EP3SE50F780C4N - 49KLE Stratix III E FPGA 780-FBGA | Intel / Altera
MPN: EP3SE50F780C4N ✗ اختتامِ زندگیEP3SE50F780C4N جائزہ
A field-programmable gate array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and dedicated silicon resources such as block RAM, DSP blocks, and high-speed transceivers. The Stratix III E family belongs to the high-end Altera/Intel FPGA taxonomy, positioned between Cyclone low-cost families and Stratix V high-end families, and was designed to balance logic density, transceivers, and power efficiency for mid-2000s to early-2010s system designs.
Key features of the EP3SE50F780C4N include up to 12 transceiver channels (per Stratix III E family capability), 432 DSP blocks (18x18 multipliers), hard PCIe, DDR2/DDR3 memory controllers, and a Programmable Power Technology that reduces dynamic power by up to 30%. The device also offers comprehensive configuration support via JTAG, passive serial, and Fast passive parallel modes.
Architecturally, the Stratix III E fabric uses adaptive logic modules (ALMs) of 8-input fracturable look-up tables, enabling efficient packing of arithmetic, multiplexer, and register functions. Combined with 8-input fracturable LUTs, dedicated memory and DSP blocks, the EP3SE50F780C4N achieves 1.6 Gbps LVDS performance and supports high-speed external memory interfaces including DDR3 SDRAM up to 800 MHz.
Typical applications include high-speed DSP pipelines in telecom base stations, ASIC prototyping, broadband channel cards, industrial motor control and automation, and PCIe-accelerated compute cards. Designers typically pair this FPGA with DDR3 memory, high-speed ADCs/DACs, and SFP/SFP+ optical transceivers.
Designers should note that Stratix III is a legacy family (NRND/EOL at Intel). New designs should consider Cyclone V or Stratix V/V10 families, while legacy replacements should verify pin and bitstream compatibility. The 780-FBGA package uses 1.0 mm ball pitch and requires PCB design rules for fine-pitch BGA fanout.
This page consolidates pricing, lifecycle, parametric, and drop-in cross-references for the EP3SE50F780C4N - data not found in any single distributor listing or even the manufacturer datasheet - to support both procurement and engineering decisions for legacy Stratix III designs.
کے لیے ڈراپ اِن متبادل EP3SE50F780C4N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP3SE50F780C4N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Speed Grade, Operating Temperature, Family, Mounting Type.
EP3SE50F780C4LN
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP3SE50F780C4LG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP3SE50F780C4L
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP3SE50F780C4G
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP3SE50F780C4
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP3SE110F780C4N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP3SE110F780C4LN
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP3SE50F780C4N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | Stratix III E |
| Logic Elements (LE) | 47,500 |
| Embedded Memory Bits | 5,760,000 |
| Embedded Memory (M9K/M144K blocks) | 488 (per family datasheet) |
| Number of LABs | 1900 |
| Maximum User I/Os | 488 |
| DSP Blocks (18x18 multipliers) | 432 |
| PLLs | 12 (per family datasheet) |
| Maximum Operating Frequency | 717 MHz |
| Transceiver Channels | Up to 12 (per family, model-dependent) |
| Transceiver Data Rate | Up to 6.375 Gbps (per Stratix III E family) |
| Process Node | 40 nm |
| پیکیج | 780-Ball FBGA, 29 mm x 29 mm, 1.0 mm pitch |
| ماؤنٹنگ ٹائپ | Surface Mount (BGA) |
| سپلائی وولٹیج | Core 0.9 V, I/O 1.2 V-3.3 V (multi-rail) |
| آپریٹنگ درجہ حرارت | 0C to +85C (C4 commercial grade) |
| Configuration Modes | JTAG, Passive Serial, Fast Passive Parallel |
| RoHS اسٹیٹس | Lead-free / RoHS compliant |
| MSL لیول | 3 (per JEDEC J-STD-020, FBGA package) |
| Hard Memory Controller | DDR2/DDR3 SDRAM (per Stratix III E family) |
EP3SE50F780C4N 780-ball fbga, 29 mm x 29 mm, 1.0 mm pitch پن کنفیگریشن گائیڈ
EP3SE50F780C4N (780-ball fbga, 29 mm x 29 mm, 1.0 mm pitch پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EP3SE50F780C4N.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
EP3SE50F780C4N کے لیے موزوں ہے 6 ایپلیکیشنs: Telecom Base-Station DSP Pipeline, ASIC Prototyping and Emulation, Industrial Motor Control and Servo Drives, High-Speed ADC/DAC Signal Processing, PCIe-Accelerated Compute Cards, Broadband Channel Cards and Line Cards.
Telecom Base-Station DSP Pipeline
The EP3SE50F780C4N's 432 DSP blocks (18x18 multipliers) and 717 MHz fabric speed fit DSP-heavy base-station baseband processing such as CPRI front-haul aggregation, channel-card FIR filtering, and crest-factor reduction. Placed on a line card with 6 Gbps transceivers for CPRI/OBSAI backhaul, the FPGA runs multiple parallel antenna-carrier chains. With 5.76 Mbit block RAM, designers can buffer symbol-rate data on-chip without external memory pressure; unlike ASIC solutions it allows late-stage radio-standard changes.
تجویز کردہ
ASIC Prototyping and Emulation
With 47.5K LEs, 5.76 Mbit memory, and 432 DSP blocks the EP3SE50F780C4N serves as a multi-FPGA ASIC prototyping platform for pre-silicon validation of mid-complexity SoCs. Designers partition the ASIC RTL across multiple Stratix III boards using TDM-based pin multiplexing and T-Run-Time-emulation flows in Quartus II. The 780-FBGA package supports 488 user I/Os, enough to map a 256-bit-wide ASIC interface plus JTAG, UART, and PCIe debug channels.
تجویز کردہ
Industrial Motor Control and Servo Drives
The EP3SE50F780C4N drives multi-axis industrial servo loops with high-resolution PWM, encoder decoding, and field-oriented control (FOC) algorithms. Its 432 DSP blocks execute 18x18 multiply-accumulate at sub-microsecond latency for torque-loop closure; 488 user I/Os accept quadrature encoders, Hall sensors, and Sigma-Delta ADCs. Industrial designers benefit from the FPGA's deterministic latency and ability to harden their control algorithms as IP against obsolescence.
تجویز کردہ
High-Speed ADC/DAC Signal Processing
Stratix III E's up-to-12 transceiver channels operating at 6.375 Gbps pair naturally with high-speed JESD204B ADC/DAC front-ends in radar, EW, and test-instrumentation cards. The FPGA's 717 MHz fabric performs real-time decimation filtering, FFT, and beamforming in radar receivers. The 5.76 Mbit block RAM stores intermediate FFT bins, while 432 DSP blocks execute complex multipliers at full throughput for chirp-processing in modern radar waveforms.
تجویز کردہ
PCIe-Accelerated Compute Cards
Stratix III E hard PCIe IP blocks (x1/x4/x8 Gen1-2) make the EP3SE50F780C4N a strong fit for PCIe-form-factor compute accelerators in image processing, financial Monte Carlo, and database query offload. The FPGA offloads host CPU through DMA-driven PCIe and exposes accelerator functions as BAR-mapped MMIO regions. 488 user I/Os break out to on-card DDR3 SODIMMs, multiple SFP+ cages, and GPIO for control-plane signalling in a half-length PCIe card.
تجویز کردہ
Broadband Channel Cards and Line Cards
Stratix III E cards in ATCA / AdvancedTCA and proprietary chassis aggregate 10G/40G optical links using the FPGA's high-speed transceivers. The EP3SE50F780C4N with up to 12 transceiver channels terminates multiple SFP+ ports, runs packet classification, traffic shaping, and OAM processing in hardware. 5.76 Mbit on-chip buffer memory handles burst-mode line-card traffic without external TCAM dependency, simplifying BOM and shortening time-to-market.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP3SE50F780C4N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP3SE50F780C4LN | EP3SE50F780C4LG | EP3SE50F780C4 | EP3SE110F780C4N |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | 780-Ball FBGA (29 mm x 29 mm) | 780-Ball FBGA (same) | 780-Ball FBGA (same) | 780-Ball FBGA (same) | 780-Ball FBGA (same) |
| Logic Elements | 47,500 | 47,500 | 47,500 | 47,500 | 106,500 |
| Embedded Memory | 5.76 Mbit | 5.76 Mbit | 5.76 Mbit | 5.76 Mbit | 9.39 Mbit |
| DSP Blocks | 432 | 432 | 432 | 432 | 896 |
| User I/Os | 488 | 488 | 488 | 488 | 488 |
| Speed Grade | C4 (commercial, 717 MHz) | C4 | C4 | C4 | C4 |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND |
اہم امتیازی خصوصیات
- Identical silicon with lead-free N suffix variant (بمقابلہEP3SE50F780C4LN)
- 2.2x logic capacity in same package (بمقابلہEP3SE110F780C4N)
- Long product legacy with extensive IP ecosystem (بمقابلہCyclone III LS family)
ڈیزائن نوٹس
Estimated: At 50% utilization, 400 MHz core frequency, and full transceiver activity, the EP3SE50F780C4N dissipates approximately 6-12 W. The 780-FBGA package requires a thermal pad bonded to an inner copper plane on the PCB; minimum 8 thermal vias in a 4x2 array beneath the die are recommended. With theta-JA around 12-15 C/W on a 12-layer PCB, junction temperature should stay below 100C at 85C ambient when the heatsink spreader is used. Always run the Quartus II Early Power Estimator before committing to a thermal solution.
The 780-FBGA uses 1.0 mm ball pitch, requiring 0.6 mm pad diameter with NSMD (non-solder-mask-defined) pads and microvia-in-pad (0.1 mm/0.25 mm) escape routing. Maintain 0.5 mm trace width with 0.2 mm clearance on the top layer and route 5 inner signal layers with GND/PWR plane pairs. DDR3 traces need length matching within +/-25 mil (data) and +/-50 mil (address/control); use the Quartus II pin planner to balance groups before routing.
Do not assume bitstream compatibility between EP3SE50 and EP3SE110 - the Quartus II compile MUST be regenerated with the new device selected. Hot-swap of configuration flash between speed grades (e.g. C4 vs C5) requires only an updated .sof/.pof, but cross-die hot-swap will fail power-on. Confirm transceiver reference clock routing does not exceed 12 inches and stays impedance-controlled (100 ohm differential). Avoid mixing C4 and I4 (industrial) grade parts in production bins - although pin-compatible, thermal and timing guarantees differ.
تعمیل کی معلومات
RoHS and lead-free compliance verified per manufacturer datasheet. Halogen-free status not specifically disclosed in the public Stratix III E datasheet and is marked unknown. AEC-Q100 not applicable - this is a commercial-grade FPGA (C4 grade, 0C to 85C operating range).
