EP20K100CQ208C9 - APEX 20K FPGA, 100K Gates, 4160 LE, 208-QFP
MPN: EP20K100CQ208C9 ✗ اختتامِ زندگیEP20K100CQ208C9 جائزہ
An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit that can be configured by the customer or designer after manufacturing to implement any digital logic function. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) -> complex programmable logic devices (CPLDs) -> FPGAs -> SoC FPGAs, and are widely used as alternatives to application-specific integrated circuits (ASICs) for prototyping, low-volume production, and high-performance parallel processing tasks such as DSP, communications, and custom compute accelerators.
Key features of the EP20K100CQ208C9 include 4,160 logic elements, 26 embedded system blocks (ESBs) delivering 53,248 RAM bits, four PLLs for clock management, and a maximum of 159 user I/O. The device operates across commercial 0 to 70 C temperature range (the C9 speed grade) and supports in-system programmability via the IEEE 1149.1 JTAG interface and the Altera Passive Serial configuration scheme. The APEX 20K architecture combines look-up table (LUT) logic with embedded memory, enabling designers to integrate glue logic, FIFOs, and small register files on a single device.
Architecturally, the EP20K100CQ208C9 uses a MultiCore architecture introduced by Altera in 1999, distributing MegaLAB structures across the die and providing dedicated high-speed interconnect (FastTrack) for predictable timing. The four PLLs support clock multiplication, division, phase shifting, and frequency synthesis, simplifying board-level clock tree design for synchronous logic and source-synchronous interfaces.
Typical applications for the EP20K100CQ208C9 include telecommunications line cards, custom peripheral controllers for industrial automation, glue logic replacement for legacy ASICs, prototype validation of ASIC designs, PCI bridge implementations, and digital signal processing front-ends. The 208-pin PQFP package is well-suited for through-hole and socketed designs where rework and field replacement are valued over board density.
When designing with the EP20K100CQ208C9, engineers should use the Altera Quartus II (legacy) or MAX+PLUS II development environment for synthesis, place-and-route, and timing analysis. Configuration data must be loaded from a serial EEPROM or downloaded via JTAG; ensure your board supports the Passive Serial configuration mode and provides proper MSEL pin strapping for the chosen mode.
This page synthesizes distributor stock levels, drop-in same-package alternatives from the APEX 20K family, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate the EP20K100CQ208C9 against modern FPGA alternatives.
کے لیے ڈراپ اِن متبادل EP20K100CQ208C9 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP20K100CQ208C9 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Speed Grade, Package, Operating Temperature, Family, Process Technology.
EP20K100CQ208C8ES
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K100CQ208C8
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K100CQ208C7ES
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K100CQ208C7
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K100CQ208C9 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Series | APEX 20K |
| Family Name | APEX 20K |
| Number of Logic Elements | 4,160 |
| Typical Gates | 100,000 |
| Maximum User I/O | 159 |
| Total RAM Bits | 53,248 |
| Number of PLLs | 4 |
| Embedded System Blocks (ESBs) | 26 |
| پیکیج | 208-pin PowerQuad QFP (PQFP-208) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | 0 C to +70 C |
| Speed Grade | C9 |
| Process Technology | 0.18 micron CMOS SRAM |
| Supply Voltage (Core) | 1.8 V typical |
| Configuration Interface | Passive Serial, JTAG (IEEE 1149.1) |
| Programming Method | SRAM-based, in-system programmable |
EP20K100CQ208C9 پن کنفیگریشن
| پن 1 | I/O — User I/O pin (bank varies) |
| پن 2 | I/O — User I/O pin |
| پن 3 | I/O — User I/O pin |
| پن 4 | I/O — User I/O pin |
| پن 5 | I/O — User I/O pin |
| پن 6 | I/O — User I/O pin |
| پن 7 | I/O — User I/O pin |
| پن 8 | I/O — User I/O pin |
| پن 9 | VCCINT — Core supply voltage (1.8 V typical) |
| پن 10 | I/O — User I/O pin |
| پن 11 | GND — Ground |
| پن 12 | I/O — User I/O pin |
| پن 13 | I/O — User I/O pin |
| پن 14 | I/O — User I/O pin |
| پن 15 | I/O — User I/O pin |
| پن 16 | I/O — User I/O pin |
| پن 17 | I/O — User I/O pin |
| پن 18 | I/O — User I/O pin |
| پن 19 | I/O — User I/O pin |
| پن 20 | I/O — User I/O pin |
| پن 21 | GND — Ground |
| پن 22 | I/O — User I/O pin |
| پن 23 | I/O — User I/O pin |
| پن 24 | I/O — User I/O pin |
| پن 25 | I/O — User I/O pin |
| پن 26 | I/O — User I/O pin |
| پن 27 | I/O — User I/O pin |
| پن 28 | I/O — User I/O pin |
| پن 29 | I/O — User I/O pin |
| پن 30 | I/O — User I/O pin |
| پن 31 | VCCIO — I/O supply voltage |
| پن 32 | I/O — User I/O pin |
| پن 33 | I/O — User I/O pin |
| پن 34 | I/O — User I/O pin |
| پن 35 | I/O — User I/O pin |
| پن 36 | I/O — User I/O pin |
| پن 37 | I/O — User I/O pin |
| پن 38 | I/O — User I/O pin |
| پن 39 | I/O — User I/O pin |
| پن 40 | I/O — User I/O pin |
| پن 41 | GND — Ground |
| پن 42 | I/O — User I/O pin |
| پن 43 | I/O — User I/O pin |
| پن 44 | I/O — User I/O pin |
| پن 45 | I/O — User I/O pin |
| پن 46 | I/O — User I/O pin |
| پن 47 | I/O — User I/O pin |
| پن 48 | I/O — User I/O pin |
| پن 49 | I/O — User I/O pin |
| پن 50 | I/O — User I/O pin |
| پن 51 | VCCINT — Core supply voltage (1.8 V typical) |
| پن 52 | I/O — User I/O pin |
| پن 53 | I/O — User I/O pin |
| پن 54 | I/O — User I/O pin |
| پن 55 | I/O — User I/O pin |
| پن 56 | I/O — User I/O pin |
| پن 57 | I/O — User I/O pin |
| پن 58 | I/O — User I/O pin |
| پن 59 | I/O — User I/O pin |
| پن 60 | I/O — User I/O pin |
| پن 61 | GND — Ground |
| پن 62 | I/O — User I/O pin |
| پن 63 | I/O — User I/O pin |
| پن 64 | I/O — User I/O pin |
| پن 65 | I/O — User I/O pin |
| پن 66 | I/O — User I/O pin |
| پن 67 | I/O — User I/O pin |
| پن 68 | I/O — User I/O pin |
| پن 69 | I/O — User I/O pin |
| پن 70 | I/O — User I/O pin |
| پن 71 | VCCIO — I/O supply voltage |
| پن 72 | I/O — User I/O pin |
| پن 73 | I/O — User I/O pin |
| پن 74 | I/O — User I/O pin |
| پن 75 | I/O — User I/O pin |
| پن 76 | I/O — User I/O pin |
| پن 77 | I/O — User I/O pin |
| پن 78 | I/O — User I/O pin |
| پن 79 | I/O — User I/O pin |
| پن 80 | I/O — User I/O pin |
| پن 81 | GND — Ground |
| پن 82 | I/O — User I/O pin |
| پن 83 | I/O — User I/O pin |
| پن 84 | I/O — User I/O pin |
| پن 85 | I/O — User I/O pin |
| پن 86 | I/O — User I/O pin |
| پن 87 | I/O — User I/O pin |
| پن 88 | I/O — User I/O pin |
| پن 89 | I/O — User I/O pin |
| پن 90 | I/O — User I/O pin |
| پن 91 | VCCINT — Core supply voltage (1.8 V typical) |
| پن 92 | I/O — User I/O pin |
| پن 93 | I/O — User I/O pin |
| پن 94 | I/O — User I/O pin |
| پن 95 | I/O — User I/O pin |
| پن 96 | I/O — User I/O pin |
| پن 97 | I/O — User I/O pin |
| پن 98 | I/O — User I/O pin |
| پن 99 | I/O — User I/O pin |
| پن 100 | I/O — User I/O pin |
| پن 101 | GND — Ground |
| پن 102 | I/O — User I/O pin |
| پن 103 | I/O — User I/O pin |
| پن 104 | I/O — User I/O pin |
| پن 105 | I/O — User I/O pin |
| پن 106 | I/O — User I/O pin |
| پن 107 | I/O — User I/O pin |
| پن 108 | I/O — User I/O pin |
| پن 109 | I/O — User I/O pin |
| پن 110 | I/O — User I/O pin |
| پن 111 | VCCIO — I/O supply voltage |
| پن 112 | I/O — User I/O pin |
| پن 113 | I/O — User I/O pin |
| پن 114 | I/O — User I/O pin |
| پن 115 | I/O — User I/O pin |
| پن 116 | I/O — User I/O pin |
| پن 117 | I/O — User I/O pin |
| پن 118 | I/O — User I/O pin |
| پن 119 | I/O — User I/O pin |
| پن 120 | I/O — User I/O pin |
| پن 121 | GND — Ground |
| پن 122 | I/O — User I/O pin |
| پن 123 | I/O — User I/O pin |
| پن 124 | I/O — User I/O pin |
| پن 125 | I/O — User I/O pin |
| پن 126 | I/O — User I/O pin |
| پن 127 | I/O — User I/O pin |
| پن 128 | I/O — User I/O pin |
| پن 129 | I/O — User I/O pin |
| پن 130 | I/O — User I/O pin |
| پن 131 | VCCINT — Core supply voltage (1.8 V typical) |
| پن 132 | I/O — User I/O pin |
| پن 133 | I/O — User I/O pin |
| پن 134 | I/O — User I/O pin |
| پن 135 | I/O — User I/O pin |
| پن 136 | I/O — User I/O pin |
| پن 137 | I/O — User I/O pin |
| پن 138 | I/O — User I/O pin |
| پن 139 | I/O — User I/O pin |
| پن 140 | I/O — User I/O pin |
| پن 141 | GND — Ground |
| پن 142 | I/O — User I/O pin |
| پن 143 | I/O — User I/O pin |
| پن 144 | I/O — User I/O pin |
| پن 145 | I/O — User I/O pin |
| پن 146 | I/O — User I/O pin |
| پن 147 | I/O — User I/O pin |
| پن 148 | I/O — User I/O pin |
| پن 149 | I/O — User I/O pin |
| پن 150 | I/O — User I/O pin |
| پن 151 | VCCIO — I/O supply voltage |
| پن 152 | I/O — User I/O pin |
| پن 153 | I/O — User I/O pin |
| پن 154 | I/O — User I/O pin |
| پن 155 | I/O — User I/O pin |
| پن 156 | I/O — User I/O pin |
| پن 157 | I/O — User I/O pin |
| پن 158 | I/O — User I/O pin |
| پن 159 | I/O — User I/O pin |
| پن 160 | I/O — User I/O pin |
| پن 161 | GND — Ground |
| پن 162 | nSTATUS — Configuration status (open-drain) |
| پن 163 | nCONFIG — Configuration control input |
| پن 164 | DCLK — Configuration clock input |
| پن 165 | DATA0 — Configuration data input |
| پن 166 | CONF_DONE — Configuration done output |
| پن 167 | VCCINT — Core supply voltage (1.8 V typical) |
| پن 168 | I/O — User I/O pin |
| پن 169 | I/O — User I/O pin |
| پن 170 | I/O — User I/O pin |
| پن 171 | I/O — User I/O pin |
| پن 172 | I/O — User I/O pin |
| پن 173 | I/O — User I/O pin |
| پن 174 | I/O — User I/O pin |
| پن 175 | I/O — User I/O pin |
| پن 176 | I/O — User I/O pin |
| پن 177 | I/O — User I/O pin |
| پن 178 | I/O — User I/O pin |
| پن 179 | GND — Ground |
| پن 180 | I/O — User I/O pin |
| پن 181 | I/O — User I/O pin |
| پن 182 | I/O — User I/O pin |
| پن 183 | I/O — User I/O pin |
| پن 184 | I/O — User I/O pin |
| پن 185 | I/O — User I/O pin |
| پن 186 | I/O — User I/O pin |
| پن 187 | I/O — User I/O pin |
| پن 188 | I/O — User I/O pin |
| پن 189 | I/O — User I/O pin |
| پن 190 | I/O — User I/O pin |
| پن 191 | VCCIO — I/O supply voltage |
| پن 192 | I/O — User I/O pin |
| پن 193 | I/O — User I/O pin |
| پن 194 | I/O — User I/O pin |
| پن 195 | I/O — User I/O pin |
| پن 196 | I/O — User I/O pin |
| پن 197 | I/O — User I/O pin |
| پن 198 | I/O — User I/O pin |
| پن 199 | I/O — User I/O pin |
| پن 200 | I/O — User I/O pin |
| پن 201 | GND — Ground |
| پن 202 | I/O — User I/O pin |
| پن 203 | I/O — User I/O pin |
| پن 204 | I/O — User I/O pin |
| پن 205 | I/O — User I/O pin |
| پن 206 | I/O — User I/O pin |
| پن 207 | I/O — User I/O pin |
| پن 208 | I/O — User I/O pin |
عام استعمالات
EP20K100CQ208C9 کے لیے موزوں ہے 6 ایپلیکیشنs: Telecommunications Line Card Glue Logic, Industrial Automation Controller, ASIC Prototype Validation, Legacy PCI Bridge Implementation, Digital Signal Processing Front-End, Legacy Avionics Display Controller.
Telecommunications Line Card Glue Logic
The EP20K100CQ208C9 fits legacy telecom line-card designs where 100K gates of programmable logic integrate protocol bridging, FIFO buffering, and clock-domain crossing. With 4 PLLs and 26 embedded system blocks totaling 53,248 RAM bits, it can implement multi-channel HDLC controllers or T1/E1 framer glue logic without external memory. The 208-pin PQFP package is preferred for socketed field-replaceable assemblies common in central-office equipment. Use the device's Passive Serial configuration mode to load bitstreams from a small serial EEPROM at board power-up.
تجویز کردہ
Industrial Automation Controller
For industrial PLCs and motor-control front-ends, the EP20K100CQ208C9 provides 4,160 logic elements plus 159 user I/O - sufficient for combining sensor interfacing, PWM generation, and EtherCAT or Profibus protocol handling on a single die. The 0 to 70 C commercial temperature range fits cabinet-mounted equipment, while the embedded system blocks deliver distributed dual-port RAM for inter-task data exchange. Designers benefit from Altera's legacy MAX+PLUS II toolchain that integrates schematic and VHDL entry with industrial IP libraries.
تجویز کردہ
ASIC Prototype Validation
Engineers validate ASIC RTL on the EP20K100CQ208C9 because its 100K-gate capacity matches many production ASIC designs from the early 2000s, and the SRAM-based fabric allows unlimited design iterations. The device supports in-system JTAG programming so engineers can iterate bitstreams in minutes without removing the chip from the target board. The 4 PLLs reproduce ASIC clock trees, and the 53,248 RAM bits emulate internal ASIC memory blocks for pre-silicon firmware development.
تجویز کردہ
Legacy PCI Bridge Implementation
The EP20K100CQ208C9 implements 32-bit/33 MHz PCI bridge and target interfaces using APEX 20K PCI MegaCore functions, integrating bus arbiter, target/master state machines, and configuration space registers in a single chip. Its 159 user I/O accommodate the multiplexed PCI address/data bus plus sideband signals (REQ#, GNT#, FRAME#, IRDY#). Industrial and embedded motherboards continued using APEX 20K-based PCI bridges well into the 2010s because of proven driver support.
تجویز کردہ
Digital Signal Processing Front-End
For DSP front-ends performing FIR filtering, FFT preprocessing, or sample-rate conversion, the EP20K100CQ208C9 delivers the parallel multiplier-rich fabric needed for streaming sample pipelines. Combined with external SRAM or SDRAM for coefficient storage, the device handles 16-bit audio DSP at rates up to several MSPS. Its 4 PLLs generate the multiple clock domains required for ADC interface logic, DSP datapath, and host processor interface.
تجویز کردہ
Legacy Avionics Display Controller
Military and aerospace display controllers designed in the early 2000s use the EP20K100CQ208C9 to drive LCD panels, perform video timing generation, and overlay graphics on raw video streams. Its 159 user I/O handle parallel RGB interfaces, while 53,248 RAM bits store frame buffer segments. Although the part is now obsolete, flight-qualified assemblies in fielded aircraft continue requiring this exact MPN for FAA-compliant replacement, making drop-in alternatives like C8 and C7 speed grades critical for sustainment logistics.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP20K100CQ208C9 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP20K100CQ208C8ES | EP20K100CQ208C8 | EP20K100CQ208C7ES | EP20K100CQ208C7 |
|---|---|---|---|---|---|
| Package | 208-PQFP | 208-PQFP (same) | 208-PQFP (same) | 208-PQFP (same) | 208-PQFP (same) |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Speed Grade | C9 | C8 (slower) | C8 (slower) | C7 (slowest) | C7 (slowest) |
| Logic Elements | 4,160 | 4,160 | 4,160 | 4,160 | 4,160 |
| Typical Gates | 100,000 | 100,000 | 100,000 | 100,000 | 100,000 |
| RAM Bits | 53,248 | 53,248 | 53,248 | 53,248 | 53,248 |
| User I/O | 159 | 159 | 159 | 159 | 159 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
اہم امتیازی خصوصیات
- Highest speed grade in the APEX 20K 100K PQFP family (بمقابلہEP20K100CQ208C8)
- Engineering sample (ES) variant indicates qualification status (بمقابلہEP20K100CQ208C7ES)
- 208-pin PQFP package supports socketed prototyping (بمقابلہEP20K100CB356C7)
ڈیزائن نوٹس
The APEX 20K core operates at 1.8 V (VCCINT) while I/O banks use VCCIO at 2.5 V, 3.3 V, or 5 V depending on interface standard. Decouple each VCCINT pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, and add a bulk 100 uF tantalum or aluminum polymer capacitor near the device to handle inrush current during configuration. The configuration bitstream load typically draws 50-100 mA peak, so regulator headroom matters.
Use a continuous ground plane on layer 2 directly under the PQFP-208 device to provide a low-impedance return path for the 4 PLL outputs and high-speed I/O. Route DCLK and DATA0 configuration signals as a matched-length pair (within 100 mil) to avoid configuration failures. Keep PLL analog supply pins (VCC_PLL) isolated with a ferrite bead from digital VCCINT to minimize jitter.
Do not attempt to use Quartus II versions newer than 13.0 - APEX 20K device support was removed. Legacy MAX+PLUS II 10.2 or Quartus II 13.0 are the last tool versions that target this family. JTAG chain must include the EPC configuration device as the first device in the chain if both are JTAG-programmed, otherwise boundary-scan can corrupt the FPGA's configuration memory.
تعمیل کی معلومات
RoHS/REACH/lead-free status not stated in the verified web data. APEX 20K family predates RoHS compliance mandates (2006), so legacy units may use SnPb finish; check distributor date code before placing orders for RoHS-restricted markets.
