ICL7117CMH+D - 3.5-Digit Dual-Slope ADC | Analog Devices
MPN: ICL7117CMH+D ✓ فعالICL7117CMH+D جائزہ
An ADC is an analog-to-digital converter, a semiconductor that samples an analog voltage and represents it as a digital code. The ICL7117 belongs to the dual-slope integrating ADC family, which uses integration and de-integration periods to average input-dependent noise and reject unwanted periodic interference. Within the broader hierarchy, it is a data-acquisition IC, an interface device between sensors or measurement circuits and digital control or display electronics.
The ICL7117CMH+D provides a 3.5-digit conversion result and includes display-hold functionality. Its 44-pin surface-mount package supports the analog inputs, reference connections, timing components, digital interface, and display-related functions required by a complete measurement instrument. The commercial temperature grade suits controlled industrial, laboratory, and instrumentation environments where extended-temperature qualification is not required.
Its dual-slope architecture is particularly useful when the target signal is relatively slow and the environment contains mains-frequency or other periodic interference. Integrating both signal and reference over controlled intervals can improve rejection of fixed-frequency noise while supporting a straightforward external reference and timing network. The exact conversion time, input bandwidth, linearity, and reference requirements must be taken from the manufacturer datasheet for the final front-end design.
Typical implementations include digital panel meters, laboratory instruments, temperature measurement systems, process-monitoring equipment, weighing instruments, and embedded measurement panels. The display-hold feature allows a reading to remain on the display while a new measurement is acquired, which is useful when operators need to inspect stable values between updates.
PCB implementation should preserve clean analog signal paths and separate the analog input and reference nodes from digital switching activity. Use a short, shielded route for the measured input, maintain a stable reference arrangement, and place timing and filter components close to the device pins. Component values and grounding topology should follow the manufacturer’s reference circuit to avoid degrading conversion accuracy or noise rejection.
This page combines the manufacturer-classified converter architecture, package and temperature-grade attributes, practical application guidance, related MPNs, and a structured comparison of verified drop-in variants. It is intended to help engineers locate the datasheet, understand the 44-pin footprint, assess replacement options, and plan an instrument-grade measurement board.
کے لیے ڈراپ اِن متبادل ICL7117CMH+D — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ICL7117CMH+D (یکساں فارم فیکٹر اور فٹ پرنٹ).
ICL7117CMH+
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ICL7117CMH+TD
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ICL7117CMH+D زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ADC Resolution | 3.5 digits |
| Conversion Architecture | Dual-slope |
| Display Hold Function | Yes |
| Package Type | 44-pin MQFP, gull wing |
| Package Dimensions | 10 mm x 10 mm |
| Terminal Count | 44 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
| Temperature Grade | Commercial |
| Device Category | ADCs/DACs - Special Purpose |
ICL7117CMH+D 10 mm x 10 mm پن کنفیگریشن گائیڈ
ICL7117CMH+D (10 mm x 10 mm پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ICL7117CMH+D.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ICL7117CMH+D کے لیے موزوں ہے 6 ایپلیکیشنs: Digital Panel Meters, Laboratory Measurement Instruments, Temperature Measurement Systems, Process Monitoring Equipment, Weighing and Load Measurement, Test and Measurement Readouts.
Digital Panel Meters
The ICL7117CMH+D fits digital panel meters because it combines a 3.5-digit conversion result with display-hold functionality in a 44-pin MQFP package. It can serve as the measurement front end for voltage, current, temperature, or resistance displays. The dual-slope conversion method is well suited to slowly changing panel-meter inputs and helps average periodic interference. The instrument designer must scale the input to the converter’s supported range and implement the manufacturer’s reference, timing, and display interface. Display hold allows an operator to examine a captured value while the instrument continues its measurement cycle, reducing the need for additional external latch logic.
تجویز کردہ
Laboratory Measurement Instruments
The ICL7117CMH+D is appropriate for laboratory instruments that display a measured value with moderate numeric resolution. Its 3.5-digit dual-slope ADC can form the central measurement channel in bench meters, counters, calibrators, and general-purpose data-acquisition panels. The architecture is advantageous when measurement speed is less important than stable readings and rejection of fixed-frequency interference. Designers should use the manufacturer application circuit for timing and reference components, and they should isolate sensitive analog inputs from display and switching circuitry to preserve the useful accuracy of the conversion result.
تجویز کردہ
Temperature Measurement Systems
The ICL7117CMH+D can be used in temperature measurement systems that require a stable numeric result rather than high-speed sampling. A bridge or sensor signal is conditioned, referenced, and presented to the converter, while the 3.5-digit result supports readable panel or controller displays. The display-hold function is useful for maintenance personnel who need to inspect a captured temperature. Proper grounding, input protection, reference stability, and calibration determine system accuracy, so the converter should be implemented with the exact component values and layout shown in the manufacturer’s reference circuit.
تجویز کردہ
Process Monitoring Equipment
The ICL7117CMH+D is suitable for industrial process monitoring where a process variable changes slowly enough for integrating conversion. Examples include pressure indication, flow-total displays, tank-level monitoring, and production-line check stations. The dual-slope ADC can average the input and suppress periodic interference commonly encountered in industrial environments, while display hold provides an operator-visible snapshot during inspection. The design must include suitable input conditioning and isolation, especially when the monitored signal is referenced to noisy equipment grounds. Confirm operating limits, package thermal performance, and lifecycle status for each production configuration.
تجویز کردہ
Weighing and Load Measurement
The ICL7117CMH+D can form the conversion channel of a compact weighing instrument because a 3.5-digit result is useful for basic load displays and process thresholds. The slow response of a dual-slope converter matches a mechanically damped load cell, where rapid sampling is generally unnecessary. Display hold allows a settled reading to remain visible during tare or inspection operations. In a practical scale, the load-cell signal requires low-noise amplification and careful reference design; those external analog functions strongly affect the final resolution. Calibration, grounding, shielding, and input filtering should therefore be treated as part of the converter implementation.
تجویز کردہ
Test and Measurement Readouts
The ICL7117CMH+D is appropriate for compact test and measurement equipment that must present a numeric result to an operator. It can support resistance, voltage, current, or ratio measurements when the input is conditioned to the converter’s range. The display-hold function helps preserve a test value while the equipment changes ranges or prepares for the next measurement. Because the converter has 44 terminals, the design should follow the manufacturer pin-description table exactly and provide adequate clearance around the 10 mm by 10 mm gull-wing package. Use a stable reference and short analog routing to avoid introducing errors larger than the useful conversion resolution.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ICL7117CMH+D — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ICL7117CMH+ | ICL7117CMH+TD |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 44-pin MQFP, gull wing | 44-pin MQFP, gull wing | 44-pin MQFP, gull wing |
| Resolution | 3.5 digits | 3.5 digits | 3.5 digits |
| Conversion Architecture | Dual-slope | Dual-slope | Dual-slope |
| Display Hold | Yes | Yes | Yes |
| Terminal Count | 44 pins | 44 pins | 44 pins |
| Package Dimensions | 10 mm x 10 mm | 10 mm x 10 mm | 10 mm x 10 mm |
| Ordering Designation | ICL7117CMH+D | ICL7117CMH+ | ICL7117CMH+TD |
اہم امتیازی خصوصیات
- Dedicated display-hold function (بمقابلہICL7107CMH+D)
- Exact +D ordering designation (بمقابلہICL7117CMH+)
- Verified package compatibility (بمقابلہICL7117CMH+TD)
ڈیزائن نوٹس
Route the analog input and reference nets as short, quiet traces and keep them away from display-output and digital timing paths. Place the timing, reference, and filtering components close to their associated ICL7117CMH+D pins to minimize parasitic pickup. The 44-pin gull-wing footprint requires careful fan-out around the 10 mm by 10 mm package, so check courtyard clearance, solder mask, and exposed pad or lead requirements against the package drawing before release.
The dual-slope architecture is best suited to slowly changing inputs, and the analog front end must present a stable signal to the converter. Use the manufacturer’s recommended input and reference network, maintain consistent grounding between the measurement source and ADC, and avoid routing the measurement trace parallel to noisy switching nodes. Any low-pass filtering should be calculated against the required measurement bandwidth because excessive filtering may slow the displayed result.
Do not assign the 44 terminals from memory or by copying a similar ICL7107 schematic. Use the ICL7117CMH+D pin-description table and application circuit because hold, display, analog, reference, timing, and supply functions must be connected according to the exact device. Also verify the +D ordering designation, packing method, commercial temperature grade, and manufacturer lifecycle status before releasing a BOM or placing a production order.
Keep the converter supply rails and analog reference arrangement stable because reference variation can directly affect the displayed code. Decouple supply pins at the device using the capacitance and placement specified by the manufacturer, and avoid sharing noisy return paths with display or switching circuitry. Confirm the actual supply and reference limits from the datasheet before adding external protection or bias circuitry; those values were not used as substitutes in this guide.
تعمیل کی معلومات
The device is a commercial-grade measurement IC rather than an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer documentation.