EFM32G280F64-QFP100 - 32MHz Cortex-M3 MCU | Silicon Labs
料号: EFM32G280F64-QFP100 ✓ 量产中EFM32G280F64-QFP100 概述
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripheral interfaces, and I/O into one device. The EFM32G280F64-QFP100 belongs to the 32-bit embedded MCU hierarchy and uses the ARM Cortex-M3 architecture. It is designed for applications where local control, communication, sensing, and actuator control must be handled by a compact embedded platform.
The device combines a 32 MHz ARM Cortex-M3 processor with 64 kB of flash and 16 kB of RAM. Its 86 digital I/O pins provide broad connectivity for sensors, displays, communications, and control signals. Three 16-bit timers support periodic timing, pulse measurement, and timing-intensive control functions. The listed AES capability adds hardware support for applications requiring encrypted data handling.
Silicon Labs describes the Gecko platform around low-energy techniques, fast wake-up behavior, and energy-saving operating modes. These characteristics are particularly useful in battery-powered or intermittently powered equipment. The external oscillator configuration listed for this family supports designs where precise timing derives from an external clock source rather than an internal oscillator alone.
Typical uses include industrial monitoring, energy-sensitive sensor nodes, building automation, connected equipment, and compact embedded controllers. The high pin count can reduce the need for I/O expanders in designs that connect multiple discrete sensors, status indicators, communications lines, and actuator outputs to one controller.
PCB implementation requires attention to the 100-LQFP footprint, power routing, decoupling, clock stability, programming access, and exposed peripheral limits. Place the required decoupling capacitors close to the supply pins, route high-current returns through a stable ground plane, and follow the manufacturer's pin-description table when assigning tracks. Confirm boot, programming, and reset behavior in hardware before releasing the layout.
This product page consolidates the core specifications, practical use cases, package information, and sourcing options for the EFM32G280F64-QFP100. It also provides a structured comparison with closely related Silicon Labs EFM32 devices to help engineers distinguish ordering codes, memory capacity, and peripheral differences without overlooking PCB compatibility.
直接替换替代料: EFM32G280F64-QFP100 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
EFM32G280F64-QFP100T
✅ 直接替换📋 参考替代料(不在目录中)
EFM32G280F64G-E-QFP100
✅ 直接替换📋 参考替代料(不在目录中)
EFM32G280F64-QFP100 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Manufacturer | Silicon Labs |
| Maximum CPU Frequency | 32 MHz |
| Processor Core | ARM Cortex-M3 |
| Flash Memory | 64 kB |
| Flash Organization | 64K x 8 |
| RAM | 16 kB |
| RAM Organization | 16K x 8 |
| Digital I/O Pins | 86 pins |
| Timer Count | 3 |
| Timer Resolution | 16-bit |
| 电源电压 | 3 V |
| Oscillator Type | External |
| 封装 | 100-LQFP (14 x 14 mm) |
| 安装类型 | Surface mount |
| Security Feature | AES |
| Low-Power Features | Fast wake-up and energy-saving modes |
| Memory Protection Unit | Supported |
EFM32G280F64-QFP100 100-lqfp (14 x 14 mm) 引脚配置指南
EFM32G280F64-QFP100(100-lqfp (14 x 14 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: EFM32G280F64-QFP100.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EFM32G280F64-QFP100 适用于 6 应用s: Industrial Sensor and Control Hub, Battery-Powered Sensor Node, Building Automation Controller, Connected Monitoring Equipment, Energy-Smart Metering System, Compact Embedded Control Board.
Industrial Sensor and Control Hub
The EFM32G280F64-QFP100 fits an industrial control hub that combines several sensor inputs with local actuator control. Its 86 digital I/O pins provide substantial discrete connectivity, while the 32 MHz ARM Cortex-M3 core can execute protocol handling, filtering, and supervisory logic. The 64 kB flash stores application firmware and the 16 kB RAM supports working buffers. Three 16-bit timers are useful for periodic sampling, pulse counting, and motor or timing control. Use an external oscillator when multiple nodes require synchronized timing, and design the 3 V supply with local decoupling close to the package pins.
推荐
Battery-Powered Sensor Node
The EFM32G280F64-QFP100 is suitable for a battery-powered sensor node because Silicon Labs identifies fast wake-up behavior and energy-saving modes as platform capabilities. The 32 MHz Cortex-M3 core provides enough performance to process measurements and prepare data between sleep intervals without requiring a higher-power processor. Its 64 kB flash can hold firmware and fixed parameters, while 16 kB RAM accommodates active acquisition and communication buffers. The 86 I/O pins permit multiple sensing and status connections in a compact assembly. Select capacitors and external components for the lowest achievable standby current, and measure wake-up energy across the complete operating sequence.
推荐
Building Automation Controller
The EFM32G280F64-QFP100 can serve as a building-automation controller for lighting, access, environmental monitoring, and motorized equipment. Its 86 digital I/O pins reduce the need for multiple external I/O expanders, while three 16-bit timers support scheduled operations, pulse metering, and timing-based control. The ARM Cortex-M3 core runs at up to 32 MHz, enabling local control without a network round trip. Its 64 kB flash and 16 kB RAM provide room for a control application, event logic, and communication buffers. Design around the external oscillator option, isolate sensitive signals from switching nodes, and use the manufacturer pin table to separate analog-capable pins from general-purpose I/O.
推荐
Connected Monitoring Equipment
The EFM32G280F64-QFP100 supports compact connected-monitoring equipment that must acquire local data and communicate it through a host interface. Its 32 MHz ARM Cortex-M3 core can manage sampling, protocol framing, data validation, and device-state logic, while 64 kB of flash holds firmware and 16 kB of RAM supports active message handling. The 86 digital I/O pins allow status and alarm lines to be integrated without a large external I/O subsystem. AES capability is relevant to designs requiring encrypted communication or stored-data protection. Keep radio and switching circuitry separated from sensitive pins, provide a stable 3 V rail, and verify the external clock requirements in the system timing plan.
推荐
Energy-Smart Metering System
The EFM32G280F64-QFP100 is appropriate for metering equipment that combines pulse or digital sensor inputs with a low-power embedded controller. The three 16-bit timers can capture frequency or pulse-duration information, while 86 digital I/O pins provide interfaces for sensors, alarm indicators, and control outputs. The 32 MHz Cortex-M3 core performs local calculations without sending every raw measurement to a remote host. Fast wake-up and energy-saving modes help minimize consumption during inactive periods, and the external oscillator option supports stable time measurement when the metering accuracy plan requires it. Validate timing accuracy, thermal behavior, and input thresholds across the full environmental range.
推荐
Compact Embedded Control Board
The EFM32G280F64-QFP100 can anchor a compact embedded control board requiring broad I/O in an LQFP package. Its 86 digital I/O pins make it suitable for LED and button interfaces, external memory buses, communications lines, and actuator drivers. A 32 MHz ARM Cortex-M3 core provides deterministic responsiveness for supervisory logic, while 64 kB of flash and 16 kB of RAM support embedded firmware without an external memory device. The three 16-bit timers offload periodic tasks and timing functions. Because a 100-LQFP footprint has dense routing requirements, place decoupling and support components before fine-pitch traces, maintain a continuous ground reference, and verify programming and boot signals in the first prototype.
推荐
推荐产品汇总
工程参考数据: EFM32G280F64-QFP100 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EFM32G280F64-QFP100T | EFM32G280F64G-E-QFP100 |
|---|---|---|---|
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 kB | 64 kB | 64 kB |
| RAM | 16 kB | 16 kB | 16 kB |
| Ordering-Code Difference | Base F64-QFP100 ordering code | T suffix added | G-E suffix added |
关键差异点
- Broad digital I/O in a 100-LQFP package (对比 EFM32G280F64-QFP100T)
- Three dedicated 16-bit timers for embedded timing functions (对比 EFM32G280F64G-E-QFP100)
- Low-power Gecko platform with fast wake-up behavior (对比 EFM32G880F64-QFP100)
设计说明
Treat the 100-LQFP footprint as a dense routing task. Assign power, ground, clock, reset, programming, and communication pins from the manufacturer pin-description table before laying out signal traces. Place required decoupling capacitors directly beside the corresponding supply pins and use a continuous ground plane beneath the device where layout rules permit. Check pad dimensions, pin-one orientation, solder-mask clearance, and paste volume against the manufacturer package drawing.
Design the 3 V supply path for both normal processing and transient current from enabled peripherals. Keep the MCU branch short, provide local high-frequency decoupling, and avoid sharing narrow traces between the controller and switching or radio loads. If the board enters a low-energy state, confirm that every external rail and pull network returns to a defined level without violating the device's electrical limits.
Do not infer pin compatibility from the package outline alone. Although the listed alternatives use the same 100-LQFP format, verify the exact pin table, temperature grade, clock options, programming interface, and packing orientation. Likewise, 86 digital I/O pins do not mean every package position is a general-purpose GPIO. Use the manufacturer pin names when assigning board functions and avoid reserving power or special-function pads as ordinary signals.
Keep the external oscillator path and sensitive digital inputs away from switching nodes and high-current return paths. Route clock signals over a continuous reference plane, minimize stub branches, and use the shortest practical oscillator connection. For designs using the three 16-bit timers for precision measurement, validate jitter, input thresholds, and timer accuracy on assembled hardware because trace coupling and clock quality can affect the usable measurement margin.
合规信息
The EFM32G280F64-QFP100 is a general-purpose microcontroller rather than an automotive-qualified device. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed for the selected ordering and packing code.