Renesas Electronics

ICS580M-01 270MHz 2:2 Clock Multiplexer | Renesas Electronics

MPN: ICS580M-01 ✗ اختتامِ زندگی
2.5 V to 5.5 V Vdss 16-SOIC, 0.154 inch / 3.90 mm width Package 270 MHz Speed
MOQ: 1 |

ICS580M-01 جائزہ

Renesas Electronics ICS580M-01 is a 2:2 zero-delay clock multiplexer and buffer designed for glitch-free switching between two clock sources. It supports clock frequencies up to 270 MHz, operates from a 2.5 V to 5.5 V supply, and is packaged in a 16-SOIC configuration measuring 0.154 inches, or 3.90 mm, in width. The device provides two clock outputs and a control input for selecting the active clock path.

A clock multiplexer is a timing-device category used to route one of two clock signals toward a downstream circuit while minimizing switching disturbances. This device combines clock selection with zero-delay buffer behavior, making it useful where a system must change clock sources without producing the short pulses or unwanted transitions that can disrupt digital logic, serializers, processors, and communication equipment.

The main operating characteristics are a maximum clock frequency of 270 MHz, a 2.5 V to 5.5 V supply-voltage range, and a 16-SOIC package. The 2:2 arrangement allows one selected clock to be distributed to two outputs, reducing the need for separate buffer devices when the same selected clock must reach more than one destination.

ICS580M-01 is intended for clock-distribution, clock-switching, and digital-system applications where clean transitions and controlled source selection are important. The zero-delay-buffer function is particularly relevant in systems where the multiplexer must present a predictable clock relationship to downstream circuitry. The exact input and output timing behavior should be confirmed from the manufacturer datasheet before using the device in a new design.

A typical implementation places the device between two candidate clock sources and the logic that requires a stable clock. The select control is driven by the system controller, while the two outputs are connected to the appropriate destination circuits. Designers should account for supply decoupling, controlled select transitions, trace impedance, and the relationship between the selected clock and surrounding circuitry.

For new layouts, place the device close to the clock source and the load being switched, route clock traces as controlled-impedance transmission lines where required, and keep the select control away from sensitive clock nodes. Verify the device’s operating limits, pin functions, and timing requirements in the manufacturer datasheet before production release.

This product page combines the manufacturer-aligned specifications, package information, sourcing structure, application guidance, and drop-in comparison information for ICS580M-01. It is intended to help engineers assess clock-multiplexer functionality and PCB reuse before completing a production design.

کے لیے ڈراپ اِن متبادل ICS580M-01 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

ICS580M-01I

✅ ڈراپ-اِن
📦 16-SOIC
Related 16-SOIC ordering variant; the indexed cross-reference reports consistent terminal and package characteristics, with no quantified electrical difference stated

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ICS580M-01LF

✅ ڈراپ-اِن
📦 16-SOIC
Same 16-SOIC package and consistent terminals; the indexed comparison identifies equivalent functional characteristics without a quantified electrical difference

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ICS580M-01ILF

✅ ڈراپ-اِن
📦 16-SOIC
Related 16-SOIC ordering variant; the indexed comparison reports consistent package and terminal characteristics, with no quantified electrical difference stated

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

580M-01LF

✅ ڈراپ-اِن
📦 16-SOIC
Same 16-SOIC package and consistent terminals; the indexed comparison identifies equivalent functional characteristics without a quantified electrical difference

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

580M-01L

✅ ڈراپ-اِن
📦 16-SOIC
Related 16-SOIC ordering variant; the indexed comparison reports consistent package and terminal characteristics, with no quantified electrical difference stated

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ICS580M-01 تفصیلات

Product Type Clock Multiplexer, Zero Delay Buffer IC
Multiplexer Configuration 2:2
Maximum Frequency 270 MHz
Supply Voltage Range 2.5 V to 5.5 V
Input Signal Clock
Output Signal Clock
آؤٹ پٹس کی تعداد 2
پیکیج 16-SOIC, 0.154 inch / 3.90 mm width
Switching Behavior Glitch-free switching between two clock sources
ماؤنٹنگ ٹائپ Surface Mount
پنز کی تعداد 16 pins

ICS580M-01 16-soic, 0.154 inch / 3.90 mm width پن کنفیگریشن گائیڈ

ICS580M-01 (16-soic, 0.154 inch / 3.90 mm width پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ICS580M-01 کے لیے 16-soic, 0.154 inch / 3.90 mm width پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ICS580M-01.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ICS580M-01 کے لیے موزوں ہے 6 ایپلیکیشنs: Dual-source clock selection, Processor clock-source failover, Telecommunications clock distribution, Network interface clock routing, Industrial data-acquisition timing, FPGA logic clocking.

🌐

Dual-source clock selection

The ICS580M-01 fits dual-source clock-selection systems that must route one of two incoming clocks to two downstream destinations without generating narrow unwanted pulses during a source change. Its 2:2 configuration reduces the number of separate selection and fan-out functions in a timing chain. The device operates from 2.5 V to 5.5 V and supports clocks up to 270 MHz, making it relevant to high-speed digital logic requiring controlled source transitions. Layout should keep clock paths short, preserve intended impedance, and place supply bypassing close to the device. The select-control signal must meet the timing requirements in the manufacturer datasheet, while receiver loading and trace length should be reviewed to ensure that the selected clock reaches downstream circuits with acceptable edge quality.

🖥️

Processor clock-source failover

ICS580M-01 can support a processor clock-source failover arrangement where two candidate clock sources are present but only one should drive the active timing path at a time. Its zero-delay-buffer function and two-output architecture allow the selected clock to reach two destinations while avoiding the glitches or short pulses associated with ordinary gate-based switching. Operation to 270 MHz supports demanding processor-interface timing, subject to the complete system budget. Engineers should verify processor clock-input tolerance, input-to-output timing, supply sequencing, and the maximum transition rate of the control signal. Short, properly referenced clock traces and local decoupling help preserve signal integrity during repeated source changes.

🌐

Telecommunications clock distribution

The ICS580M-01 is appropriate for telecommunications equipment that selects between two clock domains and distributes the chosen signal to two functional blocks. Its 2:2 topology, 270 MHz maximum frequency, and 2.5 V to 5.5 V supply range fit timing systems requiring compact source selection close to active logic. The switching function is specified to avoid glitches and short pulses, helping protect downstream state machines and high-speed interfaces. In a production layout, use controlled-impedance routing for high-frequency clock nets, minimize stubs, and keep the select trace away from sensitive clock paths. Confirm the exact timing and output-load limits from the manufacturer datasheet before release.

🌐

Network interface clock routing

ICS580M-01 can route one of two clocks toward network-interface circuitry while driving two output loads from the selected source. The device’s 270 MHz capability is useful in high-speed communication systems where fabric, serializer, or interface timing must remain stable during source changes. A dedicated multiplexer is preferable to ordinary logic gating when narrow pulses could be interpreted as valid clock edges and cause data errors. Place the ICS580M-01 near the clock-consuming circuitry, use short return paths and solid ground references, and avoid routing the select control adjacent to clock inputs. Validate input slew rate, output loading, and source-switch timing against the complete interface specification.

🏭

Industrial data-acquisition timing

ICS580M-01 suits industrial data-acquisition systems that need to choose between two clocks for sampling, conversion, or control logic. The 2:2 output arrangement can distribute the selected clock to two acquisition-related blocks, while the specified glitch-free switching helps maintain deterministic control of sampling boundaries. Its 2.5 V to 5.5 V supply range supports integration with conventional digital voltage rails used in industrial equipment. Engineers should consider clock-jitter budget, maximum frequency, output loading, and the timing relationship between the select command and acquisition triggers. The device should be positioned close to the timing-consuming circuits, with local supply bypassing and controlled clock routing to reduce susceptibility to board-level noise.

🧩

FPGA logic clocking

ICS580M-01 can provide source selection for FPGA-based systems that use two clocks and require the selected clock to reach two internal or external destinations. The 270 MHz maximum frequency makes the part relevant to moderately high-speed FPGA interfaces, while the zero-delay-buffer function avoids adding ordinary logic-gate pulse distortion at the selection stage. In a practical design, analyze the complete clocking architecture, including PLL outputs, fabric timing constraints, external clock-input tolerance, and any clock-gating requirements. Keep the device and output traces close to the receiving FPGA or buffer, maintain a continuous ground reference, and use the select control only when its timing satisfies the system’s switching sequence.

What is the operating voltage of ICS580M-01?
The ICS580M-01 operates from 2.5 V to 5.5 V according to the manufacturer specifications for this clock multiplexer. The device is designed for clock selection and zero-delay buffering in systems using compatible clock signals. The 2.5 V minimum and 5.5 V maximum values should be used when planning the supply rail, decoupling capacitors, and logic-level compatibility with surrounding digital circuitry.
What is the maximum clock frequency of ICS580M-01?
The ICS580M-01 supports clock frequencies up to 270 MHz, as stated in the Renesas Electronics component specifications. This makes it suitable for high-speed digital clock routing where two possible clock sources must be selected for downstream circuitry. The actual operating frequency should remain within the device limits and should be validated against the complete system timing budget.
What type of device is ICS580M-01?
The ICS580M-01 is a 2:2 clock multiplexer and zero-delay buffer IC with a 16-SOIC package. It switches between two clock sources and provides two clock outputs, allowing a selected clock to be distributed to more than one destination. The manufacturer describes the switching function as producing no glitches or short pulses during source changes.
Can ICS580M-01 switch between two clock sources without glitches?
Yes. The ICS580M-01 is designed to switch between two clock sources with no glitches or short pulses, according to the device description. This characteristic is useful when changing clock sources in digital systems where narrow unwanted pulses could cause incorrect state transitions, data corruption, or synchronization errors. The select-control timing should still be designed according to the manufacturer datasheet.
Where can I download the ICS580M-01 datasheet PDF?
The ICS580M-01 datasheet can be accessed through the official Renesas Electronics product documentation or the datasheet links listed for this part. The indexed manufacturer part listing identifies ICS580M-01 as a Renesas Electronics 2:2, 270 MHz, 16-SOIC clock multiplexer. Use the manufacturer datasheet for the authoritative pin description, timing characteristics, recommended application circuit, and package details.
Where can I find the ICS580M-01 pinout?
The ICS580M-01 uses a 16-SOIC package, and its authoritative pin assignment is found in the manufacturer datasheet under the pin-description and package-outline sections. The public product information confirms the 16-SOIC configuration but does not reproduce every pin name in a verified way. Use the datasheet pin table when assigning PCB nets, especially for supply, ground, clock inputs, clock outputs, and select control.
What is the difference between ICS580M-01 and ICS580M-01I?
The indexed product information identifies both ICS580M-01 and ICS580M-01I as related 16-SOIC clock-multiplexer variants, with the manufacturer listing describing the target device as a 2:2, 270 MHz unit. The available comparison information indicates consistent package and terminal compatibility, but it does not establish every electrical or temperature-grade distinction. Verify the exact ordering code in the manufacturer datasheet before production substitution.
Is ICS580M-01 compatible with ICS580M-01LF for replacement?
The cross-reference information identifies ICS580M-01LF as a replacement candidate with the same 16-SOIC package and consistent terminals and functional characteristics. The listed comparison describes the replacement as requiring no modification to the existing circuit. Production use should still confirm the electrical limits, temperature grade, lifecycle status, and ordering suffix against the manufacturer documentation.
What is the best drop-in replacement for ICS580M-01?
ICS580M-01LF is the closest listed drop-in candidate because the cross-reference information reports the same 16-SOIC package, consistent terminals, and equivalent functional characteristics. Other related listings include ICS580M-01I, ICS580M-01ILF, 580M-01LF, and 580M-01L. The final choice should be validated against frequency, supply voltage, timing, temperature, and qualification requirements.
Can ICS580M-01 be used in a clock-distribution system?
The ICS580M-01 is suited to clock-distribution systems because it selects between two clock inputs and drives two clock outputs in a 2:2 arrangement. Its maximum specified frequency is 270 MHz and its supply range is 2.5 V to 5.5 V. It is particularly useful when a system requires a controlled clock-source change or two destinations for the selected clock.
How does ICS580M-01 help reduce clock-switching errors?
ICS580M-01 reduces clock-switching errors by using a dedicated multiplexer and zero-delay buffer function instead of routing clock transitions through ordinary logic gates. The manufacturer description specifies switching between two clock sources without glitches or short pulses. This helps preserve clock waveform integrity during source changes in digital timing and communication systems.
Is ICS580M-01 suitable for a 270 MHz clock?
The ICS580M-01 is specified for operation up to 270 MHz, making it suitable for a 270 MHz clock when the rest of the circuit meets the device’s timing and layout requirements. Check supply voltage, output loading, trace topology, select-control timing, and downstream receiver specifications. Maximum-frequency capability alone does not guarantee acceptable end-to-end timing in every board layout.
What are the key specifications of ICS580M-01 that engineers should know?
The key ICS580M-01 specifications are a 2:2 clock-multiplexer configuration, a maximum frequency of 270 MHz, a 2.5 V to 5.5 V operating-supply range, and a 16-SOIC package. The device includes a zero-delay buffer function and is designed for glitch-free switching between two clock sources. Its two outputs can distribute the selected clock to two destinations.
How do I request a quote for ICS580M-01?
Use the Request a Quote form on this page to request current pricing, stock confirmation, lead time, and order handling for ICS580M-01. The form is the correct channel for commercial information because pricing and inventory can change independently of technical documentation. Include the required quantity, target package suffix, and any qualification or traceability requirements with the request.
What is the lead time for ICS580M-01?
The current lead time for ICS580M-01 should be confirmed through the Request a Quote form on this page. Lead time depends on manufacturer inventory, the exact ordering suffix, quantity, and required delivery terms. The indexed component records identify the part and its 16-SOIC configuration, but they do not provide a stable current lead-time commitment.
Where to buy ICS580M-01 online?
Use the Request a Quote form on this page to request current availability and ordering information for ICS580M-01. The form allows you to specify quantity and the exact ordering suffix, which is important because related variants use different suffixes. Technical selection should be based on the 270 MHz maximum frequency, 2.5 V to 5.5 V supply range, and 16-SOIC package.

کے لیے انجینئرنگ ریفرنس ڈیٹا ICS580M-01 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose ICS580M-01 when the design needs to select between two clock sources, distribute the selected clock to two outputs, and avoid glitch-like narrow pulses during switching. Its stated 270 MHz maximum frequency and 2.5 V to 5.5 V supply range make it a practical choice for digital, communications, FPGA-adjacent, and industrial timing systems. Select ICS580M-01LF or ICS580M-01ILF when a documented same-package, same-terminal ordering variant is needed and the manufacturer comparison confirms the required grade and limits. ICS580M-01I is another listed 16-SOIC candidate for procurement evaluation. The shorter 580M-01LF and 580M-01L forms appear in the same replacement records, but the complete ordering code, temperature range, lifecycle status, and electrical limits should be confirmed before use. No cross-brand drop-in replacement is listed, so do not assume that another manufacturer’s multiplexer can replace this device without a complete footprint, timing, and functional review.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ICS580M-01I ICS580M-01LF ICS580M-01ILF 580M-01LF 580M-01L
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Device Type 2:2 Clock Multiplexer, Zero Delay Buffer IC Clock Multiplexer Clock Multiplexer Clock Multiplexer Clock Multiplexer Clock Multiplexer
Number of Outputs 2 2 2 2 2 2
Switching Behavior No glitches or short pulses Consistent functional characteristics Consistent functional characteristics Consistent functional characteristics Consistent functional characteristics Consistent functional characteristics

اہم امتیازی خصوصیات

  • Combines source selection and two-output fan-out (بمقابلہICS580M-01LF)
  • Supports high-speed clock operation (بمقابلہICS580M-01I)
  • Glitch-free source switching (بمقابلہ580M-01LF)
  • Broad compatible supply range (بمقابلہ580M-01L)

ڈیزائن نوٹس

Route all four clock nets as a matched group and minimize branch stubs, especially because the device supports clocks up to 270 MHz. Keep the unused input terminated according to the manufacturer’s recommended input circuit and avoid leaving a high-speed clock node unterminated. Place the ICS580M-01 close to the receiving circuitry so that clock and select paths are not exposed to unrelated digital switching activity.

Separate the select-control trace from the clock inputs and outputs to reduce coupling into timing-sensitive nodes. Use a continuous ground reference under the clock routes, avoid plane splits beneath high-frequency clock traces, and use the package ground pins as part of a low-impedance return path. The datasheet pin table and recommended layout should control the final net assignment and component placement.

Do not treat a zero-delay-buffer description as permission to omit system timing analysis. The selected clock’s slew rate, output loading, source-switch timing, and downstream receiver requirements must satisfy the complete clock-domain specification. Also verify the exact ordering suffix, operating-temperature grade, and supply limits before using a related 16-SOIC replacement in production.

Follow the manufacturer’s recommended supply-bypass arrangement and place the decoupling capacitor close to the supply and ground pins. Keep the switching current path short and provide an appropriate ground return so clock outputs are not disturbed by supply noise during source changes. Verify the bypass component voltage rating, effective capacitance at the operating frequency, and the ripple profile of the upstream regulator.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The verified product information does not state the requested compliance or material-category results. Confirm these attributes using the current manufacturer product documentation before regulated production use.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-11 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ICS580M-01 datasheet ICS580M-01 pinout ICS580M-01 datasheet pdf ICS580M-01 equivalent ICS580M-01 replacement ICS580M-01 cross reference ICS580M-01 vs ICS580M-01LF ICS580M-01 270MHz clock multiplexer ICS580M-01 16-SOIC footprint ICS580M-01 application circuit ICS580M-01 price ICS580M-01 stock Renesas ICS580M-01 what is ICS580M-01

متعلقہ اجزاء اور اصطلاحات

Renesas Electronics ICS580M-01 ICS580M-01I ICS580M-01LF ICS580M-01ILF 580M-01LF 580M-01L clock multiplexer zero-delay buffer clock buffer clock and timing IC semiconductor 2:2 multiplexer 270 MHz 2.5 V to 5.5 V 16-SOIC SOIC package family surface-mount package glitch-free switching dual-source clock selection clock distribution digital system timing FPGA clocking telecommunications timing
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں