Texas Instruments

INA114AU/1K - 1MHz Precision Instrumentation Amplifier | TI

MPN: INA114AU/1K ✓ فعال
50 µV Vdss 3 mA Id 16-pin SOIC Package
MOQ: 1 |

INA114AU/1K جائزہ

Texas Instruments INA114AU/1K is a single-channel precision instrumentation amplifier featuring 1 MHz gain-bandwidth product, 50 µV typical offset voltage, 11 nV/√Hz input noise density, and 3 mA power consumption. The device is packaged in a 16-pin SOIC and accepts supply voltages as low as ±2.25 V. A single external resistor sets the gain from 1 to 10,000, allowing the same circuit topology to serve low-gain signal conditioning and high-gain bridge-amplifier applications.

An instrumentation amplifier is a specialized analog signal-conditioning IC designed to amplify the voltage difference between two inputs while rejecting common-mode signals. Its typical hierarchy is instrumentation amplifier → differential amplifier → analog amplifier → semiconductor. This category is especially useful when a low-level sensor output must be measured in the presence of a larger shared voltage. The INA114 uses a three-op-amp architecture, which provides high input impedance, flexible gain control, and accurate differential amplification.

The INA114's principal electrical features include a 1 MHz gain-bandwidth product, 110 dB dynamic range as identified in the manufacturer listings, 50 µV typical offset, and 11 nV/√Hz input noise density. A single gain-setting resistor establishes gains between 1 and 10,000, eliminating the need for a resistor network. The device can operate with power supplies as low as ±2.25 V and supports dual supplies up to ±18 V. Internal input protection can withstand input voltages up to ±40 V without damage, adding robustness in industrial measurement systems.

Internally, the INA114 uses a versatile three-op-amp instrumentation-amplifier arrangement. Its input stage preserves the differential signal while the output stage develops the selected gain and drives the output relative to the REF pins. The laser-trimmed internal resistors support low offset and consistent performance without user calibration. The manufacturer identifies the INA114 as a low-cost, general-purpose precision device, while its 1 MHz bandwidth allows it to handle signals substantially faster than static low-frequency sensor outputs.

Typical uses include bridge and strain-gauge signal conditioning, current-shunt measurement, low-level sensor interfaces, laboratory instrumentation, and industrial process-control inputs. It is particularly appropriate when a sensor develops only millivolts or microvolts and common-mode voltage can be much larger than the desired signal. The adjustable gain also supports transducers with widely different output sensitivities without changing the surrounding analog topology.

When laying out the circuit, connect the gain resistor between the designated RG pins and place input, supply, and reference bypassing capacitors close to the associated package pins. Keep sensitive input traces short, route them away from switching nodes, and use a stable low-noise reference when an offset voltage other than ground is required. Confirm input and output common-mode ranges over the complete supply range because the selected gain reduces allowable output swing.

This page combines manufacturer specifications, exact-order information, a same-package electrical alternative, and practical design guidance. It also distinguishes reel-packaged ordering variants from genuinely different functions, helping engineers make a defensible selection without relying on package code alone.

کے لیے ڈراپ اِن متبادل INA114AU/1K — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں INA114AU/1K (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Amplifier Type, Package.

Texas Instruments
Amplifier Type: Single-amplifier precision instrumentation amplifier
Package: 16-pin SOIC, 3.9 mm wide

INA114AU

✅ ڈراپ-اِن
Texas Instruments
📦 16-pin SOIC
Single-amplifier precision instrumentation amplifier · 1 MHz · 11 nV/√Hz · 50 µV · 0.25 µV/°C · 2 nA · 115 dB · ±40 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

INA114AU/1K زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Precision instrumentation amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 1 MHz
Typical Offset Voltage 50 µV
Input Noise Density 11 nV/√Hz
کوئیسینٹ کرنٹ 3 mA
Gain Range 1 to 10,000
Gain Configuration One external resistor
Minimum Total Supply Voltage ±2.25 V
Maximum Total Supply Voltage ±36 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Internal Input Protection ±40 V
Architecture Three-op-amp design
Dynamic Range 110 dB
پیکیج 16-pin SOIC
ماؤنٹنگ ٹائپ Surface mount
Orderable Package Option 16-pin SOIC tape and reel

INA114AU/1K پن کنفیگریشن

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
پن 1 RG — Gain resistor connection
پن 2 IN- — Inverting input
پن 3 IN+ — Noninverting input
پن 4 V- — Negative supply connection
پن 5 REF1 — Reference input 1
پن 6 REF2 — Reference input 2
پن 7 V+ — Positive supply connection
پن 8 OUT — Amplified output
پن 9 RG — Gain resistor connection
پن 10 NC — Not connected
پن 11 NC — Not connected
پن 12 NC — Not connected
پن 13 NC — Not connected
پن 14 NC — Not connected
پن 15 NC — Not connected
پن 16 NC — Not connected

عام استعمالات

INA114AU/1K کے لیے موزوں ہے 6 ایپلیکیشنs: Strain-Gauge Bridge Signal Conditioning, Current-Shunt Measurement, Precision Sensor Front Ends, Laboratory Instrumentation, Industrial Process-Control Inputs, Audio and Communications Interfaces.

🏭

Strain-Gauge Bridge Signal Conditioning

The INA114AU/1K fits strain-gauge and resistive-bridge measurement because its gain can be set from 1 to 10,000 with one external resistor. The 50 µV typical offset helps preserve accuracy when the useful bridge imbalance is small, while 11 nV/√Hz input noise supports low-level sensor work. Place the device across the bridge excitation return and differential outputs, with short input traces and local supply bypassing. Verify output headroom at the selected gain because higher amplification reduces the allowable output range relative to the supply rails.

⚡

Current-Shunt Measurement

The INA114AU/1K is appropriate for measuring the small voltage generated by a current-sense shunt while rejecting the shunt's common-mode voltage. Its differential three-op-amp architecture supports the required subtraction, and the adjustable gain from 1 to 10,000 can compensate for shunt resistance and full-scale current. The 1 MHz bandwidth accommodates rapidly changing current waveforms, while 3 mA power consumption suits compact power converters. Keep the shunt connections short and pair them with a ground-referenced reference configuration unless bidirectional current requires an offset reference.

🧩

Precision Sensor Front Ends

The INA114AU/1K provides a practical analog front end for low-level pressure, temperature, position, and chemical sensors whose outputs are smaller than their common-mode voltage. Gain can be adapted by replacing one resistor rather than redesigning the amplifier network, and the 50 µV typical offset reduces signal-chain error. The 11 nV/√Hz noise density is useful for low-noise sensor conditioning, although the 1 MHz bandwidth should be evaluated against the sensor's noise bandwidth. Stable bypassing and careful grounding are necessary to preserve the precision promised by the instrumentation-amplifier architecture.

🔧

Laboratory Instrumentation

The INA114AU/1K suits laboratory front ends that amplify weak differential signals generated by sensors, transducers, or diagnostic fixtures. Its gain can span 1 to 10,000, allowing one design to cover multiple measurement ranges, and the 1 MHz bandwidth is sufficient for many dynamic bench signals. The low 3 mA power consumption supports portable instruments, while operation from ±2.25 V permits lower-voltage designs. Use the REF pins to establish the output midpoint in bipolar or single-supply systems and validate input and output swing at the highest gain used.

🏭

Industrial Process-Control Inputs

The INA114AU/1K can condition low-level process signals before they enter industrial controllers or data-acquisition systems. Its 1 MHz bandwidth handles more than static sensor readings, and internal input protection up to ±40 V improves tolerance of wiring transients. The single-resistor gain setting supports different transducers without complex analog switching. For reliable operation, maintain common-mode operation within the range allowed by the selected gain, isolate sensitive traces from motor and relay wiring, and use local supply decoupling to prevent switching disturbances from entering the measurement path.

🌐

Audio and Communications Interfaces

The INA114AU/1K can amplify low-level balanced audio or communications signals when common-mode rejection is more important than absolute ground referencing. Its three-op-amp differential design reduces unwanted common-mode pickup, while gain can be increased to 10,000 for weak sources. The 1 MHz bandwidth exceeds the audible range and also supports higher-bandwidth communication waveforms. The trade-off is that the selected gain reduces output swing, so the source amplitude, input common-mode voltage, reference level, and output clipping must be checked together before deployment.

تجویز کردہ پروڈکٹس کا خلاصہ

INA114AU Texas Instruments استعمال ہوتا ہے: Strain-Gauge Bridge Signal Conditioning, Current-Shunt Measurement, Precision Sensor Front Ends, Laboratory Instrumentation, Industrial Process-Control Inputs, Audio and Communications Interfaces INA114 Same precision instrumentation-amplifier family استعمال ہوتا ہے: Strain-Gauge Bridge Signal Conditioning, Current-Shunt Measurement, Precision Sensor Front Ends, Laboratory Instrumentation, Industrial Process-Control Inputs, Audio and Communications Interfaces
What are the key specifications of INA114AU/1K that engineers should know?
The INA114AU/1K is a single-channel precision instrumentation amplifier with a 1 MHz gain-bandwidth product, 50 µV typical offset voltage, 11 nV/√Hz input noise density, and approximately 3 mA power consumption. It supports gains from 1 to 10,000 through one external resistor and operates from power supplies as low as ±2.25 V. According to the Texas Instruments INA114 product page and manufacturer datasheet, the device is available in a 16-pin SOIC package and is specified from -40 °C to +85 °C.
Where can I download the INA114AU/1K datasheet PDF?
The official INA114AU/1K datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ina114.pdf. The document contains the electrical characteristics, gain-setting information, pin descriptions, application details, and package information for the INA114 family. The manufacturer also provides a dedicated product page for INA114 and an ordering page for the INA114AU/1K tape-and-reel configuration.
What is the operating voltage range of INA114AU/1K?
The INA114AU/1K operates with dual power supplies as low as ±2.25 V and supports voltages up to ±18 V, corresponding to a maximum total supply of 36 V. This makes the device suitable for low-voltage analog systems as well as conventional dual-supply instrumentation. According to the Texas Instruments INA114 ordering information, the minimum and maximum operating supply levels are ±2.25 V and ±18 V, respectively.
How is the gain of the INA114AU/1K configured?
The INA114AU/1K uses one external resistor to set the gain anywhere from 1 to 10,000. According to the manufacturer datasheet, the resistor is connected between the two gain-control pins designated RG. The selected resistor value establishes the closed-loop gain, allowing the same printed-circuit-board layout to support different sensor sensitivities by changing only one component.
Where can I find the INA114AU/1K pinout?
The INA114AU/1K pinout is documented in the pin-configuration section of the official Texas Instruments INA114 datasheet. The 16-pin SOIC package includes the differential input terminals, gain-control terminals, reference terminals, supply connections, and output. Assigning PCB tracks according to the package drawing and datasheet pin table prevents errors at the exposed functional pins and maintains compatibility with the INA114 family.
What can replace the INA114AU/1K on an existing PCB?
The INA114AU is the closest same-package electrical replacement for the INA114AU/1K because both use the 16-pin SOIC and implement the same INA114 function. The principal distinction is the orderable packaging code, so engineers should verify reel or tape requirements before substitution. A cross-brand replacement should be selected only after confirming the pin assignment, gain resistor connection, supply range, common-mode limits, and timing specifications.
Is INA114AU/1K suitable for strain-gauge and bridge measurements?
Yes, the INA114AU/1K is suitable for strain-gauge and bridge measurements because it offers gains from 1 to 10,000, low offset voltage, and low input noise density. The three-op-amp architecture is intended for precision differential signal conditioning. The practical benefit is that a millivolt-level bridge imbalance can be amplified without introducing a large common-mode signal into the measurement, although the selected gain must preserve valid output swing.
What is the difference between INA114AU and INA114AU/1K?
The INA114AU and INA114AU/1K are both orderable INA114 variants in a 16-pin SOIC and share the same core precision instrumentation-amplifier function. The orderable suffix identifies the packaging configuration, with the INA114AU/1K listing identifying a tape-and-reel format. Texas Instruments lists both INA114AU and INA114AU/1K, but the exact ordering page should govern production quantities and shipment format.
When should I choose INA114AU/1K instead of a lower-bandwidth instrumentation amplifier?
Choose the INA114AU/1K when the measurement path needs a 1 MHz gain-bandwidth product rather than only a slow DC or low-frequency response. Its 11 nV/√Hz input noise density, 50 µV typical offset, and adjustable gain make it appropriate for low-level dynamic sensor signals. A lower-bandwidth device may be preferable only when the application explicitly requires lower noise over a narrower bandwidth and has no need for the INA114's wider signal range.
Can the INA114AU/1K operate from a single 5 V supply?
The INA114AU/1K can operate from a single 5 V supply, provided its total supply requirements are met and the input and output common-mode ranges remain valid at the selected gain. The manufacturer explicitly identifies operation from power supplies as low as ±2.25 V for battery-operated and single 5 V systems. The reference pins should be configured appropriately, commonly to ground for a single-supply design, subject to the input and output range limits.
What is the input protection capability of the INA114AU/1K?
The INA114AU/1K includes internal input protection that can withstand voltages up to ±40 V without damage. This feature improves robustness when sensor wiring may experience transients or accidental overvoltage. According to the manufacturer datasheet, it is protection for the input stage rather than permission to exceed the device's normal operating input and output ranges, so normal signal amplitudes should remain within the specified limits.
How does the INA114AU/1K compare with the INA122UA?
Both devices are single-channel precision instrumentation amplifiers, but their gain architectures and operating details differ. The INA114AU/1K reaches a 1 MHz gain-bandwidth product, supports gains from 1 to 10,000, and includes input protection up to ±40 V. The INA122UA is shown in comparison listings with the same broad supply-voltage class, but it does not provide evidence of being a pin-for-pin INA114AU/1K substitute. A board-level replacement therefore requires a direct pin and gain-configuration comparison.
Where can I buy INA114AU/1K and check its current availability?
Use the Request a Quote form on this page to request the INA114AU/1K, current lead time, order quantity, and reel packaging requirements. Manufacturer and distributor listings identify the part as an active Texas Instruments instrumentation amplifier in a 16-pin SOIC. Because inventory and commercial terms can change quickly, submit the exact MPN through the page form rather than relying on a static availability statement.
What is the price of the INA114AU/1K?
The current commercial price of the INA114AU/1K should be requested through the Request a Quote form on this page using the exact MPN. The form allows quantity, delivery, and packaging requirements to be included in the request. This avoids presenting a stale fixed price and supports fulfillment of the tape-and-reel configuration identified by the INA114AU/1K order code.
What is the lead time for the INA114AU/1K?
The current lead time for the INA114AU/1K should be confirmed through the Request a Quote form on this page. Include the required order quantity, shipment destination, and whether partial reel quantities are acceptable. Texas Instruments identifies INA114AU/1K as an orderable 16-pin SOIC variant, but order-specific production and logistics timing must be confirmed at quotation.
Is the INA114AU/1K in stock?
Current INA114AU/1K inventory should be checked through the Request a Quote form on this page by entering the exact part number and required quantity. Manufacturer and distributor product pages confirm that INA114AU/1K is an orderable catalog part, but inventory can vary by region, quantity, and packaging format. A quotation response provides the most current stock and lead-time commitment for the requested reel quantity.

کے لیے انجینئرنگ ریفرنس ڈیٹا INA114AU/1K — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the INA114AU/1K when the design requires a low-noise, precision instrumentation amplifier in a 16-pin SOIC and the required production format is tape and reel. Its 1 MHz gain-bandwidth product is suitable for dynamic low-level signals, while its 1-to-10,000 gain range covers bridge, shunt, and sensor-conditioning applications. The INA114AU is the closest same-package alternative and provides equivalent core electrical specifications; select it when its orderable packaging format better matches procurement. For a single 5 V implementation, verify the input and output common-mode ranges at the intended gain. For higher gain, use the REF pins carefully to establish the correct output midpoint. Do not select AD627BRZ-RL, AMP02FSZ, INA111BU, or INA114AP merely because they perform similar amplification functions; their package or pin arrangements do not establish drop-in compatibility with the 16-pin INA114AU footprint.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ INA114AU
Brand Texas Instruments Texas Instruments
Package 16-pin SOIC 16-pin SOIC
Function Precision instrumentation amplifier Precision instrumentation amplifier
Channels 1 channel 1 channel
Gain-Bandwidth Product 1 MHz 1 MHz
Offset Voltage 50 µV typical 50 µV typical
Input Noise Density 11 nV/√Hz 11 nV/√Hz
Gain Range 1 to 10,000 1 to 10,000
Minimum Supply ±2.25 V ±2.25 V
Operating Temperature -40 °C to +85 °C -40 °C to +85 °C

اہم امتیازی خصوصیات

  • Combines precision gain control with a 1 MHz bandwidth (بمقابلہINA114AU)
  • Single-resistor gain programming simplifies analog layouts (بمقابلہINA114AU)
  • Low-noise precision suitable for differential sensing (بمقابلہINA114AU)

ڈیزائن نوٹس

Route the IN+ and IN- connections as a closely coupled differential pair and keep them short, away from switching nodes, relay contacts, and high-current paths. Place the gain-setting resistor directly between the two RG pins, and place supply-bypass capacitors close to V+ and V-. The 16-pin SOIC has only eight functional connections, but the unused pins must remain unconnected according to the manufacturer pin description.

The INA114 is specified for dual supplies from ±2.25 V to ±18 V. In a single-supply design, verify that the input common-mode voltage and output swing remain valid at the chosen gain. The REF pins establish the output reference; grounding them provides a ground-centered output, while another reference level may be required for biased or bidirectional measurements. Do not exceed the normal operating supply range even though the input stage can withstand transient voltages up to ±40 V.

Use a compact ground reference and avoid introducing copper paths that share current with motors, relays, or switching regulators. Low-level bridge and shunt measurements are particularly sensitive to ground gradients. Keep the gain resistor physically close to the device, use short input traces, and evaluate the total noise bandwidth: the 1 MHz gain-bandwidth capability is useful for dynamic signals, but the lowest noise is obtained by restricting the bandwidth to the measurement requirement.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer product information identifies the INA114 as a general-purpose precision instrumentation amplifier, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is present in the cited product information.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ina114au datasheet INA114AU/1K datasheet INA114AU/1K datasheet pdf INA114AU/1K pinout INA114AU/1K application circuit INA114AU/1K equivalent INA114AU/1K replacement INA114AU/1K cross reference INA114AU/1K vs INA114AU Texas Instruments INA114AU/1K INA114AU/1K price INA114AU/1K stock INA114AU 16-pin SOIC pinout INA114 precision instrumentation amplifier

متعلقہ اجزاء اور اصطلاحات

Texas Instruments INA114 INA114AU/1K INA114AU INA122UA precision instrumentation amplifier differential amplifier analog amplifier semiconductor three-op-amp architecture gain-bandwidth product input noise density offset voltage common-mode rejection bridge sensor current-shunt measurement gain-setting resistor reference pins 16-pin SOIC SOIC family surface-mount package RoHS REACH AEC-Q100
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں