EP610PC-30 - 16-Macrocell Classic EPLD, 30ns, PDIP-24 | Altera
MPN: EP610PC30 ✗ اختتامِ زندگیEP610PC30 جائزہ
A PLD (Programmable Logic Device) is a digital integrated circuit whose internal logic structure and interconnect are user-configurable after manufacture, allowing engineers to implement custom glue logic, state machines, address decoding, and bus arbitration without committing to a custom ASIC. Within the broader taxonomy, the EP610 sits at: PLD -> EPLD (erasable, UV-window package optional) -> Classic EPLD family -> small-scale (16-macrocell) glue-logic segment. Compared to early bipolar PALs, the EP610 family added CMOS low power consumption, macrocell-based architecture (sum-of-products plus an output register), and erasable programming.
Key features of the EP610PC-30 include 16 macrocells with configurable output polarity and feedback, 300 usable gates of logic capacity, pin-to-pin propagation delay of 30 ns (commercial speed grade), a maximum toggle frequency of 33.3 MHz, and an internal EPROM/EEPROM-based configuration memory (the Classic family uses UV-erasable or one-time-programmable cells). The device also exposes a dedicated JTAG/serial programming interface and supports in-system or device-programmer configuration via Altera's MAX+plus II legacy toolchain.
Architecturally, the EP610 implements a programmable AND/OR array feeding 16 output macrocells, each containing a sum-of-products term generator plus a configurable D/T flip-flop. This architecture delivers deterministic, fixed-pin propagation delays (no routing-dependent timing), which simplifies timing closure in legacy 5 V designs versus early FPGAs. The classic EPLD is non-volatile - configuration is retained after power-down without external configuration memory.
Typical applications include 5 V bus-interface glue logic (ISA, VME, and STD-bus address decoding), state machines for industrial control boards, peripheral chip-select generation in legacy computing platforms, parallel-port decoding, and replacement of multiple discrete 74-series TTL gates in compact through-hole designs. The PDIP-24 package is well-suited to breadboard prototyping, educational lab kits, and through-hole industrial controllers where socketed, user-replaceable logic is preferred.
When designing with this part, note that the -30 speed grade trades off roughly 50 percent of toggle frequency versus the -15 grade, so verify that 33.3 MHz toggle / 30 ns pin-to-pin delay is sufficient for the target clock domain. For modern 3.3 V or lower-voltage systems, a level translator or a current-generation MAX II / MAX V CPLD is recommended.
This page synthesizes distributor pricing, same-family and cross-family drop-in alternatives, and practical design notes not found in the original 1990s Altera datasheet, helping engineers source this legacy part reliably.
کے لیے ڈراپ اِن متبادل EP610PC30 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP610PC30 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Supply Voltage (VCC), Family, Mounting Type, Operating Temperature.
EP610PC-25
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610PC-35
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610PC-20
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610PC-15
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610LI-30
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610DC-30
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610PC30 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | EPLD (Erasable Programmable Logic Device) |
| Family | Classic EP610 |
| Macrocells | 16 |
| Usable Gates | 300 |
| Propagation Delay (tPD) | 30 ns |
| Maximum Toggle Frequency | 33.3 MHz |
| Pipelined Data Rate | Up to 100 MHz |
| Supply Voltage (VCC) | 5 V |
| Technology | CMOS |
| پیکیج | PDIP-24 |
| ماؤنٹنگ ٹائپ | Through-Hole |
| Programming | EPROM/EEPROM-based, MAX+plus II toolchain |
| RoHS اسٹیٹس | Not applicable (legacy through-hole, contains Pb per historical datasheet) |
| Logic Capacity | 16 macrocells / 300 gates equivalent |
| Configuration Memory | Non-volatile (UV-erasable or OTP variant) |
| Manufacturer (Original) | Altera Corporation (now Intel FPGA) |
| Current Distributor | Rochester Electronics, LLC |
EP610PC30 پن کنفیگریشن
| پن 1 | I/O — Macrocell I/O pin (bidirectional, configurable polarity) |
| پن 2 | I/O — Macrocell I/O pin |
| پن 3 | I/O — Macrocell I/O pin |
| پن 4 | I/O — Macrocell I/O pin |
| پن 5 | I/O — Macrocell I/O pin |
| پن 6 | I/O — Macrocell I/O pin |
| پن 7 | I/O — Macrocell I/O pin |
| پن 8 | I/O — Macrocell I/O pin |
| پن 9 | I/O — Macrocell I/O pin |
| پن 10 | I/O — Macrocell I/O pin |
| پن 11 | I/O — Macrocell I/O pin |
| پن 12 | GND — Ground |
| پن 13 | I/O — Macrocell I/O pin |
| پن 14 | I/O — Macrocell I/O pin |
| پن 15 | I/O — Macrocell I/O pin |
| پن 16 | I/O — Macrocell I/O pin |
| پن 17 | I/O — Macrocell I/O pin |
| پن 18 | I/O — Macrocell I/O pin |
| پن 19 | I/O — Macrocell I/O pin |
| پن 20 | I/O — Macrocell I/O pin |
| پن 21 | I/O — Macrocell I/O pin |
| پن 22 | I/O — Macrocell I/O pin |
| پن 23 | I/O — Macrocell I/O pin |
| پن 24 | VCC — +5V supply |
عام استعمالات
EP610PC30 کے لیے موزوں ہے 6 ایپلیکیشنs: 5V ISA/VME Bus Address Decoding, Industrial Control State Machines, Parallel-Port and Peripheral Chip-Select Generation, Legacy TTL Glue-Logic Consolidation, Educational PLD Laboratory Kits, Avionics and Military Legacy Replacement.
5V ISA/VME Bus Address Decoding
The EP610PC-30 is well-matched to legacy 5V ISA and VME bus address-decoding applications because its 16 macrocells provide sufficient sum-of-products terms for full 24-bit address decode, while the 30 ns tPD comfortably meets ISA's 8 MHz / 125 ns cycle budget with margin. The non-volatile EPROM configuration means no external boot PROM is needed, simplifying the BOM versus early FPGAs. Placed between the bus transceivers and peripheral chip-select pins, the EP610PC-30 replaces multiple 74LS138/688 decoder pairs with a single socketed device, simplifying PCB rework. Trade-off: the 5V-only supply and 30 ns speed grade make it unsuitable for 3.3V PCIe or modern MCUs.
تجویز کردہ
Industrial Control State Machines
In industrial control boards and PLC-style sequencers, the EP610PC-30's 16 macrocells each containing a D/T flip-flop make it an efficient single-chip state machine for stepper control, conveyor sequencing, and I/O scanning. The 30 ns tPD supports deterministic state transitions up to ~33 MHz, and the PDIP-24 through-hole package is socket-friendly, allowing field replacement in legacy factory equipment. Industrial designers appreciate the non-volatile configuration that survives power-down without battery backup, plus the extended-temperature -LI suffix option (EP610LI-30) for harsh environments. Trade-off: for state machines exceeding 16 states or requiring complex arithmetic, a larger MAX V CPLD is recommended.
تجویز کردہ
Parallel-Port and Peripheral Chip-Select Generation
The EP610PC-30 is ideal for generating peripheral chip-select signals in legacy parallel-port designs, PC/104 stacks, and embedded SBCs where multiple peripherals share a single bus. With 16 macrocells, designers can implement 8-16 independent chip-select decoders with strobe qualification, all in one socketed device. The 30 ns tPD easily fits within the 100-200 ns access windows of MFM/IDE hard-disk controllers and parallel-port peripherals. Placed between the address bus and peripheral CE pins, the EP610PC-30 consolidates what would otherwise require 3-4 discrete decoder ICs. Trade-off: modern USB-based peripherals do not require this glue logic.
تجویز کردہ
Legacy TTL Glue-Logic Consolidation
Designers replacing scattered 74LS/74F-series TTL gates benefit from the EP610PC-30's ability to absorb 4-6 SSI/MSI packages into one socketed PLD, reducing PCB area and improving serviceability. With 300 usable gates and 16 macrocells, a single EP610PC-30 can implement address decoding plus a few small state machines plus custom timing logic. The PDIP-24 form factor is breadboard-friendly for prototype labs and educational courses teaching PLD design with Altera's classic MAX+plus II toolchain. Trade-off: the -30 speed grade limits use in 50 MHz+ glue-logic paths; the -25 or -20 grade is preferred there.
تجویز کردہ
Educational PLD Laboratory Kits
Universities and technical colleges use the EP610PC-30 in digital-logic laboratories because its PDIP-24 through-hole package fits standard solderless breadboards and IC sockets, and its 5V supply matches common lab power rails. Students learn programmable logic fundamentals - sum-of-products, macrocell flip-flops, JTAG programming - on a part that has decades of teaching material available. The MAX+plus II legacy toolchain runs on modern Windows machines via compatibility mode, supporting coursework continuity. Trade-off: universities transitioning to FPGA-based teaching now pair the EP610PC-30 with a modern dev board for comparative labs.
تجویز کردہ
Avionics and Military Legacy Replacement
The EP610PC-30 is widely used to sustain legacy avionics, radar, and military systems where the original Altera parts were specified decades ago. Sustained by Rochester Electronics, the EP610PC-30 (and its -DM/883B MIL-STD-883 variant) provides drop-in replacement for obsolete inventory, extending the service life of fielded equipment. The 30 ns tPD and 16-macrocell architecture exactly match original specifications, eliminating the need for board re-design or re-qualification. Trade-off: for new military designs, modern radiation-hardened FPGAs are required; the EP610 is a sustainment-only part.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP610PC30 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP610PC-25 | EP610PC-35 | EP610PC-20 | EP610PC-15 | EP610LI-30 | EP610DC-30 |
|---|---|---|---|---|---|---|---|
| Brand | Altera (sustained by Rochester Electronics) | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | PDIP-24 | PDIP-24 - same | PDIP-24 - same | PDIP-24 - same | PDIP-24 - same | PDIP-24 - same | PDIP-24 (ceramic) - same footprint |
| Propagation Delay (tPD) | 30 ns | 25 ns (faster) | 35 ns (slower) | 20 ns (faster) | 15 ns (fastest) | 30 ns (same) | 30 ns (same) |
| Maximum Toggle Frequency | 33.3 MHz | ~40 MHz | ~28.5 MHz | ~50 MHz | ~66 MHz | 33.3 MHz | 33.3 MHz |
| Macrocells | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
| Usable Gates | 300 | 300 | 300 | 300 | 300 | 300 | 300 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Commercial | Industrial (-40C to +85C) | Military / Hermetic |
| Configuration Memory | EPROM (UV-erasable or OTP) | EPROM (UV-erasable or OTP) | EPROM (UV-erasable or OTP) | EPROM (UV-erasable or OTP) | EPROM (UV-erasable, ceramic window) |
اہم امتیازی خصوصیات
- 30 ns tPD is the family's mid-tier speed grade (بمقابلہEP610PC-25)
- Rochester Electronics sustains long-term availability (بمقابلہEP600PC-25)
- Commercial temperature grade suits most industrial uses (بمقابلہEP610LI-30)
- Non-volatile EPROM configuration survives power-down (بمقابلہMAX V CPLD)
ڈیزائن نوٹس
The EP610PC-30 requires a single +5V +/-10% supply on pin 24 with a 0.1 uF ceramic decoupling capacitor placed within 5 mm of the VCC pin. The device is CMOS technology but its 16 macrocells switching simultaneously at 33.3 MHz can produce transient currents up to ~50 mA, so bulk decoupling (10 uF tantalum) at the supply rail is recommended. Estimated: ICC is not explicitly stated in the public datasheet excerpt, but Classic EP610 family typical ICC at 33 MHz is 30-60 mA. Always decouple VCC to GND pin 12 with both high-frequency and bulk capacitors.
Place the EP610PC-30 in a DIP socket (e.g., 24-pin machined-pin socket) for prototyping and field serviceability - the part is through-hole and legacy systems frequently require socketed replacement. Keep trace lengths on all 16 I/O pins under 50 mm to avoid reflections; this device is designed for slow, board-level signal rates, not high-speed transmission lines. Provide a ground plane under the device to reduce switching noise on adjacent analog sections. The non-volatile EPROM configuration means no programming header footprint is required on the production PCB.
Do not assume the EP610PC-30 is pin-compatible with the EP600 family - they share the Classic EPLD heritage but have different pinouts, JTAG IDs, and programming bitstreams; substituting one for the other will fail configuration. Do not operate at VCC below 4.5 V or above 5.5 V - the EPROM read margin degrades outside this range. Do not use the EP610PC-30 in new 3.3V designs; use a modern MAX II/MAX V CPLD with level translators. When programming with MAX+plus II, always select the exact device variant (-30 speed grade) - mis-selection produces bitstreams that appear to work but have timing violations.
The EP610PC-30 in PDIP-24 has a junction-to-ambient thermal resistance (theta_JA) of approximately 60-70 C/W (estimated for plastic DIP packages of this pin count). At typical 5V / 30 mA ICC, power dissipation is ~150 mW, producing a junction temperature rise of ~10 C above ambient - well within commercial operating limits. Designers using the industrial-grade EP610LI-30 variant must still verify thermal margin in enclosed housings, as the -40C to +85C operating range does not waive thermal derating.
تعمیل کی معلومات
Original Altera EP610 family parts contain Pb in the PDIP-24 plastic package finish; not RoHS compliant per historical datasheet. Sustained by Rochester Electronics. AEC-Q100 is not applicable (legacy commercial/industrial PLD, not automotive-grade). MIL-STD-883 variants (EP610DM/883B) are available for military programs.
