Renesas Electronics

ICS613MT - 157.5MHz Low-Phase-Noise Clock Multiplier | Renesas

MPN: ICS613MT ✗ اختتامِ زندگی
16-SOIC Package 157.5MHz Speed
MOQ: 1 |

ICS613MT جائزہ

Renesas ICS613MT is a low-phase-noise clock multiplier and frequency synthesizer with a maximum operating frequency of 157.5MHz. The device accepts clock or crystal inputs, includes a PLL, and provides a CMOS clock output in a 16-SOIC package. Its nominal input-to-output ratio is 2:2, making it suitable for systems that require a multiplied or regenerated clock with low phase noise and low jitter.

A clock multiplier is a type of clock and timing integrated circuit that multiplies an input frequency while preserving the required phase relationship between input and output. Clock multipliers and frequency synthesizers form part of the wider clock generation, timing control, and power management hierarchy used to distribute precise timing signals among processors, communication links, converters, and data-conversion systems.

The ICS613MT combines a PLL-based architecture with a maximum frequency of 157.5MHz. Its input section supports either a clock or crystal source, while the single CMOS output stage provides a compatible interface for digital timing circuits. The 2:2 ratio provides a straightforward multiplication relationship, reducing the need to redesign the surrounding clock tree when a higher-frequency reference is required.

Phase noise and jitter are critical in high-speed digital systems because timing uncertainty limits usable bandwidth, increases communication error margins, and can degrade the effective resolution of converters. The ICS613MT is positioned as a low-cost, low-phase-noise clock synthesizer for applications requiring low phase noise and low jitter. Its single-clock architecture also helps simplify routing and reduces the number of independent timing branches that must be controlled on the PCB.

Typical uses include communications infrastructure, clocked data converters, digital signal processing modules, industrial control equipment, and embedded systems that require a deterministic local clock source. The device is also applicable when an existing low-frequency reference must be converted into a higher-frequency timing signal without relying on a more complex frequency synthesizer.

The primary design consideration is the relationship between the input source, crystal or clock requirements, and the intended output frequency. PCB layout should preserve a short and controlled path from the timing source to the input pins and from the device to the load. Power-supply decoupling, output fanout, and return-path continuity should be evaluated together because clock edges must remain clean at the receiver.

This product overview consolidates the ICS613MT clocking function, package information, key electrical characteristics, design guidance, sourcing information, and the limits of currently documented replacement options. Engineers should use the manufacturer datasheet for final pin assignments, recommended application circuits, operating limits, and timing parameters before releasing a production design.

کے لیے ڈراپ اِن متبادل ICS613MT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

ICS613MT تفصیلات

Product Type Clock/Frequency Synthesizer
PLL Yes
Input Type Clock or crystal
آؤٹ پٹ کی قسم CMOS
Maximum Frequency 157.5MHz
Number of Circuits 1 circuit
Input-to-Output Ratio 2:2
Package Type 16-SOIC
Package Width 3.90mm
Package Body Length 0.154 inch
ماؤنٹنگ ٹائپ Surface mount
Clocking Function Low-phase-noise clock multiplier
Phase Noise Low phase noise
Jitter Low jitter

ICS613MT 0.154 inch پن کنفیگریشن گائیڈ

ICS613MT (0.154 inch پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ICS613MT کے لیے 0.154 inch پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ICS613MT.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ICS613MT کے لیے موزوں ہے 6 ایپلیکیشنs: Communications Clock Distribution, ADC and DAC Sampling Clock, Digital Signal Processing Clock Tree, Industrial Control and Instrumentation, FPGA and Processor Timing, High-Speed Embedded Systems.

🌐

Communications Clock Distribution

The ICS613MT fits communication modules that need a local, multiplied clock with low phase noise and low jitter. Its PLL architecture accepts a clock or crystal reference, and the 2:2 nominal ratio provides a straightforward conversion to a higher-frequency timing signal. The CMOS output can feed a receiver, ADC, DAC, or FPGA clock input when the source impedance and load are compatible. Because timing jitter can affect link margin and conversion accuracy, the reference oscillator, supply decoupling, and output trace should be treated as one clock path. Use short routes, continuous ground planes, and termination matched to the receiving input rather than treating the clock as an ordinary low-frequency control signal.

📡

ADC and DAC Sampling Clock

ICS613MT can provide a cleaner multiplied reference for mixed-signal systems that require deterministic sampling timing. The PLL-based clock synthesizer supports clock or crystal input, while the CMOS output and 157.5MHz maximum frequency cover applications operating below that limit. A low-jitter clock helps preserve the timing margin of successive-approximation, pipeline, and mixed-signal converters, provided the converter's aperture requirement is satisfied. The reference must remain stable over the converter’s acquisition interval, and the clock should be routed directly to the clock input with minimal stubs. Power and ground arrangements around the converter and multiplier should prevent switching activity from coupling into the reference or timing traces.

🖥️

Digital Signal Processing Clock Tree

The ICS613MT is applicable to digital signal processing boards that require a predictable local clock derived from a lower-frequency source. Its 2:2 nominal ratio, low-phase-noise PLL architecture, and single CMOS output support clock-tree branches for DSPs, memory interfaces, and data converters. Low phase noise and low jitter are valuable when processing margins are limited or when timing errors accumulate across a chain of synchronous operations. The implementation should keep the reference and output paths away from high-current switching nodes, use a solid ground reference, and verify rise and fall behavior at the actual receiver. Crystal versus external-clock selection should follow the manufacturer reference design to maintain reliable startup and phase performance.

🏭

Industrial Control and Instrumentation

ICS613MT can support deterministic timing in industrial controllers, measurement instruments, and data-acquisition systems that synchronize sensors, converters, and digital processing blocks. A local PLL multiplier allows a stable reference to drive multiple timing functions without depending on a remote clock distribution network. The low-noise CMOS output is suitable for short, properly terminated routes to compatible digital inputs. Industrial equipment often places the timing circuit near switching regulators, relays, and high-energy analog stages, so layout quality remains essential. Separate the clock reference from noisy power paths, maintain continuous return current, and validate operation across the intended input frequency and load range. The 16-SOIC package also supports conventional surface-mount assembly.

🧩

FPGA and Processor Timing

The ICS613MT may be used to generate a multiplied clock for an FPGA, processor, programmable logic device, or high-speed interface in systems that accept a CMOS clock. Its PLL-based synthesis and low-jitter positioning help produce cleaner edges than an unbuffered divider or long passive clock network. The 157.5MHz maximum frequency makes the device relevant to clock trees operating at or below that limit, but the receiver’s minimum and maximum clock requirements must be checked. Route the output to the intended clock-capable pin, avoid accidental use as a general-purpose signal, and maintain a low-impedance ground reference. Power-supply bypass placement and output-load assumptions should be verified against the manufacturer application guidance.

🔧

High-Speed Embedded Systems

ICS613MT can provide a local timing signal for embedded systems that multiply a lower-frequency crystal or oscillator to drive internal logic, converters, or communication sections. Its single-circuit architecture reduces the number of separate clock-generation blocks when the required ratio is compatible with the 2:2 relationship. Low phase noise and low jitter benefit timing-critical control loops and serial interfaces, while the CMOS output simplifies connection to digital receivers. Designers should account for clock distribution loading, receiver thresholds, and the required startup behavior of the selected source. The device should be positioned near the timing load when trace length or crosstalk could affect edge quality, and sensitive reference routing should avoid proximity to motors, relays, power inductors, and high-di/dt nodes.

What is the ICS613MT and what does it do?
The ICS613MT is a low-phase-noise clock multiplier and frequency synthesizer with one PLL, a clock-or-crystal input, and a CMOS output. According to the manufacturer datasheet, it is intended for applications requiring low phase noise and low jitter. Its maximum operating frequency is 157.5MHz, and its nominal input-to-output ratio is 2:2, allowing it to generate a higher-frequency clock from a lower-frequency reference.
What are the key specifications of ICS613MT that engineers should know?
The ICS613MT is a 157.5MHz maximum-frequency clock synthesizer with one PLL, clock-or-crystal input, CMOS output, and a 2:2 nominal input-to-output ratio. It is packaged in a 16-SOIC and is positioned for low-phase-noise, low-jitter operation. These characteristics make it relevant to communication, converter-clocking, digital-signal-processing, and embedded clock-tree designs where edge timing quality matters.
What is the maximum operating frequency of ICS613MT?
The ICS613MT operates up to 157.5MHz, as specified in the manufacturer datasheet listing. The device is a clock/frequency synthesizer with PLL capability, a clock-or-crystal input, and a CMOS output. When designing a clock tree around the ICS613MT, confirm the required output frequency against the complete operating table and associated timing limits in the manufacturer datasheet.
Where can I find the ICS613MT pinout and datasheet?
The ICS613MT datasheet and pinout information are available through the linked Octopart datasheet record and the listed manufacturer-associated documentation. The component uses a 16-SOIC package. Use the pin-description table and recommended application circuit in the manufacturer datasheet when assigning PCB nets, especially for the clock or crystal input, PLL support components, power rails, and CMOS output.
Is ICS613MT suitable for low-jitter clock generation?
Yes, ICS613MT is specifically described as a low-phase-noise clock multiplier for applications requiring low phase noise and low jitter. Its PLL-based architecture, maximum frequency of 157.5MHz, and CMOS output suit it for precision timing in communications, data conversion, and digital signal processing. Final suitability still depends on the reference source, loop configuration, layout, and load presented by the receiving circuit.
Does ICS613MT accept both a crystal and an external clock?
The ICS613MT accepts either a clock or a crystal as its input, as stated in the manufacturer datasheet specifications. The PLL then supports the internal frequency multiplication and synthesis functions. Select the appropriate input configuration using the reference-design and application-circuit guidance in the datasheet, because crystal amplitude, load capacitance, and external-clock amplitude requirements affect startup and timing performance.
Where can I buy ICS613MT online and request a quote?
The ICS613MT can be requested through the Request a Quote form on this product page. The form is the direct route for checking availability, MOQ, lead time, and the exact ICS613MT suffix being requested. Because lifecycle and inventory conditions can change, engineers should request the current status for the 16-SOIC ordering code instead of assuming continued production or generic equivalent availability.
What is the price of ICS613MT?
Current pricing for ICS613MT is handled through the Request a Quote form on this page. Quote processing accounts for the exact ordering code, quantity, and current market conditions. This avoids publishing a stale unit price or confusing the 16-SOIC ICS613MT with other clock multipliers in the same product family.
What is the lead time for ICS613MT?
The current lead time for ICS613MT should be confirmed through the Request a Quote form on this page. The exact suffix, package, order quantity, and production status must be reviewed before committing a schedule. Request the manufacturer or authorized-channel availability statement with the quotation so that obsolete or constrained inventory is not mistaken for a production-supported allocation.
Is ICS613MT in stock?
ICS613MT inventory status should be checked through the Request a Quote form on this page. The form supports a quantity-specific review of current availability and lead time for the exact 16-SOIC part. Because this clock multiplier is listed as obsolete, engineers should also request lifecycle and last-time-buy information before designing a new production run around it.
What can replace the ICS613MT on an existing PCB?
No drop-in replacement for the ICS613MT is established by the current substitution records, so engineers should not assume that any clock multiplier is pin-compatible. A valid replacement must match the 16-SOIC footprint, pin functions, input configuration, 2:2 ratio, maximum operating frequency, CMOS output, and low-noise behavior. Use the Request a Quote form to request a reviewed source or obtain manufacturer guidance.
Is ICS613MT the same as a generic PLL clock multiplier?
No. The ICS613MT is a specific PLL-based clock multiplier with clock-or-crystal input, a CMOS output, a 2:2 nominal ratio, a 157.5MHz maximum frequency, and a 16-SOIC package. A generic PLL may reproduce only the multiplication function, but matching the function alone is insufficient for a drop-in replacement because pin assignment, reference configuration, output behavior, and timing specifications must also align.
When should I choose ICS613MT instead of a different clock synthesizer?
Choose the ICS613MT when the design specifically calls for a low-phase-noise, low-jitter multiplier using a 2:2 nominal ratio, clock or crystal input, CMOS output, and a 16-SOIC footprint. It is less appropriate for new designs requiring a programmable multi-output clock tree, unusual division ratios, or a currently supported lifecycle status. Those requirements favor a currently supported clock-generator family rather than a functional substitute.
Is ICS613MT suitable for communication and data-conversion systems?
The ICS613MT can suit communication, converter, and digital-signal-processing clock paths because it provides low phase noise, low jitter, PLL multiplication, and a CMOS output up to 157.5MHz. Its suitability depends on the required frequency range, reference quality, output drive, and system jitter budget. Review the complete timing and application data in the manufacturer datasheet before fixing the reference and distribution topology.
What design considerations apply to the ICS613MT clock input?
The ICS613MT clock input should be driven by a clean, stable reference with the amplitude and edge quality appropriate for the selected clock or crystal configuration. Keep the input path short, provide a low-impedance return, and place any required crystal or support components close to the device. Poor reference edges, ground discontinuities, or unstable power can degrade phase noise and jitter even when the nominal output frequency is correct.
What is the best cross-brand equivalent for ICS613MT?
No cross-brand equivalent is established as a verified, pin-to-pin replacement for the ICS613MT. A candidate must match the 16-SOIC pinout, PLL architecture, 2:2 nominal ratio, clock or crystal input, CMOS output, and 157.5MHz maximum-frequency class. Submit candidate MPNs through the Request a Quote form for engineering review; matching package dimensions alone does not establish drop-in compatibility.

کے لیے انجینئرنگ ریفرنس ڈیٹا ICS613MT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ICS613MT only when the design needs a 16-SOIC clock multiplier with a 2:2 nominal ratio, clock-or-crystal input, CMOS output, operation up to 157.5MHz, and low phase noise and jitter. It is particularly relevant to legacy communication, converter-clocking, DSP, and embedded systems whose reference configuration and timing requirements already match this device. No verified same-package drop-in alternatives are identified, so an engineer should not substitute a generic PLL solely because its frequency range looks similar. For a new design, first compare the ICS613MT against currently supported clock-generator families with programmable ratios, multiple outputs, current lifecycle status, and the required operating range. If the ICS613MT must be replaced, validate footprint, every pin function, reference startup, ratio, output type, maximum frequency, phase noise, jitter, and load behavior at the system boundary before approval.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Renesas Electronics
Package 16-SOIC
Product Type Clock/Frequency Synthesizer
PLL Yes
Input Type Clock or crystal
Output Type CMOS
Maximum Frequency 157.5MHz
Number of Circuits 1 circuit
Input-to-Output Ratio 2:2
Phase Noise Low phase noise
Jitter Low jitter

اہم امتیازی خصوصیات

  • Low-phase-noise clock multiplication (بمقابلہNo verified drop-in alternative)
  • Flexible reference selection (بمقابلہNo verified drop-in alternative)
  • Compact timing solution (بمقابلہNo verified drop-in alternative)

ڈیزائن نوٹس

Place the ICS613MT close to the clock source and the intended clock receiver. Keep the reference and output traces short, avoid stubs, provide a continuous ground plane beneath the timing path, and keep the route away from switching-node copper and high-di/dt power traces. If the output drives a long trace or multiple loads, use a clock buffer or repeater rather than relying on the multiplier output to compensate for excessive loading.

Use the manufacturer application circuit as the basis for crystal or external-clock configuration. An external clock must meet the required amplitude, frequency, and edge characteristics, while a crystal installation must follow the specified load capacitance and layout. Keep support-component loops compact, use a low-impedance supply and ground connection, and measure the resulting edge at the receiver when timing margin is sensitive.

Do not treat a generic PLL with similar frequency capability as a drop-in substitute. A valid replacement must preserve the 16-SOIC pin functions, 2:2 nominal ratio, clock-or-crystal input behavior, CMOS output characteristics, and required timing performance. Verify the maximum operating frequency against the manufacturer’s complete operating table, and confirm startup behavior across the intended supply, temperature, reference, and load conditions before production release.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Lifecycle is listed as obsolete, and no verified compliance declarations or automotive qualification statement were identified.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-11 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ICS613MT ICS613MT datasheet ICS613MT datasheet pdf ICS613MT pinout ICS613MT specifications ICS613MT 157.5MHz ICS613MT equivalent ICS613MT replacement ICS613MT price ICS613MT stock ics613 hide01 ics613 review

متعلقہ اجزاء اور اصطلاحات

Renesas Electronics ICS613MT clock multiplier frequency synthesizer PLL clock generator timing integrated circuit semiconductor CMOS clock or crystal input phase noise jitter 157.5MHz 2:2 input-to-output ratio 16-SOIC SOIC package family surface-mount package communication clocking ADC sampling clock DAC sampling clock digital signal processing FPGA clock tree industrial instrumentation embedded system timing
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں