Analog Devices

ICL7117CMH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

부품 번호: ICL7117CMH+D ✓ 활성
44-pin MQFP, gull wing Package
MOQ: 1 |

ICL7117CMH+D 개요

Analog Devices ICL7117CMH+D is a 3.5-digit dual-slope analog-to-digital converter with display hold, supplied in a 44-pin gull-wing MQFP package measuring 10 mm by 10 mm. The converter is classified as a commercial-temperature component and is intended for precision measurement systems that convert an analog input into a digital value suitable for processing or display.

An ADC is an analog-to-digital converter, a semiconductor that samples an analog voltage and represents it as a digital code. The ICL7117 belongs to the dual-slope integrating ADC family, which uses integration and de-integration periods to average input-dependent noise and reject unwanted periodic interference. Within the broader hierarchy, it is a data-acquisition IC, an interface device between sensors or measurement circuits and digital control or display electronics.

The ICL7117CMH+D provides a 3.5-digit conversion result and includes display-hold functionality. Its 44-pin surface-mount package supports the analog inputs, reference connections, timing components, digital interface, and display-related functions required by a complete measurement instrument. The commercial temperature grade suits controlled industrial, laboratory, and instrumentation environments where extended-temperature qualification is not required.

Its dual-slope architecture is particularly useful when the target signal is relatively slow and the environment contains mains-frequency or other periodic interference. Integrating both signal and reference over controlled intervals can improve rejection of fixed-frequency noise while supporting a straightforward external reference and timing network. The exact conversion time, input bandwidth, linearity, and reference requirements must be taken from the manufacturer datasheet for the final front-end design.

Typical implementations include digital panel meters, laboratory instruments, temperature measurement systems, process-monitoring equipment, weighing instruments, and embedded measurement panels. The display-hold feature allows a reading to remain on the display while a new measurement is acquired, which is useful when operators need to inspect stable values between updates.

PCB implementation should preserve clean analog signal paths and separate the analog input and reference nodes from digital switching activity. Use a short, shielded route for the measured input, maintain a stable reference arrangement, and place timing and filter components close to the device pins. Component values and grounding topology should follow the manufacturer’s reference circuit to avoid degrading conversion accuracy or noise rejection.

This page combines the manufacturer-classified converter architecture, package and temperature-grade attributes, practical application guidance, related MPNs, and a structured comparison of verified drop-in variants. It is intended to help engineers locate the datasheet, understand the 44-pin footprint, assess replacement options, and plan an instrument-grade measurement board.

드롭인 대체품: ICL7117CMH+D — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ICL7117CMH+D (동일 폼 팩터 및 풋프린트).

ICL7117CMH+

✅ 드롭인
📦 44-pin MQFP, gull wing
Verified function and package match are 100% for 3.5-digit dual-slope conversion and 44-pin MQFP compatibility; ordering suffix and grade details require final confirmation.

📋 참조 대체품 (카탈로그에 없음)

ICL7117CMH+TD

✅ 드롭인
📦 44-pin MQFP, gull wing
Verified function and package match are 100% for 3.5-digit dual-slope conversion and 44-pin MQFP compatibility; TD grade and packing designation require final confirmation.

📋 참조 대체품 (카탈로그에 없음)

ICL7117CMH+D 최대 정격 & 전기적 특성

ADC Resolution 3.5 digits
Conversion Architecture Dual-slope
Display Hold Function Yes
Package Type 44-pin MQFP, gull wing
Package Dimensions 10 mm x 10 mm
Terminal Count 44 pins
실장 유형 Surface mount
Temperature Grade Commercial
Device Category ADCs/DACs - Special Purpose

ICL7117CMH+D 10 mm x 10 mm 핀 구성 가이드

ICL7117CMH+D(10 mm x 10 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

ICL7117CMH+D의 10 mm x 10 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ICL7117CMH+D.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ICL7117CMH+D 적합 용도: 6 애플리케이션s: Digital Panel Meters, Laboratory Measurement Instruments, Temperature Measurement Systems, Process Monitoring Equipment, Weighing and Load Measurement, Test and Measurement Readouts.

📺

Digital Panel Meters

The ICL7117CMH+D fits digital panel meters because it combines a 3.5-digit conversion result with display-hold functionality in a 44-pin MQFP package. It can serve as the measurement front end for voltage, current, temperature, or resistance displays. The dual-slope conversion method is well suited to slowly changing panel-meter inputs and helps average periodic interference. The instrument designer must scale the input to the converter’s supported range and implement the manufacturer’s reference, timing, and display interface. Display hold allows an operator to examine a captured value while the instrument continues its measurement cycle, reducing the need for additional external latch logic.

🔧

Laboratory Measurement Instruments

The ICL7117CMH+D is appropriate for laboratory instruments that display a measured value with moderate numeric resolution. Its 3.5-digit dual-slope ADC can form the central measurement channel in bench meters, counters, calibrators, and general-purpose data-acquisition panels. The architecture is advantageous when measurement speed is less important than stable readings and rejection of fixed-frequency interference. Designers should use the manufacturer application circuit for timing and reference components, and they should isolate sensitive analog inputs from display and switching circuitry to preserve the useful accuracy of the conversion result.

🌡️

Temperature Measurement Systems

The ICL7117CMH+D can be used in temperature measurement systems that require a stable numeric result rather than high-speed sampling. A bridge or sensor signal is conditioned, referenced, and presented to the converter, while the 3.5-digit result supports readable panel or controller displays. The display-hold function is useful for maintenance personnel who need to inspect a captured temperature. Proper grounding, input protection, reference stability, and calibration determine system accuracy, so the converter should be implemented with the exact component values and layout shown in the manufacturer’s reference circuit.

🏭

Process Monitoring Equipment

The ICL7117CMH+D is suitable for industrial process monitoring where a process variable changes slowly enough for integrating conversion. Examples include pressure indication, flow-total displays, tank-level monitoring, and production-line check stations. The dual-slope ADC can average the input and suppress periodic interference commonly encountered in industrial environments, while display hold provides an operator-visible snapshot during inspection. The design must include suitable input conditioning and isolation, especially when the monitored signal is referenced to noisy equipment grounds. Confirm operating limits, package thermal performance, and lifecycle status for each production configuration.

⚖️

Weighing and Load Measurement

The ICL7117CMH+D can form the conversion channel of a compact weighing instrument because a 3.5-digit result is useful for basic load displays and process thresholds. The slow response of a dual-slope converter matches a mechanically damped load cell, where rapid sampling is generally unnecessary. Display hold allows a settled reading to remain visible during tare or inspection operations. In a practical scale, the load-cell signal requires low-noise amplification and careful reference design; those external analog functions strongly affect the final resolution. Calibration, grounding, shielding, and input filtering should therefore be treated as part of the converter implementation.

🖥️

Test and Measurement Readouts

The ICL7117CMH+D is appropriate for compact test and measurement equipment that must present a numeric result to an operator. It can support resistance, voltage, current, or ratio measurements when the input is conditioned to the converter’s range. The display-hold function helps preserve a test value while the equipment changes ranges or prepares for the next measurement. Because the converter has 44 terminals, the design should follow the manufacturer pin-description table exactly and provide adequate clearance around the 10 mm by 10 mm gull-wing package. Use a stable reference and short analog routing to avoid introducing errors larger than the useful conversion resolution.

추천 제품 요약

ICL7117CMH+D Analog Devices 사용처: Digital Panel Meters, Laboratory Measurement Instruments, Temperature Measurement Systems, Process Monitoring Equipment, Weighing and Load Measurement, Test and Measurement Readouts ICL7117CMH+ Closely related 3.5-digit converter 사용처: Digital Panel Meters, Temperature Measurement Systems, Weighing and Load Measurement ICL7107CMH+D Related Maxim dual-slope ADC family member 사용처: Laboratory Measurement Instruments, Test and Measurement Readouts ICL7117CMH+TD Related same-family ordering option 사용처: Process Monitoring Equipment
What is the ICL7117CMH+D?
The ICL7117CMH+D is a 3.5-digit dual-slope analog-to-digital converter with display hold from Maxim Integrated, now part of Analog Devices. It is packaged in a 44-pin gull-wing MQFP measuring 10 mm by 10 mm and is classified as a commercial-temperature component. According to the Maxim Integrated datasheet, its dual-slope architecture is intended for precision measurement and display applications.
What are the key specifications of ICL7117CMH+D that engineers should know?
The ICL7117CMH+D is a 3.5-digit, dual-slope ADC with display hold in a 44-pin MQFP package. The package uses gull-wing terminals and measures 10 mm by 10 mm, while the device is assigned a commercial temperature grade. Maxim Integrated classifies it under ADCs/DACs for special-purpose data-acquisition applications. The datasheet remains the controlling reference for supply voltage, conversion timing, reference voltage, input range, and accuracy.
Is ICL7117CMH+D a drop-in replacement for ICL7117CMH+?
The ICL7117CMH+ is the closest same-family option identified for the ICL7117CMH+D because both use the same 3.5-digit dual-slope converter and 44-pin package. The verified listing attributes do not expose enough electrical detail to confirm every timing, temperature, and lifecycle condition, so a production substitution still requires comparison against the manufacturer datasheet. The +D designation also requires checking the original equipment manufacturer’s approved ordering and packing codes.
What can replace ICL7117CMH+D?
The ICL7117CMH+ is the principal verified same-family replacement candidate for the ICL7117CMH+D, with the same 3.5-digit dual-slope function and 44-pin MQFP package. The ICL7117CMH+TD is another closely related ordering variant. No cross-brand part was confirmed as pin-for-pin drop-in compatible from the available cross-reference results, so board-level qualification remains necessary before substituting any candidate.
Is ICL7117CMH+D the same as ICL7117CMH+?
The ICL7117CMH+D and ICL7117CMH+ identify closely related versions of the same 3.5-digit dual-slope ADC family in a 44-pin MQFP package. They should not automatically be treated as identical without checking temperature grade, packing method, marking, and current manufacturer ordering status. The verified product records support their use as same-family drop-in candidates, while the manufacturer datasheet and approved-parts documentation remain authoritative for production use.
Where can I download the ICL7117CMH+D datasheet PDF?
The ICL7117CMH+D datasheet is accessible through the Maxim Integrated document listing linked on this page. The listing identifies the device as a 3.5-digit ADC with display hold and provides access to the manufacturer document, circuit details, and pin information. Before releasing a PCB or production order, use the document’s pin-description table, recommended application circuit, operating limits, and ordering information together with the exact ICL7117CMH+D marking.
Where can I find the ICL7117CMH+D pinout?
The ICL7117CMH+D pinout must be taken from the pin-description table in the Maxim Integrated datasheet because the component has 44 gull-wing MQFP terminals. Assign each signal from that table rather than inferring connections from a similar dual-slope ADC. Pay particular attention to analog inputs, reference pins, timing components, supply connections, ground pins, display outputs, and control signals when laying out the 10 mm by 10 mm footprint.
Where can I buy ICL7117CMH+D online?
Use the Request a Quote form on this page to request ICL7117CMH+D availability, current lead time, and a quotation for the required quantity. The form allows the request to be tied to the exact 44-pin MQFP ordering code rather than a family-level or differently packed part. Confirm authorized manufacturing traceability, condition, lot information, and any required date-code or marking controls before placing the order.
What is the price of ICL7117CMH+D?
Current pricing for the exact ICL7117CMH+D is generated through the Request a Quote form on this page. A quotation request should specify quantity, target date, acceptable package condition, and any required traceability documentation. This approach also allows the order to be checked against the exact +D ordering code, preventing confusion with related ICL7117 variants that may use different packing or temperature designations.
What is the lead time for ICL7117CMH+D?
The current lead time for ICL7117CMH+D should be requested through the Request a Quote form on this page. Include your required quantity, scheduled build date, and acceptable packaging or traceability conditions in the request. Because related ICL7117 ordering codes can differ in packing or grade, confirm that the proposed supply is specifically ICL7117CMH+D and that its manufacturer labeling matches the component approved for the assembly.
Is ICL7117CMH+D in stock?
Stock status for ICL7117CMH+D should be confirmed through the Request a Quote form on this page. Submit the required quantity and target date so the response can reflect the exact +D ordering code and current supply conditions. For production planning, request lot traceability and lifecycle confirmation as well, since inventory status alone does not establish qualification, date code, or counterfeit-risk controls.
When should I choose ICL7117CMH+D over ICL7117CMH+?
Choose ICL7117CMH+D when the approved BOM, marking, packing method, and ordering suffix specifically call for that part. Choose ICL7117CMH+ only when its manufacturer documentation confirms equivalent electrical behavior, temperature grade, lifecycle status, and mechanical compatibility for the assembled product. The two parts share the core 3.5-digit dual-slope function and 44-pin MQFP format, but ordering suffixes can carry procurement or manufacturing meaning.
Is ICL7117CMH+D suitable for a digital panel meter?
The ICL7117CMH+D is suitable for a digital panel meter that benefits from a dedicated 3.5-digit conversion and display-hold capability. Its dual-slope architecture is appropriate for relatively slow measurements where averaging and rejection of periodic interference are useful. The panel-meter design must still establish the input range, reference voltage, supply rails, timing network, display interface, and protection network from the manufacturer datasheet.
How does ICL7117CMH+D compare with ICL7117CMH+TD?
ICL7117CMH+D and ICL7117CMH+TD are closely related 3.5-digit dual-slope converter ordering variants in the same 44-pin MQFP family. The available records confirm the shared function and package but do not provide a complete quantified comparison of temperature grade, packing, or lifecycle. Review the exact ordering code, grade, packing suffix, and manufacturer status before treating either part as a drop-in replacement for the other.
What is the best cross-brand equivalent for ICL7117CMH+D?
No cross-brand equivalent is confirmed as a drop-in replacement for the ICL7117CMH+D from the verified cross-reference results. A valid substitute must match the 44-pin pinout, dual-slope conversion behavior, input and reference ranges, timing requirements, supply voltage, display interface, and temperature grade. Use the Request a Quote form for sourcing support, and require a manufacturer-approved cross-reference or engineering review before changing brands.

엔지니어링 참조 데이터: ICL7117CMH+D — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ICL7117CMH+D when the approved design specifies the +D ordering code and requires a 3.5-digit dual-slope ADC with display hold in a 44-pin MQFP. ICL7117CMH+ is the closest same-family drop-in candidate when its ordering suffix, temperature grade, packing, and lifecycle status are approved for the application. ICL7117CMH+TD is another related candidate with the same verified converter function and 44-pin package, but its TD grade and packing requirements must be checked. The ICL7107CMH+D belongs to a related Maxim converter family and may be considered only after its pinout, display-drive behavior, and electrical limits have been compared; it is not presented as a confirmed drop-in replacement. No cross-brand replacement was confirmed. For production use, verify the manufacturer datasheet, approved-parts status, pin table, lifecycle statement, and exact ordering code before releasing the design to procurement.

대체품과의 비교

파라미터 이 제품 ICL7117CMH+ ICL7117CMH+TD
Brand Analog Devices Analog Devices Analog Devices
Package 44-pin MQFP, gull wing 44-pin MQFP, gull wing 44-pin MQFP, gull wing
Resolution 3.5 digits 3.5 digits 3.5 digits
Conversion Architecture Dual-slope Dual-slope Dual-slope
Display Hold Yes Yes Yes
Terminal Count 44 pins 44 pins 44 pins
Package Dimensions 10 mm x 10 mm 10 mm x 10 mm 10 mm x 10 mm
Ordering Designation ICL7117CMH+D ICL7117CMH+ ICL7117CMH+TD

주요 차별점

  • Dedicated display-hold function (vs ICL7107CMH+D)
  • Exact +D ordering designation (vs ICL7117CMH+)
  • Verified package compatibility (vs ICL7117CMH+TD)

설계 노트

Route the analog input and reference nets as short, quiet traces and keep them away from display-output and digital timing paths. Place the timing, reference, and filtering components close to their associated ICL7117CMH+D pins to minimize parasitic pickup. The 44-pin gull-wing footprint requires careful fan-out around the 10 mm by 10 mm package, so check courtyard clearance, solder mask, and exposed pad or lead requirements against the package drawing before release.

The dual-slope architecture is best suited to slowly changing inputs, and the analog front end must present a stable signal to the converter. Use the manufacturer’s recommended input and reference network, maintain consistent grounding between the measurement source and ADC, and avoid routing the measurement trace parallel to noisy switching nodes. Any low-pass filtering should be calculated against the required measurement bandwidth because excessive filtering may slow the displayed result.

Do not assign the 44 terminals from memory or by copying a similar ICL7107 schematic. Use the ICL7117CMH+D pin-description table and application circuit because hold, display, analog, reference, timing, and supply functions must be connected according to the exact device. Also verify the +D ordering designation, packing method, commercial temperature grade, and manufacturer lifecycle status before releasing a BOM or placing a production order.

Keep the converter supply rails and analog reference arrangement stable because reference variation can directly affect the displayed code. Decouple supply pins at the device using the capacitance and placement specified by the manufacturer, and avoid sharing noisy return paths with display or switching circuitry. Confirm the actual supply and reference limits from the datasheet before adding external protection or bias circuitry; those values were not used as substitutes in this guide.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The device is a commercial-grade measurement IC rather than an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer documentation.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ICL7117CMH+D datasheet ICL7117CMH+D specifications ICL7117CMH+D pinout ICL7117CMH+D datasheet pdf ICL7117CMH+D equivalent ICL7117CMH+D replacement ICL7117CMH+D cross reference ICL7117CMH+D vs ICL7117CMH+ ICL7117CMH+D 44 pin MQFP ICL7117CMH+D price ICL7117CMH+D stock Analog Devices ICL7117CMH+D ICL7117 3.5 digit dual slope ADC ICL7117CMH+D digital panel meter ICL7117CMH+D application circuit

관련 부품 & 용어

Analog Devices Maxim Integrated ICL7117CMH+D ICL7117CMH+ ICL7117CMH+TD ICL7107CMH+D ICL7117CM44 analog-to-digital converter ADC dual-slope ADC integrating ADC data acquisition IC 3.5-digit resolution display hold 44-pin MQFP gull-wing package surface-mount package QFP package family digital panel meter laboratory measurement temperature measurement process monitoring reference voltage display interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기