP100 and EFM32G280F64G-E-QFP100?
Both devices are listed as Silicon Labs ARM Cortex-M3 microcontrollers with 64 kB of flash, 16 kB of RAM, operation up to 32 MHz, and a 100-LQFP package. Their ordering codes indicate related member options within the EFM32G280 family. Before treating EFM32G280F64G-E-QFP100 as a substitute, verify the temperature range, lead or reel orientation, marking, and every pin function in the manufacturer documentation.
When should I choose EFM32G280F64-QFP100 over another EFM32G280 member?
Choose the EFM32G280F64-QFP100 when a design specifically requires a 32 MHz ARM Cortex-M3 controller with 64 kB of flash, 16 kB of RAM, 86 digital I/O pins, three 16-bit timers, and a 100-LQFP footprint. If a project needs more flash or RAM, fewer pins, a different package, or a different temperature grade, select the corresponding family member rather than assuming the F64-QFP100 can be substituted without layout review.
Can EFM32G280F64-QFP100 be replaced by EFM32G880F64-QFP100?
The EFM32G880F64-QFP100 is a related 64 kB-flash, 16 kB-RAM EFM32 configuration in the same QFP100 package family, but that package similarity alone does not prove pin-for-pin compatibility. The G880 and G280 devices can differ in peripheral sets and pin assignments. Treat this as a redesign candidate until every ball, pad, and peripheral function has been checked against both manufacturer datasheets.
What can replace the EFM32G280F64-QFP100 without changing the PCB?
The closest documented candidate is EFM32G280F64G-E-QFP100, which uses the same 100-LQFP format and retains the stated 32 MHz Cortex-M3 core, 64 kB flash, and 16 kB RAM. It should only be treated as a drop-in option after verifying temperature grade, package orientation, programming configuration, and all 100 pin assignments. No cross-manufacturer pin-compatible replacement has been established.
Where can I buy EFM32G280F64-QFP100 and check its price?
Use the Request a Quote form on this page to request the current price, stock position, and lead time for the EFM32G280F64-QFP100. Quote requests establish the commercial terms for the exact manufacturer part number and required packing option. The form is also the appropriate route for checking production quantities and delivery scheduling without relying on a stale market listing.
What is the lead time for EFM32G280F64-QFP100?
Current lead time and minimum order quantity for the EFM32G280F64-QFP100 should be requested through the Request a Quote form on this page. Lead time can vary with order volume, manufacturing condition, and the selected packing method. The manufacturer part number includes the 100-LQFP package configuration, so include any required tape-and-reel or other shipment details in the request.

کے لیے انجینئرنگ ریفرنس ڈیٹا EFM32G280F64-QFP100 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the EFM32G280F64-QFP100 when a board requires a 32 MHz ARM Cortex-M3 controller, 64 kB of flash, 16 kB of RAM, 86 digital I/O pins, and three 16-bit timers in a 100-LQFP footprint. Its low-energy platform, fast wake-up behavior, and AES capability make it particularly suitable for duty-cycled monitoring and compact embedded-control products. The EFM32G280F64-QFP100T is a close same-family ordering option when its specific suffix conditions meet the production requirements. Consider EFM32G280F64G-E-QFP100 when the G-E ordering code provides the required grade or packing arrangement, after confirming every pin and temperature specification. Do not select a same-package MCU solely by flash and RAM capacity: peripheral availability, pin multiplexing, clock architecture, software support, and exact package drawing must also match the design.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ EFM32G280F64-QFP100T EFM32G280F64G-E-QFP100
Package 100-LQFP (14 x 14 mm) 100-LQFP (14 x 14 mm) 100-LQFP (14 x 14 mm)
Brand Silicon Labs Silicon Labs Silicon Labs
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz
Flash Memory 64 kB 64 kB 64 kB
RAM 16 kB 16 kB 16 kB
Ordering-Code Difference Base F64-QFP100 ordering code T suffix added G-E suffix added

اہم امتیازی خصوصیات

  • Broad digital I/O in a 100-LQFP package (بمقابلہEFM32G280F64-QFP100T)
  • Three dedicated 16-bit timers for embedded timing functions (بمقابلہEFM32G280F64G-E-QFP100)
  • Low-power Gecko platform with fast wake-up behavior (بمقابلہEFM32G880F64-QFP100)

ڈیزائن نوٹس

Treat the 100-LQFP footprint as a dense routing task. Assign power, ground, clock, reset, programming, and communication pins from the manufacturer pin-description table before laying out signal traces. Place required decoupling capacitors directly beside the corresponding supply pins and use a continuous ground plane beneath the device where layout rules permit. Check pad dimensions, pin-one orientation, solder-mask clearance, and paste volume against the manufacturer package drawing.

Design the 3 V supply path for both normal processing and transient current from enabled peripherals. Keep the MCU branch short, provide local high-frequency decoupling, and avoid sharing narrow traces between the controller and switching or radio loads. If the board enters a low-energy state, confirm that every external rail and pull network returns to a defined level without violating the device's electrical limits.

Do not infer pin compatibility from the package outline alone. Although the listed alternatives use the same 100-LQFP format, verify the exact pin table, temperature grade, clock options, programming interface, and packing orientation. Likewise, 86 digital I/O pins do not mean every package position is a general-purpose GPIO. Use the manufacturer pin names when assigning board functions and avoid reserving power or special-function pads as ordinary signals.

Keep the external oscillator path and sensitive digital inputs away from switching nodes and high-current return paths. Route clock signals over a continuous reference plane, minimize stub branches, and use the shortest practical oscillator connection. For designs using the three 16-bit timers for precision measurement, validate jitter, input thresholds, and timer accuracy on assembled hardware because trace coupling and clock quality can affect the usable measurement margin.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The EFM32G280F64-QFP100 is a general-purpose microcontroller rather than an automotive-qualified device. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed for the selected ordering and packing code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

EFM32G280F64-QFP100 EFM32G280F64-QFP100 datasheet EFM32G280F64-QFP100 datasheet pdf EFM32G280F64-QFP100 pinout EFM32G280F64-QFP100 specifications EFM32G280F64-QFP100 equivalent EFM32G280F64-QFP100 replacement EFM32G280F64-QFP100 cross reference EFM32G280F64-QFP100 vs EFM32G880F64-QFP100 EFM32G280F64-QFP100 footprint Silicon Labs EFM32G280F64-QFP100 EFM32G280F64-QFP100 price EFM32G280F64-QFP100 stock EFM32G280F64 QFP100 pinout EFM32G280F64 low power application

متعلقہ اجزاء اور اصطلاحات

Silicon Labs EFM32G280F64-QFP100 EFM32G280F64-QFP100T EFM32G280F64G-E-QFP100 EFM32G880F64-QFP100 EFM32 Gecko ARM Cortex-M3 32-bit microcontroller embedded MCU microcontroller semiconductor 64 kB flash memory 16 kB RAM 86 digital I/O pins 16-bit timer fast wake-up energy-saving mode AES external oscillator Memory Protection Unit 100-LQFP LQFP package family surface-mount package SMD 3 V power supply industrial control sensor node
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں