EP20K200CF672C7ES - APEX-II 200K Gate FPGA, 672-BGA | Intel
MPN: EP20K200CF672C7ES ✗ اختتامِ زندگیEP20K200CF672C7ES جائزہ
An FPGA (Field-Programmable Gate Array) is a semiconductor device whose logic fabric, interconnect, and I/O can be reconfigured after manufacturing, enabling rapid prototyping and hardware-level parallelism. APEX-II sits between classic gate arrays and high-end SoCs: each device combines Look-Up Table (LUT)-based logic, embedded memory blocks, and a high-speed PLD-style interconnect. Within Intel's (formerly Altera's) product taxonomy, APEX-II belongs to the broader Programmable Logic Device (PLD) category, alongside predecessors like FLEX 10K and successors like Cyclone/Stratix families.
Key features include 8,320 logic elements (LEs), up to 106 Kbits of embedded RAM distributed across embedded system blocks, four Phase-Locked Loops (PLLs) for clock management, and MultiVolt I/O supporting 1.5V/1.8V/2.5V/3.3V interfaces. The 672-ball BGA exposes up to 376 user I/O pins, making the EP20K200CF672C7ES well suited for high-density bus aggregation, memory interfaces, and parallel DSP-style datapaths.
Architecturally, APEX-II uses a row-and-column interconnect with continuous FastTrack channels that deliver predictable timing across the die, allowing designers to push designs to higher clock rates than older FLEX architectures. Each Logic Array Block (LAB) groups 10 LEs and is fed by local and global routing resources, while ESBs can be configured as either dual-port RAM or FIFO buffers.
Typical applications include telecommunications line-card glue logic, industrial motor-control co-processors, parallel DSP pipelines, ASIC prototyping, and high-density bus-bridging interfaces. With 200K gates of usable logic, the device targets medium-complexity designs that exceed CPLD capacity but do not require a full Stratix-class solution.
When designing with this part, note that the 672-ball BGA requires a multi-layer PCB with controlled-impedance routing, via-in-pad or microvia assembly, and Xilinx/Altera (Intel) configuration PROM support. Designers should use the legacy Quartus II programmer for bitstream loading (Max+Plus II is also supported) and verify JTAG chain integrity on every board revision.
کے لیے ڈراپ اِن متبادل EP20K200CF672C7ES — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP20K200CF672C7ES (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Speed Grade, Family, Process Technology, System Gates, Mounting Type.
EP20K400CF672C7ES
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K1000CF672C7ES
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K200CF672C8ES
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K200CF672C9ES
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EP20K600CF672C7ES
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K200CF672C7ES زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | APEX-II (EP20K) |
| Logic Elements | 8,320 |
| Typical Gates | 200,000 |
| Embedded RAM (max) | 106,496 bits |
| Number of Logic Array Blocks (LABs) | 832 |
| Maximum User I/O Pins | 376 |
| Number of PLLs | 4 |
| پیکیج | 672-ball FineLine BGA |
| ماؤنٹنگ ٹائپ | Surface Mount (BGA) |
| Core Voltage | 1.8 V |
| آپریٹنگ درجہ حرارت | 0 °C to +85 °C (Commercial) |
| Speed Grade | 7 |
| Process Technology | 0.18 µm CMOS |
| نمی حساسیت کی سطح (MSL) | 3 (168 Hours) |
| Packaging | Tray |
EP20K200CF672C7ES 672-ball fineline bga پن کنفیگریشن گائیڈ
EP20K200CF672C7ES (672-ball fineline bga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EP20K200CF672C7ES.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
EP20K200CF672C7ES کے لیے موزوں ہے 6 ایپلیکیشنs: Telecommunications Line-Card Glue Logic, Industrial Motor-Control Co-Processor, Parallel DSP / DSP-Farm Datapath, ASIC Prototyping, High-Density Bus Bridging & Aggregation, Legacy Medical Imaging Back-End.
Telecommunications Line-Card Glue Logic
The EP20K200CF672C7ES integrates 8,320 logic elements and 376 user I/Os in a 672-ball BGA, making it a strong fit for legacy telecom line cards that aggregate low-speed framers, map UTMI/STI traffic, and bridge to a backplane ASIC. With four PLLs and MultiVolt I/O (1.5V/1.8V/2.5V/3.3V), the device consolidates discrete 74-series logic and bridges multiple voltage domains on a single chip, simplifying board layout. Designers can use the 106 Kbits of embedded RAM for short packet FIFOs and elastic buffers. Although the part is obsolete, it remains a drop-in solution for sustaining legacy central-office equipment where redesign is not cost-justified.
تجویز کردہ
Industrial Motor-Control Co-Processor
Industrial servo and variable-frequency drives often pair an MCU with a programmable-logic co-processor that handles PWM generation, encoder decoding, and high-speed protection logic. The EP20K200CF672C7ES delivers 8,320 LEs sufficient for 3-phase PWM, Hall-sensor decoding, and EtherCAT-related glue logic, while its 376 I/Os interface directly to industrial 24V signaling via external isolators. The four PLLs generate deterministic, jitter-controlled PWM clocks, and the 1.8V core voltage tolerates warm industrial enclosures at 0–85 °C.
تجویز کردہ
Parallel DSP / DSP-Farm Datapath
Mid-complexity DSP systems such as baseband pre-processors, video line buffers, and FIR filter arrays benefit from the APEX-II's LUT-based fabric and dual-port ESBs. The 106 Kbits of embedded RAM is configurable as dual-port memory or small FIFOs, allowing the FPGA to implement systolic FIR / FFT structures at the LEs' full clock speed. With 8,320 LEs available, designers can run 4–8 parallel FIR filters or a 64-point radix-4 FFT datapath. While obsolete, the EP20K200CF672C7ES is sometimes found in sustaining-design defense and instrumentation programs.
تجویز کردہ
ASIC Prototyping
Before committing an ASIC to fabrication, designers verify RTL on a large FPGA. The EP20K200CF672C7ES is occasionally found in legacy ASIC-emulation boards, mapping single ASIC blocks to one device. The 672-ball BGA gives 376 user I/Os - enough to expose a large SoC bus plus test headers. Quartus II supports partitioned multi-FPGA prototyping flows. For new programs, designers usually move to Stratix/Cyclone 10 LP or modern emulation platforms because APEX-II parts are obsolete.
تجویز کردہ
High-Density Bus Bridging & Aggregation
The device's 376 user I/O pins allow it to aggregate multiple parallel buses (e.g., local SRAM, Flash, LCD, USB, and GPIO) into a single high-speed upstream interface. Its MultiVolt I/O support (1.5V/1.8V/2.5V/3.3V) connects directly to mixed-voltage peripherals without external level translators, reducing board area and BOM cost. In legacy printers, scanners, and industrial HMIs, EP20K200CF672C7ES can serve as a custom north-bridge style aggregator.
تجویز کردہ
Legacy Medical Imaging Back-End
Some certified medical imaging systems (ultrasound front-ends, MRI back-end preprocessing) built in the early 2000s were designed around APEX-II FPGAs. The EP20K200CF672C7ES can still be specified in maintenance contracts where re-validation of the entire system would be prohibitively expensive. Its deterministic FastTrack interconnect, predictable timing closure, and 1.8V core remain compatible with the original schematics and timing budgets.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP20K200CF672C7ES — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP20K400CF672C7ES | EP20K1000CF672C7ES | EP20K200CF672C8ES | EP20K600CF672C7ES |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | 672-ball FineLine BGA | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same |
| Logic Elements | 8,320 | 16,640 | 38,400 | 8,320 | ~24,192 |
| Typical Gates | 200,000 | 400,000 | 1,000,000 | 200,000 | 600,000 |
| Embedded RAM | 106,496 bits | 212,992 bits | 540,672 bits | 106,496 bits | ~327,680 bits |
| Speed Grade | 7 | 7 | 7 | 8 | 7 |
| Operating Temperature | 0 °C to +85 °C (Commercial) | 0 °C to +85 °C (Commercial) | 0 °C to +85 °C (Commercial) | 0 °C to +85 °C (Commercial) | 0 °C to +85 °C (Commercial) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
اہم امتیازی خصوصیات
- Mid-density APEX-II with strong I/O count (بمقابلہEP20K200CF484I8N)
- Capacity-over-room option to higher density in same package (بمقابلہEP20K1000CF672C7ES)
- Multiple speed-grade options for cost/performance tuning (بمقابلہEP20K200CF672C9ES)
ڈیزائن نوٹس
The 672-ball FineLine BGA requires a high-density PCB with microvia or via-in-pad technology. Designers should use at least 6 PCB layers with dedicated GND and 1.8 V VCCINT planes directly under the device. Use 0.4 mm or 0.5 mm ball pitch with controlled-impedance traces; for DDR/SSTL interfaces impedance must be tuned to 50 ohms ±10%. The exposed balls on the bottom of the BGA demand full-array reflow profiling per J-STD-020 to avoid head-in-pillow defects.
Estimated: at 50% LE utilization with typical toggle rate, VCCINT draws roughly 0.5–1.0 A, and each VCCIO bank draws up to 0.3 A. Designers should budget 4–6 distributed decoupling capacitors (0.1 µF X7R + 10 µF tantalum) around each power ball. A 1.8 V LDO with 1.5 A headroom is recommended; for hot-running designs use a buck regulator followed by an LDO post-regulator. Sequence VCCINT before VCCIO per APEX-II datasheet to avoid in-rush latch-up.
Do not attempt to load a Quartus II Stratix/Cyclone bitstream - the configuration format is incompatible with APEX-II. Use Quartus II v4.x or Max+Plus II baselines. EP20K200CF672C7ES is obsolete; long-term reliability programs should verify Date Code, moisture sensitivity level (MSL3, 168 h floor life), and pre-bake components prior to reflow. JTAG TCK should be kept under 10 MHz for chain integrity.
تعمیل کی معلومات
Lead-free ES suffix per legacy Altera ordering code; RoHS status should be re-verified from the broker's CoC because APEX-II is obsolete and stock may include both Pb and Pb-free finishes.