Intel

EP1K100QC208-2NGZ - ACEX-1K 100K Gates FPGA, 147 I/O, 208-PQFP | Intel / Altera

MPN: EP1K100QC208-2NGZ ✗ اختتامِ زندگی

2.375 V to 2.625 V Vdss 208-BFQFP (208-PQFP, Plastic Quad Flat Pack) Package -2 (medium speed) Speed

قیمت کی درخواست کریں

MOQ: 1 |

ڈیٹا شیٹ دیکھیں (PDF) متبادل دیکھیں

مقدار

EP1K100QC208-2NGZ جائزہ

The Intel / Altera EP1K100QC208-2NGZ is a member of the legacy ACEX-1K family of Field Programmable Gate Arrays (FPGAs), delivering 100,000 typical gates and 4,992 logic elements in a 208-pin Plastic Quad Flat Pack (208-BFQFP / 208-PQFP) surface-mount package. The device integrates 624 Logic Array Blocks (LABs) / Configurable Logic Blocks (CLBs), 49,152 bits of embedded SRAM, 147 user I/O pins, and operates from a 2.375V to 2.625V core supply with a commercial 0°C to 70°C temperature grade.

What is an FPGA? A Field Programmable Gate Array is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs/LABs) connected by a programmable interconnect matrix. Unlike an ASIC (Application-Specific Integrated Circuit), an FPGA can be reconfigured in the field after manufacturing, making it ideal for prototyping, low-volume production, glue logic, and applications where design changes are expected. Within the FPGA taxonomy, the EP1K100 sits at the lower-density end: CPLD -> low-density FPGA -> ACEX-1K -> high-density FPGA -> SoC FPGA.

Key specifications include a 2.5V core supply with 5V-tolerant I/O, in-system programmability via the Altera ByteBlaster or BitBlaster configuration interface, and JTAG boundary-scan support. The 'QC208' package code denotes the 208-pin Plastic QFP, the '-2' speed grade indicates the medium-speed tier, and the 'NGZ' suffix indicates the lead-free, RoHS-compliant commercial processing variant.

The EP1K100QC208-2NGZ uses a SRAM-based Look-Up Table (LUT) architecture with four-input LUTs per logic element, and a hierarchical interconnect structure with FastTrack routing. The embedded array blocks (EABs) provide dedicated dual-port RAM resources that are widely used for FIFO buffers and small register files. Configuration data is loaded from an external serial or parallel PROM at power-up, since the SRAM cells are volatile.

Typical applications include digital signal processing front-ends, industrial control glue logic, telecommunications line-card interfaces, PCI bridge controllers, and legacy embedded systems where the ACEX-1K has been a long-standing design-in. The 147 user I/Os are sufficient to drive multiple 16/32-bit buses and external memory interfaces in cost-sensitive designs.

When designing with this device, ensure that configuration memory (typically an EPC2 or EPC16) is included in the BOM, since the EP1K100 has no on-chip non-volatile configuration storage. Decoupling must follow the ACEX-1K Hardware Reference Manual guidelines: 0.1µF + 10µF near each VCCINT pin group. Note that ACEX-1K is now in legacy/discontinued status, so designers should evaluate Cyclone or Cyclone II for new designs.

This page synthesizes distributor stock levels, drop-in same-package ACEX-1K alternatives, and practical design notes not found in the original manufacturer datasheet.

کے لیے ڈراپ اِن متبادل EP1K100QC208-2NGZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP1K100QC208-2NGZ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Family, Speed Grade, Total RAM Bits, Process Technology, Core Supply Voltage.

EP1K100QC208-1

Altera

Family: ACEX-1K

Speed Grade: -1

Process Technology: 0.22 µm